TS1741 I have my ipad2 playing music to my Apple TV. But can't get photos or videos that I took from my photo library to the tv. What am I doing wrong? Thanks for any help..
I have an ipad2 and iPhone 4. Trying to get photos and videos from the ipad2 to apple tv. My music is playing fine on the tv, but how do I get the photos and video onto the tv? Thanks
Welcome to the Apple Community.
Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
When displaying the content you wish to mirror on the iPad 2, iPad 3 or iPhone 4s, double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.
Similar Messages
-
I have just purchased a new computor. I had Lightroom 5.7 on the old computor and need to know how to go about downloading the program to my new computor. Thanks for any help you can provide.
Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh -
I have tried everything I know of. It worked fine an hour ago. I have a white screen, buttons will not turn it off and I get get to anything. Any ideas whats going on?
Thanks for any help.Sunny1963 wrote:
I have tried everything I know of.
That's fine - except nobody here knows what you have been able to think of try to this point.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
It really helps if you let others know "what you know of" and already tried. -
I upgraded from iPhone 3G to 4S a few days ago. When setting up the new 4S, I choose to restore my last 3G backup. It started by updating the OS to version 5.1 (9B179) then restored my apps and setting. Everything went well except that I realized I do not have the new apps which come with the 4S, like FaceTime, HD video and Siri.
What should I do to correct this?
Thank you in advance for any help on this.Ah, FaceTime is not an app, either. It's accessed by tapping the FaceTime button when you are in the contacts app and have selected a contact. This can also be done from the Phone app under the Contacts tab, or during a call, you can switch to FaceTime.
Let me know what other apps/features you are missing. -
Hi. I am new to using an iPad. I have set up an icloud email address for use by all the family.. I want to set up my own as my pop email does not seem to work well on this apple platform. I have tried to self help but I'm being asked to access the icloud mail preferences. I can't seem to do that. When I go into my mail app it takes me straight to my in box. I can't find a way of accessing preferences. Can someone help please?
An Alias would be an email address that is delivered to a different account's inbox.
For instance if you have [email protected] and have [email protected] Then [email protected] would be an alias if mails from that address arrive at the icloud address.
If you want to add a completely different account, with a spearate inbox, like an account in hotmail and one in say yahoo mail. Then as has been pointed out, you need to go into the Settings Icon, Tap on Mail, Contacts, Calendars, and then on add account. The iPad has several services preconfigured, you can tap on one of those from the list to setup an email for that service. Such as Hotmail, Gmail etc...
Or you can tap on other to add a personal pop3 or imap type email like from your office, or your school. -
I anyone else having this problem? I have the correct apple id on all my apple products
On the iOS devices, go to Settings > iTunes and App Stores and sign out of the Apple ID. Restart the devices and sign in. You ought to be able to enable iTM on the device now.
-
A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.
Hi 22chill,
I recommend that we delete and re-download the movie from your purchase history:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks,
Matt M. -
Hi, i have edited a clip in hd with final cut, now I need to export it in 2K format. anybody knows how i can do it in FCP? in internet I found only few info about 2K format: no more than frame size. nothing about codec or similar. thanks for any help.
SoCal thanks for the attention,
sorry for having wrote the question directly in the subject, but first i wrote it by text edit then copied it, but in the wrong place too.....
coming to my question, timeline settings are:
as it is a commercial promo that must be projected in a multiplex cinema, the 2K format is needed.
I've heard about transcoding services, and they are very expensive.
so i'm looking if there is a way to do everything by fcp.
the project will be delivered as SD DVD for archive pourposes and as a single file for the projection or eventually transconding.
p.s.: sorry for my english, i'm from italy: had my last english lesson 35 years ago! -
My Macbook was stolen. I noticed the following morning that it was locked, so I 'clicked' play sound, and erase at next internet connection. I received notice that it played the sound, but not that it has erased. Wondering if Apple and/or iCloud tracks the last IP address that my stolen macbook connected to the internet. Thanks for any help!
Hi SteveC619,
Welcome to the Apple Support Communities! I’m sorry to hear about your Mac. If you’ve erased the Mac, all requests for notifications when it is online will be cancelled. Your next best step may be to report the property as lost or stolen with your local law enforcement. For more information, see the following resource:
If your Mac is lost or stolen - Apple Support
http://support.apple.com/en-us/HT6318
What if my Mac is shut down or offline?
If your Mac is turned off or offline, you can still use Find My Mac to request a notification when it’s located, or lock or erase your Mac remotely. The next time your Mac is online, the actions take effect. If you remove your Mac from Find My Mac when it's offline, your requests are cancelled.
3. Report your lost or stolen Mac to local law enforcement. They might request the serial number of your computer. You can find this information on the original box or receipt you received when you purchased your Mac, or on Apple's My Support Profile site if you registered your Mac.
- Matt M. -
I need to upgrade my MacBook 13" white 2008 hard drive. I have found a WD6400BPVT western digital Scorpio blue 640GB (5400rpm) SATA 8MB 2.5" will this fit and work? Many thanks for any help
I had a 640GB HDD in my Early 2008 Macbook and it was just too much it would always freeze up the computer a bit for only a few seconds but ya. Then I realized that it was the size of the HDD that was causing it since the Early 2008 Macbook models can only handle a MAX od 500GB while the Early 2008 Macbook Pros could have a MAX of 640GB (Lucked out there!) lol But ya the Early 2008 Mocbooks can only handle a MAX HDD size of 500GB and that's it!! lol
-
Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.
