TS2289 Audio in iMovie 11 files but missing in sections when shared to iDVD. The movie and audio plays fine in iMovie but my burned iDVD movie is missing some audio .

I imported a movie into iMovie 11 from a Canon Vixia HFR 300 SD card with no problem. I have a new iMac running OsX 18.8.4 I think. I added chapter markers and shared it with iDVD. And burned it to a DVD. Towards the end of this 30 minute movie the sound just stops. I do remember some screen came up when I wanted to burn DVD that said something was wrong with files but I couldn't figure what do to fix it and allowed me to continue. Any ideas?

Hi
Either the problem is in iMovie or in iDVD
two notes
No Audio in iMovie
Most common origin is use of audio from iTunes.
Work around -
• Select needed audio to one new playlist
• Copy out this as an Audio-CD .aiff (not .mp3)
• Use this in the movie-project
Other origins are
1. strange / alient file formats as -
• .mp3, .avi, .wmv etc
• Convert them into .aiff 48kHz 16-bit and use this
2. the Mac is set wrongly in regard of midi -
• Close iMovie and other programs
• Start GarageBand
• Make a new GB-project and play some notes
• Close GB and Save
• Now try iMovie again
3. No audio when playback in iMovie 1 to HD 6.
a. in iMovie pref. - deselect ” Playback via Camera”
b. in System preferences - see that Audio out is not set to zero. Mine often does this
without me knowing why.
4. iMovie’08 & 09 & 11
• Toggle audio-scimming by cmd-K
Stuttering audio and video
1. FileVault is ON - Turn it off
2. More than 50 audio files in a movie-project
Mix down to one audio clip
3. Project is stored on one (USB) external hard disk - should be a FireWire one
4. the External hard disk is not Mac OS Extended formatted - but
UNIX/DOS/FAT32/Mac OS Exchange and this will not work for Video.
5. To little free space on internal boot hard disk.
I go for a minimum of 25Gb free space when project is imported and edited and this goes for
4x3 SD Video. For 16x9 HD my guess would be about 5 times more at least.
Neither Mac OS, iMovie or iDVD can address any other hard disk than the boot drive for it’s
scratch files. (Unlike Final Cut Express/Pro where You select scratch disk/s)
6. Network storage - DOESN’T WORK
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
•OR burn with Roxio Toast™ if You got it
Yours Bengt W

Similar Messages

Ive used Youtube Converters to download my music, but since ive updated to IOS 7.3 the songs i download, play on my itunes but are greyed out when i try to sync them to my iphone 5? HELP !!

Ive used youtube converters for ages now, but since i did the last update, its just not working? This hasnt happened before with any of the other updates? Ive tried deleting them and redownloading them, using different MP3 converters, they've all worked before but for some reason, itunes are not accepting them ?! Please help, i cant tell you how much its getting on my nerves !
If someone could help me out asap, id be more than appriciative !
Thank you xo

On your iPad tap Settings > Store
Switch Books off then back on then reset your iPad.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

I have an iMovie that I created 10 years ago. I found the disk and imported. Everything is there except the sound! I converted in Wondershare to MPV4 but still no sound. There is an audio clip that was imported from an analog video camera.

I have an iMovie that I created 10 years ago. I found the disk and imported. Everything is there except the sound! I converted in Wondershare to MPV4 but still no sound. There is an audio clip that was imported from an analog video camera. Does anyone know how I can get the audio back?

Whitelab Records wrote:
So, 20 views and nobody's anybody the wiser?
A small update to this issue....
I have been trawling the forums to find an answer but to no avail...
And... I've tried exporting and bouncing individual stems and the full session, either by muting all bar the stem or soloing the stem.....and still nothing.
Same problems.....everything is audible in audition but nothing plays on playback.
Since the 'prelisten' channel strip is Solo safe this would indicate that you have a track or channel strip soloed somewhere else, out of sight. Are the Mute buttons on your channel strips blinking?
To view all objects in your mixer, click the button. You may have to scroll sideways to check the whole mixer.

Video plays fine in iMovie but not in Web Gallery ?

Hi
I managed to import some small video clips to iMovie 08 using Streamclip (converting to .dv files).
The movies play fine in iMovie - no problems. However when I publish to Mac Web Gallery (I only published "mobile" size), one of the videos always hangs at the same point. The clip starts playing but you can see the clip stop loading and then it stops playing at the exact same point about 3 minutes in.
The Web Gallery says the clip is 4mins 36secs long but it never plays it in full. I've removed from Gallery and republished. I've also deleted the project and started from scratch. Both have failed to cure it.
Also tried it in Firefox 3 and Safari - same result.
Why is Mac Web Gallery struggling to play all the clip?
Thanks for any input!
Martin

Which version of iMovie?
If you are on version 8.0.6, this is probably due to the use of speed changes like fast motion or slow motion.
If you have speed changes in your project, you need to stick to the pre-set tick marks of 25%, 50%, 100%, 200%, 400%, 800%, etc. If you use a custom percent like 58% or 139%, you will get weird audio behavior in your final product.

