TS1717 Windows 7: Blue Screens of Death because of iTunes

My computer runs on Windows 7 and ever since I've installed iTunes, I have regurlarly Blues Screens, which only occur when iTunes is running. Any idea about how, why and potential fixes?

Similar Messages

Windows 7 - Blue screen of death after Boot Camp install

Hello! I have done some searches with no answers, so...
After installing Windows 7 from scratch I then install Boot Camp 3.0 which then leads to the Windows blue screen of death upon reboot. I then have to recover Windows to the previous state prior to installing Boot Camp.
Help!?

Most likely, Apple HFS read-only, which is AppleHFS.sys and AppleMNT.sys - rename those and see.
You might want to run chkdsk after all this to make sure there are no errors with the drive and file system.
Windows Explorer will not accept HFS+ filenames with special characters and will "green bar" and hang when it does, too.
The faulty HFS driver is a valid concern.
Rename AppleHFS.sys and AppleMNT.sys
By doing the following you will disable HFS mount / read mode on windows XP, Vista, 7.
Navigate to c:/windows/system32/drivers/AppleMNT.sys, rename the AppleMNT.sys file to something like AppleMNT_keep.sys or something of your likings.
The faulty HFS driver is a valid concern. It seems to happen on many systems.
You find it in Windows/system32/drivers/AppleHFS.sys
Renaming to AppleHFS_disabled.sys will avoid the blue screens until you have found another solution or Apple updates Bootcamp 3
After renaming both myself because they are no longer "*.sys" or something? they are gone. In my case AppleHFS prevented Windows Backup from running to end and was causing error "some files skipped" and while some might find reading convenient, I prefer Windows not have even read-only access.
You can probably do better with MacDrive, or probably Paragon's HFS driver, to read AND write if needed, to HFS from Windows.

Bootcamp Windows 7 Blue Screen of Death on MBPwR

Hello all, I've never needed to use this before but gosh darn it I need some advice, because I can't figure this out...
I'd rate myself a 9 out of 10 in "Windows PC" experience
And maybe a 6 out of 10 with Macs, I'm still new!
I just bought the new Mac Book Pro with Retina Screen in early July, I can't remember the exact date. But it hasn't been thirty days yet, so if you think that's my best bet to try and get an exchange here, let me know.
MC975LL/A
PROBLEM : Mac OSX Lion 10.7 works wonderfully, not a problem in the world, smooth as butter – the issue is Windows. I like to play some games and OSX doesn't play well with some Windows based games so I always install it on Bootcamp. Well, this has been a neverending issue on my new MBPwR because I can't seem to get it to work correctly.
      1. Here's how it started - I installed Windows 7 Ultimate x64 through Bootcamp, via my Superdrive and it ran well for a week or so. After installing a game and some other software (Steam) please take that as a coincidence as I did, I don't think Steam had anything to do with the crash, more likely it was something 'game' related, HDD, RAM, CPU, GPU? The computer started to get the "Blue Screen of Death" that Windows computers get, specifically: page_fault_in_nonpaged_area, I've never seen it before and I've owned a number of Windows computers over the years!
     2. Is this my fault, or something deeper? - I can't figure it out, is this a hardware problem or a software one? I reinstalled Windows 7 yesterday and attempted to try again. Just a chance my installation was messed or something, well it happened literally after five minutes of booting into Windows 7. After it happened the first time I used a memory check and a hard drive check software and both came up flawless. Some online on other boards although Windows based have suggested this error can be caused by the RAM and the CPU or the GPU, even... Is this true? As there is no way to test it, maybe exchanging this computer is the best option?
    3. As as a side note... - Has anyone else had a crawling slow boot into Windows 7? It takes my MBPwR almost five minutes of a top left-hand blinking cursor to actually boot to Windows 7.
So did I have some really, really bad luck here with a new computer? Or is this somehow software related? I can answer any questions if you have them so we can try and figure this out!
Thanks!

