TS1717 what does Apple Push Mean??
I am trying to understand what Apple Push Means, in an error and it states Windows needs to shut it down?
Perhaps this will help:
Using the Apple Infrared Remote with the iPod Universal Dock
Similar Messages
-
TS1717 what does error -1202 mean
what does error -1202 mean
From 2nd link below:
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
1. Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
2. Put a USB 2.0 hub between the device and the computer.
3. Try a different USB 30-pin dock-connector cable.
4. Eliminate third-party security software conflicts.
5. There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
6. Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
7. Try to restore from another known-good computer and network.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
what does this message mean: this apple ID has not yet been used in the iTunes store"? I cant connect using my iphone. But it works in iTunes on my laptop.
FAQ apple id http://support.apple.com/kb/HT5622?viewlocale=en_US
http://support.apple.com/kb/HT1311 -
I just recently returned an IPad air and exchanged it for another. I first set up this new one as a new IPad but then deleted all content and settings right away (since I wasn't getting the progress I had made in apps and games) in order to restore it from my previous IPad Air. I then checked after on how to backup via icloud and saw this line under the subtitle of how to restore from a backup, "For best battery performance, leave your device connected to a power source until the restore is complete." What does Apple mean by "for best battery performance"? Im just a bit worried of issues.
p.s. And yes I did have it connected to the power. And the ios is the default ios for new IPad Airs.Welcome to the Apple Community.
It only means you should restore whilst it is connected to a power supply, so that your battery doesn't go flat during the process. -
HT204088 what does error 8008 mean when downloading a movie on Apple TV
what does error 8008 mean when downloading a movie on Apple TV
Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?
Hello AKCamus
To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
What does this message mean? "itunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with ITnes." How do I restore when every time I connect to my computer I get this message?
Perhaps the information in this Apple support article will help:
http://support.apple.com/kb/TS3694#error3004
Regards. -
What does this message mean Charging is not supported with this device?
What does this message mean Charging is not supported with this device?
You've gotten 2 good answers already, but there's a key assumption in both that you got the message when connecting the iPhone to some other device. If this is the case you can get an adapter in the Apple online store that will allow charging from older devices.
If, however, this message appears when you are not connected to anything the problem is dirt or moisture in the dock connector at the bottom of the phone. Clean it with a dry toothbrush or air blast. -
What does this message mean: "power pc applications are no longer supported"?
What does this message mean: you can not start because power pc applications are no longer supported?
Here is a post that I assembled for another who needed to continue to run his PowerPC applications in Lion/Mt. Lion:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
3. Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization. -
Why is the sound of my new ipad cutting out intermittently and what does Apple recommend to solve the problem in lieu of any updates? All of a sudden without changing any settings, the audio on my NEW ipad cuts in and out on applications/ games, keypad noise and lock sounds. The rocker button only seems to work while the sound is intermittently being heard before, after a few seconds of noise not doing anything when sound goes off.
This is highly frustrating as I've noticed others posting about such issues as far back as April. Anybody had the same thing happen to them? Is this likely software (ios6) or hardware issue? What are the solutions Apple???Apple has no physical stores of their own in Dubai, so unless you mean that you purchased from the online Apple Store for the UAE, you purchased from a dealer, who may or may not have been authorized. You can check the expiration date of the warranty on your iPad yourself by entering in the serial number here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
If it does indeed show the warranty has expired, then what you need to do from here will depend on who you purchased the iPad from and when you really did purchase it. Perhaps you actually purchased it in August and are just misremembering? Check your receipt. If you confirm that you did purchase within the last calendar year, tell us exactly where you got it and we can probably offer advice.
Regards. -
when you back up your iphone onto a mac and at the bottom of the screen in says. photos, videos, apps etc. or " other" what does the "other" mean?
See here: https://discussions.apple.com/message/22926419#22926419
-
What does the ~ symbol mean next to an event? I have never seen this before but today when I edited a few events this appeared next to the event.
