TS1717 Error during installation on Windows 7 64 bit

Hello, please can you help me. I am trying to install iTunes on a 64-bit Windows 7 machine. I have found the correct download for 64 bit machines but am coming up against an error message when I'm in the middle of the install. It then rolls all the way back. The error message reads: An error occurred during the installation of assembly 'policy.8.0.Microsoft.VC80.CRT.type="win32-policy".version="8.0.50727.4053".pub licKeyToken="1fc8b3b9a1e18e3b".processorArchitecture="amd64"". Please refer to Help and Support for more information. HRESULT: 0x...
I have cleared temp files and there is no previous version of iTunes installed on this new laptop. How do I resolve this?
Thanks.

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

Similar Messages

How to fix error during installation of windows 7?

im trying to install windows 7 pro
the first steps of boot camp came simple and easy
partitioned and load installation disk but when i click on "install now", an error came up stating "windows could not retrieve information about the disks on this computer"
Plz help me fix the problem anybody!!!
Thank U
JOT

im trying to install windows 7 pro
the first steps of boot camp came simple and easy
partitioned and load installation disk but when i click on "install now", an error came up stating "windows could not retrieve information about the disks on this computer"
Plz help me fix the problem anybody!!!
Thank U
JOT

Emulators for windows mobile 10.0.10069 : the installer failed. fatal error during installation. error code: -2147023293

I am using win 10 home insider preview, build 10074. When I am trying to install VS 2015 community RC, selected Universal Windows App, it failed at
emulators for windows mobile 10.0.10069 : the installer failed. fatal error during installation. error code: -2147023293
VS file version is 14.0.5596.25192

Hello EL_1980,
The error -2147023293 translated to Hex is:FFFFFFFF80070643
0x80070643 is a general error here so it is hard for us to troubleshoot. Please try download the ISO format of Visual Studio 2015 Community so that you can use the fciv.exe tool to verify the hash value. All info are listed on the VS2015 download page:
https://www.visualstudio.com/en-us/downloads/visual-studio-2015-downloads-vs.aspx
Please click first "Visual Studio 2015" tap below image.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Microsoft Office Customiziatoin Installer : Error during installation, file:///c:/Program Files (x86)/Microsoft Visual Studio Excel 2013, Windows 7 64 bit

How do I get ride of the Microsoft Office Customization Installer Error during installation, Name: file:///c:/Program Files (x86)/Microsoft Visual Studio From: 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto
Downloading file: :///c:/Program Files (x86)/Microsoft Visual Studio 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto did not succeed
Details:
Name:
From: file:///c:/Program Files (x86)/Microsoft Visual Studio 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto
************** Exception Text **************
System.Deployment.Application.DeploymentDownloadException: Downloading file:///c:/Program Files (x86)/Microsoft Visual Studio 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto did not succeed. ---> System.Net.WebException:
Could not find file 'c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies\Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto'. ---> System.Net.WebException: Could not find file 'c:\Program Files (x86)\Microsoft Visual
Studio 10.0\Common7\IDE\PrivateAssemblies\Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto'. ---> System.IO.FileNotFoundException: Could not find file 'c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies\Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath,
Boolean checkHost)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean useAsync)
at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
--- End of inner exception stack trace ---
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
at System.Net.FileWebRequest.GetResponseCallback(Object state)
--- End of inner exception stack trace ---
at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.FileWebRequest.GetResponse()
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
--- End of inner exception stack trace ---
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.GetManifests(TimeSpan timeout)
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()

I discovered the cause of this problem. I had pointed my "My Documents" folder to a NAS drive that I had rather than my C drive. Apparently Photoshop was dependant on it being on the C dirve. When I repointed this back to my C drive CS5 installed properly.

TS5376 When I try to remove "Apple Mobile Device Support" I get a "Fatal error during installation" message. I have windows XP

The program will not start because MSVCR80.dll is missing. I am trying to unistall I tunes and then reinstall it because the latest upgrade did not work. I was able to remove "Itunes" and "apple Software update' but when I tried to remove "Apple mobile device support" I get a "fatal error during installation" message.

