TS2220 in the system profile window there is no airport card listed under network. How do I fix this?

There is no airport card listed under network, on the system profile window. How do I get the airport card working?

Try an SMC reset and PRAM zap.

Similar Messages

  • My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file loca

    My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file location to run the update in all of my iTunes files as well as when I've tried reinstalling it.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • TS3989 When I open the icloud control panel, I cannot select the option to "turn on" photo stream.  The option is there but i cannot click on it.  How do I fix this problem?

    When I open the icloud control panel, I cannot select the option to "turn on" photo stream.  The option is there but i cannot click on it.  How do I fix this problem?

    iCloud does not support Windows XP.

  • Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi ?

    Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi or simply solve this, I have tryied shotdown pressing keys like P and R, option, etc. Please help me .

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I cannot click on the menu, the beachball is rotating on my desktop, none of the files appear, and when I click on the Finder, the files are there but inaccessible. All applications open. How do I fix this?

    I cannot click on the menu, the beachball is rotating on my desktop, none of the files appear, and when I click on the Finder, the files are there but inaccessible. All applications open. How do I fix this?

    hi there,
    try booting into safe mode, by pressing the Shift button once you hear the startup sound.
    Hope this helps,
    Chris

  • I keep getting the spinning wheel, and macbook pro seems to be slowing down.  How do i fix this without buying software?

    I keep getting the spinning wheel, and macbook pro seems to be slowing down.  How do i fix this without buying software?

    Go to system profiler and report back the amount of RAM that you have.
    Make sure that you have at least 20% of your hard drive free.
    Make sure you don't have a lot of items on your desktop as that can slow things down.
    Quit applications that aren't responding or you aren't using and won't be using for a while.
    ~/Library/Caches Quit all applications and delete this folder. Do a regular delete then do a secure erase on all the items that won't delete.
    If it only happens with a certain application (Safari for example)...
    1. Quit the application (Safari)
    2. Open ~/Library/Preferences and find the file for safari (com.apple.Safari.plist).
    3. Put the file in the trash. Do NOT empty the trash yet. Open the application and make sure everything's ok. Now you can delete the file. In Mail if you trash the file, you will get rid or your setup.
    Make sure that your dashboard doesn't have too many widgets and use Activity Monitor to see what it's using.
         There are ways to disable if you want to.
    Make sure that all of your software is up to date.
    Repair permissions (it can't hurt)
    Don't have a lot of login items.
    Your internet browser shouldn't have a lot of extensions.
    I hope this helps
    Chris

  • My Outlook/iCloud calendar invites to others appear to work on my end and sync with my PC and mobile, but when other people "accept" the invite, it will not populate/add in to their calendar. How can i fix this without turning off iCloud?

    My Outlook/iCloud calendar invites to others appear to work on my end and sync with my PC and mobile, but when other people "accept" the invite, it will not populate/add in to their calendar. How can I fix this without turning off iCloud?
    I am at a new office that uses Outlook (not Outlook Exchange) which does not sync with my mobile... I just got iCloud set up on my PC to sync my contacts, calendar, reminders, etc... The sync worked (not without flaws, but the other issues seem solvable... I think), so that i can now see all my appointments on both my phone and on my PC. The problem I am having is that iCloud moved all of my calendar items from Outlook into iCloud calendar and now when I send out meeting/calendar invites the recipients may accept them, but the meeting does not get added to their calendar. This is a huge problem and may mean that i need to turn off iCloud.
    Does anyone know how to fix this?
    Thanks!

    I am replying to my own post here as I seem to have fixed the problem.
    I do have some calendars that are shared. Some of those are shared with users who have time zone support turned on. So i activated time zone support on my iphone, then deleted my icloud subscription. I then signed in to icloud again and voila... problem solved.
    It is a weird one as the other calendar views were always fine and when you opened an event that appeared in the wrong day (on list view), the correct date of the event was shown in the information...
    one more bug in a complicated system I guess

  • I reinstalled iPhoto on my MacBook Pro. It opens, but only shows the loading bars and does not allow me to add pictures. How can I fix this?

    I reinstalled iPhoto on my MacBook Pro. It opens, but only shows the loading bars and does not allow me to add pictures. How can I fix this?

    Mac 101: File Sharing
    Mac OS X 10.7 Help: Transfer files between two Mac computers
    Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
    Mac OS X 10.7 Help: Use iDisk to share files
    Mac OS X: Sharing your files with non-Apple computers
    How to share a Mac's files with a PC and vice versa.

  • My app store will not open. when i try to open it i get an error that reads "You can't open the application App Store because it may be damaged or incomplete". How can I fix this?

    my app store will not open. when i try to open it i get an error that reads "You can't open the application App Store because it may be damaged or incomplete". How can I fix this?

    I am having the exact same problem.  MacForums has been helping me, and I called Apple.  After trying everyone's suggestions, and Apple's, no success.
    My App Store app still says "incomplete or damaged."  There is even a circle with a line through it on the icon.  Apple said reinstall my Snow Leopard upgrade disc (not my original Leopard disc) and then run the Combo Update (like your suggestion).  Did not work.  I also updated the software from "Software Update".  Rebooted.
    I think this started after I replaced my hard drive with a SSD and moved the hard drive to where the DVD was.  I wonder if the person above who had the same problem also installed a SSD?
    Anyway, anymore ideas?  Even Apple is stumped.
    (In answer to the other post above, my Quicktime works fine.)
    Message was edited by: mrivmriv
    Just did some more reading.  I was going by the icon in the dock.  When I checked in Finder, there it was, fixed and brand new!!  Thanks, anyway.
    Message was edited by: mrivmriv

  • My backup to Time Capsule is taking over 4 million days. How can I shorten the time? I am not able to connect through ethernet. How do I fix this?

