TS2090 Apple TV2: HDMI Audio not working

I know this is a very common problem everyone is facing, and I also tryed everything suggested here: http://support.apple.com/kb/TS2090 and here: http://support.apple.com/kb/TS2090?viewlocale=en_US&locale=en_US ... Nothing worked.
I'm using an Onkyo receiver device, is there a chance they aren't compatible?
Or is this a faulty unit?

I've a DV4 and I did get it to work many months back; and have not done it since. If I recall correctly, I had to resort to JACK. YMMV

Similar Messages

HDMI Audio not working on Q190 (along with all higher level Audio Formats)

Help, I have been given the run around via support, I cannot get the HDMI audio to work with my Pioneer Surround Sound, only the Intel display audio shows in control panel (Win 8 X64) and the RealteK S/P Dif port and it is not capable of supporting 7.1 sound or bitstreaming or DTS, Dolby HD, Etc. Tec support appears not capable of fixing the issue and wanted to send me to software support and pay. I have only had the machine for 4 days and it has never supported higher level sound.
Every other device I have (had or currently) connected to the receiver works just fine. I have to figure this out or return the machine, the audio is the most important aspect for me. Besides when you advertise 7.1 support the machine you sell should be able to do it.

Hey guys,
I have had this Q190 with the Celeron CPU since last week and I am using XBMC Frodo and the HDMI is connected to my AVR Onkyo TX-NR809 and from the Onkyo to the TV. And the sound is 7.1 with PLIIZ. It works fine. I think it may be some driver problem because Realtek Audio which is in the Q190 works fine with the Win8 preinstalled. Realtek is kind of bad with driver because I lost my wifi after upgrading to Win 8.1. After a few days with no wifi, I found out that the driver was bad, yes it was a Realtek wifi driver but posted by Lenovo for W 8.1.
I have another friend who also just bought the Q190 and he reported no audio problem so I think it is just a matter of trouble shooting the drive and configuration. I do love the form factor of the Q190.

HDMI audio not working in HP Pavilion dv4 1290-br

Hello, people.
I can't get my HDMI audio to work on my laptop (HP Pavilion dv4 1290-br). The output of aplay -l is:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
I've tried setting ~/.asoundrc, /etc/modprobe.d/alsa.conf, /etc/modprobe.d/alsa-base... Nothing works.
Can someone help me out here?
Thanks!

I've a DV4 and I did get it to work many months back; and have not done it since. If I recall correctly, I had to resort to JACK. YMMV

Apple TV2 led does not work, but apple tv2 works ok - is this normal

I have an apple tv2 that seems to work ok but the led on the front does not work.. is this normal? is the led burnt out?
is there a way to get it back working??
i have restored in via the tv menu and i have restored it via usb cable to itunes..
still no luck..
is there some option that is causing it to not work?
will it work ok with the led not working?
what is it for??
thanks

Try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Resetting network settings: Setting>General>Reset>Reset Network Settings

[SOLVED] HDMI audio not working (worked in Ubuntu)

hi there,
I have very new hardware (Intel Core i5 2500, using the internal GPU) and already knew that it would probably take me a while to get everything working (especially the GPU). I first tried Ubuntu 11.04 Alpha with the xorg-edgers ppa, which already supported the new GPU, including 3D acceleration... unfortunately, it made my X server crash about every 15 minutes. Having heard about ArchLinux before I thought I should give it a try. Turned out the packages that I need for my GPU are only available in testing (xf86-video-intel 2.14, Mesa 7.10, Kernel 2.6.37), so I'm running on the testing repository right now. But I gotta say that I'm pretty impressed by ArchLinux, Compiz is working perfectly smooth and the whole system feels way faster than Ubuntu.
Now regarding my problem, I can't get my HDMI audio to work. Usually I would have said to myself "well, ALSA doesn't support it yet, I guess I'm gonna have to wait" . But the reason I'm writing this thread anyway is that it was working fine in Ubuntu 11.04 Alpha. In Ubuntu, I could use the alsa device hdmi:CARD=PCH,DEV=2 for HDMI audio. The strange thing is, this device doesn't exist on my ArchLinux system. Here is my "aplay -L" output.
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=PCH
HDA Intel PCH, ALC892 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
Front speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
In Ubuntu, I also had hdmi:CARD=PCH,DEV=1 and hdmi:CARD=PCH,DEV=2. So my question is, why are those missing on my system? Kernel and ALSA are the same version (2.6.37 / 1.0.23)!? I also already downloaded a Daily Snapshot of ALSA and did a ./configure, make, sudo make install - still no luck. And btw, DEV=0 outputs sound through my default speakers...
cat /proc/asound/pcm
00-00: ALC892 Analog : ALC892 Analog : playback 1 : capture 1
00-01: ALC892 Digital : ALC892 Digital : playback 1
00-03: HDMI 0 : HDMI 0 : playback 1
00-07: HDMI 1 : HDMI 1 : playback 1
00-08: HDMI 2 : HDMI 2 : playback 1
cat /proc/asound/cards
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xfe620000 irq 51
any help would be appreciated..
...and really thanks to the whole community, my system is stable as never before and the ArchLinux Wiki is probaby the first Linux Wiki that actually helped me solve my problems.
Last edited by 65kid (2011-01-27 18:05:09)