MP4 Plays Fine in Quicktime, but Audio Lags Near Clip's End in WMP. Huh?

This is weird. I've made several MP4s in Premiere Pro CS6, some only 10 minutes long, and the audio goes a bit out of sync (lagging behind) only in WMP, not Quicktime, when playing the rendered MP4. QT plays it all just fine. Is there something needing to be set in Premiere or AME to make it all stay sync'ed and play fine in any player?
Quick backstory: I shoot 1920x1080p DSLR video at 24fps (23.97#) and I capture audio separately on a Tascam portable at 24-bit 96kHz (which is think is 29.97) and toss it onto a Pr Pro CS6 timeline. I do use the cruddy camera audio just for syncing then ALT+Click to separate the camera's audio track and delete it, leaving the now-synced good audio in place. Then I toss a few transitions and effects (mostly color grading) on the video, nothing fancy, and export out an .MP4 from Premiere which of course fires up AME. I think the problem is the preset I'm picking. A screenshot of my AME settings is attached. I am using one of the presets for Apple TV/iPad/iPhone which is basically renders the video down to 1280x720p with H.264 compression (no surprise that Quicktime plays it back without issue). I'm assuming a codec comes into play here, or just WMP being stupid? I know what a codec is but I don't Premiere which one to use (I assume you can), so if that's the answer please elaborate a bit when you answer, lol. I'm a seasoned photographer and a fairly green video editor (and a lousy video shooter, lol!).
As a further test, I sent the timeline out to an MP4 again but this time I simply chose H.264 and picked the HD 23.976 1080p preset which does use different VBR, etc. That video plays fine in both, but a 10-minute MP4 is almost 2GB! I was hoping for something in the 100mb-150mb range so I could YouSendIt out to people, and the lousy AppleTV/iPhone 4 720p H.264 preset does give me a filesize in that range.
Any thoughts on what to set to get a workable filesize of <200mb with a 720p clip that actually works in WMP as well as QT? I hope I'm even asking the question correctly.
Thanks!

Harm, I didn't pay attention to those settings, I should have. I got hung up in the preset names and figured those were my only choices. How green I am, lol. I made a preset with a Target of 4 (max 6) and VBR 1 Pass, and I knocked the audio down to 128K being it's just speech, and it all worked great. The new file plays in both players perfectly and also plays on my iPad with no jitter. Filesize is about 240mb but that's fine, it works. Problem solved and in the books. BTW, I use a GTX570.
Jim, I agree, VLC is super, it was the only player that would play 5D Mark II files right out of camera back in 2008, on my dual core Dell laptop with a cheesy Nvidia 7900 graphics card. Problem is, the majority of people I'm sending these MP4s to are Mums & Dads in our church, etc, and you know quite well that those folks are running some consumer Dell or HP setup they bought at Costco on closeout.
Funny backstory, when the 5D2 came out in Sept 2008, that was what thrust me into video. So I immediately bought the Prod Premium CS4 Suite (already owned Photoshop for a few years being a stills guy) and installed it on that Dell 17" laptop I mentioned above. After getting the 5D2 finally in Jan 2009, I actually had the nerve to take my first attempt at creating a video in Premiere and encoding it on that laptop. I literally had to kill AME partway through because I was seconds away from burning out my processor (I had been using RealTemp because of how hot that thing ran using Word, lol). It was that event that made me convince myself to start researching how to build a real editing PC (using an i7 920 at the time). I probably drove Harm nuts back then with all my questions, lol! But this rig has been my workhorse and has been through countless upgrades, the only thing remaining from the original 2009 build is the case and the power supply.
I know, you guys didn't need all that info, just felt like shooting the breeze. Thanks again!

I cannot upload my iMovie video to Facebook, etc. I cannot even attach it to an email, an 'error' message comes up when almost complete. It plays fine in imovies, VLC, mplayerx. Confused, is the file damaged somehow?

I cannot upload my iMovie video to Facebook, etc. I cannot even attach it to an email, an 'error' message comes up when almost complete. It plays fine in imovies, VLC, mplayerx. Confused, is the file damaged somehow?

