TS1717 Itunes fails to start due to "missing" MSVCR80.dll file.

Looking for help with a "missing" dll file error, which occurs at Itunes startup.
Have tried installing a Windows servicepack upgrade (suggested by someone) but if didn't seem to fix it.
Ideas ??

Hi marlinalvis!
Here is an article that will help you address this issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for using the Apple Support Communities!
Cheers,
Braden

Similar Messages

  • Install of iTunes on PC fails due to missing MSVCR80.dll file?

    The missing .dll file is in iTunes.exe.

    Solving MSVCR80 issue and Windows iTunes install issues.
    Thanks to user turingtest2 for this solution.
    Solving MSVCR80 issue and Windows iTunes install issues.
    If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    You may be required to boot into safe mode to complete the folder deletion process.

  • Airport for Windows doesn't start due to missing dnssd.dll?

    I've just installed AirPort for Windows v5.4.2 on my Windows XP SP3 laptop, yet it doesn't start due to a supposedly missing dnssd.dll file.
    The error message states: "This application has failed to start because dnssd.dll was not found. Re-installing the application may fix this problem" .
    Re-installing does not fix this. Any ideas?

    That's interesting. It's actually a BonJour dll, and it lives at:
    C:\WINDOWS\system32\dnssd.dll
    I can replicate your error message by dragging the dll out of system32 and on to the desktop prior to trying to launch the Airport utility.
    If it has gone walkabout for you in a similar fashion, here's a way of getting it back.
    Restart the PC. Now head into your Add or Remove Programs Control Panel. Select BonJour, click "Change" and then click "Repair".
    Does the repair install of BonJour go through properly? If so, can you open the Airport utility without the error message?

  • I get an error message..failed to load...missing msvcr80.dll

    Itunes showed me that an newer version of Itunes was available. after downloading  i get an error message "This application has failed to start because MSVR80.dll was not found..Re-installing the application may fix this problem.  I then uninstalled Itunes and reinstalled and get  another error mess that itunes was not installed correctly "error 7(windows error 126)"
    I ran an sfc/scannow which i am shown that "  resource protection found corrupt files and was unable to fix some of them"
    How do i get the missing msvcr80.dll. 

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • ITunes wont open because I'm missing msvcr80.dll? It said to remove iTunes and install again but it wont work, HELP?

    I just want my iTunes back I think I accidentally deleted msvcr80.dll? What should I do?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • ITunes Installer Interrupted, missing MSVCR80.dll files

    Hi, I hope someone can help me.
    I was downloading iTunes and got the error message that iTunes couldn't download because the MSVCR80.dll files were missingand so iTunes could not install.
    After trying to download repeatedly and repair I finally uninstalled iTunes and tried to re-install it.
    The message I got was:
    iTunes Installer Interrupted
    Errors occured during installation before the requested operations for iTunes could be completed.
    Your system has not been modified. To complete the installation, run the installer again
    Click finish to exit the installer
    Help please!

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • TS1717 Running Vista on old HP computer.  New version of iTunes was available to download so I did.  Now iTunes won't start and says it is missing MSVCR80.dll file.  Any helpful information on how to fix this will be appreciated.  Have uninstalled and ins

    Got advised that a new version of iTunes was available for my HP PC running Vista.  Upon downloading, wouldn't launch.  Uninstalled and reinstalled.  Wouldn't launch.  Both error messages said that a file named MSVCR80.dll was missing.  Any help in correcting this problem would be greatly appreciated.  Thanks.

    I also posted this question and then Googled it.  The instruction was to delete, in order iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, Apple Application Support and iCloud.   Uninstall worked for all but apple Mobile Dvice Support and i Cloud.  However, when I reloaded iTunes, it worked fine.  I hope this is helpful. RobinVista

  • I did the recommended re-install to resolve the missing MSVCR80.dll file. This worked, but I am now stymied by two error messages: "Apple Mobile Device failed to start" and "Apple application support not found". How to overcome?

