TS2510 problem with soundtrack pro v2.0.2 under snow leopard

Hi, I've just upgraded my mac book to snow leopard and now when I try to record something with soundtrack pro v2.0.2 through the line input jack, the internal microphone is still switched on and none of the preferences allow me to switch to the input jack,ks
Does anyone know whether STP v2.0.2 will run ok under snow leopard? If I need to upgrade the drivers, does anyone know where I can find these and how to instal them.
Many thanks.

There are no "drivers".
Use Audio MIDI Setup to set your audio input.
Good luck.
x

Similar Messages

  • Problem with Backup 3 (3.1.2) under Snow Leopard

    Okay so I use Apple's Backup 3.1.2 which is free to all .Mac members as you know to back up all of my Macs to a NAS (networked drive). Anyway, under Snow Leopard this stops working. When you try to tell it to save the back ups on a mapped or mounted network drive it will not let you choose it and defaults back to the Macintosh HD. Under Leopard it had no problem doing this. What is interesting is that if I reinstall Backup 3 it will start to work and allow me to save to the network drive but as soon as Backup tries to do its backup by it self AND if the network drive is not mounted for some reason (has to be mounted manually), BackUp breaks the save point with the NAS and you can not tell it to save to the NAS again. As you also probably know everytime you restart your mac all the mounted network drives are not connected until you manually open them your selves. Under Leopard Backup would actually say "Waiting for Christian_BackUp" until I would open it and then it would start the backup automatically. Please help me get this working...I can not use Time Machine because I need a smooth, reliable, and working way to back up to a NAS.
    Thanks for your help in advance!
    PS: I have confirmed this problem on three macs all running Snow Leopard with different NAS setups.

    Whenever I put my Mac to sleep Backup 3.1.2 stops running scheduled backups to my iDisk automatically. This behavior started only after I installed Snow Leopard. They always ran just fine under Leopard whether I had put my iMac into sleep mode or not. If I reboot now and never put my computer into a "hard" sleep the automatic backups work fine, but as soon as I manually select "Sleep" mode the automatic backups stop happening even if the computer is awake when the backups are scheduled to occur.
    Message was edited by: Joseph Snodgrass

  • Problems with wireless mouse/keyboard after upgrade to snow leopard

    Hi!
    I am wondering if someone has some insight for me.  I recently upgraded to Snow Leopard from Tiger. I have been using a Logitech S 530 wireless keyboard/mouse combo for a few years.  I am now having problems with them irratically.
    1. When on line and the page is large, I often cannot move the blue bar at the bottom of the screen to scroll to the right. What happens is like a stutter; as I am dragging the bar, it and the page shake rapidly side-to-side. Sometimes, I can drag it to the right, but as soon as I let go, it snaps back to the left.  This does not happen in Word.
    2. When in boxes with dropdown options, only occasionally does that happen.  The dropdown either doesn't show, or it flashes quickly.  Sometimes it will work after clicking many times. This happens with dropdown menus as well as search boxes that have dropdown choices for previous searches or suggested searches a la Google.
    3. When I use my function key or mouse to display all windows, I can't choose the one I want.  Regardless of which one I put my cursor over, only the left-most one is highlighted and comes to the front when I click.
    4. There is a varying lag. Sometimes the system is responsive, and other times there is a lag of varying lengths before the system responds to the mouse action (click, drag, zoom, etc.)
    5. For a while, my left mouse button wouldn't work.  I reconfigured it, that seems to have done the trick.
    6. Today, I can't open any of the menu items on Firefox.  I can move the cursor there, but when I click on any of them, nothing happens. This is okay in Safari.
    I have disconnected and reconnected the usb, restarted the computer, and tried to reinstall the software for the mouse and keybord. When I did that, I got a message saying it couldn't install on the current OS, so I went to Logitech and dowloaded and installed the latest version (which indicated it is for OS X 10.6.8.)
    I don't know if this is a Snow Leopard problem, but it started sometime after I upgraded.  Thanks in advance for any help!
    Donna