First try a repair install of Apple Mobile Device Support. If that goes through successfully, restart the PC and see if you can now uninstall Apple Mobile Device Support.
If the Repair install doesn't help, try using the fixit from the following Microsoft document to remove Apple Mobile Device Support:
Fix problems with programs that can't be installed or uninstalled

Adobe Illustrator CS3: Fatal error during installation

Hello,
I just bought the AI CS3. It installed OK on my friend's laptop (windows). However, when I clicked the big button in the installation:
"Install Adobe Illustrator CS3"
A window showed:
Initializing Adobe Illustrator...
Then I got a message:
"Setup has encountered an error and cannot continue. Contact Adobe customer Support for assistance. Fatal error during installation".
I've tried several times. My computer meets all the requirements (it's a really new and faster PC). And there's no old versions of AI on it yet.
Can anyone help? Thanks!!!

Do you have any other Adobe products on your computer? When I installed CS3 on my Mac, I kept getting failures. After contacting Adobe, they told me I had to delete ALL other Adobe products -- including Flash and Adobe Reader. Plus, I had to do searches and delete any support files associated with them. It took hours!

Itunes: Fatal Error During Installation (it wont download at all) HELP!

Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted the computer and when I tried to open up iTunes (after restarting), a little window came up saying:
+*Preparing to install...*+
Then after a minute or two it said: *+Please wait while Windows configures iTunes+*
Then another window pops up saying:
*+Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. +*
*+Verify that you have access to that directory.+*
and I have no idea what that means so i closed it then a pop up shows saying: *+Fatal Error During Installation.+*
so i deleted iTunes, Quicktime, iPod and everything i could (that my computer would let me) that had to do with Apple and restarted my computer then tried to download iTunes again but now when its reisntalling it says
*+Error writing to file:+* +*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
+*Verify that you have access to that directory.*+
Then after this i went to the folder
+*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
and made sure that Read Only wasn't checked but everytime i go to uncheck it and click Apply and OK it doesnt stay it just goes right back to being checked...because when u click OK the window goes away so i immediately opened it back up to see if changed but it was filled again
WHAT DO I DO?!?!? please can someone help me
The details for my computer are:
Microsoft Windows XP
Professional Version 2002
Service Pack 2

if it helps at all...
I downloaded Quicktime seperately from iTunes and i got that with no problem and it worked just fine but i cant get iTunes at all
and i have follwed the instructions on the website about uninstalling everything but nothing seems to be working
...is there any possible way that anybody can help me out with this.
any help that anyone can offer is very greatly appreciated,
Please & Thank You.

Fatal error during installation

I have been attempting to update my version of Boot Camp from 2.1 to 2.2. I have tried on numerous occasions with Apple Software Update but it never installs when the computer restarts. I have Vista 32bit installed on the partition. I tried to update with my Snow Leopard disk to 3.0 but it says the installer encountered errors before Boot Camp could be configured. It also does this with my Leopard disk. As a last resort I tried to repair the Boot Camp Services from the Windows Vista control panel and I get Fatal Error During Installation. Any ideas?
Thanks,
tuvixcrc

Hi,
Since you only give one of error log and the Error 0x80070643 code is a common error, we need more information to diagnose the problem. Before you collect the logs, you should follow up these steps to install Visual Studio:
1. Re-download the Visual studio from Microsoft official site here:
http://www.visualstudio.com/downloads/download-visual-studio-vs
After download you should use File Checksum Integrity Verifier tool to verify the integrity of your download. If the values don't match, your download may be corrupted and you should download the file again:
Refer to the below page to know checksum detailed number:
http://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs.aspx#
Refer to
Download the Microsoft File Checksum Integrity Verifier to know how to check the checksum hash value.
2. Disable your Anti-Virus or Anti-Spyware software and be sure that your OS has been "patched" up - Update your computer (Windows) before install the VS.
3. Clean your %temp% folder and run the installer with Administrator permission.
Look the links to get more information:
http://blogs.msdn.com/b/msdnforum/archive/2010/03/06/visual-studio-and-net-framework-installation-tips.aspx
https://social.msdn.microsoft.com/Forums/vstudio/en-US/60f71a54-506e-4c70-be98-e993ce6d1ddf/visual-studio-installation-tips?forum=vssetup
If that still cannot go on the VS installation, please use
http://aka.ms/vscollect to gather the latest installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://Onedrive.live.com/ and share the link here.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Apples update didn't work for me: Boot Camp: iMac displays a black screen during installation of Windows 7