The Deskjet series printers connect to wireless networks with what is called USB to Wireless.
You will need a supported operating system to connect a Deskjet to a wireless network. Supported operating systems to connect the printer to a wireless network are Windows 7 (32bit and 64bit), Windows Vista (32bit and 64bit), and Mac OS X (10.5, 10.6, and 10.7).
While there is a software download option for Linux distributions, this is not the full featured software that is capable of adding the printer to a wireless network. Most printers have a wireless setup wizard to accomplish this task, but the Deskjet series printers connect in a different way.
Once the printer is connected to a wireless network, HPLIP 3.12.4 drivers should be able to locate the printer.
Click on Installing the Product Software for a Wireless Network Connection to receive instructions to connect to a wireless network using Windows and Mac operating systems.
Click on Software & Driver Downloads - HP Deskjet 3070A e-All-in-One Printer - B611a to download the appropriate software for a supported operating system to connect to a wireless network.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I made an iMovie, 6.0.3 using music from iTunes and photos from the Internet. It looked fine on iMovie, but when I uploaded it to youtube,some of the photo near the beginning was corrupted.What steps should I take to export iMovie for youtube?

I made an iMovie, 6.0.3 using music from iTunes and photos from the Internet. It looked fine on iMovie, but when I uploaded it to youtube, some of the photo near the beginning were corrupted on youtube. I tried a different photo, and the corruption took place at the same moment of the video. How do I prepare the video for export to get it ready for youtube? I wasn't sure whether to clik web or web streaming. Am I supposed to clik Quick Time after I clik Share?

I unfortunately cannot remember where I got the 'trrndlines' plugin... I assume that it must have been from CFX (as it is located under /Users/Dom/Library/iMovie/Plug-ins/cfx/XXXtrrndlines.bundle).
As for what it does, I also do not know, as I do not think I ever used it in my previous video projects.
At this stage, I think I just need to uninstall it so that iMovie doesnt try to use it.
Do you know how to uninstall a CFX plugin in iMovie?
NOTE: I have re-installed iMovie 6.0.4 (instead of iMovie 6.0.3), but still encounter the same issue.

An app I purchased and downloaded directly to my Ipad is missing and not in my app files on my PC. When I go to the app store to re-download it I can not the says I have already downloaded it. How do I get my app back?

An app I purchased and downloaded directly to my Ipad is missing and not in my app files on my PC. When I go to the app store to re-download it I can not and the app says I have already downloaded it. How do I get my app back?

You should be able to copy it from your iPad to your computer's iTunes via File > Transfer Purchases, or you should be able to re-download it via the Purchased link under Quick Links on the right-hand side of the iTunes Store home page - if that says that it's already downloaded, then that implies that it's already on your computer

Itunes error message "file cannot be found..." I know the file is somewhere since I find it when I do a system search and it plays, but can't get itunes to see it. Any help?

itunes error message "file cannot be found..." I know the file is somewhere since I find it when I do a system search and it plays, but can't get itunes to see it. Any help?

Hello pwithero,
The following article details the process of indicating to iTunes the correct location for the affected file.
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Cheers,
Allen

Plays fine in IMOVIE and IDVD but disk doesn't play right in home DVD Playe

I created a movie in IMovie and it plays fine there. I converted it to IDVD and it plays fine there, but when I burn the actual DVD, it takes 12 hours! and then it won't play on my home DVD player. (It starts out fine, shows the menu and has the movie, but halfway through it freezes. Or if I try to fast forward to skip to the next chapter it freezes.
I tried upgrading my Superdrive to the new Pioneer 111D (it was suggested to me that my older 103 was not compatible with Panther) and still the same problem.
I am noticing now that when I go to check my system profiler, it's now saying for the new Pioneer 111D that "disc burning is NOT supported".
I'm in the midst of a project and feeling pretty screwed. HELP!

First of all, I'm appreciating all the responses and help. This is a serious concern for me which I need to find a solution for asap.
As far as the media itself... the discs are TDK DVD- and I've ruined about 4 or 5 of them... each having the same problem...taking 12 hours to burn they play for awhile on a commercial DVD player then freezes up about 2/3rds the way through (unless you try to scan through, in which case it freezes up on the spot.) There are a total of 3 scenes... and the 3rd scene doesn't happen at all in the final burned disc. So, J.Keller, as much as I'd love to blame the media I don't think I can. But it's certainly a reasonable explanation.
Karsten, I have to tell you the thought that it might actually take LONGER to butn this disc is painful. It's actually only 45 minutes or so of material. But if I knew that it would take 24 hours but it would work perfectly I'd go for it! I will download the patch you recommend to see if it offers a workaround solution.
But I'm still perplexed that in the SYSTEM PROFILER for the Pioneer 111D it says that "burning is NOT supported". Should I be concerned about this?
At this point I'll try just about anything. So if J Keller thinks that by waving a dead chicken over my head while singing dixie would help create a workable DVD so I can finish this project for my boss, I'd give it a try.
Any other thoughts? I really appreciating the insights and suggestions.

