TS20000139 Enter and Send message

Hi
We are using Trip request workflow WS20000040. and when the approver rejects the trip request then the task TS20000139 executes and pops up a window where approver writes his comments , receiver id (employee) and  will send it to the employee. The process works fine but our requirement is to write the receiver id by default (i.e.by workflow itself) as Workflow Initiator.i.e.No need for manager to search his employee's  user id and enter in the receiver field. How can we achieve this ?
Thanks
Shrinivas

Please don't ask new questions in an existing thread like this, for 2 reasons:
1) you can not award points
2) you are messing up the archive of answered questions
The recipient list is a multiline container element, so sending to more than one person is supported.
Message was edited by Kjetil Kilhavn:
Since I don't have access to a SAP system now I can't confirm that the recipient list is a multiline container element in this particular task, but SOFM.Send method supports multiple recipients unless I am getting completely senile.

Similar Messages

  • Enter and send message from portal

    Hi
    I am able to allow user to enter rejection reasons using task TS20000139 (Enter and Send Message) when the user clicks the Reject button in SAP Gui. However when the user clicks Reject from the portal, the Enter and Send Message does not appear immediately. Instead it appears as a new task in the portal. Is there a way for the Enter and Send Message to appear immediately in the portal when the user clicks on the Reject button ?

    Hi Ronaldo,
    Also, as Jocelyn says...
    <i>Hi folks,
    Actually advance with dialog will work under some specific scenarios from the UWL.
    1. If you are launching work items using WinGUI.
    2. If you are launching work items using SAPGUI for HTML and are on a high enough release .
    In other words, it depends on the launch mechanism - not the UWL.</i>
    Try checking the launch mechanisms.
    Regards
    <i><b>Raja Sekhar</b></i>

  • After Clicking Rejection(Enter and send message from portal )

    Hi
    I am able to allow user to enter rejection reasons using task TS20000139 (Enter and Send Message) when the user clicks the Reject button in SAP Gui. However when the user clicks Reject from the portal, the Enter and Send Message does not appear immediately. Instead it appears as a new task in the portal. Is there a way for the Enter and Send Message to appear immediately in the portal when the user clicks on the Reject button or any other task is there for Enter and Send Message supporting SAP portal...
    please let me know the solutions...
    Thanks
    ram

    Ram,
    the Advanced with Dialog works fine only in certain scenarios, as Jocelyn mentioned in the following thread. pl go thru' this.
    Extended Notification-Submethods and advance with dialog not supported...
    COming to your requirement, if you want to provide a box for the user to enter Rejection reason on the portal side, you can use the User decision Actiion Handlers as given in the below link. It is very simple and fast implementaion.
    I have done this recently, so if you need more details, let me know.
    But go thru' the following help.sap link on ACtion Handlers.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/7a/df014b037141ca9afc6433ed42b519/frameset.htm
    Hope this helps.
    Regards,
    venu

  • Reject Travel Request (Enter and Send Msg Error)

    Hi Experts.
    I Copied standard workflow for approve travel request, and add a decision control to know whether is national or not. It seems that runs fine, but when the user choose to reject the request, the screen of "Enter and Send Msg seems to open" but in a blink the screen disappear. I checked agents, standar task 20000139 but i can't find any error.
    Any Suggestions,
    Thanks a lot,
    Steve.

    What is the Status of the Workflow. Is that particular task TS20000139 got executed?
    If it gets completed without any user action then this activity step might have some condition that is activated in the condition Tab of activity step.
    Thanks
    Arghadip

  • ı wanna delete my purcahe but it did hide and where is the hidding ı wanna delete my purchase please because I am not looking a few purchase (dowloaded at the apple store) help me and send message to my email thank you have good work.

    ı wanna delete my purchase but it did hide and where is the hidding ı wanna delete my purchase please because I am not looking a few purchase (dowloaded at the apple store) help me and send message to my email thank you have good work.

    what?

  • Way to receive and send Messages.......................

    Hello All!
    Is there a Way to receive and send Messages with attachments From Forms 6i?
    Could you give us one actual example i really cant understand this how to do this through forms?
    Arona

    What kind of messages? If you are referring to email, then if you search this forum, you will find many threads. Here are a few:
    Sending email with a pdf attachment
    email attachment
    Re: CLIENT_OLE2 and Outlook to send an email..

  • Why mine iphone 5c cannot normal receive message  and send message to another phone?   I also cannot receive any message form Digi Centre~  I am form malaysia~

    Why mine iphone 5c cannot normal receive message  and send message to another phone?   I also cannot receive any message form Digi Centre~  I am form malaysia~

    Sorry, forgot to add this and I can't find the edit button.
    -I am using build: 9A406
    -One funny thing I want to add too: when I put the iPhone in the Apple dock and connect it with my PC, I open iTunes and select my phone. There you can see the build, software version,.. But after telephonenumber it says N/A: not applicable.. Something I only just noticed. I'm pretty sure my number was displayed back in Nov. when I first got my iPhone 4S.
    And the very last thing: Most of the time I have a very good signal, 4 out of 5 bars. It is only rarely that I have only 1 or 0 bars.