Boot Camp: iMac displays a black screen during installation of Windows 7 - Apple Support
I have followed each of the steps listed in the link above with no success.
Prior to adding the extra drivers I was able to start the Windows install process up to reformatting the "Windows" Bootcamp drive. After that the computer would go through some instal processes and eventually restart. After the restart the screen would go black. The black screen lead me to the Apple Support link above dated March 5 2015. After going through steps listed in the link above, I get an error message stating that the D:\Sources\instal.win. file cannot be located. I am forced to restart the computer at that point and theWindows install process attempts to start again but always ends up at the same point.
Note: I am installing windows 7 Pro from a DVD. I scanned the AutoUnattend.xml file and noticed that it refers to "Windows 7 ULTIMATE" but not "Pro" or any others that I could see. (see below). Could that be part of the issue?
Any feedback would be greatly appreciated.
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
iMac (27-inch, Late 2009)
2.66 GHz Intel Core i5
16 GB 1067 MHz DDR3
ATI Radeon HD 4850 512 MB

Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

Error during installation of SAPNW ABAP 701SR1 SP3 trial version in phase 2

Hi,
I am trying to install SAPNW ABAP 701 SP3 trial version.I am getting error in phase 2
Running msiexec failed with return code 1603: Fatal error during installation.
I am installing on window vista.I have also checked the security setting for the user I am trying to install.It is adminstrator and have access for full control.
When I started the installation of sap it asked me for master password and that password is different from what I use to log on to windows.Could this be the reason for this problem or something else ?
Any help appreciated.
Thanks,
Rekha.

Install SAP MMC snap first and continue with old installation.... it will pass 2nd phase
thank you
Mohan

Fatal error during installation - Error 1603 ONLY on XP

My Dears,
while installing any CS3 or CS4 Adobe product for my friend, at ~90% of installation error comes up:
"Adobe Photoshop CS4
Error:
Error 1603. Fatal error during installation."
I am struggling to solve it for 3 days now, and of corse I have seen and tryied all things proposed in posts like this: http://forums.adobe.com/thread/373577 , but still nothing helps me.
Thats list of all things that I have tryied to do:
- CleanUp fix
- Uninstalling all Adobe before fix
- Turning Internet off fix
- Turning anti-vir things off fix
- Registery fix
- Starting from CLEAN new system fix
- Changing language from US to International fix
Still nothing. Probably thats the point of problem:
Current Situation:
Got ACER ASPIRE x3200 desktop width Windows Vista (preinstalled), did clean installation of Windows XP and dumped Vista
There is no official drivers for XP, but got cracked chipset driver and official nVidia 8200 driver for XP from Internet
Got all Service Packs
100% legal
If nothing is working, maybe thats becaouse of my PC?! Installed it on my laptop with Vista 32b - WORKS (it means that installation CD is not corruptet or something). But then I have tryied to install it on another laptop with XP PRO - fail as with my PC. It seems that Windows XP Pro is not good for CS3 or CS4, BUT it did months before in my old unbranded PC.
Help! I really want to install that stuff.
Best Regards,
Westmidlander

I was only speaking very generally... This is all common sense...
Adobe and other software makers are moving on from XP in their development. Thus XP becomes more and more troublesome to use as the likelihood of problems increases.
In the case of installation, a lot of very specific things are required of an installer so that it can work on Windows 7. The User Account Control (UAC) system and other security measures such as file permissions have to be completely and properly satisfied to install software on the newer systems. Indeed, the application itself even has to work differently to be compliant - reference the recent 12.0.2 issues with loading scanner drivers for example, or the fact that Photoshop needs to put some things under C:\Users\... now that always used to be put under C:\Program Files\Adobe\...
It's not hard to imagine that Adobe isn't testing software as thoroughly on XP as they once did either. Perhaps they missed one of the quirks of XP in pursuit of getting it to install properly on Windows 7.
You're putting a new cutting edge software application on an operating system designed nearly 10 years ago (an epoch in high tech). That you don't see even more problems is a testament to Adobe's committment to support XP.
-Noel

