TS1963 DMS Launch error after migration from snow leopard iMac to new Macbook Pro?

I just purchased a Macbook Pro. I used Migration assistant to transfer my files from my '06 iMac, which was running snow leopard to the Macbook and at start up now get a DMS Launch error every time... any suggestions??
The error message says check with the developer to make sure DMS Launch works on this version of OS X. You may need to reinstall the application.
I have installed all updates as it suggests, to no avail. I keep getting the error message and report pop up box each time at start up and the only way to be rid of it, is to click ok to send the report - there is no option to stop the report from coming up.
Does anyone have any suggestions on what I can do to stop the error message appearing and resolve the issue?
Thanks
Chelle

Click Command+shift+G
Type in the following, one by one- Then delete the **** out of them.
/Library/LaunchAgents/com.divx.update.agent.plist
/Library/LaunchAgents/com.divx.dms.agent.plist
/Library/LaunchAgents/com.divx.update.agent.plist
/Library/LaunchAgents/com.divx.dms.agent.plist
/Library/Application\ Support/DivX/
HOME/Library/Preferences/com.divx.*
Also search anything "DIVX" while in library. Delete the **** out of that too.

Similar Messages

Login error after migration from Snow Leopard to Lion

I went through the migration process to get all settings and data over from my MacBook (10.6.8) to my new Mac Pro (10.7.3). During the migration, I was logged into the old MacBook with my FileVault-enabled account. Migration completed successfully, but when I tried to log into the new Mac Pro, I got this error:
"You are unable to log in to the FileVault user account "user1" at this time. Log in to the account failed because an error occurred." [OK]
When I typed a password I knew was incorrect, the login box would do the familiar shaking. When I typed the correct password, I got the behavior above.
I was able to log in to the new Mac Pro as a different user (user2), even though user2 also had FileVault enabled on the old system.
When logged in as user2 on the new system, I was able to escalate privileges by authenticating as user1, so I knew the password for user1 was working. I gave user2 admin privileges and saw that user1's data had been copied over, but not as a sparsebundle - presumably because user1 was logged in at the time of migration.
To fix the login problem, I did the following:
1) Logged in as user2 on both source and target system, then escalated privs to give user2 admin rights.
2) Copied /Users/user1/user1.sparsebundle from source to target system:
     - On target system, in System Preferences -> Sharing, enabled Remote Login for user2
     - On source system, opened Terminal window and typed:
     $ sudo -s
     > [password for user2]
     # cd /Users/user1
     # scp -rp user1.sparsebundle user2@IP_address:
    (where IP address is the actual IP address of the target system)
     > [password for user2]
3) Moved aside the unencrypted files in user2's home directory:
     - On target system, logged in as user2, in Terminal:
     $ sudo -s
     > [password for user2]
     # chown -R user1 ~/user1.sparsebundle
     # mkdir /tmp/user1
     # chown user1 /tmp/user1
     # cd /Users/user1
     # mv * /tmp/user1
     # mv .[a-zA-Z]* /tmp/user1
4) Moved the user1.sparsebundle into place (in same Terminal window on target system):
     # chown -R user1 ~/user1.sparsebundle
     # mv ~/user1.sparsebundle /Users/user1
5) Logged out of user2 account and logged back in as user1
6) Securely deleted the unencrypted files for user1 (in Terminal window as user1):
     $ srm -rf /tmp/user1
Many thanks to @neirbowj for the analysis of why the migration failed!

Go get a powered USB hub and try that. Lion may have issued a fix for devices drawing too much power, by cutting them off.

Mail "unexpectedly quits" after migration from snow leopard to new iMac running Mountain Lion

Mail "unexpectedly quits" after migration from snow leopard time machine files to new iMac running Mountain Lion. I can run connection doctor OK. But the activity window is blank. If you try to open message viewer window then mail program crashes. Would really like to get my old emails back as the old imac is totally dead. Thanks for any help.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Iphoto wont start after migration from snow leopard to mountain lion

Hello everyone hope you can help me, I've migrate from Snow Leopard to Mountain Lion and my IPhoto (8.1.2) won't start, I cant reinstall from app store because it came with the copy of Snow Leopard already instaled on my Imac...And I cant find the original Disc, so anyone can help ? felling desperate...

You should be able to Software Update and that will bring your iPhoto up to date.
iPhoto was 9.2.3 at 10.6.8, so I don't know why yours was stuck at 8.1.2
However you can stick the #2 10.6 disk into your machine and should be able to run the bundled app installer.
If that doesn't work there is Pacifist from CharlesSoft that you can extract iPhoto and replace your corrupted one, then run Software Update to bring it current.
Once you have replaced iPhoto, rebuild the database
https://support.apple.com/kb/HT2638
If your still having problems, perhaps a user account or drive permissions issue
..Step by Step to fix your Mac

Can i install snow leopard on my new macbook pro

I'm looking at a new laptop but I understand Adobe CS4 won't work on Lion, so I'd rather install Snow Leopard on the new macbook. Is this possible?