Nevermind, I fixed it myself. ;)
cat /proc/asound/pcm
00-00: ALC892 Analog : ALC892 Analog : playback 1 : capture 1
00-01: ALC892 Digital : ALC892 Digital : playback 1
00-03: HDMI 0 : HDMI 0 : playback 1
00-07: HDMI 1 : HDMI 1 : playback 1
00-08: HDMI 2 : HDMI 2 : playback 1
00-08 is the missing device I was talking about, aplay -L doesn't list it, but it's there. Anyway, I can use plughw:0,8 to use HDMI audio and it works fine, although I'm still confused about the difference betwenn plughw:x,x and hdmi:CARD=PCH,DEV=X...

ATI HDMI Audio Not Working

Hi. I'm trying to get my ATI HDMI audio working. I've followed the instructions at https://wiki.archlinux.org/index.php/ATI#HDMI_Audio and running "aplay -D plughw:1,3 /usr/share/sounds/alsa/Front_Center.wav" outputs no errors nor any sound on my TV. Adding radeon.audio=1 to my syslinux.cfg and rebooting results in no changes.
I have also followed the instructions at https://wiki.archlinux.org/index.php/Ad … s_Not_Work which also resulted in no changes. One note though. When I select my HDMI sound card in alsamixer, there is only one sound bar shown entitled S/PDIF. I can mute or unmute it but not increase the volume from 0. No idea if this matters.
Also, I'm using the xf86-video-ati driver.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Any help would be appreciated, I'm stumped and I would love to get this fixed so I can get xbmc working and fully drop windows.

I'm not entirely sure how I would go about doing that, or if I would need to considering the command I run to test the HDMI audio...
aplay -D plughw:1,3 /usr/share/sounds/alsa/Front_Center.wav
... is, I'm assuming, sending the sound directly through my HDMI due to plughw:1,3 specifying that. I put it as 1,3 after running aplay -l.
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Also, I'm running xmonad, not gnome/kde, so I don't know what settings I can change beside what's in alsamixer.

G62-225DX. HDMI audio not working.

Computer recognizes HDMI port and video is working to TV. Trying to change to default in sound settings but won't change. When I test sound error message "failed to play test tone"

Hi Kevin,
See if this will help:
1. Turn off both systems (TV and PC).
2. Connect HDMI cable to the TV and PC.
3. Turn on TV and select correct HDMI input.
4. Turn on your PC.
Open "Control Panel , Sound". See if you can now select TV (HDMI audio) as the correct playback device.
Jaco
****I am not an HP employee****
Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" to assist other forum users having a similar problem.
HP Products:
810-150se Desktop
17t-j000 Notebook
H8 1380t CTO Desktop
560z Desktop
Errare humanum est.

HDMI audio not working

I recently purchased a LG LED LCD Tv to attatch to my PC via an Hdmi cable. I have it all hooked up, and i get video to the tv... but there is no sound. I have gone into sound options, and there is no HDMI option. I have the show disabled and such checked... I have no clue what else to do.
I am running amd athlon 64 x2 dual core processor 5200 2.70 ghz. 4 gb memory. 64 bit operating system
Any suggestions on what else to try?
and i am running vista home service pack 2

Here is a long thread with a discussion on things to check: http://www.tek-tips.com/viewthread.cfm?qid=1687463
Sad part is, it may just not work. I assume the graphics card is a PCIx16 and not built in on the motherboard.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

DVI to HDMI Audio not working

So I bought a DVI to HDMI and I'm trying to play movies off my laptop to my HDTV and when I try to change the audio output, it does not show HDMI output. I bought this macbook pro 15" in september 2009. Can anyone help?

There is no audio signal emitted from a 2009 MBP's Mini-DisplayPort. You will need to (a) make a separate audio connection between the MBP and the TV set, or (b) use a special adapter that combines a TOSLink or USB audio signal with the MDP video signal and feeds both into an HDMI cable:
http://kanexlive.com/products/iAdapt51.html
http://kanexlive.com/products/iAdapt20.html
Other vendors also offer similar adapters, perhaps at lower prices.
Audio output through the Mini-DisplayPort was introduced in the current MBP models, starting in April 2010.