    Update all your third party software  or uninstall and reinstall 10.6 versions.
    If your going to 10.7, be warned a lot of software will not work at all and your 10.5 era machine will be slow, perhaps even have problems as 10.7 is problematic on older hardware.
    http://roaringapps.com/apps:table
    IMO save for a new 10.8 machine after this summer.
    See #1-15 here, tune yourself up good.
     Step by Step to fix your Mac

  • Using iCloud with MacBook Pro from 2006, running iOS Snow Leopard 10.6.8

    I have an old MacBook Pro (from 2006) running OS X Snow Leopard ver. 10.6.8.  I wanted to use MobileMe or iCloud to store content, but I have run into a problem.  iCloud needs version 10.7.5 or higher, but I can't seem to find a way to upgrade from my version to that version.  The free OS X Mavericks upgrade requires newer hardward.  I can't find a way to upgrade to Lion or any version - I keep getting into a support page loop.

    You need to call Apple to purchase Lion or Mountain Lion.

  • Problem with Connecting to VPN after migrated to snow leopard

    Hi,
    I recently migrated to Snow Leopard server, I have a strange issue when connecting to the VPN Server.
    Please find the below error.
    Fri Jan 1 14:38:22 2010 : CHAP peer authentication succeeded for jasmine
    Fri Jan 1 14:38:22 2010 : DSAccessControl plugin: User 'jasmine' authorized for access
    Fri Jan 1 14:38:22 2010 : MPPE required, but keys are not available. Possible plugin problem?
    Fri Jan 1 14:38:22 2010 : sent LCP TermReq id=0x2 \"MPPE required but not available\"
    Fri Jan 1 14:38:22 2010 : Connection terminated.
    Fri Jan 1 14:38:22 2010 : Connect time 0.0 minutes.
    Fri Jan 1 14:38:22 2010 : Sent 0 bytes, received 0 bytes.
    Fri Jan 1 14:38:22 2010 : PPTP disconnecting...
    Fri Jan 1 14:38:22 2010 : PPTP disconnected
    2010-01-01 14:38:22 IST --> Client with address = 192.168.1.76 has hungup
    Please let me know what is the cause and how can i fix it.
    Thanks,
    Gulab Pasha

    More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
    http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
    http://captaindbg.com/how-to-update-drivers-on-windows-7/   (works on win 8 too)
    Wanikiya and Dyami--Team Zigzag

  • Problem with opening .wmv files in QuickTime since Snow Leopard upgrade

    Until upgrading to Snow Leopard any .wmv files would open automatically in QT when double clicked.
    I now get an error message which says "QuickTime Player must be installed to run this application".
    I can open the file by launching QT(pro) and opening it from within the player - kind of a long way round.
    Any suggestions what the fix might be would be gratefully received
    Thanks

    Hi,
    try upgrading your Flip4mac plugin to the new Beta version which supports Snow Leopard.
    Regards

  • Problems with Mobile Me System Preferences after installing Snow Leopard

    I installed Snow Leopard yesterday, and noticed that my calendar was no longer syncing between my mac and my iphone. I opened the system preferences/mobile me pane and my .mac account came up, but when I tried to hit the "sync" pane it just froze. It did this repeatedly. I trashed the system preferences file and tried again, with the same result.
    Any ideas? I'd really like my calendars to continue syncing across devices.

    I had same issue, this cured it for me...
    - Open MobileMe in System Preferences
    - Click Advanced
    - Click Reset Sync Data
    - Select Calendar from drop down menu/pop up list
    - (In my case I changed the arrow, to copy all calendar events from my mac to mobileme)
    This resets the data in mobile me.
    After this the sync function worked as normal & my iPhone syncing was ok as well...
    Hope this helps

  • Problems with Aperture after upgrading from Tiger to Snow Leopard

    Help!  I recently upgraded my IMac operating system from Tiger to Snow Leopard.  Now, I am finding my aperture is not responding the way it used to.  I cannot change the border dimensions; I can't print.  Any suggestions would be appreciated.  I was told by Apple Technical Support that they will not provide support for Aperture 2 and that I would have to upgrade to Aperture 3.  Is this correct? 

