TS1967 what to do if you with the "itunse conect" in the last stage of update

what to do if you with the "itunse conect" in the last stage of update?

Try posting in your native language, the above makes no sense.

Similar Messages

Can you make Siri say your name each time she says "What can I help you with?"

Can you make Siri say your name each time she says "What can I help you with?" I have done the "call me (my name) and linked her to my contacts but she rarely uses my name unless I ask "who am I?" Can she say "What can I help you with (my name)"

So is the only reason for her to know your name to have her know you contacts info?
Does she ever greet you with your name?

How to make Siri say "What can I help you with"

I just got the iPhone 5 (my very first iPhone as well), I hold the home button to activate Siri but she won't say anything and it only shows the text of "What can I help you with?" at the bottom. How can I make her talk? I know that I have it activated for speech because after that when I say a command she'll respond when it stops loading. Also, I added my name as a contact but I haven't had her address me once by it. Does anyone know how to fix these two things? Thank you!

So is the only reason for her to know your name to have her know you contacts info?
Does she ever greet you with your name?

Siri not saying what can i help you with

I just received m iphone 5.
Siri initially greeted me with the message "What can I help you with" verbally. That has suddenly stopped. Siri works fine for all other requests. It seems odd that it just stopped.
I've done a reset and restore backup and that did not change anything. I have not done a full system restore yet.
Any suggestions?

Thanks, I'm betting that's it. I tried it fresh out of the box, then activated the phone, updated the OS and reinstalled my data.
Thanks for the reply!

The "What can I help you with" Box pops up when plugging in a line in cord

I have the retina ipad 4 and when I plug in headphones no problems, but if I plug in a cord that you would use for external speaker sound into the headphone jack the What can I help you box pops up like I pushed the Home button to give it a command. Not sure why it would do that , the ipad funtions fine, just thought I would this out there.
Thanks, Shawn

i figured this would be a no amswer one

IPHONE popping up with "voiceover" or "what can I help you with".

My 2 month old Iphone 5 keeps on popping up with "ask me a question" (when siri is on) and "voiceover" (when siri is off). I can't listen to music without it popping up about every 20-30 seconds. (it is so distrcting) Can someone help? I am in Bermuda with no access to an apple store. I trired to re-set all my settings and also made sure voice over was turned off.
Thanks.
Jeff

Hey there Jeffrey,
It sounds like you are unable to use the phone without either Siri, or Voice Over coming on constantly. Sounds like something funny may be going on with the Home button on the phone, which you would normally hold to enable either of these 2 features. You should use these steps to help determine the issue, whether it be software or hardware:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Try turning iPhone off and then on again. If the iPhone will not restart, try resetting it.
If the issue is still happening, try to restore the iPhone.
Seek service is the issue is still occurring.
Thank you for using Apple Support Communities.
Take care,
Sterling

What does a black screen with an apple symbol in the middle mean?

For 2 days my ipad has had a black screen with an apple symbol in the middle. I tried to reset but nothing happened. I can't even get it to power off.

Try and force your iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Can you please tell me in detail how to connect a CFP-1808 and a CFP-RLY-425 with a ethernet conection to the labview please

Hi,
I am doing a research in creating a controlled environment, and i require using labview and NI equipment to control the environment. I am currently using a CFP-1808 as a bank, and using a relay module to connect it to the labview software.
Can you give me detailed information on how i will be able to do that.
regards,
Robert

Hi Robert,
Have you had an opportunity to take a look at the cFP-1808 Quick Start Guide? And the Operating Instructions for the cFP-RLY-425? Also the Compact FieldPoint FAQ is an excellent resource.
Hopefully those can get you on your way,
Fred V -- Product Support Engineer -- LabVIEW R&D -- National Instruments

RAW files from Fujifilm X10, why have I lost the ability to import after last RAW file update?

When I first installed iPhoto '11, it would not accept imports of RAW files from Fujifilm X10, then when doing an RAW file compatibility update in around April 2013, I could then import X10's RAW files, but when I did the latest RAW file combatibility update about a week ago, I now seem to have lost this ability, WHY? How can I restore this feature?

For what I understand:
The problem is that the update applies to the IOS not the software itself (iPhoto or Aperture) so rolling back is almost impossible.
Meanwhile the most effective way is to send feedback requesting the update:
http://www.apple.com/feedback/iphoto.html

Bartab doesnt work with 6. I want to know what version it is compatible with, 3,4,5, but the site doesnt bother to show valuable information. Firefox gets worse and worse every year. I wonder if google is paying Firefox to be so bad?

A bunch of cable installers run Firefox now.
This isn't as much about bartab as about Firefox.
At one time Firefox wanted to be a great browser, it seems those days are gone.
Did you not realize people are going to revert to previous versions to be able to use preferred addons?
There is something very wrong with the direction Firefox is going.

@dmcritchie max_concurrent_tabs is a solution to a different problem than the one BarTab solves. It just doesn't do what BarTab does, nowhere near as good.
The beauty of BarTab is that it works around time since the tab was viewed, *not* the number of tabs. If I don't look at a tab for an hour, I don't need it loaded, without regard to how how many tabs are open.
@Xoferif My solution, unfortunately, was to revert to Firefox 3.6.20.

For those of you with a Windows computer and the iOS device is not syncing or showing up in iTunes. here is a known solution that has been working for tech support!

