TS1717 Itunes Error -42404 After Cleaning Computer

I recently cleaned by computer using CCleaner. Now, I am getting an error message saying I need to reinstall itunes. However, I can bring up my itunes, so I know it hasn't been erased. Also, my computer is not recognizing my ipod nano. Will reinstalling itunes solve these problems? Will any of my data be most?
It said "the software required for communicating with ipods and mobile phones was not installed correctly. Do you want itunes to try to repair this for you?" I said "Yes"
"The software required for communicating with ipods and mobile phones could not be repaired. Please reinstall itunes if you wish to use these devices."
Then, "A required itunes componet is not installed please repair or reinstall itunes" -42404

Hmmm.
Let's try something relatively simple. Download and save a copy of the installer to your hard drive (don't run the install on line and don't start the install just yet):
http://www.apple.com/itunes/download/
Now right-click on the iTunesSetup.exe (or iTunes64Setup.exe) that you downloaded and select "Run as administrator".
Does that go through any better for you?

Similar Messages

  • ITunes Error 42404 after update

    I have updated to 11.0.3.42 and now have an error 42404 come up, I have uninstalled itunes twice and reinstalled but still get the same message. What am i doing wrong ang how can I fix it?

    Hi IPuppy84,
    If you continue to the the Error 42404 message even after attempting to reinstall iTunes, you may want to check out the "Specific Conditions and Alert Messages" section of the following article:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Regards,
    - Brenden

  • TS3694 itunes error (-42404) -- Okay, getting a little frustrated (but then again, who isn't a little frustrated?). I recently tried to upgrade iTunes software a few days ago but it failed. What is (-42404) error code mean?

    itunes error (-42404) -- Okay, getting a little frustrated (but then again, who isn't a little frustrated?). I recently tried to upgrade iTunes software a few days ago but it failed. What is (-42404) error code mean?
    I get the following:
      (1) iTunes - The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? Yes/No
      (2) iTunes - The software required for communicating with iPods and mobile phones could not be repaired. Please reinstall iTunes if you wish to use these devices. OK
      (3) iTunes error message - A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404) OK
      (4) iTunes error message - We could not complete your iTunes Store request. A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404) There is an error in the iTunes Store. Please try again later. OK
    Okay, so I decided to uninstall and reinstall. Funny, iTunes can be found in a program folder, but it does not show up in the programs list. I tried to look for it using the command prompt ("wmic" --> "product get name") but iTunes is not there either. Doesn't even show up in the registry to try to uninstall.
    I just want to "properly" uninstall and reinstall iTunes (plus the other usual suspects, Apple Software Update, Apple Mobile Device Support, Bonjour, & Apple Application Support). If anyone out there has any suggestions, please help! (I'm running Windows Vista -- don't judge/laugh) :-)

    Okay, feeling like an idiot, but will share so others don't have to. I rebooted my computer and that enabled iTunes to reappear in the programs list. Don't appear to be having the same problems as before (no error messages now). Problem solved!

  • I downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm

    i downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm and fyi  i try all the ways to turn it on but it didnt sucsses

    roaminggnome 
      thanks for helping but i didnt know that is the downgrade is forbidden  and i ask for help and u didnt help me so i just want to thank u for telling me that is the downgrade is forbidden >>> but now i didnt have i phone any more so thank u so much again >>>> 

  • Errors processing after adding Computed Column to Time.

    Errors in the high-level relational engine. The 'Time' table is based on a named query, and contains one or more computed columns. A table based on a named query cannot contain computed columns. If the computed columns are necessary, add them to the query
    expression.
    Help me, pls! Thanks!

    Hi CUONGNV0207,
    According to your description, you get this error when processing cube. Right?
    As the error message mentioned, a table based on a named query cannot contain computed columns. If you create a computed column in this table, it will throw this error. In this scenario, please go to the DSV and check if that table is set up with named query.
    You can replace it with a DimTable in your database.
    Reference:
    cryptic error when processing cube
    Errors processing after adding Computed
    Column to Time
    If you have any question, please feel free to ask.
    Simon Hou
    TechNet Community Support

  • I tunes error -42404 after installing update

    Problem with itunes after update. Windows 7, 64 bit. Have uninstalled, deleted all apple files/folders etc. per other forums (several times with different error msgs). Finally got it to install-had to install Qiicktime separately but am getting following error msg and progrram doesn't work correctly and shuts down.
    error msg "A required iTunes component is not installed.Please repair or reinstall iTunes (-42404). Any help would be appreciated.

    Hello spiketaz,
    iTunes has various components bundled with it that it requires for general usage. I advise that we completely remove iTunes and all of these related components, verify that they have been removed, then reinstall. To do so, please follow the steps in this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Note: it is important to remove the 7 components in order. Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    If the above does not resolve your issue, I recommend we reset the SC Info folder:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    (See Step 4: Remove the SC Info folder)
    Thanks,
    Matt M.

