TS1717 Please help download issue windows 7

please help! I installed the new version of itunes and now when i try to run it, i get a message that says, "this version is corrupted or not installed properly." i'm afraid to uninstall and lose all my music.

Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now?

Similar Messages

I have windows 64 and trying to download itunes 10.5, it start downloading but then after it`s almos finish i have a window pup up with error Microsoft ft VC80.CRT,type="win32" etc.Please help.I have windows 7 64

I have windows 64 and trying to download itunes 10.5, it start downloading but then after it`s almos finish i have a window pup up with error Microsoft ft VC80.CRT,type="win32" etc.Please help.I have windows 7 64

same here.

HT3986 I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 pro

I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem

i try to download now, do you think when i download and install the windows support software, can i fix the problem?

Please help with minidump - Windows 7 64 bit

Hi,
I recently reinstalled Windows 7 and since reinstalling, I've been having a problem with BSODs when running Freemake Video Converter which was working flawlessly before the reinstallation. No hardware changes have been made, nor any BIOS changes.
I was getting various different BSOD messages and they seemed to point to Kaspersky 2013 so I uninstalled that, ran Kaspersky's uninstallation tool but still kept getting BSODs when running Freemake.
So I formatted and reinstalled Windows 7 64bit again and installed MSE instead of Kaspersky.
I am still getting BSODs using Freemake though and it looks like a driver problem but that's as far as I can guess!
My system consists of an Intel 2600k, 16GB RAM, Ati HD5450 VGA, 250GB Samsung 840 Pro SSD, Asrock Z68Extreme7 motherboard, various SATA storage drives, Pioneer DB-206K Blu-ray writer.
Could someone please help? I have installed Windows Debug and here is my latest minidump:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\030414-9313-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: srv*c:\windows\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0xfffff800`02a4c000 PsLoadedModuleList = 0xfffff800`02c91e90
Debug session time: Tue Mar 4 02:26:40.038 2014 (UTC + 0:00)
System Uptime: 0 days 0:09:52.787
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80002ae88a4, fffff880072ffd00, 0}
Probably caused by : Unknown_Image ( nt!KeReleaseSemaphore+1e4 )
Followup: MachineOwner
1: kd> !analyze -v
*                        Bugcheck Analysis
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80002ae88a4, Address of the instruction which caused the bugcheck
Arg3: fffff880072ffd00, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!KeReleaseSemaphore+1e4
fffff800`02ae88a4 0fb6462b        movzx   eax,byte ptr [rsi+2Bh]
CONTEXT: fffff880072ffd00 -- (.cxr 0xfffff880072ffd00)
rax=0000000000000037 rbx=fffffa8010760580 rcx=fffffa8010760620
rdx=0000000000000000 rsi=0a1001c9ea0fd64d rdi=0000000000000000
rip=fffff80002ae88a4 rsp=fffff880073006e0 rbp=fffffa8010760688
r8=0000000000000000 r9=0000000000000000 r10=0000000000000000
r11=fffff8a00a3e3130 r12=0000000000000001 r13=fffff880009ec180
r14=fffff880009b3101 r15=fffffa8010760948
iopl=0         nv up ei pl nz na po cy
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b             efl=00010207
nt!KeReleaseSemaphore+0x1e4:
fffff800`02ae88a4 0fb6462b        movzx   eax,byte ptr [rsi+2Bh] ds:002b:0a1001c9`ea0fd678=??
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: FreemakeVC.exe
CURRENT_IRQL: 2
LAST_CONTROL_TRANSFER: from fffff80002dd7d60 to fffff80002ae88a4
STACK_TEXT:
fffff880`073006e0 fffff800`02dd7d60 : fffffa80`00000000 fffff8a0`00000001 00000000`00000000 fffff8a0`0a3e3000 : nt!KeReleaseSemaphore+0x1e4
fffff880`07300760 fffff800`02dd954e : 00000000`00000000 00000000`00000000 03030303`00000000 00000000`00000000 : nt!AlpcpCompleteDispatchMessage+0xa10
fffff880`073007f0 fffff800`02dd6e4f : 00000000`00010002 fffff8a0`024ae648 00000000`00000000 00000000`00000000 : nt!AlpcpDispatchNewMessage+0x24e
fffff880`07300850 fffff800`02da1d53 : 00000000`00000030 00000000`00000000 00000000`00000000 fffffa80`0f137900 : nt!AlpcpSendMessage+0x4ad
fffff880`07300950 fffff800`02da2465 : fffff880`00000000 00000000`051fe600 fffffa80`0f137900 00000000`00000000 : nt!PspExitThread+0x223
fffff880`07300a50 fffff800`02da2575 : fffffa80`0f137990 00000000`00000000 fffffa80`0f137990 00000000`7ef01000 : nt!PspTerminateThreadByPointer+0x4d
fffff880`07300aa0 fffff800`02acb8d3 : 00000000`00000000 fffff880`07300b60 00000000`7ef01000 00000000`00000000 : nt!NtTerminateThread+0x45
fffff880`07300ae0 00000000`76e2184a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`051fe668 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x76e2184a
FOLLOWUP_IP:
nt!KeReleaseSemaphore+1e4
fffff800`02ae88a4 0fb6462b        movzx   eax,byte ptr [rsi+2Bh]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: nt!KeReleaseSemaphore+1e4
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: Unknown_Image
DEBUG_FLR_IMAGE_TIMESTAMP: 0
STACK_COMMAND: .cxr 0xfffff880072ffd00 ; kb
BUCKET_ID: INVALID_KERNEL_CONTEXT
MODULE_NAME: Unknown_Module
Followup: MachineOwner