  • I'm unable to use Fiverr with Firefox. Last year I was able to order Fiverr gigs and send messages inside Fiverr but for the last 3 weeks I've been unable to.

    I'm unable to use Fiverr.com with Firefox. Last year I was able to order Fiverr gigs and send messages but for the last 3 weeks I've been unable to do either. I can login to Fiverr but I'm unable to use the service.
    I'm using Windows 7.

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • Can't hit enter to send message

    Hi, I am using windows 8.1, and skype install from microsoft store.Recently (like in a week), I found out that I can't hit enter to send my message. Also, there is not any buttom to send. Thus, I can't send out any IM through the skype. However, I can receive message, video/voice call.  I tried to reinstall it, restart my computer, but it didn't work out. Can anyone help me with that? Thank youDK

    I have the same problem. Just bought the Microsoft Surface RT and it came with Skype already. At first, when I tried to sign in, it was giving me an error, so I had to uninstall it, and install it again. When I finally made the app work, I tried sending a message, and the ENTER button did not work. There is no settings or anything that lets you send the message. I was starting to hate my new tablet and got frustrated because of this, but it seems like it's only not working on Skype.

  • I bought a used i pod 4 for my daughter and it does not have the message icon on it: how can i put the icon on the i pod and get it receive and send messages

    I bought a used i pod 4 for my daughter and it does not have the message icon on it ( not even in settings) how can I get the message icon on it so it can receive and send messages

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Bpm,COLLECT AND SEND MESSAGES

    Hi all,
    My scenario is as follows:
    Get user ids from SAP(receive step) ->
    Make syncronous call to get Roles from SAP(send sync) ->
    Append response message to message list ->
    Make syncronous call to get roles from SRM(send sync) ->
    Append response message to message list(both are same MT) ->
    Transform message list to new message ->
    Send message with to external system
    The problem is that only the roles from the first message are sent to the external system. It did not map and send the second message. What do you have to do to get both messages sent in the same send step? Is it possible?
    I set the message occurs for the source to 0...unbounded and the message occurance for the target to 1 per the pattern for both the message map and the message interface.
    Regards,
    chris

    Sorry
    Wrong place to post this question
    regards.

  • See all room and send message

    hello, first sorry for my english.
    i' m developing a multyplayer games whith multi-rooms
    application.onAppStart = function(){
    application.player_so = SharedObject.get("player_so",
    false);
    application.nextId = 0;
    application.onConnect = function(newClient,name){
    application.nextId++
    newClient.id = application.nextId
    application.player_so.setPrope rty(newClient.name, name);
    application.acceptConnection(newClient);
    newClient.sendMessage = function(testo) { ;
    for(var c=0; c<application.clients.length;c++) { ; ;
    application.clients[c].call("sendMessage", null,"hello i'm:
    "+name);
    ok.. i have 10 rooms .. then the client
    var client_nc:NetConnection= new NetConnection();
    client_nc.connect("rtmp:/myapplication/room1","ciao");
    // i create 10 room
    client_nc.onStatus = function(info) {
    client_nc.sendMessage = function(msg) {
    dbg_txt.text +="Debug: "+ msg+"\n";
    dbg_txt.scroll += 1;
    dbg_txt.scroll = dbg_txt.maxscroll;
    mybutton.onRelease= function(){
    _root.client_nc.call("sendMessage", null,
    _root.testo_txt.text );
    how can i send a message for all client?
    if i send a message this message is received only clients of
    a determinate room, i want send message for client of all
    room

    As I said the problem is in delta pull mechanism. Talk to your Basis or EP guy and check the following link
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/eb/101fa0a53244deb955f6f91929e400/content.htm
    Regards, IA

  • HT4061 How do you change your phone number than is in your iPad and replace it with right one to receive and send messages?

    How do you change your phone number in your iPad messages and replace it with another number. In order to send and receive messages to the correct phone number?

    It's best to use an email address on the iPad.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • Want to find a fitness GPS app that will allow you to receive and send messages and calls while running the app

    I love my blackberry 8900 and have found some cool fitness gps apps that track my distance, etc.  The problem I have is I can't figure out how to access incoming messages or how to send a text message while keeping the app active.  There are pause buttons on the ones I've used, but if I try to get out of the app screen it will log me off the workout completely.  Now granted, I don't do a lot of texting during my workouts (cycling) but still - would be nice to be able to pause it and maybe send something liek "home in a few mins " then continue on with the same workout.

