TS1760 Time machine backup does not appear Time Capsule

I have backed up my imac on my Time Capsule using Time Machine. Now, I want to restore this backup on my Macbook so that both computers are the same.
However, when I attach the Time Capsule to the Macbook, I do not see the backup that I just made from the imac. There is nothing to restore.
What to do?

You have to start with the Mac OS X DVD that came with your computer to restore your backup

Similar Messages

  • Time machine volume does not appear but backup works..

    Hi. I have a Sno Leo server used for Time Machine backups. When I try to add a bew user to the backup, the backup volume does not appear (Time Machine Prefs > Select disk). The backup clients that have been previously set up work as normal.

    In the Finder, press the key combination shift-command-C, or select
    Go ▹ Computer
    from the menu bar. A window will open showing all mounted volumes. Select the one in question and open the Info window. What is shown as the Format in the General section? If it's not "Mac OS Extended," Time Machine can't back up the volume.

  • Time Machine Backup does not fit on HDD

    Hi,
    I have a very odd problem. I do have a 750GB hdd in my macbook pro. My external time machine backup drive is 1TB. After haveing some issues with my system I had to reinstall OSX. Now I want to recover my system from the external drive. When I run through the recovery process formatting the 750GB drive the drive utiliity tool tells my that I have 748GB available. When I get to to the point to chose the target for my recovery partition of the 748GB only 697GB are left. Now, of course) the recovery tool tells that there is not enough space to recovery the system from the external drive.
    My old system was quite full. I only had 2 GB free space left. So the size of the time machine backup should be close to the 750GB. But 697GB is just not enough. What happened to the 50GB between formatting the drive and wanting to recover from the external HDD?
    Thanks for your help.

    Erbsenroller wrote:
    When I run through the recovery process formatting the 750GB drive the drive utiliity tool
    Do you mean Disk Utility?  If so, that's not how you restore Time Machine backups.
    After erasing the HD, quit Disk Utility and select the Restore From Time Machine Backup option.
    See Time Machine - Frequently Asked Question #14 for the gory details.

  • Time Machine backup does not work after 10.7.2 update

    Hi,
    after updating to 10.7.2 time machine does not perform any backups on my time capsule (error-1). What can I do? Please help. Thanks.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
     Cheers, Tom

  • Time Machine HD does not appear in Disk Utility

    Hello,
    I used Time Machine towards the end of 2007 on an external SATA HD through USB 2.0. I would frequently turn it on and let it do its thing and shut it off. One day I attempted to use Time Machine and it did not mount on my desktop. I've been searching around trying to discover a solution to this problem without any success. The HD does not show up in Disk Utility nor does it show up in XP when it is connected to my mobo with SATA. I did manage to see it under "Disk Management" in XP but was unable to assign it a drive letter. It showed the amount of space used but other than that I haven't been able to get it to work. I have since purchased a larger HD for time machine and all I really want to do is transfer over the contents of the currently non-working HD to the new HD and then format the old one. I'm asking around to see if any of my friends have an external SATA enclosure so I can find out if it is the enclosure or the HD but in the mean time is there anything I can do in Leopard (or Windows XP) to find out if the information is on the HD or if the HD is damaged?

    I am sorry - I simply do not understand your instructions!
    I have 2 Time Capsules and have been using both.  However a few days ago they quit working.  I have had to turn off Time Machine because I am getting hourly alerts that back-up failed because there is not enough space.  It does not delete old backups to provide additional space.  I am willing to erase both to try to get them working again but I cannot figure out how to erase and setup the drives.  Hence I turned Time Machine off.
    There is nothing wrong with the MBP internal hard drive.  "Sparse bundle" is total Greek to me!  My wifi network appears to be working properly.  The internal HD is mounted in Disk Utilities and verified as working properly.  I am a long time user of Apple but I am still a novice (Level 1)!
    Perhaps I should start a new thread.

  • Photos gone and Time Machine Backup does not work.

    I did a rebuild of my thumbnails at iPhoto's suggestion, then left the room because it took too long. When I came back all the photos and albums etc were gone, not exclamation points but missing.
    I thought iPhoto could not find the library so I tried the option + open and chose the proper library. Still opened to an empty library. According to the library file it was 102 GB in size but oddly had no information. I did not panic because I back up ALL the time. When I tried the TimeMachine backup (each of them back to March) they also said over 100GB but when I started to transfer them it totaled only 1019 MB and now I have exclamation points and no photos. So I need help getting back the photos. TimeMachine is the ONLY backup I have. Is this an iPhoto problem or a problem with TM? In older versions of iPhoto there was a folder of folders that had all my pictures by roll number did that change in this version, because I can't find that either? FYI all photos, and library, are (were) on an external drive.
    Not gonna lie I am in a bit of a panic at this point. Any help would be greatly appreciated.
    I can clarify anything that does not make sense, I tried to keep the explanation as short as possible so people would read it!
    Thanks in advance,
    FatherTime

    Do you still have your original library that started this problem? If so use Time Machine to bring forward the last backup before the problem happened. Do not replace the current library with the backup but select the option to keep both.
    Open the recovered library and drag out the Library6.iPhoto file to the desktop and move the rest of the recovered library to the trash. Open your original library and replace the Library6.iPhoto with the file from the recovered library. See if iPhoto will open and recognize your photos now.
    If you had any imports between the time of the last backup and your current library they will not be recognized in the library but will be inside the library non the less. You can find their event folder in the Originals folder, move it to the desktop to reimport.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Time machine backup does not include everything

    My external hard drive kept dismounting so I bought a new one.  when I checked on the backup, I could not find anything from the desktop or Iphoto or Itunes.  How do I get the time machine to back up everything? 

