TS2326 I haf updated my Iphon4 with ISO 6.1.3 but I got Problem receiving SMS messages not matching a contact's mobile number

Hi guys, I really need help on that problem,

Summary: Incoming calls show up only as phone numbers, not with the caller's name.
Steps to Reproduce:
1) On your iPhone, save a person's phone number in Contacts with the country's dialing code in front (+ZZZ-XX-YYYYYYY, where +ZZZ is the country code, XX is the carrier, YYYYYYY is the person's phone number);
2) Make a call from that person's device/number to your iPhone;
3) On your iPhone, while ringing, shows the above number without +ZZZ and without the person's name.
Expected Results: No matter how the number is saved (as +ZZZ-XX-YYYYYYY or simply as XX-YYYYYYY) the caller ID should always show up, as in previous iOS editions.
Actual Results: Caller ID does not work as expected and as in previous iOS versions.
Notes: When I receive voice calls, the number comes in without the country dialing code in front, simply appears as XX-YYYYYYY (where the XX is the carrier code and YY is the number) and the caller's name does not appear. In my address book ALL my contact's telephone numbers are preceded with the corresponding country dialing code, because i travel a lot. If I delete the country code from a contact's phone number, and that number calls me, then the person's name appears. I'm am in Angola (country code +244) using iPhone 4, iOS 5, carrier: UNITEL (92)
On the other hand, SMS's are OK, i.e. the Caller ID is linked to the phone number and shows up (because SMS's are receiver with the country dialing code in front of the phone number, p.ex. +244-XX-YYYYYYY).
It has something to do with the Carrier Settings Update as in iTunes i get the error message 1630 which states that: "iTunes could not check for un update to the carrier for your iPhone. An unknown error occured (1630)."
Thanks

Similar Messages

  • Installed itunes, checked in, I try to download free applications out the window: this Apple ID has not yet been used with the iTunes Store. But the mail I receive, that I'm registered, and I have an Apple ID, please help find out!

    installed itunes, checked in, I try to download free applications out the window: this Apple ID has not yet been used with the iTunes Store. But the mail I receive, that I'm registered, and I have an Apple ID, please help find out!

    Diana,
    This could be a delay while internal service records were updated. Check it out again - is it okay for now?

  • My screen opened, and with every click the page (letters/images) got bigger. I can not get it to return to normal image size. I have to use the slide bar to read across the page. What do i do to correct it back to normal size???

    Question
    My screen opened, and with every click the page (letters/images) got bigger. I can not get it to return to normal image size. I have to use the slide bar to read across the page. What do i do to correct it back to normal size???

    Hi jholzworth,
    It sounds like you might have accidentally hit the zoom button. Try hitting ''CTRL + 0'' to return it to normal size. Just so you are aware, ''CTRL'' and ''+'' will zoom in and ''CTRL'' and ''-'' will zoom out.
    Hopefully this helps!

  • I live in an area with a weak telephone signal so when I send an SMS message I have to 'Try Again'. What option do I set to automatically try again?

    I live in an area with a weak telephone signal so when I send an SMS message I have to 'Try Again'. What option do I set to automatically try again?

    I'm unaware of this type of option. Unfortunately you are going to have to keep doing it manually.

  • I used to use SpeedBit Video Downloader with Mozilla Firefox, but suddenly a problem happened, I can not download with it now at all as there is an code error appears in the bar of SpeedBit like "XML Parsing Error: unclosed token Location: chrome://browse

    I used to use SpeedBit Video Downloader with Mozilla Firefox, but suddenly a problem happened, I can not download with it now at all as there is an code error appears in the bar of SpeedBit like "XML Parsing Error: unclosed token Location: chrome://browser/content/browser.xul Line Number 1, column 8702:....................."
    I did evrey thing, but the same problem
    reinstall SpeedBit, reinstall Mozilla Firefox.
    So what can I do!
    == This happened ==
    Every time Firefox opened
    == 4 days ago

    look people, i may have a solution for this. This happened to me a few times before and resolved alone, but last time it happened was when i turned off my router and back on while my comp was running and appeared when i tried opening firefox after that. so wat i did was i shutdown the computer and the router and tried turning both on again, and it resolved.
    Therefore, Summary: Shutdown computer then turnoff router then turn both back on
    Hope this helps anyone.

  • Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. Is anyone else having any similar issues?

    Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. It seems to be only this one person affected by this issue, everyone else that I've tried sending messages to has responded with no trouble. Is anyone else having any similar issues?

    Retrohacker, Your text messages are too important to be missed! Let's figure this out, together. Are you able to successfully make and receive calls from your friend? Which phone do you have with us? Any new messaging applications or changes that you can recall on the phone since this issue began? Please share details so we can get to the bottom of this for you.  TanishaS1_VZW Follow us on Twitter @VZWSupport  If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What I can do?

    Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What  can I do?

    Try booting to the Recovery drive, running Disk Utility and Repair disk and Repair Permissions.
    1. Reboot and immediately hold down command and R (two keys).
    2. When you see the screen shown on this page, select Disk Utility and continue.
    3. When DU is running, select the hard drove on the left, First Aid and Repair Disk.
    4. After Repair Disk, click Repair Permissions.
    Quit DU and restart.

  • HT201209 To create an iTunes account with a gift card, I receive this message at the end: Contact iTunes support to complete your transaction. What the **** is it?

    To create an iTunes account with a gift card, I receive this message at the end: Contact iTunes support to complete your transaction. And then, nothing! What the **** is it?

    It means contact itunes support

  • Cannot delete email.  Selected edit. Selected email and red circle with white check appears.  BUT, options at bottom of screen do not appear.  Help.

    Cannot delete email.  Selected edit.  Selected email and red circle with white check apprears.  BUT, options at borrom of screen DO NOT APPEAR.  I just get a grey band across he bottom of the screen.