Did the Nvidia driver install okay? Some users had to reinsall just the driver from Apple Windows Software Support.
Did Windows DVD not find anything wrong?
Is Windows set to be default boot OS in the control panel for selecting the boot volume?
There probably is a leaning curve and bleeding edge sortof with any new logicboard and setup.
Apple has issued a firmware upgrade for some models - I thought Retina - the MacBook Air has a serious problem under Windows.
Mac will run hotter under Windows. Maybe an error message.
GPU-Z:
http://www.techpowerup.com/downloads/SysInfo/GPU-Z/
AIDA64 Extreme Edition
http://www.aida64.comhttp://www.aida64.com/product/aida64-extreme-edition/overview
CCleaner
http://www.piriform.com/ccleaner
How to view error message:
From Control Panel-> Admin. Tools-> Event Viewer-> Windows logs:
Check Application and System Folders for Red highlit messages. Note that you can right-click clear these log folders.
Memtest
This is a step by step guide with audio and video to explain how to use memtest to see if your memory is defect. Another thing to add is that some errors will not be found on the first pass, best to do at least 3 passes.

Blue Screen of Death When opening iTunes.

I am at a loss. For the past six months I have been trying to figure out why my computer has a blue screen of death and then restarts "nearly" everytime i open iTunes. The "nearly" is what's driving me nuts because every once in a while it will open ONCE and then start crashing again. I don't even do anything to help it open it just miraculously works every now and then. It even craches the comp when starting iTunes in safe mode. The blue screen error says "Page Fault in non-paged area". iTunes worked fine for months before this randomly started happening. I have tried every solution I have seen, even ones that weren't for my problem. So far I have:
Manually uninstalled iTunes and QT and reinstalled the standalone QT then iTunes.
Disabled itunes helper and ipod service before starting.
Disabling all other services and start-up items.
Installed current bios and drivers (as far as I can tell)
Installed current windows installer.
Updated microsoft products including .net
Updated Java runtime environment
Replaced ram
I have a pentium 4 1.6ghz with soyo mobo and a RAID card(mirrior) set-up. 1 gig of pc133 ram. I can ul the minidump if needed.
I figured out how to load my podcasts on my ipod manually but I want to get a video ipod so I need itunes. PLEASE HELP!!
Windows XP

there's a few more things worth checking on. but let's also capture a minidump of the crash and send it to someone who can interpret minidumps.
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
send it to this email address
in the email, put the URL to this discussion thread, so that whoever gets it has some context. Also give as much information about the context of the crash (in the email) as you can.
love, b

Blue screen of death when accessing Itunes store

Whenever I click on the Itunes store, the computer crashes and I get blue screen of death.

You haven't given your operating system.
If you are getting a blue screen stop, it would help if you could post the exact error message. It should be some sort of numbers and text -
0x(zeros/letters/numbers) (CAPSANDUNDERSCORES)
For example:
Stop 0x05 (INVALIDPROCESS_ATTACHATTEMPT)
Also *is a file name mentioned* in the error message? If so give the exact file name
if you're not seeing a blue screen (or just a flash of one), you can use this technique to make hidden blue screens appear:
1) Open your system control panel (Start->Control Panels->System).
2) Select the "Advanced" tab.
3) Click the "Settings" button in the "Startup and Recovery" section
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
There is some general help on Troubleshooting Windows Stop Messages here:
http://aumha.org/win5/kbestop.htm

Windows XP blue screen and 0x00000050 when starting ITunes up

when starting ITUNES after the upgrade to 7.3, I now get the blue screen of death.
Windows XP service pack 2 is installed
message is STOP: 0x00000050 (0xF8ac0000, 0x00000000, 0xF8ac0000, 0x00000000)
I have installed different video cards and removed my sound card from the system but problem still remains. I did change the QUICKTIME settings as suggested for Vista problems but problem still remains.
ITUNES will only run in SAFE MODE
help please... i miss my music

this is the information from the event log viewer. no files are referenced
Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 8/29/2007
Time: 2:21:22 PM
User: N/A
Computer: DAD_ASUS
Description:
Error code 10000050, parameter1 f79f0000, parameter2 00000000, parameter3 f79f0000, parameter4 00000000.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 35 1000005
0020: 30 20 20 50 61 72 61 6d 0 Param
0028: 65 74 65 72 73 20 66 37 eters f7
0030: 39 66 30 30 30 30 2c 20 9f0000,
0038: 30 30 30 30 30 30 30 30 00000000
0040: 2c 20 66 37 39 66 30 30 , f79f00
0048: 30 30 2c 20 30 30 30 30 00, 0000
0050: 30 30 30 30 0000