    Theresa,
    I'm glad Eric was able to help you out. If you need TM assistance in the future I'd recommend bookmarking:
    Time Machine FAQs
    Time Machine Troubleshooting
    They could help you quite a bit in the future.

  • My time machine backup does not complete

    The error message is
    Time Machine couldn't complete the backup to "<our server name>"
    The backup disk image "Volumes/Backup/<MyComputerName mini.sparsebundle" is already in use.
    Latest successful backup: January 17, 2014
    Please help.

    On your Server (assuming it's OS X Server), turn off the Time Machine Service then turn it back on. This is what I have done in the past when this happens.

  • The time machine Icon does not does not show up in my menu bar

    The time machine icon does not appear in my menu bar. The desk top icon for the external hard drive is green. I've checked preferances and the time machine is turned on and the box is checked that has the icon appear in my menu. I've turned off the time machine and rebooted and then turned it on and rebooted again. Nothing seems to work. I'm running Mavericks and I have an Intel I5 processor.

    the box is checked that has the icon appear in my menu
    Uncheck it and check it again. Any change? If not, see below.
    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Time machine icon does not rotate and back up icon on desktop does not show during backup session.

    Time machine icon does not rotate and back up icon on desktop does not show during backup session since I installed Maverick.  Why? How do I fix it?

    That's the new look of it. No way to change it other than file a complaint with Apple. If ENOUGH people do thst they may "fix it".
    http://www.apple.com/feedback/macosx.html

  • HT3275 Time Machine backup does nothing

    Question: Is there a magic fix I can apply? or do I need to format the backup disk and make a new backup from scratch? or do I need to replace the backup disk with a new one? Or am I asking the wrong questions?
    After a mysterious freeze yesterday, followed by a shutdown and restart, Time Machine claims it is "Preparing backup ... Finishing backup" and is done very quickly. It does not spend its usual long time looking through a couple of hundred megabytes of files, nor does it do the subsequent stage of actually transferring data to the backup disk. "Entering" Time Machine seems to show it's at least a little confused: a test file created on the desktop fails to show in backups, while old files that have been moved appear on some backups, vanish on others.
    I'm not much good with log files, but they show something like this:
    12-02-29 10:54:49.260 AM com.apple.backupd: Starting standard backup
    12-02-29 10:54:49.287 AM com.apple.backupd: Backing up to: /Volumes/Jim Clarke backup/Backups.backupdb
    12-02-29 10:54:50.247 AM com.apple.backupd: 3.11 GB required (including padding), 334.62 GB available
    12-02-29 10:54:50.726 AM com.apple.backupd: Copied 29 files (153 bytes) from volume Macintosh HD.
    12-02-29 10:54:51.329 AM com.apple.backupd: Starting post-backup thinning
    12-02-29 10:54:51.330 AM com.apple.backupd: No post-back up thinning needed: no expired backups exist
    12-02-29 10:54:51.459 AM com.apple.backupd: Backup completed successfully.
    The "29 files(153 bytes)" part is always the same, except for once when it said "21 KB" instead of 153 bytes.
    I'll be very grateful for guidance. There's lots of advice on Time Machine out there, but I can't find anything relevant to this situation.
    Jim Clarke

    Time Machine uses the modification times of folders to determine whether their contents need to be scanned for changes made since the time of the last snapshot. For some reason, that criterion occasionally fails, and TM doesn’t scan folders with contents that have changed. You may be able to get backups to resume by updating the modification times of all your folders.
    Important: This procedure will change the modification times of all folders on the startup volume. It won’t affect anything that’s not a folder, and it won’t change your existing backups at all. If you have a reason to want to keep the modification times of folders as they are, STOP.
    Before proceeding, you must have a current backup of all data. Since your existing Time Machine backups may not be current, you’ll have to back up in some other way; for example, by starting a new TM backup set on another external drive. It’s a good idea to do this anyway, as you need more than one backup.
    Launch the Terminal application by entering the first few letters of its name into a Spotlight search. If that doesn’t work, then in the Finder, press the key combination shift-command-U. The application is in the folder that opens. Another way to launch Terminal (if you’re running Mac OS X 10.7 or later) is from LaunchPad: click the Utilities icon, then Terminal in the page that opens.
    Drag or copy – do not type – the following line into the Terminal window, then press return:
    sudo find / -xdev -type d -exec touch {} \;
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    The command may take several minutes to run. When a line ending in a dollar sign ($) appears below what you entered, quit Terminal.
    The next snapshot will take longer than usual, because all folders will be scanned for changes. When it’s complete, check the results to see how much data has been backed up.
    This procedure will only affect the backups of your startup volume. If you back up other source volumes with Time Machine and are having the same problem with those, you’ll need to take additional steps.