Difficult, and even reported "success" is likely not consistent enough for your *need* for Adobe CS4.
You can try for a unit off the refurbished list (Apple.com > Store, bottom of the left hand margin is the link). Units from pre-July and last year can be found, and come with warranties just like brand new.

Do i need to install snow leopard on my new macbook pro?

i picked up a new macbook pro and it came with snow leopard. i don't know what the snow leopard will enhance and if i should even install the program.

Your MacBookPro comes with Snow Leopard pre installed. It's not a program, it's an operating system. Mac OS X - Snow Leopard.
You might benefit from viewing these videos.
http://www.apple.com/findouthow/mac/

ITunes, iPhoto and system clock crash after migrating from Snow Leopard

Hello everyone,
I had MacBook Pro with Snow Leopard but had to migrate to older one with 10.5.8 today.
After 4 hours it finished and everything seems fine except 3 things:
1. iTunes crashes on each launch attempt. I even followed an article to uninstall it, got a new one from apple.com but I still have the same issue.
2. iPhoto opens with success and shows folders overview, but when I click to enlarge a photo I get a blank screen. After about 2 minutes the program quits unexpectedly.
3. System clock behaves really strange. It seems to ignore time zone settings completely. I select Melbourne, Australia and quit Sys preferences but when I get there back I still have GMT time. Setting manually gives me nothing - time of email is still GMT.
Anyone have seen similar problems after migrating? My primary guess is that this issues are caused by migrating to older Mac OS version, but maybe it's not the point. Anyway, would be great to have this fixed. Without iPhoto, iTunes and proper times in e-mail inbox my Mac is pretty useless...

I installed this update, restarted but nothing helped. By permissions - what do you exactly mean, how could they change or what could be broken?
I also noticed that what is broken as well are the PYM Player and Quick Time. When I open a movie, I got the sound but no video output at all. It is similar to iPhoto where I see the miniatures but normal size viewing goes blank.
Does anyone has a clue what can be broken that causes such problems?
My Mac is now really just an e-mailing and surfing machine...

Migrating from Snow Leopard on an old Macbook to Mountain Lion on a new Macbook

I've finally taken the plunge and bought a new mbp running Mountain Lion. My older 2009 model is running Snow Leopard and I have some important software on it that I want to transfer across to my new machine. However, upon setting up the new machine, I missed to opportunity to use Setup Assistant during the initial booting up sequence as I wasn't sure what to do, so opted for what I assumed to be the safest setup.
Is there anyway that I can still transfer the files across with all the settings, and perhaps even choosing to omit a few.

It was all quite painless, as you said, and i'm now glad i'm doing fresh installs for everything.
Ableton was as simple as logging into my account (first time in over 2 years) and there just so happened to be a newer version of the software waiting for me (Version 8.4, when I was running before Version 8.2). I'd downloaded it, installed it and authorised it within about 10 minutes. Guess it pays to log in once in a while. 4 other major apps have also been problem free.
I've maxed out the ram to 16Gb now and replaced the factory HDD with an 512Gb SSD after cloning the original drive in the new machine using SuperDuper and a USB to SATA lead that came with the drive I bought and i'm seeing boot times of 12 seconds, which is staggering really when it was close to a minute with the old drive in the fresh machine.
Serato Scratch Live processes 8 files at once now, compared to 2 in my 2009 mbp13 (with 256Gb SSD and 8Gb ram). 14.5k 320kbs tunes processed in 4hrs 3mins is very impressive. It reminded me of the missile strikes sequence NORAD ran in Wargames, watching the processes moving across screen.
I'm one happy customer now anyway. Thanks to you both for your help.

Can I install Mac OS X 10.6 (Snow Leopard) on my new MacBook Pro?

Hi all, I'm user of Mac since lot of time and I`ve got a question. I have bought a Macbook Pro on September 2011 and it cames with Lion and no installation disc. Can I downgrade this Macbook Pro with Lion preinstalled to Snow Leopard with SL Retail disc?