Lemental2
Both of these were inconclusive and were different error codes (BCC). Though Freemake was the active process I think there is an underlying issue. Please run driver verifier as instructed in this wiki. It will give a much better chance
of "catching" the mis-behaving driver.
Please run this test to find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
Driver verifier (for complete directions see our wiki here)
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag

Please help.downloading apps from ovi store over w...

i simply cannot download a single application from ovi store over wifi.its too costly over 3g .please help me.latest firmware updated.

You dont have change your wifi settings.(I hopr you dont have any probs with your internet connection)
Use this installation files and install reps.
http://my-maemo.com/download/repos/extras.install
http://my-maemo.com/download/repos/extras-testing.install
http://my-maemo.com/download/repos/extras-devel.install
And also check your nokia catalogues from appmanager.
"You may loose faith on us.. But never in your selves! From here, the fight will be your own.."
_____________[Protect Transformers]_____________

I have a macbook pro 1175 its a 2006 model which boot camp will work i tried 4.03 but it says this boot camp is not for this machine thats the oldest one i found here please help i have windows 7 32 bit installed but need drivers for the sound

i have a 2006 mackbook pro running windows 7 32 bit i need drivers for the sound and the earliest bootcamp on here is 4.03 my machine says its not for this system please help which version of boot camp can i use

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

IPhone 5 brightness permanently reduced (Please help, voltage issue??)

Hello,
I really need someone with high expertise to help me. Obviously i appreciate any help given but please dont say point less comment like reboot the phone or turn autobrightness off.
Here is the issue:
I have had several iPhones, right from the first to the 5. Lucky me. But i have always had the same issue. The screen brightness is significantly lower than any other iPhone that I compare it to.
Now i have the iPhone 5, if i compare it to anyone elses the brighness is much lower. Autobrightness is off. When i first got the iPhone the brightness was like everyone elses.
i only use the official charger. I think there may be a problem with the voltage or the electricity in my home as all my iPhones have had this problem. Im not sure when the change happens but the something is damaging the backlight of my iPhones. No idea what.
Please can some one with the same issue or knowledge of physics please help me. I dont want to keep having this issue. I also have a Macbook pro and am fairly sure its happned with this also but have no means of comparison as I dont know any one else with one that comes to my apartment.
Regards
Fahad

The iPhone 5 has full Warranty. Make Genius reservation and take to Apple Store. Show the Genius the problem and they will replace your iPhone 5 with a perfect iPhone 5 without problems. If some of iPhone 5 have this problem, it does not matter, Apple makes millions of iPhone 5, some are going to have a problem. When the Genius gives you the new replacement iPhone 5 test it out in the Apple Store before you leave, so you are happy and do not waste anymore of your time.