Is there another way to adjust tempo of loops the faster way, any other technique?No clue why the final processes have suddenly started to take so long. Two things I'd try: a) capture from an older tape to see if some problem with the new tape is at fault. And b) check the health of your RAM and the hard drive.
The red frame sounds a bit like a glitch we used to have in OnLocation (actually in its predecessor HDV Rack) which was caused by a partial GOP. But that was a product of HDV Rack recording from the live video stream. It turned out that HDV cameras intentionally interrupt the data stream for an instant upon starting to record--specifically to avoid recording a partial GOP to tape. So my gut says that the tape has partial GOPs at the points where you stopped/started recording. -
I have two iPads and giving 1st gen. to my grandson. Using my Apple idI for both... can we use different passwords to access our "own" apps. Also I don't want the downloaded App to go to both iPads. Been looking for hours for an explanation! Thanks for any help.
Look at this link.
Giving your former iPad to a spouse or family member: the quick guide
http://www.tuaw.com/2012/03/17/giving-your-former-ipad-to-a-spouse-or-family-mem ber-the-quick/
How to Share a Family iPad
http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
iOS & iCloud Tips: Sharing an Apple ID With Your Family
http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
Cheers, Tom -
My wife and I each have our own email address and calendar. These are on one IPad. The Ipad has a single ICloud account.
What's the best way to backup both Calendars, etc? Does ICloud automatically back up every account on the same IPad? (I checked ICloud, but I could only find my stuff.)
Thanks for any help!
AlanFirst, you need to understand that there's a difference between "syncing" and "backup". Backup is the saving of content and settings, where syncing is the bidirectional transfer of content for an account to a web-based server (like iCloud, Gmail, Yahoo, etc.)
If you see your calendar in your iCloud account, that implies that you have set up your iCloud account to host (sync) your calendar, and perhaps contacts, email, and notes. An iCloud account can only sync one user's information at a time so it is intended to support a single user. You can have more than one iCloud account, and you can even have more than one iCloud account on the same device (but one has to be primary, and the secondary iCloud has limited capabilities), but a single iCloud account only supports a single user's content.
Backup is the saving of your device's content and settings to use in case you need to recover these things, but you can't see the contents of your backup (just the size and device name). You can backup more than one device to iCloud and you can backup to iCloud or you can backup to your computer, or both (one at a time though, you have to choose).
So, if your wife has her own email and calendar she can certainly do that in parallel to whatever account(s) you have for email and calendar. But if you have only one iCloud account then only one of you can use it for email, calendar, etc. But the backup of these accounts is really just a backup of the device's settings that link the device to these accounts. For example, if she uses Gmail then the backup of the iPad only backs up the fact that your iPad is set up to use her account, it does not backup the account itself (the content of her account is saved and preserved on Google's servers, not your device's backup).
Does that make better sense? -
TS1368 I cannot connect to the iTunes Store. I receive Error Code -1202. This problem began yesterday. I have been successfully connecting to the store for months on this PC. I am running Windows 7 and the Windows Security Center. Thanks for any help.
Hello alankilner,
And welcome to Apple Discussions!
Using Proxy: Yes
Try temporarily disabling this setting by following the steps outlined in this Apple support document.
http://support.apple.com/kb/TS1490
B-rock -
Hi....is it possible to print from iPad to a HP Officejet Pro 8500 A909 printer? Thanks for any help!
The HP Officejet Pro 8500 A909 is not an AirPrint printer, if that is what you're asking. HP has proprietary apps that may be suitable for your needs.
To print directly from an iPad / iPhone you will need an AirPrint compatible printer or another device to act as a print server. That can be a Mac computer running Printopia ($19.95 with free trial) or handyPrint (donation - supported). The Mac must be "on" but may be asleep for them to work. Equivalent PC options may exist but you're on your own finding them.
You can also buy this standalone print server:
http://www.lantronix.com/it-management/xprintserver/xprintserver.html
These options enable you to use any printer available to your Mac, even older ones that may predate AirPrint by decades.
Otherwise you will need to buy an AirPrint printer or multifunction device.
Maybe you are looking for
-
Exchange 2013 SP1 RU4 Public Folder Permissions
Hi All, Exchange 2013 SP1 RU4 Public Folder Permissions We have a weird problem after migrating our PF from Exchange 2010 to 2013. Users do not have permission to create or delete in PF even thou they have owner permissions. Example:- I have created
-
No valuation type at Goods Receipt Purchase Order
Hi, No valuation type at Goods Receipt Purchase Order and have to manually input the valuation type. How to default it so that the valuation type is populated automatically and gray out without any changes to the valuation type ? Thanks.
-
These are some of the problems I've encountered in Lion so far using it in my Mac Mini Mid 2010: 1. Screen Sharing is broken from the iPad (sometimes it works and sometimes don't). It may need iPad apps updates, this was working fine in Leopard. I us
-
Calendar theme editing? Changing layout of Calendar photo's.
I want to rearrange photos on calendar in a slightly rotated layout. That is not perfectly vertical or horizontal. I want to lay them on the calendar in MY arragnement rather than the canned layouts from Apple. Is there anyway to rotate photos just a
-
Hi, I have created one table(internal table) in se11 and also have assigned some fields are as primary keys.I know that when we define primary key for one field the system will create primary index for that as ' 0 '.now my question is how to see and