    This is called a Kernel panic.
    See here for possible solutions:
    http://support.apple.com/kb/TS3742
    Did you do anything else apart from ungrading OS?
    Did you add memory?
    Bad or not well seated memory modules are often a cause of kernel panic

  • Tascam US-144mkII Causing Problems in Soundtrack Pro 3.0.1

    Just got a Tascam US-144mkII, as recommended by the Apple site, to use with Soundtrack Pro 3. So far, though, it's causing a problem - while I can hear audio that I'm playing and I can monitor that sound through the Tascam, the cursor won't move when I record and if I try to play any loops, I get an error - a CNSExceptionWrarpper?. If I unplug the Tascam, everything works fine.
    I'm using the latest driver - 2.0.
    Any suggestions on how I can get this thing working would be greatly appreciated...

    You're right. It wasn't recommended. I should've said it is supported.
    http://www.apple.com/finalcutstudio/resources/supportdevices.php#results
    Anyone with any suggestions, I'd still love some insight into this.

  • Hello  I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out?  thanks

    Hello  I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out?  thanks

    Refer below link once
    App doesn’t open | Progress wheel spins continually

  • Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and f

    Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and further more) stops installation and shows Installation ERROR: ASU has quit unexpectedly, Media DB Error: 18. Please help!

    run the cleaner and retry installing per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Does anyone still have problems with Premier Pro on Maverick? and is there any known fix?

    Does anyone still have problems with Premier Pro on Maverick? and is there any known fix?

    I know OSX 10.9 Mavericks introduced a power saving feature called App Nap which is meant to slow down applications that it determins are inactive (or when minimized). This would mostly likely cause problems if you're dynamically linking After Effects comps to your timeline or sometimes exporting to Media Encoder.
    Try disabling App Nap for all your Adobe App files...
    Go to your Applications folder
    Go into individual Adobe app folders (ie. Adobe Premiere Pro CC)
    Right-click on the Adobe app file (ie. Adobe Premiere Pro CC.app) and select Get Info
    When the info window opens up, add a checkmark beside "Prevent App Nap"
    Restart the application
    This fixed all my performance issues.
    -Pete

  • HI, I just bought Photoshop CS5 and I have a problem with HDR pro

    HI, I just bought Photoshop CS5 and I have a problem with HDR pro . when I am trying to mount 3 images together it act in a strange way ( the images appear and disappear many times) then when the window with the result appear and I say ok it open up in photoshop as a single image ( in the layers there is just 1 photo) and when I am trying to work it up with the Plug in/filter HDR Effex Pro (Nik softwear) a pop up window appear saying that the file is missing and the operation it is not possible. Why and what is happening ? Someone can help me ?

    This is normal operation. The output from HDR pro does not produce a layered file. You make all your adjustments in the Nik Plug-in. Once Nik has finished you then make any rinal changes in Photoshop. Trying to use NIK again on the image in Photoshop is not the way to do this.
    When HDR pro comes up do you see all the presets and controls? Presets on the left and controls on the right
    MK

  • I have a problem with macbook pro OS 10.5.8 and cannot play youtube anymore, before Yes

    i have a problem with macbook pro mac os 10.5.8 and cannot play youtube but before ther is no problem abou this. now there is warning sign to install adobe flash player, but when i install adobe it said cannot be compatible, and I went to the apple store, they sid need to upgrade the system to mac IOS 10.6 and i dont want to spend much... somebody to help me this

    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading from Snow Leopard to Lion or Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    This, Adobe Flash Player 12.0.0.70, is the current version of Flash. It should work with Snow Leopard or later.

  • We have 'CS6' version of Adobe. We are facing a problem with 'Acrobat Pro'. Every month that is stop working and everytime need to install. Kindly help us regarding solving this problem...

    We have 'CS6' version of Adobe. We are facing a problem with 'Acrobat Pro'. Every month that is stop working and everytime need to install. Kindly help us regarding solving this problem...

    Your Acrobat is running in Trial Mode.  Try this KB: Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
    If it doesn't work you need to contact Adobe Support for assistance.

Maybe you are looking for