    I figured it out - I programmed my left side button to go straight to my IM program.  I can send and receive messages and go back to my workout without stopping it

  • Bridge NOT able to connect to one server and send message

    I have configure JMS bridge between MQ queue and a distributed queue ( which is targeting JMS servers in a cluster ).
    Bridge is able to connect to all servers and transfer messages, except one.
    Messages arriving on the MQ queue are delivered by the JMS bridge to all the JMS servers except one
    We turned on debug on MessagingBridge on affected server and got the error msg in the attached log.
    Following is the exception strace:
    <Jan 21, 2010 7:22:19 PM EST> <Warning> <MessagingBridge> <BEA-200026> <Bridge "TsysTIPSBridge" encountered some problems in one of
    its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The excepti
    on caught was java.lang.Exception: javax.resource.ResourceException: Error sending message
    at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1470)
    at weblogic.jms.adapter.JMSBaseConnection.send(JMSBaseConnection.java:714)
    at weblogic.jms.adapter.JMSConnectionHandle.send(JMSConnectionHandle.java:144)
    at weblogic.jms.bridge.internal.MessagingBridge.onMessageInternal(MessagingBridge.java:1325)
    at weblogic.jms.bridge.internal.MessagingBridge.onMessage(MessagingBridge.java:1251)
    at weblogic.jms.adapter.JMSBaseConnection$29.run(JMSBaseConnection.java:2070)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
    at weblogic.jms.adapter.JMSBaseConnection.onMessage(JMSBaseConnection.java:2066)
    at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:2969)
    at com.ibm.mq.jms.SessionAsyncHelper.run(SessionAsyncHelper.java:406)
    at java.lang.Thread.run(Thread.java:595)
    -------------- Linked Exception ------------
    javax.resource.ResourceException: Error creating producer or sending message
    at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1470)
    at weblogic.jms.adapter.JMSBaseConnection.sendInternal(JMSBaseConnection.java:815)
    at weblogic.jms.adapter.JMSBaseConnection.access$200(JMSBaseConnection.java:84)
    at weblogic.jms.adapter.JMSBaseConnection$6.run(JMSBaseConnection.java:707)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
    at weblogic.jms.adapter.JMSBaseConnection.send(JMSBaseConnection.java:704)
    at weblogic.jms.adapter.JMSConnectionHandle.send(JMSConnectionHandle.java:144)
    at weblogic.jms.bridge.internal.MessagingBridge.onMessageInternal(MessagingBridge.java:1325)
    at weblogic.jms.bridge.internal.MessagingBridge.onMessage(MessagingBridge.java:1251)
    at weblogic.jms.adapter.JMSBaseConnection$29.run(JMSBaseConnection.java:2070)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
    at weblogic.jms.adapter.JMSBaseConnection.onMessage(JMSBaseConnection.java:2066)
    at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:2969)
    at com.ibm.mq.jms.SessionAsyncHelper.run(SessionAsyncHelper.java:406)
    at java.lang.Thread.run(Thread.java:595)
    -------------- Linked Exception 2 ------------
    javax.jms.MessageNotWriteableException: MQJMS0008: JMS Client attempts to write a read-only message
    at com.ibm.jms.JMSMessage.newMessageNotWriteableException(JMSMessage.java:4782)
    at com.ibm.jms.JMSMessage.setStringProperty(JMSMessage.java:5738)
    at weblogic.jms.client.WLProducerImpl.send(WLProducerImpl.java)
    at weblogic.jms.adapter.JMSBaseConnection.sendInternal(JMSBaseConnection.java:773)
    at weblogic.jms.adapter.JMSBaseConnection.access$200(JMSBaseConnection.java:84)
    at weblogic.jms.adapter.JMSBaseConnection$6.run(JMSBaseConnection.java:707)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
    at weblogic.jms.adapter.JMSBaseConnection.send(JMSBaseConnection.java:704)
    at weblogic.jms.adapter.JMSConnectionHandle.send(JMSConnectionHandle.java:144)
    at weblogic.jms.bridge.internal.MessagingBridge.onMessageInternal(MessagingBridge.java:1325)
    at weblogic.jms.bridge.internal.MessagingBridge.onMessage(MessagingBridge.java:1251)
    at weblogic.jms.adapter.JMSBaseConnection$29.run(JMSBaseConnection.java:2070)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
    at weblogic.jms.adapter.JMSBaseConnection.onMessage(JMSBaseConnection.java:2066)
    at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:2969)
    at com.ibm.mq.jms.SessionAsyncHelper.run(SessionAsyncHelper.java:406)
    at java.lang.Thread.run(Thread.java:595)
    I am new to JMS
    Please help

    What version of WebLogic and MQ are you using?
    Have you ensured that the target Destination and Connection Factory are both WebLogic artifacts (neither should reference an MQ resource)?
    Tom

Maybe you are looking for

  • Printing from a Stored Procedure on HP-UX

    We've created a Stored Procedure on Our Oracle 8 Database and we need to print an order form to a remote print on a Windows Network. How can I do this.

  • Good for processing data from a web application?

    It seems like all the examples provided for ASA are about processing data streaming in from IoT or mobile apps. Is ASA appropriate for processing data from websites? For example, I have a multi-tenant web API and I need to roll up usage and calculate

  • Filename changing

    I don't remember making any changes to my preferences so am at a loss as to why suddenly in recent weeks if I save a .jpg to my downloads folder or to my desktop when I upload it to another site the Saved As information shows up as: /Users/myfullname

  • What are the questions they  will  ask for inter company sales?

    hi all gurus, pls. let me know the process of inter  company sales and the questions can ask in the interview. thanks all arun

  • External swf :: Scroller bar

    I'm pullling an external SWF in to a smaller movieclip. I need to have a scroller bar. How and where do I need to put it?