TS2235 How do I install airport express on a windows 7, 64 bit PC ( I am using a Belkin Router)

I WOULD LIKE TO USE MY IPOD TOUCH TO PLAY MY ITUNES LIBRARY MUSIC IN MY UPSTAIRS HOME THEATER. USING A NEWLY ACQUIRED AIRPORT EXPRESS. HOW DO I INSTALL THE AIRPORT EXPRESS. IT IS ON A LEVEL AWAY FROM MY ROUTER AND PC..

USe the iPod to set up the express.
Set up your Wi-Fi network with your iPad, iPhone, iPod touch, or Mac.
http://www.apple.com/airportexpress/features/easy-setup.html

Similar Messages

  • How can i install airport express A 1264 on os x 10.9.2

    How can i install Airport Express A 1264 on os x 10.9.2

    Hello chawich
    All you should need is Airport Utility that is located in the Utilities folder that sits in the Application folder. If you have an iOS device, you can also set it up with that device with Airport Utility or in Wi-Fi section in Settings.
    AirPort Utility software and firmware downloads
    https://support.apple.com/kb/HT1998
    Regards,
    -Norm G.

  • How do i install airport extreme on a windows pc and route it to another windows desktop?

    How do I install airport extreme into a windows desktop pc and then successfully route it to another windows desktop?

    The AirPort Extreme Base Station (AEBS) is an Internet router that supports both wired and wireless network clients. You can connect both of your desktop, using either media, to the AEBS for network connectivity.

  • I have installed airport express and it lights steady green. But when I use the airport tool, nothing can be found.

    I have installed airport express on my Window 7 and had problem to find the airport express.
    I solved the problem by turning off my AVG firewall and  the airport tool found the airport express and it went steady green.
    I then turned on the AVG firewall again and it continues ok.
    But when I turn off and restarted my laptop I have to follow the same procedure.
    The AVG firewall is set to All Allowed for the airport express.
    Is there anybody out there that can give assistance to solve this problem?

    Hi,
    I solved the problem myself by updating the Wi-fi driver.
    Now it works perfect.

  • How can I install Mac Mini drivers for Windows 7 32-bit if I didn't install Windows 7 using bootcamp?

    Hello. I have a mac-mini (mid 2010) and with bootcamp, was successfully running XP.
    I then decided to upgraded to Windows 7 had lots of trouble installing it on my existing bootcamp partition.
    I finally was able to install Windows 7, by just booting off the CD and letting it install that way.
    But reading more on it, I think I was supposed to use Bootcamp to do it for me...
    I had thought the Bootcamp Assistant was for only fresh installs of a Windows O.S. where no partitiion existed previously.
    I had a partition so thought Bootcamp wasn't required for my needs.
    But now, inside Windows 7, I have 0 drivers installed. I have an AirPort Express, so on the Mac side, I downloaded
    and installed the Windows version of AirPort Utility and copied it to my USB stick. Then
    I exported my settings to a text file on a USB Stick, then on Windows was able to successfully install AirPort Utility and import the settings.
    But it still doesn't find my network. I am pretty sure I'm broadcasting my SSID...
    So I need to know the following:
    1) How to know I'm broadcasting my SSID - where do I find this in settings?
    2) How I can install my mac-mini drivers on Windows 7 so I can use my existing wireless network, now that I've gone through the installation without using Bootcamp?
    3) Do I need to set up network adapters and all that stuff in Windows 7 first? If so, how and what drivers do I need?
    One other thing I tried was downloading Bootccamp 4.x and installing that on Windows 7 to see if it gives me the drivers that were supposed to be written to my USB stick if I had installed Windows 7 using Bootcamp in the first place... However I think the message it said was that it couldn't install as it was the wrong version. So I'm still stuck without drivers and therefore no internet.
    And that is my main task - getting the Internet up and running in Windows 7.
    Other Info:
    I'm running Mac OS X 10.6.8 with 2 GB of memory.
    I installed the 32-bit version of Windows 7 and I don't know what version of Bootcamp I'm running...
    I can tell you that BootCamp Assistant is v3.0.4, but don't know if that means Bootcamp is also 3.0.4.
    Hope you can help.
    Thanks.

    I tried something that worked for me...
    Knowing that after my install of Windows 7 wasn't the correct method (didn't go through bootcamp), and the BootCamp 4.x package wouldn't install under windows 7, I tried reinstalling Bootcamp 4.x in Windows 7 to see what the exact message was it gave me. The message said it couldn't install because of a 32-bit O.S. vs a 64-bit version of the package.
    So that got me thinging - my XP version was 32-bit, and so is my Windows 7 installation. So I tried installing the bootcamp that came with my Mac OS X installation CD. This is bootcamp version 3.1.
    Not only did it install, but it practically took care of everything driver-wise for me. I was then able to see my wireless network, enter my password and I was connected. The only thing else I had to do to get on the Internet was bring IE8 online (guess it ships offline by default). Firewall and Antivirus are now installed, just a few more things to go.
    That's one thing that's just not clear that I'll be sure to note for next time... The Bootcamp packages you download are actually driver packages for Windows. That is where the Windows drivers exists that are necessary to make your Windows 7 PC work on a bootcamp partition!
    I didn't need the AirPoirt Utility at all (at least, I never went into it).
    Thanks VikingOSX for your post. I will not need to follow the steps you provided, but they may help someone else as all of these bootcamp issues I've been reading seem to be very unique per installation.
    Hopefully my solution helps others.

