TS2518 Where has the White Balance Setting Temp K gone? I only have a slider "warmth" left...

I just upgraded to Aperture 3.3.1 and the setting to set the white balance to a certain temperature in K has gone...
This is how it used to look:
http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=18%26se ction=8%26tasks=true
but now only a setting called "warmth" with a slider and a default setting of "0,50" is left...
best
Gregor

Set the drop-down selector in the ""White Balance" brick to "Temperature & Tint". Then you can set again a color temperature.
Regards
Léonie

Similar Messages

The area on my toolbar where you can change the white balance mode is now gone from my toolbar. How can I get it back?

The area on my toolbar where you can change the white balance mode is now gone form my toolbar. How can I get it back?

Your basic panel must have been accidentally deselected.
Simply right-click on one of the other panels e.g. Tone Curve and choose basic again - see image below.
You can also select solo mode, if you prefer to work in one panel at a time with the others collapsing automatically when you click on another tab.

Where is the white balance adjustment?

The iPhoto app provided an adjustment for white balance, if Photos in ios8 is a major update and replaces iPhoto, where do I find the white balance adjustment?

Do you just have to eyeball the correct adjustment rather than have it done autmatically?

Where has the Blending option of Premiere CS3 gone ?

In older version of Premiere, just like in Photoshop, there was the blending option for 2 layers of video, such as overlay, screen, lighten, etc.
But now in Premiere CS3, I can't find this blending option. Where is this option located in ? Or any better substitues have taken its place ?
Thanks in advance for your answer.
Best Regards
jusko

Thanks Jeff for your reply.
As far as I can remember, in the Transparency setup of Effect Control of version 6.x, there were some blending option such as screen, multiply, luminance, etc. But of course the options were not as many as that in Photoshop. The screen and multiply effects are very useful and frequently used. In CS3, I think the Opacity effect is equivalent to the Transparency effect of versions 6.x. But there is no setup in Opacity effect.
I'll have a look at the Calculations effect.
Thanks again Jeff.

HT5035 Where has the account balance gone?

No it is not next to my user name at the bottom of the featured page of iTunes, App Store or iBooks, yes I am signed in. Frustrating.

Hi Hunter,
I'm not sure where else you can go to check it. Hate to do this, but you are probably going to want to contact iTunes Support:
iTunes Support WorldWide
I know what you mean, though. About a month ago, I could have sworn I had a balance left in my iTunes account. But - nothing there. I purchased another gift card for myself just to make sure the amount was showing - it did.
Then I went to my Purchase History and my emails, and discovered that I actually had depleted the previous amount.....kind of makes you crazy, though!
GB

Where has the Calendars, Contacts check boxes page gone in iTunes 11.1.2

Since the new update with Maverick, the page has gone so my ipad isn't syncing Calendars and its Contacts have been deleted. I back up to computer and not ICloud

Couldn't agree more.
Typical Apple "Here's a free update to Mavericks but we're not going to tell you that it mucks up syncing contacts via mac" they just let you find out the hard way, after you have a problem perhaps.
I did notice in iTunes there was a tab missing but didn't realise what it was till my son had a problem getting back his contacts as he's not on the cloud.
What else I wonder will just not appear when required.

Where has the trial version of iWork 08 gone?

When iWork 08 came out, I downloaded the trial version of the software. Then, I bought a Serial Key Number. So far so good.
Recently, I wanted to install iWork on another Macbook, but lost the original
pkg or dmg (not sure which one it was). So I tried to download the trial version again and unlock it with the already bought key.
But on the site
http://www.apple.com/iwork/trial/
there is no link to the software anymore.
Where did it gone?

The link is right there with the graphic taking up the upper left of the page.

Where has the side scroll bar for iTunes gone now that I have updated it?

Is there any way to change back to a layout similar to before the new 11.0.1.12 ?

to get the side bar back press CTRL+S

Where has the option to 'bookmark all tabs' gone?

......

Some menu entries in the main menu bar are hidden if you use the mouse and only appear if you use the keyboard to open the menu (Bug 626825).
You can see the difference if you use Alt+F to open the File menu or other menus like the Edit menu (Alt+E) and Bookmarks menu (Alt+B) and compare that to what you see if you use the mouse to open the menu after you have made the menu bar visible by tapping Alt or by pressing F10.
* "Bookmark All Tabs" (Shift+Ctrl+D) no longer shows in the Bookmarks menu unless you open the Bookmarks menu via the keyboard (Alt + B).
* "Bookmark All Tabs" can be accessed via the right-click context menu of a tab on the tab bar.
* Bookmark All: https://addons.mozilla.org/firefox/addon/bookmark-all/

Where has "The Lost Hero" by Rick Riordan gone to?

