TS1741 The apps can't found Apple TV. Already checked both are on the same network. And I use it before. Don't know what's going wrong.
The airplay and remote always have problem
I always have problem when connect my iPhone and iPad with Apple TV.
I did restart all the devices and router.
Something wait a few hours it will work again.
Anyone can help?
Answers can only be as helpful as the details provided, and there is very little hear to go on. What happens when you try to connect? Is there an error? If so what does it say. How are the devices connected? WiFi, Ethernet? Which ver of ATV do you have? Best guess is that you are using WiFi and the probably go away if you use a wired connection to ATV.
Similar Messages
-
I hope someone can help with this. Thanks
BTW, I am using an iMac
JJThanks Roger
I just figured out that submitting through https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/publishPodcast (found through the podcasts section in iTunes) works where https://phobos.apple.com/WebObjects/MZFinance.woa/wa/publishPodcast (found at the "Submitting a Podcast" link at http://www.apple.com/itunes/podcasts/specs.html#submitting) does not. I had my custom built system hard linked to the other URL and it failed every time after providing the URL to the feed in iTunes and submitting my Apple ID. -
What is restoring and why do i 'have' to restore to connect to iTunes and can I really get all my stuff back because I have a homework essay saved on my notepad and all my apps and music. Help I don't know what to do!
Unless this program will get the iPod out of recovery mode
RecBoot: Easy Way to Put iPhone into Recovery Mode
You will have to restore and thus erase the iPod. If you stuff is in a backup y can restore from backup. Otherwise it is lost. -
Since installing iCloud, my iPhone 3GS no longer syncs with my Outlook2010 Calendar and Outlook2010 Contacts. I don't know what else to try, short of resetting the iPhone and completely reloading as a new device. Any ideas, anyone?
It's good to know. The Apple instructions for loading iCloud on a PC just seem to have either overlooked or hidden this limit. The larger problem is that it partially works: partially and erratically. So clean-up is great fun.
-
Attempting to connect my MacBook to my 4s iPhone. I have had them connected in the past to use the "hands off" function. Today it tells me "network unavailable" make sure network access is enabled. I don't know what to do. I love the hands off feature as my iPhone is never with me when on my mac! I'm not sure what to do. Both are "discoverable" via bluetooth and show up on each device but when I try to connect it says "network unavailable". HELP!
An iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458 -
I don't know what is going on with the White Balance (WB) and LR. I had no problem before but recently LR started to change the WB as it is importing photos. I checked the color scale for my photos and LR and both are with sRGB. Now instead of LR changing the WB it is giving me a second copy with a new WB. Your advise is very much needed and appreciated. Thank you.
Can you show us a screen capture of this 2nd copy with a new WB in your Lightroom grid? Thanks
Are these second copy photos by any chance photos that had been previously imported? -
My Mac mini time capsule is showing an error Time machine error, backup disk image "/volumes/data-1/.sparesbundle " already in use. I don;t know what this means, can someone help?
I had a similar problem and I solved it as follows -
In Time Machine - > I deselected time capsule Data Disk as a destination.
Then I pulled the power plug on the Time Capsule, twiddled my thumbs for 15 secs, plugged the power back in.
Went back t Time Machine -> Re-Added the Time Capsule Data Disk as destination. And then tested by selecting Backup Now.
All went well and the backup picked up from before the problem.
BTW - I also have a USB drive connected to Time Capsule that is an alternate disk for Time Machine to backup.
In Mountain Lion the GUI lets you add more than one Time Machine backup destinations very easily so I think it a good idea to have redundancy.
Hope this helps. -
For the past month, I've had an echo of my voice while I'm talking on my phone. It's very annoying and sounds like multiple people are speaking at the same time and it's only me. Anyone know what's wrong?
For the past month, I've had an echo of my voice while I'm talking on my phone. It's very annoying and sounds like multiple people are speaking at the same time and it's only me. Anyone know what's wrong?
-
I keep getting the same dialogue box upon opening Firefox but don't know what to do about it
I keep getting the same dialogue box upon opening Firefox but don't know what to do about it "Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions and your hard drive is not full or close to full. It is recommended that you exit the browser and fix the problem. If you continue to use this browser session, you might see incorrect browser behaviour when accessing security features." I have gone to tools - general tab - browse files - but it wont let me browse or set a place to staore files. Any ideas?
Try the procedures shown in this link - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component
-
My ipad screen has gone black and I don't know what to do the screen still works and I can still unlock it and I can still type. But I don't know what to do can anyone help me it will be much appreciated
If the reset doesn't do it then it's possible that the backlight or another part of your screen has broken. Unfortunately it's not really user servicible. I'd make an appointment at your local apple store and have them check it out. If your device is still under warranty and they don't determine that the damage was the result of 'abuse or neglect' (their words) then it could be a free replacement.