  • HT1515 Just installed Airport Express on Mac 10.6.8  Can't see base station.  Hard Reset the Airport.  Rebooted machine.  How can I tell if this is a Mac problem or Airport Express Problem?

    I have a Mac 10.6.8.  Just installed Airport Express.  I can't see any base stations.  I did a hard reset on the Airport Express, turned off all devices,  turned them back on.   I see plenty of Airport networks in the neighborhood.  How can I tell if I have a Mac problem or an Airport Express problem?  Airport Express blinks Amber. 

    Obviously,  I'm still using ethernet to be able to reply to this.
    Alright, use the same ethernet cable to plug directly into the airport express. This will FORCE the airport utility to now see it regardless of weak signals & interference. You can set it up that way.
    BTW, what is the original intent on the express?

  • How do I get AirPort Express to work with my iPhone 4s?

    Hey there,
    I installed AirPort Express yesterday to make a wifi network out of the ethernet access that I have. It worked perfectly fine with my MacBook but my iPhone 4s does not seem to be able to hold on to the network! I can connect to the network and the wifi sign appears on the iPhone screen but after about 10 seconds it disappears again... and then it comes on again... and disappears again...
    Does anyone have the same problem? What can I do to resolve this?
    Thank you a lot for your answers in advance!

    Thanks for your help III
    BUT: I really don't get it! About ten days ago or so my iPhone 4s was suddenly able to hold on to the AirPort Express network.
    But then yesterday all of a sudden the problem was back again!!! I didn't do ANYTHING! It was just back out of nowhere! 
    Wi-Fi connection on my iPhone came on... and off... and on... and so on, while my MacBook was working perfectly fine with the network!
    So I reset the whole thing again on my MacBook with the AirPort utility, I reset the AirPort Express and I reset my iPhone... still not working... Honestly this freaks me out. Especially because it worked for more than a week and as I said I did not change a thing!!!
    Does anyone have any ideas how to solve the problem other then reset everything? Or is there an explanation around for this occurence???
    Thanks for your Help!

  • Can't install AirPort Express, and unit is flashing amber

    Hi,
    I've just bought an Airport Express unit, with the aim of playing iTunes remotely (I have a separate wireless connection to the net). I have two problems:
    1) When I try to install the Airport Express software provided, the setup tells me that I have a later version of iTunes and cannot install Airport Express. Does that mean iTunes v7.0 (which I am using) already contains Airport Express?
    2)My Airport Express unit is flashing amber. Resetting the unit makes no difference. I suspect this is due to the problem of 1) but am really stuck on how to progress!
    many thanks in advance!
    Mike

    Duane,
    Thank you for your speedy response!!!!
    When I open the AirPort Utility.app, a window opens called AirPort Utility, the twirly/stopwatch icon goes into motion next to the words"Discovering Base Stations." After this happens for some seconds, these words appear...
    "AirPort Utility was unable to find any AirPort base stations. Please make sure the AirPort base station you want to set up is plugged in and in range of your computer, and then click rescan to try again."
    My express is plugged in five feet from my computer. What to do....?
    Many thanks!
    Terry

  • How to set up Airport Express in Bridge mode for hotel use

    Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n.

    +"Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n."+
    AirPort Utility is the application that must be used to setup and make any configuration changes to the AirPort Express. I'm not aware of an "App" for this.
    If you could borrow a computer from someone there for 30 minutes or maybe use the computer in the lobby, you could download AirPort Utility and reconfigure your Express. To help with setup, use an ethernet cable from the computer to the Express to help AirPort Utility "see" the Express.
    http://support.apple.com/downloads/#airport

  • How does one install a express sql server to run with Visual Web Developer 2008?

    I successfully installed .NET framework v 3.5 and VWD 2008 on a new Vista laptop. When I want to add a Sql Server database to a website, errors tell me to install SS 2005 Express. MSDN SS 2005 Express download tells me I MUST  first install .NET framework v 2.0 before SS 2005. When I try to install framework v 2.0, I'm sent to v. 3.5 and no way to download SS 2005.
    How does one install a express sql server to run with Visual Web Developer 2008?   

    Momark,
    Do you still need help with this?
    Thank you!
    Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • I just installed airport express now I would like to change the name of my net woerk

    Hi there , I just installed  Airport express and wpold like to change the name of my network , it took me long enough to install , do I have to uninstall before I cAcan do the name change, thanks in advance    the woodworker

    Since you indicated that you were using OS X (10.6.8)......
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on AirPort Express, then click Manual Setup
    Click the Wireless tab located under the row of icons
    Edit the Wireless Network Name as you wish
    Click Update to save the new changes
    Allow a full minute for the AirPort Express to restart

  • Installing Airport Express

    I can't install Airport Express on my Mac. It says "you cannot install Airport on this volume. The Version of Mac OSX on this volume is not supported" The Airport disc says 10.4 or higher is required and I'm running 10.5.6.