Greetings,
Hm. I've never seen that in iCal. In some other Applications the tilde "~" indicates a restore point or a before / after for a file. My guess is there is a broken cache file in iCal.
Try:
Go to Apple Menu > System Preferences > Language & Text > Formats > Region. Region should be set to the country of your choice. Do not have it set to "Custom" as this can have unexpected results in the iCal window.
If that doesn't resolve the issue:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Go to iCal > Quit iCal
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
--- NOTE: To get to "Home > Library" in Lion: Click anywhere on the desktop and then click on the "Go" menu at the top of the computer screen while holding down the "option" key on the keyboard. You will see "Library" in the menu.
4. Launch iCal and test.
If the issue persists:
1. Go to iCal > Quit iCal
2. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
--- NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
3. Launch iCal and test.
Hope that helps. -
My iphone plus is bending, what does Apple offer regarding this issue?
I am trying to get to contact with Apple Customer Care, but not clear to me how to do it beside this channel of communication. I bought the phone from kosovar carrier which is under Slovenian ownership. This means that the original warranty comes from Slovenia, bit complicated but still I would like to get an urgent answer how to proceed with this issue, thanksMaybe i should have only asked if anyone is aware on apple's policy
regarding bending. I took the point that this seems not a proper forum to
pose Q's to apple thanks to both
On Wednesday, November 5, 2014, Apple Support Communities Updates < -
How do I do factory reset on an iphone 4? I bought it used and it has a password and when I tried to reset the phone it shows error code 1671. What does that code mean? Thanks
Hello tresacg,
Thank you for using Apple Support Communities.
It sounds like the previous owner has enabled a password on it. The first thing you can try is in this article:
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Regards,
Jeff D. -
How long does Apple push iMessages?
My MacBook Pro has been offline for approx. two months now. When I started the iMessage App today there was no conversation from after the last time my notebook was online. Also I didn't receive new iMessages while being online. The address is the same on all my devices (iMac, iPod and MB Pro). I haven't changed any settings since the setup. So my question simply is how long does Apple push iMessages to iDevices? Even iMessages I had sent on Christmas from my iPad or iMac were not displayed. Although I restarted the app multiple times nothing changed. It would be interesting to know, if the "old" iMessages which were sent from my other devices can be synced to my MacBook in any possible way. Thanks for any help given.
I'm sorry for my bad English.I'm confused guys... yesterday when I did the up-to-date, I was given the code right there in the online Apple store when the 'order' was processed - even tho it was listed as 'free'. Are you not even getting the order processed in the Apple store?
the link posted by mtlscream2 above isn't the shortcut one... use this!
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?partNumber=MD202Z/A
here's what I saw online:
Mac OS X Lion Up-to-Date
$0.00
1
$0.00
Product Number: MD202Z/A
Licensed to:
planetMitch Aunger
Mac OS X Lion Content Code:
redacted
Maybe you are looking for
-
Help - Safari Frames Question?
I'm trying to open a document I sent to my gmail account. I'm using safari and when I open the doc it doesn't show up but instead says, "This page uses frames, but your browser doesn't support them." Same thing happens in Firefox. What's the deal? He
-
How to re-download my programs?
I had my computer whipped and now they wont let me redownload my programs even though I have all the serial numbers. Also would like to point out they have help lines 24/7 hotlines for buying but not for helping clients...
-
Transfer Network settings from one machine to another?
I'd like to transfer my Network locations on my old PowerBook running Panther to my new one that's running Tiger. What files would I have to move over? Is there an easier way to export these settings and import them into the new machine?
-
Help!Could someone kown how to call ArcGIS application within Labview?
For my desigh, ArcGIS must be as a application within Labview.Since I haven't found any information in this field. Could some help? Now I have finished the two individual parts of Labview and GIS module, but the main problem is how to call for GIS mo
-
hi all: recently I write a function that search content from conten by Search,I wanna search result by one property sort as reportdate.so I suse API below : ContentContext context = new ContentContext(); Search search = new Search( -1, "toProperty('r