    That worked, however I now get two error messages when I install I Tunes:
    o  Apple Mobile Device failed to start.
    o  Apple Application Support not found.
    This were of course deleted in the recommended re-install procedure to resolve the dll file, but repeated uninstalls and installs simply bring up these two error messages with a recommendation to install I Tune again. Installing the new I Tunes version seems to be problematic per the discussion groups and has no simple solution. SHould not the Genius bar be able to resolve this at an Apple Store? Want to buy a new I Phone 5S, but this problem effectively stymies this.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I can't run itunes or install updates now due to teh MSVCR80.dll file not found and APS Daemon.exe being nable to locate a component ofn Windows vists.  A MS user suggested uninstalling all Apple programs.  I did this but could not uninstall the Apple Mob

    I have been getting error messages  .n MS windows the APS Daemon ,exe is unable to locate a component and the itunes updates and program failed to start because MSVCR80,dll was not found.  As advised I have uninstalled all Apple Inc. programs except the Apple Mobile Device program.  Then I reinstalled itunes but still get the errors and can't run itunes.  Advice....

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Itunes won't work because of missing "MSVCR80.dll" ?

    I am unable to start up itunes on my pc.  It gives the above error when I try.  I have tried three times to re-install directly from apple.com and have tried the update.  Nothing has been succesful and every time I receive the same error.  Any suggestions?

    http://docs.info.apple.com/article.html?artnum=304424

  • Missing MSVCR80.dll file after installing the latest itunes update

    Does anyone know if Apple has posted a new download yet to rectify the problem of the missing MSVCR80dll file problem, caused by the last iTunes update? If not, what is the answer? I've tried repairing and unistalling and re-installing itunes and the old version of itunes and nothing seems to fix the problem. I don't feel inclined to spend loads of time trying to sort a problem caused a supposedly safe download, in fact should we not download the latest versions until they have had time to filter out problems like this?

    1. No.
    2. Click here and follow the instructions.
    (99026)

  • Itunes won't start - says "missing msvcr80.dll"

    itunes won't start.  says "missing msvcr80.dll"

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • TS1717 Itunes want start because it is missing MSCVCR80.DLL file.

    Itunes want start because it is missing MSVCR80.dll file.

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
    iTunes 11.1.4 for Windows- Tips for Unable to install or open - MSVCR80

  • TS1717 missing MSVCR80.dll after iTunes update and reinstall

    Running Windows 8 and did latest update for iTunes and now it wont run, tried reinstall numerous times, same result.  Missing MSVCR80.DLL file.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99263)

  • HT1349 My computer popped up with an update from iTunes several days ago. I downloaded the update and when I went to open iTunes, it won't open. I've tried to download again from the website, but it still gives me this error message.  Missing MSVCR80.dll

    My computer popped up with an update from iTunes several days ago. I downloaded the update. When I went to open iTunes on my computer, it gives me the following error messages...
    Missing MSVCR80.dll file.
    Error 7 (Windows error 126)
    I tried to download iTunes again from the website and repair the problem, to no avail.  I've tried several times, but cannot get it to open. I have a Windows 7 machine.  My iPhone 5 and iPad work fine and have not asked me to update. I've never had a problem with iTunes before.  I hate to delete it entirely from my computer and start over.  I'm afraid I'll lose all the music I have downloaded there. What do I do?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

Maybe you are looking for

  • Upload XML file from server to itab

    After failed to get a answer about download data from xml file in server to my itab, and searching and searching in hundred of post and threads i try my own solution for this issue. I read the file with: OPEN DATASET FICHERO FOR INPUT IN TEXT MODE EN

  • Big Library:Slow Performance?

    I have about 10,000 photos (.jpg ~3MB each) in my Aperture Library. I want to add many more photos but I'm worried about slow performance. My questions: 1. How big is your library or how big do you think the libraries can get? 2. Have you noticed slo

  • Highlight

    The text in the pdf file is searchable but the highlight tool is not active and will not work. How does somebody get it to work?

  • Creating Web Service (version2)

    Hi I am new to SAP. I have created a web service using the Web Service Creation Wizard. I noticed that when I view the web service using WSADMIN, there are 2 web services, one with the original name and the other suffixed with /version2. Does anyone

  • Single SOA Suite Install with multiple oc4j instances and java processes

    We right now have 5 BPEL processes and 5 ESB processes all running under one java.exe process. We would like to seperate some of them out into their own java.exe processes without having to install more %ORACLE_HOME% instances of SOA Suite. I can cre