Windows gives Blue screen of death when connect ipod

I have an ipod 20g and everytime i connect it to my 2.0 usb windows freezes gives me a blue screen and restarts

same problem here, also with a 20gb ipod. Mine also shuts the PC down on a disconnect of the ipod as well although this is less frequent.
I was using the USB2 ports on the front of my Dell but I've swithed them round now and am using a Firewire port on the back and touch wood it hasn't happened in the 2 days since I switched over.

Windows 7 Blue Screen of Death from Apple Wireless Keyboard?

I've installed Windows 7 with Boot Camp 3.0 drivers on my Mac mini, and I suppose overall, I'm enjoying it. However, I'm getting a blue screen that seems almost random. Keyword is almost.
I've got my Apple Wireless Keyboard and Mighty Mouse paired, and they're both working well, however, I do believe I am getting some blue screens from my wireless keyboard.
It seems, at random intervals (usually when I haven't touched the keyboard and mouse for awhile) I get an IRQL blue screen and no information about what's exactly causing it. For example, if I'm sitting in the other room listening to music for awhile, and I come back and press the "next" media button on my keyboard, it'll crash and give me the blue screen. However, I've also tried pressing another random button (shift) to "wake" the keyboard if it had fallen asleep, which also results in a blue screen. The blue screens ONLY show up when I give input via the wireless keyboard. Or, if I leave the computer on overnight to download a file or something, the screen will sleep (which it should) then I'll press a button on the keyboard, the screen will stay asleep, and the computer will restart. Which is just a hidden blue screen I'm assuming.
I've tried reinstalling Windows (Clean/fresh install of course), installing/uninstalling drivers, pairing and re-pairing. I've also removed unnecessary/non-Windows 7 drivers that were installed with Boot Camp.
Outside of this blue screen, I am quite impressed with Windows 7. I just can't figure out what's going on. Is there any place I can get a description of what's causing this crash? Does anyone know what's happening or know a solution to this?
Thanks in advance, if you need more details, please ask.