I have completed a song on the GarageBand app which plays fine. I export it via email and it opens up in iTunes on my PC fine but when you play it there is no sound from the file. Anyone know I am doing wrong please?

I have completed a song on the GarageBand app which plays fine. I export it via email and it opens up in iTunes on my PC fine but when you play it there is no sound from the file. Anyone know I am doing wrong please?

you might need codecs on you pc. i find vlc player and codecs is perfect for music and videos.

One of my audio books will not play. My music plays. And my other audio book plays. When I try a listen "the singularity is near", It does nothing. I try and move he cursor to the middle of the track and hit play, but it moves back to the beginning.

One of my audio books will not play. My music plays. And my other audio book plays. When I try a listen "the singularity is near", It does nothing. I try and move he cursor to the middle of the track and hit play, but it moves back to the beginning, and still does play. How do you report a problem with a mandatory apple app?

Audiobooks purchased from Audible.com. They play on iTunes on my computer. They have been playing on my iPod Classic until two days ago. I'm in the middle of two books and now one does not keep track of where I am and the other does not play. I also have other books not playing on the iPod that use to play. They all play on iTunes on my computer.

I can't read acsm files on my e-reader after transferring them from the pc with ADE. it seems to work, but then when I try to open the files on the e-reader it says "open failure". what's wrong?

I can't read acsm files on my e-reader after transferring them from the pc with ADE. it seems to work, but then when I try to open the files on the e-reader it says "open failure". what's wrong?

The acsm file is not the book, it is a ticket to get the book. I sometimes get library books online, here is what I do.
1. Start ADE on the computer
2. Go to library website and find the book I want to download.
3. Click on the download link
4. In windows 7 a box opens asking whether I want to open( or run) or save the acsm file
5. Click open/run and ADE downloads the book into the "Library"
6. Transfer the book (epub file) to the reader.

I SET UP THE HOME SHARING ON MY COMPUTER, AND i CAN STREAM MY PHOTOS AND SEE ALL THE VIDEOS AND LISTEN SONGS IN MY ITUNES, BUT CAN NOT DO HOME SHARING, ON THE TV, ALWAYS SHOWS "TURN ON HOME SHARING ON YOUR OMPUTER WITH YOUR ID WHICH I DID BUT NOTHING HELP

I just bought my apple tv yesterday and SET UP THE HOME SHARING ON MY COMPUTER, I CAN STREAM MY PHOTOS AND SEE ALL THE VIDEOS AND LISTEN SONGS IN MY ITUNES, BUT CAN NOT DO HOME SHARING, ON THE TV, ALWAYS SHOWS "TURN ON HOME SHARING ON YOUR OMPUTER WITH YOUR ID WHICH I DID BUT NOTHING HAPPEN. WHAT'S WRONG? WHAT SHALL I DO NOW?

I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem. The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6. (So maybe double check you have IPV6 turned off)
So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time!

ICloud password works on everything but erasing all data. I got a new iPhone and need to wipe this one but am not sure how else to do this since the password is not working. Any suggestions?

iCloud password works on everything but erasing all data. I got a new iPhone and need to wipe this one but am not sure how else to do this since the password is not working. Any suggestions?

Firefox also makes regular backups of your bookmarks in a folder named bookmarkbackups in your personal settings folder. You can restore the backup to your new Firefox, but unlike importing the HTML-format file, it is a complete drop-in replacement, so if you have saved new bookmarks you do not want to lose, the export/import method may work better for you.
By default, Windows hides your personal settings folder so the easiest way to access it is from inside Firefox. You can use either:
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button. This will launch a window showing your Firefox settings files.
You might want to back up this whole folder if you have other data you want to preserve from your XP computer.
Either way, you should find the bookmarkbackups folder here and when you click into it, find maybe 10 files with dates in their names.
The procedure to restore the file once you have it on removable media or some other convenient place is described in this article: [[Restore bookmarks from backup or move them to another computer]].
Regarding the other files and what you might find of use: [[Recovering important data from an old profile]].

TS2289 Audio in iMovie 11 files but missing in sections when shared to iDVD. The movie and audio plays fine in iMovie but my burned iDVD movie is missing some audio .

Similar Messages

Maybe you are looking for