Not with a retail disc — it doesn't contain a recent enough version of Snow Leopard to boot the machine. You'll need to obtain duplicates from Apple of the discs that would have been shipped with your machine before the release of Lion. Call Customer Relations at the number below and ask to have them sent to you for a small fee.
1-800-767-2775 (USA only. Outside the USA, call AppleCare)

Can I run Tiger and Snow leopard on a new macbook pro 15"

Hi
I have a Macbook running Tiger, soon to be replaced (I hope) by a
15" Macbook Pro Sno Leopard. Can I partition the drive on the MBP to run
Tiger also, as I have Adobe Creative Suite 2 and can't afford to upgrade that too. And I really don't want to run to computers.
Thanks

Welcome to Apple Discussions!
Snow Leopard will run CS2 with some limitations.
http://snowleopard.wikidot.com/start
Either find a Mac older than October 26, 2007 you can use until you can bring all your software to Snow Leopard compatibility from these sites*:
http://www.macmaps.com/usedrefurbished.html
Or find an alternative application for the functions you need from the first link that is Snow Leopard compatible if you can use that.
- * Links to my pages may give me compensation.

Can i install snow leopard on my new macbook pro which came loaded with Lion?

My new MBP came loaded with Lion. Can i install S.L. on it?

Don't install a version of Mac OS X earlier than what came with your Mac

Please help, after migrating to snow leopard Server my VPN is not working

Hi,
After migrated to Snow Leopard Server, my VPN settings are not working, My users not able to connect to VPN.
Please find below log. Please let me know the solution for it.
2010-01-05 13:19:32 IST Incoming call... Address given to client = 192.168.1.72
Tue Jan 5 13:19:33 2010 : Directory Services Authentication plugin initialized
Tue Jan 5 13:19:33 2010 : Directory Services Authorization plugin initialized
Tue Jan 5 13:19:33 2010 : PPTP incoming call in progress from '95.222.205.164'...
Tue Jan 5 13:19:33 2010 : PPTP connection established.
Tue Jan 5 13:19:33 2010 : using link 0
Tue Jan 5 13:19:33 2010 : Using interface ppp0
Tue Jan 5 13:19:33 2010 : Connect: ppp0 <--> socket[34:17]
Tue Jan 5 13:19:33 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x2794ebf2> <pcomp> <accomp>]
Tue Jan 5 13:19:34 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x29205274> <pcomp> <accomp>]
Tue Jan 5 13:19:34 2010 : lcp_reqci: returning CONFACK.
Tue Jan 5 13:19:34 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x29205274> <pcomp> <accomp>]
Tue Jan 5 13:19:36 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x2794ebf2> <pcomp> <accomp>]
Tue Jan 5 13:19:36 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x2794ebf2> <pcomp> <accomp>]
Tue Jan 5 13:19:36 2010 : sent [LCP EchoReq id=0x0 magic=0x2794ebf2]
Tue Jan 5 13:19:36 2010 : sent [CHAP Challenge id=0x8d <620015595e4967664c1310241b4b3254>, name = "nova.thecoverstory.com"]
Tue Jan 5 13:19:36 2010 : rcvd [LCP EchoReq id=0x0 magic=0x29205274]
Tue Jan 5 13:19:36 2010 : sent [LCP EchoRep id=0x0 magic=0x2794ebf2]
Tue Jan 5 13:19:36 2010 : rcvd [LCP EchoRep id=0x0 magic=0x29205274]
Tue Jan 5 13:19:39 2010 : sent [CHAP Challenge id=0x8d <620015595e4967664c1310241b4b3254>, name = "nova.thecoverstory.com"]
Tue Jan 5 13:19:40 2010 : rcvd [CHAP Response id=0x8d <c68742dc9457be5a61e444f00f53371d000000000000000044c6f89fa49ed8bf4c17a2861a2cfd 04ae1e6b9199527f9f00>, name = "jenny"]
Tue Jan 5 13:19:40 2010 : DSAuth plugin: Error -25300 while retrieving key agent password from the system keychain.
Tue Jan 5 13:19:40 2010 : DSAuth plugin: Could not retrieve key agent account information.
Tue Jan 5 13:19:40 2010 : sent [CHAP Success id=0x8d "S=B503F226B4DE4105A4711C0EA2E7C21B1A9A935D M=Access granted"]
Tue Jan 5 13:19:40 2010 : CHAP peer authentication succeeded for jenny
Tue Jan 5 13:19:40 2010 : DSAccessControl plugin: User 'jenny' authorized for access
Tue Jan 5 13:19:40 2010 : MPPE required, but keys are not available. Possible plugin problem?
Tue Jan 5 13:19:40 2010 : sent [LCP TermReq id=0x2 "MPPE required but not available"]
Tue Jan 5 13:19:40 2010 : Connection terminated.
Tue Jan 5 13:19:40 2010 : Connect time 0.2 minutes.
Tue Jan 5 13:19:40 2010 : Sent 0 bytes, received 0 bytes.
Tue Jan 5 13:19:40 2010 : PPTP disconnecting...
Tue Jan 5 13:19:40 2010 : PPTP disconnected
2010-01-05 13:19:40 IST --> Client with address = 192.168.1.72 has hungup
Thanks,
Gulab Pasha

Great !! save my trouble too
thanks a lot for the tip.

