TS1702 when i try to purchase in app items i get a message that says purchase could not be completed.
what causes this message. all of my account info is correct. why cant i purchase in app items?
If you are also getting a message to contact iTunes Support then you can do so via this page and ask them for help (most of us on here are fellow users, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
Similar Messages
-
When I try to update my apps, I keep getting the message that there is a problem with my billing information even though this is the billing information I have always used in purchasing my apps. What do I do?
You probably need to confirm the security code of your CC. Log into your account an input this, even if it's already there.
-
when i try to redeem my itunes cards, i get a message that says my session has timed out--i installed the latest version of itunes and tried again--no luck--what else can i do?
The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.
-
When I try to back up my Iphone, I get a message that My Iphone can not be backed up on my computer. My computer is authorized and I have been successful with this in the past. I uninstalled Itunes and reinstalled the lastest version and the same problem occurs.
If you are running Tiger, you don't have time machine.
You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups. The free versions do a lot and you can upgrade to the full-service versions for small change if you need more. The one time I used SuperDuper! for cloning a volume it worked just fine.
(My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.) -
I get a message that says: your account is not valid for use in the U.S. store. You must switch to the Canadian store be purchasing. I'm close to the border would that cause the switch because it does it automatically. Should I contact my internet provider help.
What store should you be using? If you should be using the Canadian store, try changing it in the settings.
Settings>iTunes and App Stores>Apple ID
Tap your ID
Tap View Apple ID
Enter your password
Go to country/region in the popup window to change the store -
I also get a message that says the Apple Mobile Device Support cannot be removed.
then Itunes ends the installation due to errors.
These two files show up in the control panel and when I try to delete them it says they are on a network resource that is unavailable.(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Application Support entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, and Restart the PC. Try another iTunes install. Does it go through properly this time? -
When I try to got to a website I get a message that says 403-forbidden error
this is what I get when I try to go to a website...
403 - Forbidden Error
You are not allowed to access this address.
If the error persists, please contact the website webmaster.
If you are the webmaster of this site please log in to Cpanel and check the Error Logs. You will find the exact reason for this error there.
Common reasons for this error are:
* Incorrect file/directory permissions: Below 644.
In order files to be read by the webserver, their permissions have to be equal or above 644. You can update file permissions with a FTP client or through cPanel's File Manager.
* Restrictive Apache directives inside .htaccess file.
There are two Apache directives which can cause this error - 'Deny from' and 'Options -Indexes'.
how can I fix this?Carmell-
When I've had a similar problem, it was because I was accessing the iTunes store from a device I hadn't used before, such as when I upgraded from an iPad 1 to the iPad 2. It was a little confusing to me until I figured it out.
All I had to do was use the ID of my existing account and play along with the iTunes store. As I recall, it asked for my password twice, and the security code from the back of my credit card. After that, downloads proceeded as before.
Fred -
When I try to view the tutorials in IDVD, I get the following message: "The vodeo cannot be found. It may have been removed from server HTTP 404" What do I do?
You don't say what version of iDVD you are using, nor what link you were using, but try these:
A good guide to iDVD 7 can be found here:
http://www.kenstone.net/fcp_homepage/idvd_07_stone.html
Apple's tutorial on iDVD 07/08 is here:
http://manuals.info.apple.com/en/idvd_08_getting_started.pdf -
How do I download Adobe Presenter when I keep getting error 413 - header too large?
Make sure you have cookies enabled and clear your cache. If it continues to fail try using a different browser.
-
I am currently using firefox 3.0.19 '''bold text'''
* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
I can not get Duplicate to work in Pages. The Message I get states" Unsaved pages Document,pages"couldn't be moved because you don't have permission to access :Autosave Information." I have gone to "get Info"and I have premission to read & write, I have run disk utility and repaired premissions. I have run AppleJack and still get these messages. How can I correct this problem?
Thanks for any help
AlanYour question seems to be the same than the one asked and answered in :
https://discussions.apple.com/thread/2252306?start=15&tstart=0
Yvan KOENIG (VALLAURIS, France) mercredi 24 août 2011 18:27:08
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
...how do I resolve this issue? It's irritating for several reasons:
1) My new songs do not appear in match on my other devices because of this error
2) My itunes turns itself on automatically when it knows it needs to match; then the icon starts jumping up and down when the error occurs, distracting me from whatever I'm doing about ever 15 minutes at times.
3) I've paid for this. It's working so badly.Found a potential solution here:
https://discussions.apple.com/thread/4332757
Gsleeroy
Re: error 4002 in itunes match do you have a solution?
Sep 23, 2012 10:08 AM (in response to matracaelcan)
Hi All,
I had this problem today myself, and was frustrated repeatedly by the '4002' error.
I have literally just fixed the issue by doing the following steps:
1: Go to the 'Store' tab and select 'Turn Off iTunes Match'
2: Return to the 'Store' tab and select 'Update Genius'
3: Wait for this to complete succesfully, the return to the 'Store' tab once more and select 'Turn On iTunes Match'.
4: iTunes Match will now go through the motions and should succeed!
I hope this helps -
Why won't my iPhone sync with my computer? When I hook the phone up to iTunes I get a message that reads: iTunes could not back up the iPhone because the backup could not be saved on the computer. This never happened before.
Hey Janice Lucoff,
Thanks for the question. It sounds like you are experiencing issues backing up your iPhone 4s in iTunes, which is causing issues finishing the sync of your device. The following resource should help resolve your issue, as it refers to the exact error message you described:
iOS: If you can't back up or restore from a backup in iTunes
http://support.apple.com/kb/TS2529
Thanks,
Matt M. -
When I try to update two certain apps in the App Store, I get a message that says 'cannot connect to iTunes store'. Any idea how to get these apps to update?
Check that the apps are still available in the store
-
When I try to install an app, I always get a message saying My password is invalid
What am I doing wrong?Try this:
Settings > Store
Tap on Apple ID
Sign out
Sign in with correct ID and Password
Try to download app again.
Maybe you are looking for
-
No sound through headphones/microphone ALC892
I've been trying for days to fix this issue, and am lost. I've got a new desktop and cannot get sound to come out my headphones, or take input from my microphone. I believe my sound card driver is installed correctly, and that it is a pulseaudio pr
-
Problems Scanning with Acrobat XI Pro for Mac
I am running Acrobat 11.0.10 on a Mac computer (Yosemite 10.10.2). Ever since i have updated Acrobat, when i attempt to scan documents with my Epson Photo RX620 it won't scan. When i try it without image correction, it tells me "an Error occurred wh
-
JMS using JBoss !!!
Hey, ich just have a problem realizing jms over the jboss server. Actually, if you want to implement a JMS-Producer or JMS-Consumer you need to define a �*-servie.xml� file which hast to be copied in the deployed directory of the server and it has to
-
ACR adjustments reflected in Bridge 5.1 thumbnails - how?
In Bridge 5.1, how do I get the thumbnails displayed from CR2 files to reflect adjustments made to them in ACR? I seem to recall this happened in earlier versions, but I have not figured out how to make it happen in 5.1. Any suggestions?
-
Finder crash when I control click on desktop or file - help please
Hi all, My finder crashes when I control click on desktop or any file in a folder/directory. Do I have a preferences file that went bad or something? I already ran FSCK. Thanks for the help. Mitch