Experiencing exactly the same symptoms, bugcheck/bluescreen only when touching the Apple wireless keyboard after a period of inactivity.
I have an 20" iMac, just upgraded Leopard -> Snow Leopard latest minor version and updated to Boot Camp 3.1 hoping they provided a fix, but the driver at fault (keymagic.sys) doesn't look updated and the issue is still there
Hopefully someone from Apple dev support is reading this, here's all the info I could squeeze from the crash dump:
=============================================
* Bugcheck Analysis *
IRQLNOT_LESS_OREQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffff80002e33440, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000008, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002e33440, address which referenced memory
Debugging Details:
READ_ADDRESS: fffff80002e33440
CURRENT_IRQL: 2
FAULTING_IP:
nt!IoIsWdmVersionAvailable+0
fffff800`02e33440 80f906 cmp cl,6
CUSTOMERCRASHCOUNT: 1
DEFAULTBUCKETID: VISTADRIVERFAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: System
TRAP_FRAME: fffff88002f2f0c0 -- (.trap 0xfffff88002f2f0c0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff88002f2f100 rbx=0000000000000000 rcx=0000000000000006
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002e33440 rsp=fffff88002f2f258 rbp=fffff88002f2f2b0
r8=fffff80002a4f000 r9=0000000000000000 r10=fffffa80027f3010
r11=fffff88002f2f208 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
nt!IoIsWdmVersionAvailable:
fffff800`02e33440 80f906 cmp cl,6
Resetting default scope
LASTCONTROLTRANSFER: from fffff80002ac0469 to fffff80002ac0f00
FAILEDINSTRUCTIONADDRESS:
nt!IoIsWdmVersionAvailable+0
fffff800`02e33440 80f906 cmp cl,6
STACK_TEXT:
fffff880`02f2ef78 fffff800`02ac0469 : 00000000`0000000a fffff800`02e33440 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
fffff880`02f2ef80 fffff800`02abf0e0 : 00000000`00000000 fffffa80`03375d90 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`02f2f0c0 fffff800`02e33440 : fffff880`04a02e5d fffffa80`02a3add0 fffffa80`027e8b40 fffffa80`02a3add0 : nt!KiPageFault+0x260
fffff880`02f2f258 fffff880`04a02e5d : fffffa80`02a3add0 fffffa80`027e8b40 fffffa80`02a3add0 0000057f`fd5c5228 : nt!IoIsWdmVersionAvailable
fffff880`02f2f260 fffffa80`02a3add0 : fffffa80`027e8b40 fffffa80`02a3add0 0000057f`fd5c5228 fffff880`04a02dfc : KeyMagic+0x2e5d
fffff880`02f2f268 fffffa80`027e8b40 : fffffa80`02a3add0 0000057f`fd5c5228 fffff880`04a02dfc fffff880`00e5a2a7 : 0xfffffa80`02a3add0
fffff880`02f2f270 fffffa80`02a3add0 : 0000057f`fd5c5228 fffff880`04a02dfc fffff880`00e5a2a7 fffffa80`02a3add0 : 0xfffffa80`027e8b40
fffff880`02f2f278 0000057f`fd5c5228 : fffff880`04a02dfc fffff880`00e5a2a7 fffffa80`02a3add0 00000000`00000000 : 0xfffffa80`02a3add0
fffff880`02f2f280 fffff880`04a02dfc : fffff880`00e5a2a7 fffffa80`02a3add0 00000000`00000000 fffffa80`027fd9d0 : 0x57f`fd5c5228
fffff880`02f2f288 fffff880`00e5a2a7 : fffffa80`02a3add0 00000000`00000000 fffffa80`027fd9d0 00000000`00000010 : KeyMagic+0x2dfc
fffff880`02f2f290 fffff880`00e30c9b : fffffa80`027fd9d0 fffffa80`027fd9d0 fffffa80`027fd9e0 fffffa80`027fdc01 : Wdf01000!FxRequestBase::CompleteSubmitted+0x1f3
fffff880`02f2f310 fffff880`00e30dc4 : 00000000`00000002 fffff880`04bbcff7 00000000`00000000 fffff880`04bbcff7 : Wdf01000!FxIoTarget::RequestCompletionRoutine+0x1cb