Complications migrating from Snow Leopard Server to Mountain Lion Server.

I'm migrating from Snow Leopard Server to Mountain Lion Server. The article "OS X Server: Upgrade and migration" (http://support.apple.com/kb/HT5381) says
"Make sure that any DNS or DHCP servers on which your server depends remain running during the upgrade"
This advice is reinforced by the details of the article "OS X Server: Steps to take before upgrading or migrating the Open Directory database" (http://support.apple.com/kb/HT5300).
As the server I'm migrating from provides these services it will need to be running during the migration process. This would seem to limit my options to doing the migration from a Time Machine backup (or, making a seperate clone of the server's drive and connecting it externally to the new box)
My main concern is the seemingly inevitable clash that is going to occur on the network as the new server takes on the roles of the old one - while it is still running.
What are my options here ?
This is my second attempt as on my first try I did the migration from the TM backup with the network down - and none of my local network users or their home directories were migrated, although the settings for the mount points were, but there were no actual directories where they pointed to!
Clear directions on how to procede would be VERY MUCH appreciated
Thank you.

Moving from Snow Leopard to Mountain Lion means first installing the client (non-Server) version of Mountain Lion and then install Server.app this means that for at least part of the process you will not be running DNS, DHCP or Open Directory.
If you are going to end up using the same DNS name and IP address after the change then an approach you could follow would be as follows.
Destroy any Open Directory replicas
Archive your Open Directory Master (to make a backup)
Note down your DNS records in case they get messed up
Export via Workgroup Manager your users, and groups (you might not need this but better safe than sorry), make sure you do not include the diradmin account
Keep a full back of the server (you should always have backups)
Note down your DHCP server settings in case they get messed up
Note down any other service settings
Install Mountain Lion
Install Server.app
Install Workgroup Manager (extra free download)
Run Server.app
Make sure settings for services are as much as possible the same as before
If your lucky that may be all you need to do, otherwise...
Restore Open Directory archive, if your lucky that will be all you need to do, otherwise...
Make new Open Directory Master
Run Workgroup Manager
Import users and groups you previously exported
You will then have to set passwords for each user as these are not preserved via Workgroup Manager export
When I did this, I was also being forced to change all my IP addresses so I had no choice but to use Workgroup Manager to export and import accounts.

Migrating from Snow Leopard to Mountain Lion Server

Hi all. I kinda drop in and out of this forum, mostly when I've got a puzzler that I can't figure out. My journey from Snow Leopard to Mountain Lion was a little slow. I tried to make the transition from Snow Leopard to Lion and failed, but this time I made it and I thought I'd share a little scratchpad post I wrote to document what I did. Mostly this is about adding back a few things that I really need. Here's the list of stuff that I added back:
Firewall management (IceFloor)
MySQL
Webmail, email filtering rules and email aliases (RoundCube)
"Group" emails (short, multi-recipient email exploders)
Mailing lists (Mailman)
I also dramatically improved reliability by adding a lot of memory, and doing nightly-restarts of the machine.
Here's a link to the post
http://www.haven2.com/index.php/archives/migrating-from-snow-leopard-server-to-o sx-server-mountain-lion
I'm happy to report that the new server has been running for a month or so and all seems fine. Whew. A long journey. Thanks to all of you who posted things that helped me along the way. Hopefully this will return the favor.

Moving from Snow Leopard to Mountain Lion means first installing the client (non-Server) version of Mountain Lion and then install Server.app this means that for at least part of the process you will not be running DNS, DHCP or Open Directory.
If you are going to end up using the same DNS name and IP address after the change then an approach you could follow would be as follows.
Destroy any Open Directory replicas
Archive your Open Directory Master (to make a backup)
Note down your DNS records in case they get messed up
Export via Workgroup Manager your users, and groups (you might not need this but better safe than sorry), make sure you do not include the diradmin account
Keep a full back of the server (you should always have backups)
Note down your DHCP server settings in case they get messed up
Note down any other service settings
Install Mountain Lion
Install Server.app
Install Workgroup Manager (extra free download)
Run Server.app
Make sure settings for services are as much as possible the same as before
If your lucky that may be all you need to do, otherwise...
Restore Open Directory archive, if your lucky that will be all you need to do, otherwise...
Make new Open Directory Master
Run Workgroup Manager
Import users and groups you previously exported
You will then have to set passwords for each user as these are not preserved via Workgroup Manager export
When I did this, I was also being forced to change all my IP addresses so I had no choice but to use Workgroup Manager to export and import accounts.

I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this?

If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install.

TS1963 DMS Launch error after migration from snow leopard iMac to new Macbook Pro?

Similar Messages

Maybe you are looking for