I downloaded the sample once it became available to iBooks. I wanted to purchase The Lost Hero and touched the buy button on the sample. Nothing popped up, and then I searched for it in the store, but nothing came up on the search. Does anyone know if this is a mistake on apples part or did the author decided to pull it.
Thanks!

I don't think anyone here could possibly know why some book is not in the ibookstore. But I see that one is available via the Kindle app.

How to change the white balance in Final Cut Pro?

What is the best way to change the white balance in Final Cut Pro? I have some clips which are to green. I would like if possible something which might resemble the Camera Raw dialogue in Photoshop. Any way of measuring color (RGB values)?

There is some specific help in this trainng book:
http://www.amazon.com/Apple-Pro-Training-Correction-Studio/dp/0321635280/
When using Color Corrector 3-Way to correct for a green tint, the bullet points are something like this:
1) After loading the clip into the Viewer and applying the CC3W filter to the clip, open your scopes and move the window so you can see the Viewer (with the CC3W tab open) and the scopes
2) First, if necessary, adjust the white and black levels using the video level sliders below the white and black color wheels (I use the slider above the scopes to make the trace in th4 scopes as bright as it will go without blooming)
3) Looking at the Parade scope, the idea is to balance the whites, mids, and blacks on each color display (red, green and blue). So you watch the Parade and drag the dot that is in the center of each color wheel (starting with the whites) away from the color of your tint (in your case, green). Drag the dot until the highest portions in all three Parade displays are as even as you can make them
4) Then do the same with the mids, using the Mids color wheel, moving its dot away from green
5) Do the same thing with the blacks
6) Double check the image on an external video display that is properly adjusted using color bars from Final Cut
NOTE: This short reply is not sufficient to fully explain this technique, and you really need to understand Color Theory before doing this anyway. That's why I recommended the training book.

Can you remove the camera white balance setting in Aperture

I have a Canon 7D and use Aperture for processing and storing my images.
With the Canon I shoot both video and still and frequently adjust the white balance in the camera. I make a frequent mistake in leaving the wrong white balance setting on - eg when taking video indoors in the evening I set the white balance to indoors (the Canon seems poor at white balance decision making on video) and then I forget I'm not using auto white balance and switch to taking a photo with flash. The result is a horrible blue photo - which if I don't spot the problem at the time seems very hard to correct afterwards.
I use the Aperture white balance adjustments frequently but unless there is a patch or white or grey I an use the dropper on, I find this particular situation seems to be right off the scale of what I can fix in Aperture. I end up with sliders at the extremes of the scales and no intuitive sense of what numbers to type in manually to try and get realistic colour - so I often end up discarding these photos even if the shot itself is something I'd like to use.
So my question is given I'm importing RAW, is there a way to show the phoo without the (wrong) white balance setting I applied in the camera, to let me choose white balance from scratch?
Or if not, do you have any advice about how to adjust from this very bluey unrealistic colour of image?

Kirkby - thanks for the quick reply.
Didn't know you could drag inside a value field - that's helpful.
But being able to get different numbers on the slider isn't the root of my problem.
In a specific example I have two photos - one taken with white balance set to flash and the photo was with flash, where after a bit of tweaking to get the colour I want the temp slider is at 5000K (and tint 0). The second photo has my shooting error with interior lighting white balance but taken with flash. The two shots were taken from almost the same point of the same view (but different people in frame). The shot with the white balance error comes off camera horribly blue coloured. I can fiddle with the two sliders - I take temperature to 20000K and tint to 40 to do the best with it I can, and with those settings one of the two faces is approaching flesh colour but the wall behind the subjects (which is a light blue in reality) is now appearing light yellow in places. I just can't get a good looking colour effect no matter ow extreme the slider settings.
I may have phrased my question badly - as I totally agree you can't show a raw without a colour setting - so maybe I'm better asking to be able to use a different colour setting on the raw data rather than having to start with adjustments on top of my white balance mistake.
Given the two shots were in the same place against the same background and the same lighting (both with flash) it seems to me I ought to be able to get a similar colour effect on both and I just can't. To illustrate here are the two photos (the one on the left was shot with flash wb and in Aperture I'm viewing it with 5000K and 0 tint, the one on the right was shot with indoor wb and in Aperture I'm viewing it with 20000K and 40 tint and it looks terrible!)
https://www.box.com/shared/qle3t6ovyhrd1egez3vc

