TS2446 Forgot screen password for ipod

How can I log into ipod when I have forgot the password on screen - the four numbers password? Please help as it keeps getting disabling the ipod and I cannot log in. The message in the end said connect to itunes but still cannot access my ipod

You may need to put the iPod into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPod via your computer's iTunes and then restore (if you have a backup) or resync your content to it.

Similar Messages

  • Forgot screen password for my Ipad.

    I forgot the screen password for my Ipad 2 and my daugther kept trying to guess it so there is a 1 hour wait when I enter the wrong password

    If you have a passcode to the screen lock that you've forgotten, restore the iPad from the computer to which the iPad is synced. For information and instructions, see:
    http://support.apple.com/kb/ht1212
    If that will not work, you'll need to put the iPad into Recovery Mode and then try the Restore again:
    http://support.apple.com/kb/ht1808
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • Forgot my password for lock screen, what should I do?

    Forgot my password for the lock screen, what should i do?

    Connect the iPod to your computer and restore via iTunes.  If iTunes asks for the passcode and you can't enter the passcode, place the iPod in recovery mode and then restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • HT1212 forgot my password for my ipod now it says its disabled

    forgot my password for my ipod now its saying its disabled what can i do

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    2. iOS- Forgotten passcode or device disabled after entering wrong passcode
    3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    4. iOS- Understanding passcodes
    5. What to Do If You've Forgotten Your iPhone's Passcode
    6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
    7. Restoring iPod touch after forgotten passcode
    8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
    Forgotten Restrictions Passcode Help
    1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
        If this method does not work, then you will need to fully Restore your
        device as New
    Also, see iTunes- Restoring iOS software.

  • I have forgot my password for my lock screen what can i do to get on it?

    i have forgot my password for my lock screen, and it now says connect to iTunes but it isnt connecting i want to know how to get it on?

    2 options
    1. restore it to a backup you took before you put a password on
    2. restore it to factory settings if there was a work around then the whole password thing would be rather pointless and security would be absent

  • HT2045 I forgot my password for my ipod touch 2 gen is there a way i can unlock it ?

    I forgot my password for my ipod touch 2nd gen is there a way i can unlock it?

    Connect the iPod to your computer and restore via iTunes. Place the iPod in Recovery mode if necessary to allow the restore.

  • I forgot the password for my ipod

    i forgot the password for my ipod. What do i do?

    In the absence of any more information:
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode

  • HT201263 forgot password for ipod

    My daughter forgot her password for her ipod and now can not use it.  What can i do?

    Options for when an iOS device gets locked because of forgotten passcode:
    Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
    iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
    If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
    iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)

  • I forgot my password for my ipod and tried to restore it now it wont turn on. what do i do?

    i forgot my password for my ipod and tried to restore it now it wont turn on. not sure what to do. HELP?

    The first way you can connect the iPod to the computer it was originally configured on, and open iTunes. When you disconnect iPod from the computer, it will no longer be locked. You then can go into the preferences and turn off the lock. If you don’t have access to the original computer or it just does not work, you can jump to the second method. The best fix for any iPod problem is the classic “restore your iPod to factory settings.” That this will erase all data on your iPod and take you back to day one, but you can just add your music and data back to iPod from iTunes. This is the true benefit of the iPod / iTunes relationship.

  • My daughter forgot her password for her iPod and I want to know how to reset it. Thanks

    Help I need to recover password for iPod touch.

    Connect the iPod to its syncing computer and restore from backup.  If it asks for the unknow passcode place the iPod in recovery mode and restore it.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • I forgot my password for my iphone 4 and it is now disabled. I am trying to restore it through itunes, but it say I have to put my passcode into my phone first. Is there a way to restore without using my passcode?

    I forgot my password for my iphone 4 and it is now disabled. I am trying to restore it through itunes, but it say I have to put my passcode into my phone first. Is there a way to restore without using my passcode?

    The instructions are in that link. Just follow them VERY CAREFULLY. Especially the part about:
    Turn off your device and leave it off.
    Plug in your device's USB cable to a computer with iTunes. [but DON'T connect it to the iPhone yet]
    Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
    When you see the iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
    When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
    Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.

  • HT1212 i forgot my password to ipod touch and is locked

    i forgot my password to ipod touch and is locked

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • HT1212 hi i forgot my password for my ipad and its disable

    hi i forgot my password for my ipad2 and now its disable

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • I forgot the password for my i pad

    i forgot the password for my i pad

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
    A Complete Guide to Recover Your iDevice if You Forget Your Passcode
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • I forgot the password for the security copie, what can i do?

    i forgot the password for the security copie, what can i do?

    Unlocking iPod
    You can unlock iPod in one of two ways:
    * Enter the combination on iPod using the same controls you used to set the combination. If you do not enter the correct combination, the digits onscreen flash red. When you enter the combination correctly, iPod will unlock and return you to the last viewed screen.
    * Connect iPod to the primary computer you use it with (the first one iPod synced with), and open iTunes. When you disconnect iPod from the computer, it will no longer be locked.
    If you can't unlock iPod using either of these methods, you can restore your iPod to factory settings. Please note that this will erase all data on your iPod. Afterwards, you can add your music and data back to iPod.
    If you want to change the primary computer that your iPod is associated with, do this:
    1. Restore your iPod. Warning: The restore process cannot be undone. All of your songs and files will be deleted. Always make a backup of your important data.
    2. Connect your iPod to the computer that you want to be the primary computer.
    3. Open iTunes and synchronize.

Maybe you are looking for

  • How to determine a sql query size to display a progress bar

    I would like to show a progress of an sql query within a jsp page. Background: I have a reporting web application, where over 500 contacts can run reports based on different criteria such as date range.... I current display a message stating 'executn

  • Acrobat XI Pro automatically closes itself with no messages etc. after few seconds

    Greetings all, I don't know why but my Acrobat XI Pro (11.0.0) automatically closes itself (with no warning, no messages etc.) after few seconds. I installed the AXI as a part of the CS6 Master Collection on my Windows 8 (x64) laptop. Just as suggest

  • Can't get to my control center on my ipad

    I can't get to the screen that will let me maneuver to nettflex or utube or what ever.  It takes me to my itones instead.s

  • Changing HD on macbook

    Three questions: 1. I am thinking of upgrading my 60gig HD that my MacBook came with to 80 possibly even 120 Gig. I think it allows the user to change the HD without voiding the warranty, am I right? 2. How do I switch HD without loosing my data. In

  • Got new imac g5- NO APPLEWORKS!

    I got my IMAC yesterday but there is no appleworks. I have Office 2004 Microsoft word test application. What do I do? Do you have to download appleworks from somewhere? I looked everywhere!