    Mac OS X 10.5.6 includes the software for it. You don't need to and shouldn't install anything.
    (41417)

  • How can I install Photo Expressions software?

    How can I install Photo Expressions software?  I tried to drag and drop all items on to the Applications folder as I've done with other software, but this did not seem to work.

    Those are definitely windows files. Is it possible that the CD/DVD has a different folder for a Mac version of the program? If I have found the correct web site (Individual Software) there is no mention of a Mac version.
    Stedman

  • Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise

    Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise

    If the AX is working properly, it should not show up in your list of available networks (since it is "joined" to your router). Have you unplugged and replugged your AX? Unplugged and, after a minute, replugged your router? Do you have MAC address filtering enabled on your router? (if so, disable it to see if the AX works ... it will broadcast its MAC address to the router, and you can add it.) Is your firewall turned on? Turn it off and see if you can access Airtunes. You will have to open a port in your firewall if that is the case.
    The AX should have the same network name as your router the wireless tab. When it shows up, what name is it broadcasting?

  • How good is the Airport Express inbuilt Digital to Analogue converter?

    How good is the Airport Express inbuilt Digital to Analogue converter?
    I have just purchased a 2012 dual band Airport Express which has the combined optical/3.5mm analogue jack audio output.
    This is to connect to my hifi seperate amplifier, which does not have an optical input.
    This gives me a couple of options
    a) just use a standard 3.5mm jack to phono cable (and use the built in DAC in the airpor express)
    or
    b) purchase a seperate DAC to convert the optical from the Express into phono and connect that to the amplifier
    I will be sending 250-320kbps music to the airport express wirelessly.
    Will I see much/any benefit in sound quality with option B vs option A?
    I ask because option A is free (I already have the cable) and option B will be around £20-£30 depending on which DAC I were to buy (I would also need a new TOSlink optical cable).
    These are the sort of DACs I was looking at.
    Thanks, Chipstix

    How good is the Airport Express inbuilt Digital to Analogue converter?
    Please check out this stereophile article on the earlier AirPort Express. I understand that the newest version may use basically similar audio hardware.
    I will be sending 250-320kbps music to the airport express wirelessly.
    The AirPort Express Base Station (AX) works only with iTunes v4.6+ and is limited to music files that iTunes can read; ie, 16-bit data only. (An exception is you can use a third-party product like Rogue Amoeba's AirFoil to stream other non-iTunes sources.) These data, though, can be in any file format that iTunes recognizes, from lossy MP3s at the low-quality end of the spectrum to Apple Lossless and lossless AIF or WAV files at the high end. It is also important to note that the AX functions only at a 44.1kHz sample rate. When you play 32kHz or 48kHz data, iTunes sample-rate-converts the data in real time before sending it to the AX.
    iTunes uses a QuickTime CODEC to convert audio files to Apple Lossless, and then, uses AirPlay to send them to the AX. In turn, the AX uses built-in software that converts the Apple Lossless to an Encoded Digital Audio format. From there, digital audio is sent to a optical transceiver to convert the electrical signal to an optical one before sending it to the innermost part of the audio port. As you already know for analog, the AX has a built-in DAC to convert the Encoded Digital Audio to Analog which is sent to the same audio port.
    One operational glitch is the fact that, as the AX doesn't have a local clock circuit, when the incoming data is interrupted, as it is when you change songs in iTunes, there is no longer a digital output to feed the DAC, which loses lock as a result. Using an external DAC, which may offer better audio performance, may have issues with this glitch. Some DACs are more sensitive than others.

Maybe you are looking for

  • Best Practice for Significant Amounts of Data

    This is basically a best-practice/concept question and it spans both Xcelsius & Excel functions: I am working on a dashboard for the US Military to report on some basic financial transactions that happen on bases around the globe.  These transactions

  • Iphone 5 Ios 6.1.4 brightness problem

    I have a problem with my iphone 5 running ios 6.1.4 Randomly, sometimes when pushing the home button, or pressing the power button, the brightness of the screen goes all the way down to zero (dimly lit). I have to go in to settings and tap the bright

  • Single song wont play on my ipod

    I have one new song in particular that will not play on my iPod. It works fine on my computer in iTunes, but in my iPod when I try to play it, the iPod hangs for about two seconds, and then skips over to the next song. I figured that the file must ha

  • ORA-01653: unable to extend table SYS.SOURCE$ by 64 in tablespace SYSTEM"

    Hi, While creating a package the , I got the following error. "ORA-00604: error occurred at recursive SQL level 1 ORA-01653: unable to extend table SYS.SOURCE$ by 64 in tablespace SYSTEM" Could anyone please explain, how to solve this problem. Thank

  • Upon Order TECO Error encountered "no material number transferred"

    Hi Experts, Can help me with this error message upon order TECO? "no material number transferred". I cannot proceed. Please let me know where to look into that caused the error message. Thank you very much.