    My backup to Time Capsule is taking over 4 million days. How can I shorten the time? I am not able to connect through ethernet. How do I fix this?
    Not only that but my Mac Pro keep running and does not stop, my Address book has a blue light under it but wont open, the light for my monitor in the bottom right corner wont turn on or off. Please need help...

    It sounds like there is an issue with the Mac itself.
    Use the verify disk A5 in troubleshooting.
    http://pondini.org/TM/Troubleshooting.html
    Even if you cannot connect by ethernet, at current location.. you can simply disconnect the TC from the network and bring it to the Mac and plug it in by ethernet. The TC can be reset if you haven't got a suitable current setup (save previous setup before you change it) and run just as backup device.. do the backup and then return it to the network.
    If this is just a standard incremental backup.. then something has broken. The issue is not the TC pe se but failure in hardware somewhere.

  • When I try to open iweb I get the following message: Can't open file "~/Sites/NAVIGATOR/index.html." How do I fix this? Using 10.6.3 soon to be 10.6.6 and then Lion.

    When I try to open iweb I get the following message: Can’t open file “~/Sites/NAVIGATOR/index.html.” How do I fix this? Using 10.6.3 soon to be 10.6.6 and then Lion. I have never opened the product before and have had it on the computer since new.

    Go into your Users/Home/Library/Application Support/iWeb folder and see if there's a file titled Domain.sites.  If there is double click on it and see if iWeb opens.
    If there is no Domain file there do the following:
    delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
    go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
    Click to view full size
    launch iWeb and try again.
    OT

  • I have just required a second hand mac and when I try to download a song or import a cd to iTunes an error notice says that I am not priveledged to make changes? The preference settings and apple I'd seem to be ok. How do I fix this?

    I have just required a second hand mac and when I try to download a song or import a cd to iTunes an error notice says that I am not priveledged to make changes? The preference settings and apple I'd seem to be ok. How do I fix this?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • When I install any theme, the homepage (more specifically Black Google) will not load as hompage. How can I fix this?

    When I install any theme, the homepage (more specifically Black Google) will not load as homepage. How can I fix this?

    Do a malware check with several malware scanning programs on the Windows computer.<br>
    Please scan with all programs because each program detects different malware.<br>
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Right clicking anything in web pages (for an example, when I want to open a link in a new window) it just gives me some grey box. How do I fix this?

    Right clicking anything in web pages (for an example, when I want to open a link in a new window) it just gives me some grey box. How do I fix this?
    == This happened ==
    Every time Firefox opened
    == Today

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • My computer using Windows 8 doesn't recognize my Canon Rebel. How do I fix this?

    My computer using Windows 8 doesn't recognize my Canon Rebel. How do I fix this?

    Hi MWCRILLY,
    To connect your camera to a Windows Vista or Windows 7 computer or Windows 8 computer, you'll need to change your camera's "Communication" mode.
    To set your camera up for this, please do the following:
    With the camera disconnected from the computer, turn the camera on.  Press the "Menu" button.  Now select the [Wrench, Hammer, 2] tab.  Scroll down to "Communication" and press the "Set" button.
    Select the [Print/PTP] and press "Set".  This process is more completely described (and illustrated too!) on page 121 of your Digital Rebel XT instruction manual.
    Now connect your camera to your computer and turn the camera on.  Your computer should now recognize and have access to your Digital Rebel XT.
    Unfortunately, Canon software cannot communicate with the Rebel XT when operating in this mode.
    You may download your pictures using Windows Photo Gallery.  If you haven't already done so, you may retrieve and install this program from Microsoft's download.live.com.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for

  • Problems transferring to new computer.  Is Win 8.1 problem?

    Problems transferring to new computer.  Is Win 8.1 problem?

  • MB_DOCUMENT_BADI - SAP R/3 release upgrade from 4.7.1 to ECC 6

    Once finished upgrading from SAP R/3 4.7.1 to SAP ECC 6, from SPAU I see that there was no problem on the implementations of this BAdI. But when I tried the transaction, where this BAdi was implemented in, I realized that my implementations were not

  • Refresh SQL Report Apex 4

    Hello everyone, On one of my pages i have 2 reports. An interactive Report and a SQL Report.(APEX 4.0) I don't know why Apex doesn't support 2 Interactive Reports on the same page. I need to refresh this reports on certain moments.Using a Dynamic Act

  • BASICPAY create/change/delete Workflow

    Dear SDNers, I am having some problem to trigger workflow for any event respect to basic pay infotype. When I create basicpay infotype against any pernr, below events are triggering Object Type               Event BASICPAY               CREATED BASIC

  • Getting javadoc comments of the base class

    Hi, I have a class Foo1, and a class Foo2 which extends Foo1. All the method are implemented in Foo1, Foo2 simply extends this class and does not override any of the methods. Is it possible that I could get the javadoc comments for all the methods in