Please help download complete content set for garageband

I just bought a new iMac (the one without a cd drive!) and I'm trying to download the complete content set for garageband but nothing is working. I can't do anything in the app store and there are no updates to be found. please help!

Flying Toad wrote:
After downloading the '09 version from Apple for free I ran into an error when attempting to install it on my computer. It says "This update does not need to be installed. A newer version of Garageband is already installed."
the problem is that you didn't D/L GBv5 ('09), you D/Led the update for version 5 to v5.1, not the entire v5 installation.
you'd need to either restore GBv5 from a backup, or buy a copy of GBv5 (or v6) from someplace like eBay or Amazon (it's not available for free from Apple)

Very Urgent...Please Help..Invoking Windows Applications

I capture the Windows Desktop screen and saved it as a .jpg file. I then display the .jpg file on frame ( whose size is that of the screen ). Now if i click on the frame, the corresponding Window's application should be invoked ( i.e if I click on the frame where the Start Menu is shown, then the Start Menu should be opened ). Please help me with the code for this. I will be forever indebted to the person who can help me. Iam in very urgent need of this help

Not so easy.A JPG file is a compressed map of a "picture",nothing more. So , You have to get a reference to an object of this map - You can't save to a simple file (JPG) and expect to do what you want to do.Think something else , not a simple snapshot.In Win98 you have a directory "Desktop" where are all of your icons , in Win2000 you have to search in "Documents and settings\User_name\" or something like this to find the same directory and get all icons.Therefrom look for "Properties" and find the path to execute the exe file.It must be something like this I think.Hope have been helpfull.

TS1717 Please help with ATH.EXE

With Itunes running all the time (for sharing on Apple TV) my Windows Vista desktop sometimes become irresponsive.
When I look at my performance in the task manager, I see this ath.exe process draining all the resources of the CPU...
I have told Itunes to quit attempting to sync the Iphone over the network, but it seems to keep trying to do so.
Any suggestions?
Please help.

check out: https://discussions.apple.com/thread/4303319?tstart=0

Please Help - Same issue for years - Mail rule switches itself!

This issue has plagued me with Apple Mail for years and I would like to finally resolve this to keep my sanity. Please help!
We have used the MobileMe family account (5 pack) for awhile and both my wife and I have our own unique email address that is set and we also have one combined account that we use as well. I have some rules in place to help keep the mail organized. Often we will get 1 e-mail for both of us (i.e. a message about a group we are both in or a sports team for our children) - it is sent to our joint account and then the Mail rule will handle putting them in both our boxes.
There is the one rule that keeps changing itself! It's maddening. Here is what I want to occur:
1. I get an e-mail to our joint MobileMe account.
2. The rule will move that specific message to my folder and then place a copy of that message in my wife's folder.
That's it. That's all that I want it to do.
Here is what I put in the mail rule description to make that happen:
IF "any" conditions met:
"Any recipient" is equal to "joint account e-mail address"
Perform following actions:
"Move message" to "my mailbox"
"copy message" to "her mailbox"
"Stop evaluating rules"
That's it. Here is where the problem ensues. This rule will actually work correctly for 1 or 2 times. Then what happens is somehow this rule actually changes itself and when I open up the rule description it will actually show:
"Move message" to "my mailbox"
"Copy message" to "my mailbox"
Ugh. So I end up getting two copies of the same thing and have to physically move it over. It seems so simple and I can't understand why it keeps switching itself.
I've had the issue ever since we had our family account and back to the Tiger operating system. I would love to get this fixed for good!

I may well have missed something, but it seems to me that the command to Copy to her mailbox should come before the command to Move to your mailbox. That way the source remains available until the final Move step. I cannot say why the Rule construction would change by itself, but I can see the possibility of confusion if the Move comes before the Copy.
Ernie

Please help - boot issues, os issues HELP

so i came home after three months and started up my mac. i was having internet issues so i restarted the mac. ever since the mac has been tremendously slow, taking sometime 15 minutes to boot. after that every application runs absurdly slow. i searched the forums and found the suggestion to boot into open firmware and reser pram and nvram.
so i did that. after that the os x boot screem came up and the status bar seemed to be moving faster, but it gets all the way to the end of the bar and then just hangs.
i know have the tiger install dvd in the drive and am trying to reboot, because i saw the suggestion to run a hardware test and a disk repair but i cannot boot to the dvd either.
please HELP! i love my mac and am going crazy without it, having to use the horrible dell laptop my work gives me right now.