  • Itunes Error 42404- corepf.pkg install fail

    The Corepf.pkg in the itunes installer is failing to install, causing me to not be able to authorize my itunes account and preventing me from installing apps on my iphone and playing downloaded music. The pkg gets about 80% of the way through the install process. The error message states "The installer could not install some files in "/." I've tried reinstalling itunes and fixing disk permissions to no avail. Any thoughts?

    I have exactly the same problem. I had a support store reinstall all my software after my computer crashed. I now have iTunes 8.2.1 and Quicktime 7.6.2 which as far as I can tell are the most current available. But when I try to play EITHER my own purchased downloaded music OR samples from the store, I get the message "We could not complete your iTunes store request. A required iTunes component is not installed (-42404). There was an error in the iTunes store. Please try again later." I've been trying again later for 2 days but no luck. I repaired all permissions, re-installed Quicktime, and tried every other hint I could find online. Help!

  • How do I solve the following Itunes error -42404 I have tried uninstalling as well as repair and re installing, I keep getting the same problem, Help please

    Please help I am un able to get my I Tunes back on my Windows 7 -64 after a Virus clean out, How can I solve a problem with the followin ITunes error of -42404 I have tried the usual uninstall and reinstal, as well as the  repair all at no success, do any of you have any solution Ideas that have solved this in the past? Please Help, Thank you...

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • Itunes error -42404

    Well, unlike a previous thread about this error code, my itunes will open and play song and music videos. The catch is that it will only play songs and videos that i purchased in the last 4 months or so. All movies and 90% of the songs after that will not play. Movies wont play period while songs pop up the authorize box and when i go to authorize it pops up the "Unable to authorize. iTunes is missing a required component Error -42404"
    Now i recently had to archive and reinstall OSX 10.4 because a failed update corrupted many of my programs. Now everything else works fully except iTunes. And i have current itunes and quicktime.
    What do i do now??
    Message was edited by: Silentwolf

    Hi,
    Try downloading and reinstalling the latest version of iTunes from here: http://www.apple.com/itunes/download/
    Can you download anything from the iTunes Store, like the Free Single of The Week?
    If you can't download from or connect to the iTunes Store, try the general tips in this article: http://support.apple.com/kb/TS1368
    -Jason

  • Error 42404 after 10.5.3.3 upgrade

    Has anyone got a fix for this or is it a software issue on iTunes part.  I have windows 7 64 bit and until yesterday when i did the upgrade i had no problems.  I have tried repair and uninstall and reinstall which i have done and i still get the message  " A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)" it would suggest that there is something missing with the install of iTunes as iTunes worked fine up until i did the upgrade yesterday.  I have noticed a number of similiar issues here and on Google so many many people have this same problem after upgrading to 10.5.3.3

    OMG!! I have fixed it ok guys here is the answer for all Windows 7 pplz upgrading to 10.5.3.3 who have the following errors:
    Error 7 Windows Error 5
    ItunesHelper didnt install
    Itunes didnt install
    mobilehelper didnt install
    error -42404
    Here is the fix:
    Firstly thank you to Chris, Senior Advisor at Apple he doesnt know it yet but he set me to thinking and i can now say i have solved it. Before you start make sure you have completed the unistall sequence elsewhere on the forum.
    Firstly go to the c:\program files (x86) then go to Common Files now here is the trick guys you may think you have got all of C drive to show all hidden files but you may not have so click Organise, Folder Seach options and Click and click View then ensure the Show all files is selected. Now you may notice you have an Apple folder which may not have been there when you did the uninstall of the sequence listed elsewhere on this board. 
    What the main issue here is if you installed iTunes but did not right click and choose install as an administrator then you will not be able to delete this folder I dont know if this is a Windows or Apple or both and why certain areas still don't show all files when you have this in C: i don't know either. 
    What you need to do is right click then choose properties then go to Security then to advanced then to Owner if it says Unknown in the box you need to click edit then choose an administrator listed then click ok, ok on the next box and ok all the way back.  Now double click on the folder and click ok to the next box and you are in and you can go back and delete this folder.  Now the bad news is you have to do this to every single folder in everything in the apple folder.  This is painful but you may know of software or a trick in windows that will reset every permission in every folder under apple but i did every single one myself.  Then download fresh iTunes and Quicktime.  Right Click Quicktime and run as administrator do the same with iTunes 10.5.3.3 and your done mine is now back up and running woohoooo. Side note i did empty the recycle bin and reboot before i did the reinstall.
    Cheers all

  • ITunes Error 42408 After 9.03 Upgrade

    I am receiving the error 42408 after upgrading to 9.03. Google did not yield any results. The error appears attempting to authorize my Powerbook.