I know this seems to be an emerging issue ever since the update to iTunes 11.1.4, some iPhones or other iOS devices are not showing up in iTunes or syncing. I'm not sure if Apple really knowns of this issue, but tech support has a (mostly) sure fire way of resolcing this issue. It's only for Windows computers though.
Go to the article http://support.apple.com/kb/ts1538 and follow the Section 5 Verify Apple Mobile Device USB driver is installed. When you clik on that section, go to your version of Windows (it seems to be happening mostly across Windows 8) . And then to the section: If Apple iPod, Aple iPhone, or Apple iPad is listed.
The gist of what you need to do:
Windows 8 (since it seems to be the most affected) move your cursor to the upper ight corner of your screen) and click on the Magnifying glass. Type in devmgmt.msc and this should bring up the Device Manager. Onc eyou are in the device manager, look for the "Portable device" or "Universial Serial bus Controller" list, and you should see the "Apple iPhone/iPad/iPod" listed. Onc eyou see it, right click it, choose "Update software driver." Now, IT WILL SAY THE DRIVER IS UPDATED. I CANNOT STRESS THIS ENOUGH. Select "Browse my computer for driver software." Onc eyou choose that, select "Let me pick from a lsit of drivers on my computer." You should see the option "Have Disk." Choose that. Again, I KNOW you do not have a physical disk, but the file we need is already on your computer. After Hard Disk, choose Browse again. Follow this file path to the file we need: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.. In the Driver's folder, you should see the "usbaaple" or "usbappl64" (if you have the 64 bit for Windows). Double click on that file, and hit OK. The file should install, and once it's finished check your iTunes!!! You may want to unplug your device and plug it back it before doing all of this. I REALLY hope this works for you all as well!

How can I change my file extension from m4p to something else? I have had no success being able to play or burn my purchased music. I keep getting error 2122. If I can change the format I should be able to move it to another player or at least burn it in Nero. Thanks.
Angie

HT201407 I have problem with My IPhone after updating I was asked to enter password etc then asked to agree the terms and conditions which I did but nothing happens it stays on this page can someone help how to complete the last stage of updating?

I updated my I Phone4 with the latest version iOS7 after updating I was asked to enter I tune password etc and then was asked to accept the terms and conditions which I did......but nothing happens it stays on the same unable to complete the final stage.....my phone does not work I am stuffed can someone help.....cannot get thru to Apple I tried contacting them

Hi Rajvidya Das,
Do the following, then try again:
1.     Close all open apps: Double click on the Home key and then swipe up on each of the thumbnails that appear above the open app icons
2.     Sign out of the iTunes store: Settings>iTunes & App Store, click on your Apple/iTunes ID, then sign out
3.     Check Settings>Safari, and make sure that "Block Cookies" is not set to "Always". If it is, change it to either of the other two options
4.     Make sure you do not have Restrictions turned on. If they are turned on, make sure that access is allowed for Safari, iTunes Store, Installing Apps, and Deleting Apps
5.     Reset your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears (up to 30 seconds). Once the Home screen redisplays sign back into iTunes and try again
Cheers,
GB

What's your opinion on the search function on the NI website?

Hi all NI web goers:
I give 1.5 of 5 stars to NI's search function. Most of the times I got very frustrated when searhing NI's website. It returns a lot of entries for my search, but either none of them are relevant, or there are about 10 duplicate links to the same page, and multiply that by the # of unique links you get, well, you get the idea.
So, what's your opinion on the search function offered by the NI website?
-Joe

Not sure what this has to do with LabVIEW. I suspect the Feedback on NI Discussion Forums might be as good as place as any. This has been brought up before:
http://forums.ni.com/ni/board/message?board.id=130&message.id=3587
http://forums.ni.com/ni/board/message?board.id=130&message.id=3086
http://forums.ni.com/ni/board/message?board.id=130&message.id=3142
http://forums.ni.com/ni/board/message?board.id=BreakPoint&message.id=3966 (thread I started along the same lines)

TS3694 My iphone turned off earlier for no apparent reason. I have connected it to a USB and the screen lights up showing a USB with an arrow pointing to the iTunes logo. As it apear in iTunes, my only option is to reset my iphone. It wont reset b/c it tu

My iPhone turned off for no reason and wont turn back on but it will show me the apple logo then turn off again. I have connected it to the computer and attempted to reset it but it turns off before it can reset.

Ok. I have doen some research and I have some things for you to try.
First, what version iPhone do you have?
Second, Try holding the home+sleep button for ten seconds and you should see the apple logo come up.
Are you using your iPhone with a Mac or PC?
Have you upgraded to iTunes 11?

When I connect with my computer, I see the I-phone in I-tunes, but not in Windows Explorer?

I connect my I-phone with my computer. In I-tunes the phone is there, but not s a removable device in Windows Explorer. It should be recognised I assume. Who knows the answer? Thanks in advance.
Arend from Holland

So what sync settings do you currently have enabled from under the iPod's Summary and Music tabs? Any error messages when you try to sync?
To be sure, reset sync warnings. To do this, right->click the iPod under Devices and choose Reset Warnings. Then resync your iPod.
B-rock

TS1967 what to do if you with the "itunse conect" in the last stage of update

Similar Messages

Maybe you are looking for