TS20000159 after Complition Not Going in Outcome -Rejected

Hi All,
I am working on PR Workflow . Here I used the Task TS20000159 . After creation of PR , the workitem comes in the approvers inbox . When the Approver processes the workitem , the process flow doesnt go into any of the task outcome . Infact it gets strucked here . In Workflow Graphical display , shows green line till this task only .
One more thing this task doesnt disapper from the approver inbox even after processing .
Any idea why this is happening ???
Thanks
MD

hi,
may be u can check for the following things:-
1> the binding b/w the task and the WF
2> the "confirm end of processing has been checked" in transcation PFTC.
in the log, go to the technica details and check the container elements , may b there u wll come to know about the exact issue..!!
please let me know if it helps u
regards
kanika

Similar Messages

Workflow in Project server 2013 online not going particular stage after Approval

Hi All,
i have created workflow using sharepoint designer 2013 for project server 2013 online. and i have also set the approver after the first stage. when i create a project using this workflow, project is created successfully and the approval task also go for
a approval to specific user. and i have set the property that after approval it has to go on specific stage. but the problem is when user approve the task it shows approved but my stage in workflow is remain same. it is not going to any stage.
i don't know why this type of problem is occur.
FYI, i have created same workflow for Project server 2013 on premise(Which is installed in my server) and
it is working fine but when i want to deploy this workflow in
project server 2013 online its giving error.
so please help me to solve this type of issue.
Thanks

I am also experiencing issues with this. After the approval task is completed, the Workflow gets cancelled with the following message
RequestorId: 60d96368-4cb4-b059-8086-604972a92e60. Details: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context)
at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager
bookmarkManager, Location resultLocation)
All other desired workflow actions work as expected. Emails are sent, project is moved from stage to stage, however as soon as the workflow approval task is completed, either Approved or Rejected, the Internal Status is changed to Canceled and the
workflow fails.
What is interesting is when the Approval task is completed, the approver will receive an email notification that the task was CANCELLED or DELETED....
not COMPLETED, which is what would be expected.
Has anyone seen this - any potential resolution?

Hellow my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry

hellow
my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry on.plz help me how it witt work starting.i urgently need to on my i pod.plz help me plzzzzzzzzzzzzzzzz

Hi there shehla sattar,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPad: Basic troubleshooting
http://support.apple.com/kb/ts3274
-Griff W.

When SC is partially rejected my manager no workitems are not going to user

Hi Gurus,
Below is our requirement:
Requester (User) creates a SC of multiple line items. Shopping cart is rejected by the manager for a particular line items and rest of the line items was approved, for the rejected line items workitems are not going to requestoru2019s inbox and also e-mail is not triggered to requistioner.(Informing that the SC is partially approved)
Help us how to implement the above functionality? We have figured out a BADI- BBP_WFL_SECUR_BADI will this BADI suit to our functionality.
IF then throw some input on this. Or please suggest any OSS note related to this functionality.
Regards
Paul

Hi Daniel,
Thanks for the quick response.
WF we used is WS14000133, Last approver is Manager further no approvers.
For Manger they havenu2019t set (BBP_WFL_SECURITY) any value.
Regards
Paul

I bought an iphone 5 from the UK, after unboxing it i found a scratch on the chamfered edge, and when i shake it, i hear sound of a loose part inside it. now I am in Egypt and i'm not going back to the UK. how can i get help in Egypt to get it replaced?

I bought an iphone 5 from the UK, after unboxing it i found a scratch on the chamfered edge, and when i shake it, i hear sound of a loose part inside it. now I am in Egypt and i'm not going back to the UK. how can i get help in Egypt to get it replaced?

iPhone warranty is not international, but is valid only in
the country of original purchase. Since you bought the iPhone
in the UK, your warranty is valid anywhere in the EU but not
in Egypt. You can gry taking it to an Apple authorized reseller,
but don't be surprised if they tell you they cannot do anything.