    I had the same problem. Check the version of iTunes via the About dialog. Mine said 9.0.2 despite having upgraded via system updates, itunes and even downloading the whole package again.
    Turns out, the dock iTunes link is running the old one. Basically, remove it from the dock, and re-drag the itunes from the applications folder back onto the dock. This then started 9.0.3 for me, and my iTunes account worked, the itunes store worked and iphone sync worked as well. Phew.
    Check the bottom of this page for my reference http://support.apple.com/kb/HT2311

  • TS1424 itunes error -54 after software update

    Hello after todays update of itunes  - I now have Itunes error -54 library file cannot be saved. Does anyone have a solution.
    Thanks

    Hey Michael,
    I found the following tip from another user that seems to be a similar error. I'd give the steps they provide a shot and see if that resolves the issue:
    iTunes library file cannot be saved error -50
    https://discussions.apple.com/thread/2608679
    Best,
    Delgadoh

  • When will Apple fix the itunes error that insists the computer is not authorized when it is.

    I know lots of people post solution to this, usually trashing the device and starting with a fresh AID but that is not an acceptable solution.
    APPLE if you are listening, we do not want to have to start from scratch after updating itunes!
    I guess the problem might be linked to the fact that 4 different members of the family use itunes for their device but I am sure this is not unusual.
    It is unacceptable for the software to screw up like this, it seems to completely lose track of which ID is used for which device and now will not sync, saying
    And when I go through authorization again

    These are user-to-user forums, you are not talking to iTunes Support nor Apple. If you think that there is a bug then use the feedback page to report it to Apple : http://www.apple.com/feedback/itunesapp.html
    The account that was used to purchase 'CBi' is authorised, as is any other account that has content in that iTunes library and/or on the devices that are synced to it ?
    If you being repeatedly asked to authorise an account : iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

  • TS3258 error 42404 after installing iTunes 10.6

    I'm getting the above error after installation.  Now itunes won't recognize my ipod.  What do I do?

    After installing itunes 10.6, system does not connect to itunes, it kepps on saying "Accessing itunes store".
    I'd start with the following document with that one:
    Apple software on Windows: May see performance issues and blank iTunes Store

  • TS1717 iTunes not starting after power fail and reinstall

    I'm using a Samsung NP700 series laptop, with a dodgy battery, running Windows 7.
    I was doing some work when the power failed and my battery failed soon after. When power was restored the system ran CHDISK during boot up and found several problems. I then started getting Win32 exceptions from CFNetwork.dll during start up and whenever I tried to start iTunes.
    I followed the advice in the support pages and ended up doing a complete clean and reinstall. After this the exception had gone but iTunes failed to start. I got nothing, double click the icon nothing, open iTunes from the start menu, nothing. No reports, no errors it just failed to do anything.
    I had installed the 64 bit version but it wanted to install in 'program files (X86)'. Was this the problem?
    In desperation I ran iTunes using 'Troubleshoot Compatibility' that suggested XP SP2 mode and it worked. iTunes complained about being in compatibility but it ran.
    Switching off compatibility mode reverts back to iTunes not bothering to start.
    Oddly enough iTunes remembers that I was using an external drive for my library, I had expected to have to set that up again after the clean uninstall.
    Still I am working, iTunes is not happy but I am working. In the next few days I hope to upgrade to Windows 8 - only God knows what problems that will cause.

    Okay, things have gone from bad to worse. I checked the event log again after another failure to start and found that iTunes hadn't started because of an exception thrown by AUDIOSES.DLL. Sfc failed to fix it so I tried a restore to an earlier date.
    That's when things went badly wrong. After the restore my system refused to boot. Even the recovery disk failed. Fortunately I was preparing to upgrade my system to Windows 8 and already had the upgrade disk.
    One clean upgrade to Windows 8 later and my computer is working again. All I have to do is install all my software again. This is not a big problem as I like to do this every so often to clear out the junk. Haven't got around to iTunes yet (still doing BIOS, drivers and firewall etc first). Hopefully I will be all back to normal in a couple of days. Good job that I am retired.

Maybe you are looking for

  • Error in invoking target 'install' after extproc32 in x86_64 installation

    Hi I am trying to install patch p4547809 (9.2.0.8) however when it gets to 99% of the installation I get this error: Error in invoking target 'install' of makefile '/u01/oracle/9ir2db/rdbms/lib/ins_rdbms.mk' According to the log file the error is as

  • Can no longer opt boot to Windows; Parallels and Boot Camp issues

    So I was reinstalling my Parallels since it wasn't reading my Boot Camp partition correctly and I removed my old boot camp profile in Parallels. I figured this would only affect Parallels. After all, I was going to make a new one since my Parallels w

  • How to populate the field VTTK - EXTI1 in the shipment

    Hi there, I have a situation where I need to populate the field VTTK - EXTI1  with certain values, I would like to know if there is a user exit or badi to do this.  Actually the field is empty and it's possible to enter any value. Thanks in advance R

  • Thai language support on Safari 3 beta

    I just try Safari 3 beta for Windows. Its speed is impressed so far but big problem with Thai language. - Thai word break is OK. - Thai Tonal Marks and Vowels which display on the top of normal Thai character are still incorrect. They float improperl

  • SSIS Package hangs

    Hi I have a package , with 2 dataflow task, 1st dataflow task gets the data from source table and loads into the temp table , and i have an executable sql task with updates some columns with some logic ... 2nd dataflow task gets the diff data from te