fffff880`02f2f380 fffff800`02aab935 : 0d780da4`0da40dd4 fffff880`02f2f420 0d440d78`0d780da4 fffff880`04bbeb52 : Wdf01000!FxIoTarget::_RequestCompletionRoutine+0x3c
fffff880`02f2f3b0 fffff800`02ac3516 : fffffa80`027e8f2b 00000000`00000000 fffffa80`027fdc70 fffffa80`027e8b40 : nt!IopUnloadSafeCompletion+0x55
fffff880`02f2f3e0 fffff880`04b62323 : fffffa80`027e8b40 00000000`00000000 fffffa80`02655c10 00000000`00000000 : nt!IopfCompleteRequest+0x3a6
fffff880`02f2f4c0 fffff880`04ba24be : fffff880`02f2f590 fffffa80`027e8b40 00000000`00000000 fffffa80`0294f600 : bthport!BthCompleteRequestEx+0x5b
fffff880`02f2f4f0 fffff880`04b9c8d4 : 00000000`00000000 00000000`00000001 fffffa80`02a50c40 fffff880`02f2f6e0 : bthport!L2Cap_CompleteReadIrpList+0xc2
fffff880`02f2f540 fffff880`04b70732 : fffffa80`03349530 fffffa80`0294f5f0 fffff880`00410001 00000005`00000002 : bthport!L2CapInt_ProcessReadBip+0x430
fffff880`02f2f6d0 fffff880`04b70078 : fffffa80`0267f230 00000000`00000000 fffffa80`029b5402 fffffa80`02670000 : bthport!HCI_ProcessAclReadBip+0x642
fffff880`02f2f7a0 fffff880`04b988d9 : fffffa80`0267f230 fffffa80`03036702 fffffa80`026c0ab0 00000000`00000000 : bthport!HCI_ProcessAclRead+0x214
fffff880`02f2f810 fffff880`04b66201 : 00000000`00000000 00000000`00000000 00000000`00000056 fffffa80`026c0ab0 : bthport!HCI_ProcessMpBip+0x61
fffff880`02f2f880 fffff880`04b4d327 : fffffa80`0294f4f0 fffffa80`026c0ab0 00000000`00000000 fffff800`02ac59fa : bthport!BTHPORT_RecvMpBip+0x41
fffff880`02f2f8d0 fffff880`04b5399f : 00000000`00000000 fffffa80`00cd3910 fffff880`04b56388 fffffa80`00cda820 : BTHUSB!BthUsb_ReadTransferComplete+0xf7
fffff880`02f2f930 fffff880`04b53c31 : 00000000`00000003 fffff880`02f2f9f0 fffffa80`00ca2d00 fffffa80`00000012 : BTHUSB!UsbWrapWorkRoutine+0x17b
fffff880`02f2f9b0 fffff800`02ac3516 : fffffa80`00cd3bdb 00000000`00000000 00000000`00000000 00000000`00000000 : BTHUSB!UsbWrapInterruptReadComplete+0x1dd
fffff880`02f2fa40 fffff880`044135d9 : fffffa80`01e81050 fffffa80`00cda700 00000000`00000000 00000000`00000000 : nt!IopfCompleteRequest+0x3a6
fffff880`02f2fb20 fffff880`04413ab7 : fffffa80`028ef502 fffffa80`00cd3910 00000000`ffffffff fffffa80`01e81ea8 : USBPORT!USBPORTCoreiCompleteDoneTransfer+0xa15
fffff880`02f2fc00 fffff880`0441164f : fffffa80`01e81ea8 fffffa80`01e811a0 fffffa80`01e82040 00000000`00000000 : USBPORT!USBPORTCoreiIrpCsqCompleteDoneTransfer+0x3a7
fffff880`02f2fc60 fffff880`04402f89 : fffffa80`01e81050 00000000`00000000 fffffa80`01e81e02 fffffa80`01e81ea8 : USBPORT!USBPORTCore_UsbIocDpcWorker+0xf3
fffff880`02f2fca0 fffff800`02acc5dc : fffff880`02f07180 fffffa80`01e81ea8 fffffa80`01e81ec0 00000000`00000000 : USBPORT!USBPORTXdpcWorker+0x1d9
fffff880`02f2fcd0 fffff800`02ac96fa : fffff880`02f07180 fffff880`02f11f40 00000000`00000000 fffff880`04402db0 : nt!KiRetireDpcList+0x1bc
fffff880`02f2fd80 00000000`00000000 : fffff880`02f30000 fffff880`02f2a000 fffff880`02f2fd40 00000000`00000000 : nt!KiIdleLoop+0x5a
STACK_COMMAND: kb
FOLLOWUP_IP:
KeyMagic+2e5d
fffff880`04a02e5d ?? ???
SYMBOLSTACKINDEX: 4
SYMBOL_NAME: KeyMagic+2e5d
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: KeyMagic
IMAGE_NAME: KeyMagic.sys
DEBUGFLR_IMAGETIMESTAMP: 49c160ec
FAILUREBUCKETID: X640xA_CODE_AV_BAD_IPKeyMagic+2e5d
BUCKET_ID: X640xA_CODE_AV_BAD_IPKeyMagic+2e5d
Followup: MachineOwner
---------