"problem with shortcut/fatal error during installation" on other user accts

I-tunes installed and works with no problem in original user, but when another user account attempts to open Itunes, program attempts to install/configure again, then results in a "problem with shortcut / fatal error during installation" message. Setting the other users to administrators doesn't help, nor does un-installing/re-installing, etc. I am at least the 4th person with this problem (see Burthomp earlier today,Jan. 17 and Richard 1018 on Dec. 29). This problem started with Itunes 7.5, and is still a problem on Itunes 7.6. I have a standard Dell setup, Model E510. There must be a lot of people with this problem. Apple, are you working on this? Anyone else have a suggestion?

I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.

Visual C++ Fatal error during installation

When I was installing Titanfall on Origin I got a 1603 error. I looked at some forum posts on fixes.
I have uninstalled all of my VC++ from my computer and when i tried to download and install fresh copies every single one results in a fatal error durring installation.
OS Version = 5.1.2600, Platform 2, Service Pack 2
OS Description = WinXP - x64 Professional Service Pack 2
CommandLine = c:\9606a8ce2f11654507209809fa5c4d\Setup.exe
TimeZone = Mountain Standard Time
Initial LCID = 1033
Using Simultaneous Download and Install mechanism
Operation: Installing
Package Name = Microsoft Visual C++ 2010 x64 Redistributable Setup
Package Version = 10.0.30319
User Experience Data Collection Policy: UserControlled
Number of applicable items: 3
Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation. " (Elapsed time: 0 00:00:13).

The error log is incorrect. I am using Windows 7 Pro.
I was able to install MS VC++ 2013 redist.(x64) and VC++ 2005 (x64) just fine but I cannot install 2010.
Eh? Never saw an install log where Win 7 was identified as Win XP x64.
What, exactly, are you trying to install? Are you installing Visual Studio, or C++ redistributables?
Please show the link to what you are trying to install, and provide your install logs as follows:
Please collect your install logs with this:
http://aka.ms/vscollect
After you run Collect.exe, you'll find vslogs.cab in your %temp% directory. Please upload vslogs.cab to a public site, like OneDrive, and post the link here.

Itunes 7.6 installation Fatal Error during installation

I successfully installed Itunes into my account - as the administrator. However, my other computer users users can't install the new version. The get a window that pops up: Problem with shortcut, fatal error during installation. I have tried removing and re-installing, I even followed all the steps in the trouble article #93976. I also deleted the user, created a new on, made that user an adminstrator and still can't install. HELP!

I found on another post that concerns this same topic that someone has responded with the following solution:
I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.
I have not tried it yet, but when I have the time to sit and actually do it, and if it works, I will definitely let you guys know!

Itunes: Fatal Error During Installation

Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted and when I tried to open up iTunes(after restarting), a little window came up saying:
+Preparing to install...+
Then after a minute or two it said: +Please wait while Windows configures iTunes+
Then another window pops up saying:
+*Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. *+
+*Verify that you have access to that directory.*+
and I have no idea what that means so i closed it then a pop up shows saying: +Fatal Error During Installation.+
WHAT DO I DO?!?!? please help me
The details for my computer are:
Microsoft Windows XP
Professional Version 2002
Service Pack 2

Try first going through this article to remove iTunes and Quicktime completely (http://docs.info.apple.com/article.html?artnum=93698).
After you remove everything, don't re-install yet. Download the Windows Installer Cleanup Utility (http://support.microsoft.com/kb/290301). After insalling that, remove any references of iTunes, Apple, or Quicktime in the list.
Try re-installing now.

TS1717 Error during installation on Windows 7 64 bit

Similar Messages

Maybe you are looking for