Deletion change pointers are not going to ECC after C5

Hi,
My issue is that I am running C5 after Planning run.But deletion change pointers are not going to ECC.Because of this we have duplicate of orders in ECC.We are running CCR to bring back the "Planned orders with deletion change pointers and deleting again using RRP4.Why deletion change pointers are not going along with creation change pointer?Help will be highly appreciated.
Thanks&Regards
Venkadesh

Hi,
Check whether you have enabled the " delete events" check box. This check box will be valid if you are publishing the planning results thru background job.
If you set this indicator, the system deletes all selected change pointers without sending them first.
Thanks,
nandha

Outgoing audio. Was not going on Skype after ios7 download.went to settings--privacy--microphone--on--and the problem was resolved.

Outgoing audio. Was not going on Skype after ios7 download.went to settings--privacy--microphone--on--and the problem was resolved.

Hello:>
I created a function "APEX_030200.wwv_flow_epg_include_mod_local" as a sys user, then I dropped it.>
You can't have 'created' this function ! The function is installed by the APEX installer. This function needs to exist in the database for APEX to function correctly. Install the function described below into your database
CREATE OR REPLACE function APEX_030200.wwv_flow_epg_include_mod_local(
    procedure_name in varchar2)
return boolean
is
begin
    return false; -- remove this statement when you modify this function
    -- Administrator note: the procedure_name input parameter may be in the format:
    --    procedure
    --    schema.procedure
    --    package.procedure
    --    schema.package.procedure
    -- If the expected input parameter is a procedure name only, the IN list code shown below
    -- can be modified to itemize the expected procedure names. Otherwise you must parse the
    -- procedure_name parameter and replace the simple code below with code that will evaluate
    -- all of the cases listed above.
    if upper(procedure_name) in (
          '') then
        return TRUE;
    else
        return FALSE;
    end if;
end wwv_flow_epg_include_mod_local;
/Varad

After 10.6.4 update, some audio not going through

After the 10.6.4 update I've been having trouble with some audio not going through the USB headset.
Things that refuse to go through the headset:
* Empty trash noises
* Skype notification noises
* iChat alert noises
Things that are working:
* Coloquy
* iTunes
I've tried toggling the System Preferences obviously. Unplugging speakers and USB headset and plugging back in a number of times (this seemed to fix some things, not others).
Anyone else having the same issue?
(Note to forum mods: you need to add 10.6.4 to your OS dropdown)

Reseting the PRAM has solved this problem.
http://support.apple.com/kb/ht1379

HT5019 unable to get turn on display after turning on the power button ,no caps lock is turning on too,even a light at unlock button to open display is not going down , mine was a late 2008 mac book pro ( 17 inch ).please help me to solve my problem

unable to get my screen on even after turning on power button .
light at display unlock was not going down ,
no caps lock button turning on .
please help me to rectify my problem apple community

unable to get my screen on even after turning on power button .
light at display unlock was not going down ,
no caps lock button turning on .
please help me to rectify my problem apple community

Order not going to alternate resource after optimization

Hi all,
My requirement is order need to be scheduled on all alternate resource... and also it will adhere product sequence...
I have given cost as follows in optimization profile..
Make span=100
Setup cost=60
Mode cost=25
Cost and time i have maintained in setup matrix.
In the cost tab of optimization profile i have given A=10,B=100 as variable and 100,200 in fixed column..
Product sequence is some how adhering..but order is not going to alternate resource....
Thanks
pardeepta

Hi Pradeepta,
I Believe, that might be u r observation.
To achieve the required scenario which you have given, plz follow the below steps
1. Plz check whether u have defined mode priority in PDS or not. If not plz define.
2. After maintaining do new explosion of transaction data
3. Plz maintain the weights in basic settings of optimization profile as "make span = 0", Total setup time = 50, Total mode cost = 70,
4. In Cost tab maintain fixed mode cost as A = 10, B = 12, C = 14 etc (In multiples of 2)
When you try this example ensure that u have 1 and half day load & give scheduling horizon as 1 day while optimization for the resources A, B & C.
System will schedule on Primary resource A first then it willl schedule on alternate resource B. If resource B is also full then only it schedule on resource C.
Note: If you define make span, then system will thing that you want to produce ASAP and results will be accordingly. make span has no relation with mode priority.
Regards
Sravan Maturu