Hp mini wa545ua#aba windows 7 blue screen of death and won't load operating system

I tryed to run my computer and the blue screen came up and it wouldn't load micosoft help

To enter the BIOS filip the power button and quickly tap the F10 key.
Select the Diagnostics section and run a memory test and a hard disk self test.
Post your results here.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HP Pavilion 750n - Windows XP Blue Screen of Death Error

Hello everyone - I hope I can get a reply to fix my son's computer (I can't afford to buy a new one).
I received the blue screen of doom and I was not aware that Windows had a patch to fix this before the error occurred. I tried to restore my system to when I first bought this computer without losing all my data (specially my pictures). Now the system starts but it gets stuck on the page that asked if you want to logon on Safe Mode or Regular Mode, etc. No matter what I choose the system keeps coming back to this same screen.
I read the following on the HP web side but I'm not sure how to get this diskette/cd or whatever they have available:
Preventing a Windows XP Critical Error
If you purchased your HP Pavilion home PC between September 2001 and February 2002, your PC may experience a Microsoft® Windows® XP critical error. To prevent an error that may cause your computer to be unusable, HP strongly recommends that you go to the Microsoft Windows Updates Web site to download all critical updates. Without these updates, an Unmountable Boot Volume error may occur randomly, and if it does, the error creates a blue screen with the message: A problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME…Technical Information: *** STOP: 0x000000ED
If this error occurs, you will be unable to fix the problem without a diskette that you can order from HP Technical Support.
The system won't let me send HP an email and I can’t see how to contact them just to ask for a price. Perhaps, there may be another place where I can get the diskette for this fix - does anyone know how to get the diskette or if I can download the fix from somewhere else?
Any help will be greatly appreciated!

Get BartPE or Ultimate Boot CD and you should be able to get the computer to a state that will allow you to copy your files.
If you have a spare computer or HD, configure the problem HD as a slave and you should be able to access your files.

Itunes 64 bit and windows 7 blue screen of death

Just installed Itunes 64bit on my new HP laptop and after a restart the computer had to be rolled back to start again. Is there a fault in Itunes....?
The very first problem with Windows 7.

Something may be awry with the special registry permissions on the My Music folder, Just. I think the iTunes installer looks for those in order to determine just where the default location of My Music is on a given computer.
But since this is a first-time install, the situation should be pretty simple to recover from.
Hold down the shift key when you go to launch iTunes. In the dialog box that comes up, select "Create library" and put the library where you please.
Probably a good idea after doing that to try launching iTunes again, just to make sure that it is still finding the iTunes folder. But by default, next time you open iTunes (after creating a new library), it should try to open the library in the location you created the library in.

Windows 7 Blue Screen Of Death (BSOD)

Hi everybody,
a week ago my laptop showed for the first time a BSOD. I'm 90% sure that it is a hardware issue. Sometimes when i lift/move it or even press with my hands in certain areas it appears the following symptoms:
the screen will immediately freeze or
it will reboot or
a BSOD will appear
I have checked other topics and i found that these files can be useful:
https://www.dropbox.com/s/dnh40wkdvhv2efm/Minidump.rar
Additionally, I have noticed that the BSOD error code is not the same everytime. The last time was this one i think:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1032
Additional information about the problem:
BCCode: 50
BCP1: FFFFD46000105629
BCP2: 0000000000000008
BCP3: FFFFD46000105629
BCP4: 0000000000000007
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
I would really appreciate any help. Thank you

These crashes were related to memory corruption (probably caused by a driver).
Please run this test to find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
Driver verifier (for complete directions see our wiki here)
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag

Windows 7 blue screen of death.

I bought toshiba statelite P300-19P.An error poped up usuauly when i was using the laptop.The laptop heats up quite good bit but does not over heat.Now the windows doesnt boot goes into recovery program and the laptop turns off when i turn it on goes back into recovery program it doesnt boot.I had a person to look at the laptop but he didnt find the source of the problem i'd like a solution if it is possible.The laptop isint brand new!i have it for good few years. i also read online that it could be RAMS or VIDEO CARD i have checked the RAMS the original that where in the laptop dont work in the laptop anymore i have replaced them with ECO RAMS 2x 2.00gb and they work please help me find an solution thanks for your time appreciate it

See the section System Recovery Options and Restoring the pre-installed Spoftware, which begins on p.3-9 of the User's Manual (attached).
-Jerry
Attachments:
P300UserManual.pdf ‏4104 KB