[SOLVED] HDMI audio not working on new TV

I got a new TV and I get no sound through HDMI from my arch htpc.
However, I don't think the problem is the TV because:
1) Audio from other hdmi sources works
2) When i connect the htpc to a monitor through hdmi and restart, the audio works. While still on, if I disconnect the monitor and reconnect the TV, the audio works through hdmi
It seems that the problem stems from auto-detection of the hdmi. I have also noticed that if i start the htpc unconnected to a display and then try to connect it after it has booted up, i get no video as well. Shouldnt hdmi cables be hot pluggable.
Any way to write out the auto detected configuration for audio and disable detection? Something like this should solve my problem
Edit: solution in post #5 bellow
Last edited by despotic (2013-05-03 04:12:47)

Solved by adding monitor's EDID in xorg.conf. The steps to fix with an nvidia card are:
1) Connect device with which audio works (in my case the monitor)
2) run nvidia-settings and get edid file for the monitor
3) edit xorg.conf and add the following under the device section:
Option "ConnectedMonitor" "DFP"
Option "CustomEDID" "DFP-0:/etc/X11/monitor.edid"
4) reboot or restart X
Sound works now through hdmi connected to TV

ATI HDMI Audio not working. (Radeon HD 4850)

Hey, I followed the directions on the wiki here and I still get no sound. I loaded up alsamixer to unmute the sound output (alsamixer -c1) and the only thing I have is "IEC958" (which I unmuted). I added the "Audio" and "HDMI" lines to my xorg.conf file and restarted, etc. I'm not getting any error messages, I'm just not getting any sound. Has anyone run into this before?
just in case it helps:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 0/1
Subdevice #0: subdevice #0
$ aplay -L
default:CARD=Intel
HDA Intel, ALC888 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
HDA Intel, ALC888 Digital
IEC958 (S/PDIF) Digital Audio Output
null
Discard all samples (playback) or generate zero samples (capture)

Hello aristurtle!
Did you try with other application from aplay, like mplayer, vlc, madplay, mpg123, mpd or in firefox ?
What's the exact error output if you try to start some of them from command line ?

Apple TV 1 audio not working on Internet radio or MyMusic

No sound on music or Internet radio. All the ATV settings seem correct and my regular TV and Blue Ray, which are hooked up to same receiver, speakers etc work fine.
Any suggestions?

I have the same problem which just started this weekend! I can hear the sound it makes when switching menus, but when I try to play music or internet radio...nothing. I double checked all connections just in case but everything seems fine. I've shut off the unit for an entire day and restarted and still nothing.

My hdmi adapter not working anymore, no physical damage. Solution?

My hdmi adapter not working anymore, no physical damage. Solution?
Strange is, that i used it several times, it worked fine. Then wothout any reason (like software updete, etc) it just stopped workung, no sync.
I have not changed any parameters of my TV or Beamer.
Hardware:
Ipad 2, Apple Ipad HDMI Adapter, Samsung P2770FH, Optoma HD 65.
Thanks for any help.

I've only used mine a couple of times without any problem, but due to the thinness of the iPad, care has to be taken in inserting the adapter. Slightly wrong angle and it won't go it.
I had a laptop a few years ago where the USB connector failed. I had it replaced under the warantee, The service man told me it was not an uncommom failure on a laptop due to people "torquing" the USB socket while inserting/removing USB items. I have much the same feeling when inserting either the charger cord or my HDMI adapter.
From your description, unless the HDMI adapter failed internally, it sounds like the socket is causing the problem. A few days ago we watch our first movie from the iPad via my ATV2 and "Air Play". Worked great so I don't plan on using the HDMI adapter much at all in the future. Yes, it is a $99 solution, but it works for me. Of course, I already had the ATV2. I doubt if I would buy one just for this abiliity. If nothing else, it seems like a trip to the Apple Genius bar is in order for maybe a replacement unit.
However, with iOS 5 coming out with supposedly total mirroring, it might be worth thinking about getting an ATV2.

Sound/audio not work

sound/audio not work
Model- Compaq M2000.
S/N; CNF550117L,
P/N-EE462Pa#UUF
M2235

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Hdmi does not work since updating to jelly bean

Since updating my at305-16 to JB hdmi will not work . I go into settings and select hdmi out but get no signal on tv.

I think it might be a JB driver issue. I was having the same problem connecting it to my LCD, but when I switched to my plasma it works. The LCD is 1080P Auto the plasma is 720P auto. But fropping my LCD to 7120P didn't help. I don;t know if you have two TVs to try on, but it couldn't hurt.

TS2090 Apple TV2: HDMI Audio not working

Similar Messages

Maybe you are looking for