Image contains camera White Balance setting; LR 5.5 only shows "As Shot", "Auto", and "Custom"

I have a new, Panasonic DMC-GX7. I shot a bunch of photos as JPGs. When viewing their Exif data using Exiftool, I can clearly see the camera's White Balance setting, as well as the Color Temp Kelvin, WB Red Level, WB Green Level, and WB Blue Level. However, Lightroom 5.5 only shows "As Shot", "Auto", and "Custom" when I click White Balance under Quick Develop on the Library tab or WB under Basic on the Develop tab. Exiftool shows the Exif Version as 0230 and the Panasonic Exif Version as 0405. Is LR looking for the white balance information in some other field? Do I need to configure it somehow for my camera? I am new to LR (but not to image processing), so could use some help figuring this out.

The whole question is not so simple as converting to DNG. Yes DNG is openly documented, yes the file can be read, but that does not mean it can be correctly interpreted by other software in the future and the best you can then do is starting the PP of your images from scratch. Imagine a DNG with LR adjustments that in some years you open the file in another software, possibly non-Adobe. Even if the file can be read it will not look the same, as the Adobe specific developing instructions could not be strictly followed. Even if all software manufactures agreed on a common set of adjustments, let's say everybody had a Highlights slider and a Clarity slider and so on, which is unlikely, the results would still be different as the underlying algorithms would be different.
Disclaimer: I only shoot raw and firmly believe it is the best option, but one must be conscious it has some shortcomings related to the future of our images.

Removing blue cast/tint from JPG (wrong white balance setting while taking picture)

Hi,
Photosohop newb here, still using CS3 (10.0), so please be patient.
I was at a convention not long ago, where I took lots of pictures with my phone. I only noticed at home, that a few of the pictures came out with an intense blue cast because of a bad white balance setting (I must have accidentally changed it).
I was trying to fix the image for the last 2 hours, with no real luck. I tried everything under Image -> Adjustments -> "Auto Color", "Color Levels" and "Match Color", moving the sliders up and down to get the best match. The best I could come up with was still far away from the other pictures I took the same day.
Here is one of the bad pictures: http://imgur.com/vw12aTQ
And here is one I took just a minute later with the "normal" setting: http://imgur.com/RMFm7fo
I actually got a pretty good match by cutting out some of the cobblestones from both pictures and using "Match Color" -> "Source", but I couldn't apply this technique to the whole picture.
Could somebody please help me to make the colors of the first picture similar to the second one?
Thank you,
Roland

Here's an easy fix...
Choose Image - Adjust - Curves, then click the Gray Point dropper and sample something in the image that should be a neutral gray - say one of the stones on the ground. Click in various places until you like what you see.
-Noel

Iphoto not recognizing my preset manual white balance setting on my Nikon D3100

hi there.
i've been using iPhoto to edit my photos uploaded as RAW, from my Nikon D3100. While i've been very satisfied with the results, i've run across a small problem. i've used various white balance settings on my camera: incandescent, flourescent, auto white balance, and recently started using the manual white balance. when uploading pictures to iphoto, the photo has indicated what white balance setting i have used, except when i use my manual white balance feature, the information shows up as AWB (automatic white balance).
can somebody please explain to me why this is? any other setting i use shows up with the appropriate icon, according to what i choos on my camera. is this a glitch? what is the manual white balance setting icon supposed to look like in iPhoto?
Again, I shoot in RAW, and upload directly to iPhoto successfully, as RAW.

I think this article will help explain this
and this one from Adobe
— Raw files have not had while balance set. They are tagged with whatever the camera's setting was, (either that which was manually set or via auto-white-balance), but the actual data has not been changed. This allows one to set any colour temperature and white balance one wishes after the fact with no image degradation. It should be understood that once the file has been converted from the linear space and has had a gamma curve applied (such as in a JPG) white balance can no longer be properly done.
So the displaed WB is simply a tag and has no effect on the image - it is simply information about the camera settings
LN

TS2518 Where has the White Balance Setting Temp K gone? I only have a slider "warmth" left...

Similar Messages

Maybe you are looking for