If your attempt to boot from Tiger DVD fails, it sounds like the directory on the disk drive is very damaged and corrupt, which can prevent booting.
Do you have a FireWire drive handy?
A backup?
You will need another drive to work from. And either a copy of TechTool Pro 4.5 or Disk Warrior probably.
You could try booting to Single User Mode (command s) and run fsck - though I suspect it will say it was unable to repair, nothing to lose - maybe.
How hard is to to disconnect the internal hard drive? or to replace it? or move it to a external FW/SATA interface case.

Please help update issue

I updated my iphone 3g and now itunes is saying that it's restoring iphone software it's now been doing this for about 5 hours and i'm not even half way through is this normal? someone please help thanks

I had mega problems too. Try following the steps in my posting as below after creating a new user account on your computer with ADMIN priviledges also. See my posting on 20/06/2009 22:33 titled "Upgrade Error number 4 and Restore Error 1603 when going to OS 3.0 - Solved"
And turn off any antivirus and firewall software too, before doing so. In ITunes, highlight your iphone icon and then click the Restore Button on the ITunes Summary tab which seems to force the iphone into an update. Dont try using the Check for update button. Good Luck...........

Please help..Issue on getting parameter from a backend fm

Dear Expert,
I have a requirement which is to edit the ess~cod for the employee communication. I have copy out the function group ZHRXSS_COD_INTERFACE. I created my own function module ZCOD_VALIDATE and attached to the function group. My funtion module are just returning an export parameter and a table without getting any import parameter.
I have create a ZCodModel (pointing to the ECC function group) and the model class is ZCod_Validate_Output. I have done all the reimporting of the model and context binding. My question is why i still not getting any value from the function module. I tested the fm in ecc and it works well.
I have added the following code in do init.
ZCod_Validate_Input Input = new ZCod_Validate_Input();
wdContext.nodeZCod_Validate_Input().bind(Input);
try {
wdContext.currentZCod_Validate_InputElement().modelObject().execute();
wdContext.nodeCod_Validate_Output().invalidate();
} catch (Exception ex) {
fpm.getMessageManager().raiseException(wdThis.wdGetAPI ().getComponent(), ex);
Anyone can tell me why i am not getting the parameter? Please help me.
Thanks.
Regards,
Bryan

Hi Siva,
Thanks for your reply.
I got this error when i execute it? Anyway my function module does also return a table but i have yet to define a context to store it. I am just trying to get the value of the export parameter. If it success, then i can proceed to bind the table. However now, it seem getting an export parameter also giving me problems.
java.lang.ArrayIndexOutOfBoundsException: -1
    at com.sap.mw.jco.JCO$Record.getString(JCO.java:12798)
    at com.sap.aii.proxy.framework.core.JcoBaseTypeData.getElementValueAsString(JcoBaseTypeData.java:669)
    at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClass.getAttributeValueAsString(DynamicRFCModelClass.java:427)
    at com.sap.xss.hr.cod.model1.Zhrxss_Cod_Validate_Output.getNameofposition(Zhrxss_Cod_Validate_Output.java:164)
    at com.sap.xss.hr.cod.wdp.IPublicFcCodBusinessLogicComp$IZhrxss_Cod_Validate_OutputElement.wdGetObject(IPublicFcCodBusinessLogicComp.java:6601)
Thanks.
Regards,
Bryan

Please help in native window concept

Hi friends,
could you please help me in creating native windoew in flex application with a small example.
should i d,any environmental adjustment
because when i declare
<mx:WindowedApplication > as the root tag an error is displayed as
An unknown Item is declared as root of your mxml document . switch to ssource and make a correct to it.
Thanks in Advance!!!!!

Normally, you would create a new mx.controls.Window

TS1717 Please help download issue windows 7

Similar Messages

Maybe you are looking for