I have updated my iphone 4 to i.o.s 7 and it is not going to turn on after it what should i do? please help me

I have updated my iphone 4 to i.o.s 7 and it is not going to turn on after it what should i do? please help me

Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

PC is not going to sleep or shut down after upgrade to Windows10

Hello,I upgraded my laptop from win 8.1 to win 10.Now when I close the lid or press the power button, the computer turns the screen off, turns the WIFI off, no more hard disk activity but it is not going to sleep.Also when I shut it down it goes throught the same procedure but never turns off.To start again, I have to keep pressing the power button to turn it off, then turn it on again.I did the powercfg - energy and got this in the report, "USB Suspend:USB Device not Entering Selective Suspend"When the computer had just started, I don't get that message, it also goes to sleep and shuts down normally, while later, I get this message in the report and no longer sleeps or shuts down.Any suggestion ??Thanks

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion 15 Notebook and issues with sleep or shut down after upgrade to Windows 10. Try using the Windows Update Troubleshooting tool to fix the problem. Here is a document that shows how to update drivers that are not working correctly with Windows 10. HP has been working closely with Microsoft on the development of Windows 10. I hope this helps. Thanks.

Emails from the organization are not going through ePrint

Hi,
I've been having some issues with the ePrint feature that's configured in one of the printers that we have in our office. The printer is a HP LaserJet 200 color MFP M276nw. Every other client from other email addresses such as Hotmail, Gmail or any other address are able to send emails to our ePrint address and are able to print on it successfully. However, all the emails that are being sent from within our organization are not going through. We get an unsuccesful delivery message from the Exchange server stating that
The server has tried to deliver this message, without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk
We had checked with our Exchange administrators and they have advised that the email is trying to be sent, but in the destination it is being rejected. How can I get this issue to be addressed?

Hello praveen_haridas,
Welcome to the HP Support forums. I understand that your corporate emails are failing when trying to send an email to the Laserjet 200 MFP 276nw printer's ePrint email address.
Are you getting any messages about the failed messages in your ePrintCenter/HP Connected account? If so what does the message state about the failed job?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

'Space after' style not applying to text in 'preview in browser' (chrome) or export modes.

Hi all,
I seem to run into this issue everytime I have two paragraph style applied within one text container.
If I include a heading and apply a paragraph style which includes 'space after' and then some text below with another style it does not appear in either 'preview in browser' (Chrome) or in the exported html. The text appears butted up against each other. Please keep in mind there are no other paragraph or character styles applied to this container.
It works if I 'unlink style from selection'.
However this is extremely frustrating when you have a text heavy site with multiple paragraph styles - it effectively renders paragraph styles useless and generates excessive CSS code and a very time-consuming process if I need to go back and alter the paragraph styles.
Does anyone else experience this issue? Can anyone shed some light on this?
I need to get this site through to my client ASAP and would rather have a professional CSS file rather than one full of work-arounds.
Adobe, please respond ASAP.
Kind regards,
Adam

For two separate paragraph styles to work in one text container in muse,
you need to use a hard return.
You would use Character Styles if you want to use two specific styles inside one text container
with just a "en space" between the text.
This is based on using Muse generated CSS and not going into the CSS files after Muse generated the code and altering to modify the look.
See attached file:

Computer not going to sleep when lid closed

My wife's new MacBook Air has a couple of problems we can't figure out. First sometimes the computer is not going to sleep when lid is closed and when we lift the lid everything is frozen.
Second, the user Library folder is not seeable in her user account. I know it's there because on the side bar there's a short cut to Preferences folder which we can open.
Strange behavior.
Thanks,
Ron

Ron,
The user library folder (~/Library/) is hidden by default in Lion. I assume Apple doesn't want people mucking around with the sensitive files in there. So this is normal behavior.
As for the freezing issue, I would suggest you reset your power management and perform a safe boot to clear out caches. You should also see if the issue persists after disconnecting USB perhipherals.
Here's how:
Power Management:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Safe Boot:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).

TS20000159 after Complition Not Going in Outcome -Rejected

Similar Messages

Maybe you are looking for