  • Time Machine backups do not migrate from iMac to MacBook Pro

    I just moved from a iMac G5 to a MacBook Pro. I love Apple's migration tool, but it seems that Time Machine backups do not migrate.
    I checked with support, and did a basic amount of searching, and it seems that I need to erase and reformat the backup drive, losing all of my backups.
    Can this be true? That's a pretty screwy backup solution.
    Is it possible to rename the backup folder from "iMac G5" to "MacBook Pro"?
    Is it possible to add a MacBook Pro backup folder to the one already there?
    Any help is appreciated.

    I'm not quite sure what you mean. It sounds like you successfully migrated, and got everything set up properly on the new Mac.
    Now you want TM to just continue backing-up the new Mac to the old Mac's backups?
    If so, then no, that's not going to work. TM keeps the backups for each Mac completely separate. This is usually an advantage, so you can back up two or Macs to the same drive without any conflicts.
    Plus, the version of OS on your new Intel laptop is very different from the one from your old PPC desktop; a whole different set of drivers, and of course code for Intel vs. PPC.
    So TM on the new Mac cannot treat the old backups as if they were from the new Mac. It must start a whole new "sequence" of backups for the new Mac. If there's room on the disk, you can leave the old backups there until you're sure you don't need them, but that presents another problem: when you want to delete them, you can do it only one at a time, via TM, using the procedure in item #12 of the Frequently Asked Questions *User Tip* at the top of this forum. That's rather tedious and time-consuming, so most folks just erase the TM drive and let it start fresh.
    If I've misunderstood, please clarify the situation.

  • "Time Machine Backups" could not be unmounted (Disk Utilities)

    Hi there,
    I am having an error message when trying to back up time machine.  Therefore I went to disk utilities and verified disk.. said it needs to be prepared.  When I try to repair time machine, i then get the following message "The disk “Time Machine Backups” could not be unmounted".  I tried again and then it says its been repaired.  so when i tried a backup of time machine i get "time machine error.  unable to complete backup. an error occurred while copying files to the backup volume"
    I have installed "Time machine buddy" and I am getting"error reading system logs"
    I have a mac osx 10.5.8. No antivirus or spotlight running that i know of.
    Any ideas?

    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode, see if external Drive can be repaired...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.

  • HT201250 Time Machine App does not start under OS X Lion

    I tried to restore an item from my back-up, however the Time Machine App does not start.
    I use the latest version of OS X Lion 10.7.5 (Build 11G63).
    I used the work around by opening my back-up volume with the finder and copied the wanted item.
    However, this is not the correct approach I think.
    Does anybody have a solution to my problem?

    Just the last addition to my question.
    The modifications of the access rights took very, very long. In the end I cancelled the process.
    Nevertheless, time machine now works correctly. As far as I can see it.
    If annybody runs into similar problems. The solution is I think just to modify the access rights on the back-up volume to read and write access for everyone.
    Probably OS X Lion added an undocumented feature to the time machine.

  • Time machine backups wont move to time capsule

    i have two mac minis, one is the mid 2010 model and the the other one is a 2006 model. i have successfuly used superduper to finally move my 500 gigs
    of time machine backups to the new time capsule. but the older 2006 model has me lost. i am tempted to go to the applestore to make them copy it
    if i follow the directions including resetting time machine the best i can get is a pop up box every hour that says the identity of the time capsule cannot
    be verified. this does not show up on the 2010 mini
    when i tell it to pick the drive theres 2 other drives that i dont even have! those are "HOME" and "NET" on "localhost" i have no idea where its getting
    those drive paths. maybe its my readynas , when i go to /Volumes, there is no home or net folders
    another problem i have with time machine is for some strange reason there is a range of backups in an old sparse bundle file and i would like to move all the backups for this computer into one main directory, instead of having to browse old time machines. but when i try to copy from one sprarse bundle to another i get an error saying that the backup files cannot be modified

    rigormortis wrote:
    if i follow the directions including resetting time machine the best i can get is a pop up box every hour that says the identity of the time capsule cannot
    be verified.
    Is that the message in #C15 of Time Machine - Troubleshooting?  If so, are you selecting Use This Disk?  If not, exactly what does it say (or post a screenshot).
    another problem i have with time machine is for some strange reason there is a range of backups in an old sparse bundle file and i would like to move all the backups for this computer into one main directory, instead of having to browse old time machines. but when i try to copy from one sprarse bundle to another i get an error saying that the backup files cannot be modified
    That's correct; you cannot merge one set of backups into another.  A set of TM backups has a complex structure, with things all linked together; you cannot alter it.  See How Time Machine works its Magic for an explanation.

Maybe you are looking for