Windows 8 Blue Screen Of Death (BSOD) BAD_POOL_CALLER

Hi,
I have been using windows 8 for the past week and have issues with BSOD appearing at random intervals and over the lat few days more frequently. After performing several rebuilds of the OS and carefully selecting Windows 8 supported applications i still
continue to receive this error.
I have reviewed the minidump files and the cause of the issues seems to be with ntoskrnl.exe
I have contacted microsoft support and sony vaio support and they advise e to rebuild every time or restore the system to a previous working version. Unfortunately this does not resolve the issue and i find myself back at the beginning again.
Could anyone advise on this issue and how to resolve?
Thanks
Matt

hi, i am using windows 8 on sony waio and i am getting this error. I guess i am getting this error when i am using dongle of idea net setter(huwaie) but as you suugested i have the link to my newest dmp file. please go through it and suggest what can be
done.
update the huawei driver:
* Bugcheck Analysis *
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff880068210aa, The address that the exception occurred at
Arg3: fffff88005be5568, Exception Record Address
Arg4: fffff88005be4da0, Context Record Address
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - Die Anweisung in 0x%08lx verweist auf Speicher 0x%08lx. Der Vorgang %s konnte nicht im Speicher durchgef hrt werden.
FAULTING_IP:
ewusbwwan+210aa
fffff880`068210aa 440fb608 movzx r9d,byte ptr [rax]
EXCEPTION_RECORD: fffff88005be5568 -- (.exr 0xfffff88005be5568)
ExceptionAddress: fffff880068210aa (ewusbwwan+0x00000000000210aa)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff
CONTEXT: fffff88005be4da0 -- (.cxr 0xfffff88005be4da0)
rax=5757575757575757 rbx=0000000000000500 rcx=26b791d663d80000
rdx=0000000000000000 rsi=0000000000000001 rdi=fffff980133c6bb5
rip=fffff880068210aa rsp=fffff88005be57a0 rbp=fffff980133c6bbd
r8=0000000000000000 r9=fffff88005be5400 r10=00000000ffffffff
r11=0000000000000000 r12=0000000000000480 r13=0000000000000001
r14=fffffa800858c000 r15=fffff980133c6b00
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
ewusbwwan+0x210aa:
fffff880`068210aa 440fb608 movzx r9d,byte ptr [rax] ds:002b:57575757`57575757=??
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - Die Anweisung in 0x%08lx verweist auf Speicher 0x%08lx. Der Vorgang %s konnte nicht im Speicher durchgef hrt werden.
EXCEPTION_PARAMETER1: 0000000000000000
EXCEPTION_PARAMETER2: ffffffffffffffff
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80012d5a168
GetUlongFromAddress: unable to read from fffff80012d5a1f8
ffffffffffffffff
FOLLOWUP_IP:
ewusbwwan+210aa
fffff880`068210aa 440fb608 movzx r9d,byte ptr [rax]
BUGCHECK_STR: AV
LAST_CONTROL_TRANSFER: from fffff88005be0000 to fffff880068210aa
STACK_TEXT:
ewusbwwan
0x0
0x0
ewusbwwan
IMAGE_NAME: ewusbwwan.sys
Loaded symbol image file: ewusbwwan.sys
Image path: ewusbwwan.sys
Image name: ewusbwwan.sys
Timestamp: Thu Dec 23 05:18:25 2010
"A programmer is just a tool which converts caffeine into code"

Windows 2000 "blue screen of death" after a small number of gpib reads - related to gpibclsd.sys

Labview 6i gpib drivers 1.7
If I just keep just reading (I stripped the operations down to "reading" to track this down) from the GPIB instrument (HP3456A) in a FOR loop every 2 seconds
- somewhere after 10<100
reads Windows 2000 crashes with an error related to gpibclsd.sys Seems like some sort of buffer overflow.
This is a bit annoying, as I have just now finaly learned Labview and have it ready to do something for me.
I would say "close but no cigar"...

alas, I have done so.
I deleted the i.7 drivers and started the
installation of NI-488.2.2.1
The setup program hangs on launch but running the individual .msi's got the drivers installed. Although the board is present and working properly according to the device manager - MAX fails to detect the board. When the troubleshooter is run the board can not be sequentially verified - with an unknown hardware error.
I just notice Visual basic gpib access does not work either. I don't know whether its HW or SW at this point.
Thanks for the help though.

TS1717 Windows 7: Blue Screens of Death because of iTunes

Similar Messages

Maybe you are looking for