I'd just do a backup before you take it in, just in case. -
I have to transfer volume licensing CS6 design and web premium (between 2 End Users) but I don't know what is the right module. I found some, in Adobe's website, but all different...
One module for transferor
One module for recipient
One module for both parts
I filled the forms, I signed them , I called the assistance for case number and they've sent me another module:
one module for both of parts, without field for to insert serial number...
What have I do? Which module must I use? I'm becoming histeric!
Thanks to all for help
LetiziaVolume Licensing
http://helpx.adobe.com/x-productkb/policy-pricing/volume-licensing-site.html -
How can I share the apps that I have bought on iPhone? Both are with same user ID
I have bought new iPad and have some apps that I want to share from iPhone. I am using the same user ID and wast able to figure out a solution for the same. Cn anyone guide me
You can download the apps again on the iPad in the App Store - by tapping on the purchased tab and then find the apps and tap the cloud icon in order to download them again.
If you want to add all of the app data and settings that you have already created on the phone for these apps - you will have to restore the iPad from the iPhone backup.
You should transfer all apps on your iPhone and on your iPad in your iTunes library on your computer. The way to do that is, with your iPhone connected, at the iTunes menu bar go to File and select Transfer Purchases from - the name of your iPhone. Then do the same with your iPad before restoring your iPad from the backup for your iPhone.
Follow the restore with a sync with iTunes to ensure that all of the apps and other content did transfer to the iPad. -
about says i have 10.7.2 yet app store on mac mini says i need to update it,
what to do? applecare rep rude says ignorei appreciate the help since Applecare is not helping,
and these replies have not helped, things have gotten worse,
first even though you tell me i dont need the update, i still don't like seeing
an update is available every time i go to macappstore,
next three times now I downloaded the update, it is the whole 3.79 gb Mac OS 10.7.2
i do the long download for the update,
and install and give whatever they ask in passwords etc,
then it reboots and go through all the new installation crap
that I need to do
it is getting to be like a Microsoft project here,
and i cannot get google to show me the way or Applecare
with the one year left on extended support, and these apple communities
don't get me wrong, i am greatful for any help,
especially since Apple care refuses to help,
when they are paid to help
you guys and gals are volunteers and mean well, even though you want to be right about what you say,
the point is it says I need an update for the 10.7.2 and won't give me the update
and take the update off,
now if you say it is something i do not need and it is a glitch with macappstore,
then why doesn't it get fixed or someone else complain about it?
sorry if this offends Apple Zealots which i am one,
I have a windows netbook but I am having more trouble with the latest mac and Icloud which I paid for extra service
and two iphones and i am frustrated, that on the iphone and itunes apps are missing and itunes does not have a direct chat line to help but that is for another forum, just putting it out there. -
My imac won't pick up the printer either. Even after I updated it's software. My ipad is new. Any help would be appreciated. Thanks!
No change. The printer still doesn't show up on my devices even though they are all on the same network. On the printer's connection print out the connection reads Pass and that the network is working correctly. However, then it states "*A router/access point channel conflict has been detected. If you have problems printing or scanning, Improve your wireless network environment." "*If the problems persist, see your documentation for help and networking tips."
I've gone through all the documentation and still can't figure out what the problem is. I've had the router checked out by my building and they claim everything is in order. I have a excellent signal. -
it wont turn on after reset to factory settings
there is a program called recboot. you can download it for free in two parts. one part takes your device out of recovery mode and the other puts it into recovery mode. ive used it before but it doesnt always work and you have to be patient. try it and tell me what happens
Maybe you are looking for
-
Hello Forum Is it possible to use wildcards in alerting rules? I want to build one, which is triggered when there is a partner entered. So I filled the field with "?*" for "at least one character". Will this work? Regards Christian
-
Creating & Using .jar files and manifests
I've read through hundreds of online tutorials on creating and using .jar's, but it's surprising how unhelpful they really are. I've been trying to make a java program of mine standalone, so I can distribute it to others and allow them to run it with
-
We use 11g with the OCI library. A session pool was created for the server process (OCISessionPoolCreate), and a session was obtained in a thread (OCISessionGet). Is it sufficient to call OCISessionRelease(...,OCI_SESSRLS_DROPSESS) in the thread, a
-
Iphoto quits unexpectedly when tagging faces
I´ve got about 25K photos in my collection, thousands of them have been tagged (roughly 100 people). (Says 8K or so are still to be tagged.) Suddenly (happened a few months back), whenever I try to tag untagged photos, iPhoto will quit unexpectedly.
-
Problem with J2eeSDK1.4Beta2
Hello, I installed yesterday j2eesdk1.4beta2. I wanted to connect to LDAP server using JNDI. but I failed, even if my classes were simple. Today I tried to use the deploytool that comes with the j2eesdk1.4beta2, to create a servlet (that is working,