    Correction: the "Move" button is blue, not green.

  • HT4245 can somebody tell me what to do with my iMessage in Ipad 2? before i can send message tru iMessage from my contacts who is having the same applications, for the existing one, i can send message but if i want to send message from a new contact, not

    can somebody tell me what to do with my iMessage in Ipad 2? before i can send message tru iMessage from my contacts who is having the same applications, for the existing one, i can send message but if i want to send message from a new contact, its not working....

    Please Rephrase your query.

  • Update contact person mobile number

    Hi Experts,
    I need your help to solve this issue. Here when I am trying to update the contact person mobile number it is not getting updated. For example when I entered the mobile number in mobile field and hit enter number got disappeared. Please suggest.
    Thanks
    R@adi

    Hello,
    Please implement the note 1837639.
    Thanks,
    Best regards,
    Julin

  • Since updating my iphone with ISO 6.0 I haven't been able to load any apps to my phone,

    Since updating my iphone 4 with ISO 6.0, I haven't been able to load any apps.
    When I go to install app I'm asked for my password which I enter and then press go and
    it looks like it is going to load then switches back to the app I'm trying to load and then
    I'm back where I started. I have tried more than ten times, I have even changed my password
    on Apple ID.
    Can anybody help?
    Kind Regards
    Donald

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]

  • Just started MobileMe.  Struggled with the setup of iCal but eventually got everything working fine for about a day.  Then I started receiving an iCal error message stating that the URL was wrong.  Of course, sync no longer works.  What is correct URL?

    Just signed up for MobileMe.  Had a little difficulty setting up iCal but eventually got everything working.  Whether posting to iCal on my Mac Book or iPhone, sync seemed to be working fine for about a day.  Then suddenly when I opened iCal on my Mac Book, I would receive the following iCal error message:
    "The calendar https://cal.me.com/calendar/calendar/principals/users/1.1117025442/ was not found on the server. Make sure the URL is correct."  I know where it is located but because I did not enter the URL when I set up MobileMe/iCal, I don't know what the correct URL should be.

    Mike,
    Welcome to Apple Support Communites.
    Review; MobileMe: Setting up iCal for the new MobileMe Calendar, and post back with further questions.

  • I can make calls with my MBP on FaceTime but i can't receive calls!!

    Hi
    I have a problem, I have a MBP with OS X Yosemite and an Iphone 6+ with IOS 8.1 .
    i set them to use handoff and FaceTime to call and receive calls from my Mac.
    IMessage works great, Handoff too, i can call using FaceTime,  everything works good but only one problem: when i receive a call, i don't get any notification on my MBP.
    Anybody can help me on this?

    I fixed it by setting Time Zone in automatically in both iphone and MBC
    From the Apple () menu, choose System Preferences > Date & Time > Date & Time.
    Enable "Set Automatically".
    Click the Time Zone tab and confirm the closest city is correct.
    do the same in the iphone and it will work 

  • Issue with only one client - The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed.

    Below issue is with only one client in that untrusted domain. So boundary is not the issue.
    Env -
    mydom.com has SCCM PRI site (MP, DP as well).
    Client is in untrusted forest.
    Please help.
    Thanks
    MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteCode:         pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteVersion:      5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message body '<ContentLocationRequest SchemaVersion="1.00">
      <AssignedSite SiteCode="pri"/>
      <ClientPackage/>
      <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
    UseInternetDP="0">
        <ADSite Name="Default-First-Site-Name"/>
        <Forest Name="staging.local"/>
        <Domain Name="staging.local"/>
        <IPAddresses>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
        </IPAddresses>
      </ClientLocationInfo>
    </ContentLocationRequest>
    ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
    Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Received header '<Msg SchemaVersion="1.1">
     <ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
     <SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
     <SourceHost>pri1SCCM02</SourceHost>
     <TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
     <ReplyTo>MP_LocationManager</ReplyTo>
     <CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
     <Priority>3</Priority>
     <Timeout>600</Timeout>
     <TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
    Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
    Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
    PM 4816 (0x12D0)
    Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
    SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
    Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
    Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
    Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
    MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
    ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000.  The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    A Fallback Status Point has not been specified.  Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)

    Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
    That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
    This line jumps out at me in the log file though: "An MP exists on this machine".
    That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
    Jason | http://blog.configmgrftw.com | @jasonsandys

Maybe you are looking for

  • Elements 12 does not refresh on Win7 AMD FirePro M6100

    I installed Elements 12 on a new Windows 7 laptop with an AMD FirePro M6100 adapter. When I try to move the Premiere window the only thing that shows movement is the bottom section that has "Undo... Redo... Organizer... etc." If I drag another window

  • Transport ack in the file adapter

    I have gone through the blog /people/michal.krawczyk2/blog/2006/06/22/xi-playing-with-the-file-adapters-acknowledgments and i understand the functionality of the transport ack in the async send step.. what i want to know is there a way to do processi

  • SQL Loader:  Is it possible to set a variable?

    Hallo All, I am loading data with SQL Loader and find that I can set particular fields to particular values using 'CONSTANT'. That's great. However, I am loading multiple files into the same format and so would like to 'label' each load. This would b

  • Multi Display config possible with HD Cinema Displays?????

    Hello Everyone, Not sure if anyone has asked this question before. I searched it here and didn't find anything. Anyway is it possible to remove the display stand that is attached to a 24" HD Cinema Display and mount it to another stand that is capabl

  • Profile Loggin issue.

    *** NEWBE *** Hi All, We have been getting errors on our Win2K8 server which are causing problems and are getting worse. It is taking an age to login and we are getting Alerts and Event log errors - see below. appw: wlclntfy (warning) (0) (6005) : th