TS2529 iOS update throws phone into recovery mode - HELP

The current iOS update seems to have thrown the phone into recovery mode now requiring restoration through iTunes. Of course I don't have photo stream on and fear losing all my photos. Any way around this?

Reset, hold both the home and power buttons until the iPhone begins to restart. If this works great. If not you may have to Restore the iPhone to get it working again. If you decide to do this you may even have to use DFU Mode to Restore. Here are the steps for DFU. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes.

Similar Messages

  • HT201263 i forget my passcode.now when i put my phone into recovery mode it connects to i phone software update server and sftware starts download but after much time of download error=-39 occurs

    now when i put my phone into recovery mode it connects to i phone software update server and sftware starts download but after much time of download error=-39 occurs

    my itune keep showing message that i tune is downloading software for my phone. but downloading for several minutes it displays message that i tune cannot connect to my phone because it is locked with a passcode. first entre the pass code.
    on the other hand phone is started with a message on screen phone is disabled.

  • HT201210 my phone was unable to finish the latest update and gone into recovery mode. will only restore if i do a factory reset, but i dont wanna lose my photo/videos!!!

    my phone was unable to finish the latest update and gone into recovery mode. will only restore if i do a factory reset, but i dont wanna lose my photo/videos!!! how can i back up up before i restore it. im not able to acces my phone normaly, stuck in recovery or something.

    it seemed to have backed up everything just before the software update 6.1.4. so after the full restore i restored from backup and its all still there (mostly)
    what a relieve...thx

  • Is there a reason why the iOS 7 update put my phone into recovery mode?

    I was prompted to update my phone, which I did, and when it finished downloading, I got the "Connect to iTunes" screen, which I thought was odd. The iTunes tells me it was put into recovery mode. Is there any reason as to why this happened?

    Oh no! My iTunes doesn't want to recognize my phone now either.

  • Tried updating my iPad mini to iOS 8, it went into recovery mode and when I try to update then restore it on iTunes it says the download will last 300  HOURS and then it says something like "Connection failed"?

    I tried uppdating my ipad then it went into recovery mode. I thought "oh no problem, my phone has done this before". So, I hooked it up to iTunes and started to restore/update it, but when the update began, it said it would take 24 hours to download. Already abnormal. Then, the number kept rising higher and higher until it got to 300 HOURS. Then, once it reaches a certain 300, it says "connection failed. please check to see that you have a working connection or try again later" or something like that. So, my iPad is now stuck in recovery mode and I can't exactly talk to people now. What do I do?

    Hello aZaa4401
    Sorry to hear about your issue. I would start your troubleshooting with the article below to check to settings of your computer to make sure your connection is good to the iTunes Store.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Regards,
    -Norm G.

  • Every iPhone update fails and send phone into recovery mode

    I'm getting extremely frustrated, and I know I'm not the only one after searching Google, that every time an update is released for the iPhone mine fails and goes into recovery mode then works the second time. It has happened on every release of iPhone software since owning a 3G and then the 3GS. My 2G never had the problem. Is there a cause and solution to the problem?

    I thought mine was sorted on the second attempt this time but it wasn't. It took 6 attempts!
    To get it working finally I done the following:
    Restarted the computer
    Made sure iTunes was updated to version 9
    Located the 3.1 install file and delete it - Located in users/yourusername/library/itunes/iphonesoftwareupdates on the mac - not sure on a pc
    Reopen iTunes and complete the restore and install. It had to redownload the update but worked this time round.
    Message was edited by: James G4

  • My iphone 4s was loading a software update and went into recovery mode, I don't want to lose all my data please help me@!

    I was loading the latest software update to "fix bugs and security issues" and my phone went into "recovery mode".  I've never seen this before.  I plugged it into iTunes as shown on the screen of my phone and it says "Iphone in recovery mode detected" and suggested resetting the phone to factory settings. I don't want to lose all my data so is there another way to fix it?  All help will be appreciated!

    Sorry, whatever data you had on your phone has been wipe off already, since your phone is in recovery mode.
    You will need to restore your phone.  Then if you have a backup, you can choose that backup to restore from, if you have no backup, your only option is to sync contents from iTunes.

  • Interrupted update put phone in recovery mode.

    An interrupted update to iOS 7.1.1 put phone in recovery mode.  The phone told me to connect to iTunes and when I did it only gave me the option of restoring the phone.  The problem is though, that the phone hadn't been backed up in awhile and not at all to the computer I had to connect it to.  So is there a way I can reboot without restoring the iPhone?

    You can restore the iPhone from an iCloud backup or from an iTunes backup once you're back at your computer.
    I know that doesn't help too much, but it is an option.
    ~Lyssa

  • Update Sent iPhone into Recovery Mode

    A friend told me about the update so I connected my iPhone to my computer and chose "Update." I got an error that ended with my phone in "Recovery Mode." iTunes recognizes it as an iPhone in recovery mode and I choose "Restore" but what seems to be most of the way through the restore I get an error saying (direct quote) "The iPhone "iPhone" could not be restored. An unknown error occurred (6)." After I first had problems I updated iTunes, but that didn't help. I'm on hold with phone support. I've yet to talk to anyone.

    I also experienced the "recovery mode" issue. After distilling some of the recent posts here and related topics, here's what I found worked for me. (1) Delete iTunes 7.6 update, download and install iTunes 7.6 from Apple's website. (Good idea to back up your iTunes library just in case). (2) If you have tried several restores of the iPhone without success, navigate to //user/library and delete the several backup files there. (3) Reset your iPhone (simultaneously press home and power key until Apple logo appears). Turn iPhone off (press power key until screen blanks). (4) Plug in your iPhone and you'll hopefully see that the software and firmware is being restored. (This takes a while). After that, you'll see the message that your iPhone files are being restored, however you have them set in iTunes. One note -- though I'm not sure why, having your iPhone plugged directly into your machine's USB port rather than through a hub may prevent device polling from corrupting the iPhone restore process. This worked for me -- not sure if similar process would work on Windows boxes or not. After about an hour of messing with it, now have updated iPhone fully functional (again) with new features.

  • HT201442 Downloaded iphone 4 ios7 update put phone in recovery mode? what to do? don't want to restore afraid photos didn't back up!

    Help!!!
    I recently updated my itunes 11.1 - successfully
    Went to update my iphone4 to the ios7 and it put my phone in recovery mode!!!
      concerns:
    1. i'm afraid to restore iphone (not sure if i backed up recent family photos and contacts)
    2. checked online for help and only found this http://answers.yahoo.com/question/index?qid=20130918173948AAktqtt
    3. is there anything to help restore phone before it was put in recovery mode?
    HELP!!!

    ANYONE THAT NEEDS TO SAFELY RETURN BACK FROM RECOVERY MODE:
    follow this:
    http://www.pcadvisor.co.uk/how-to/apple/3448684/how-get-iphone-out-of-recovery-m ode/
    THEN START UPDATE OVER

  • I tried to download iOS7 to my iPhone 4, it put my phone into recovery mode and every time I try to restore it, it says it failed? HELP

    I have an iPhone 4, I tried to download iOS 7 from iTunes tonight. I made sure my iTunes was up to date and everything, and while it was downloading iOS7 my screen went black and the iTunes symbol with the USB cord popped up onto it and in my iTunes tab, it said that it detected an iPhone in recovery mode and to restore/update it. I've tried it twice already, resetting my laptop twice and I don't know what to do someone please help!

    I think this could help. Also, there are links to other posts for a bunch of possible soultions. I'd try this first. http://support.apple.com/kb/HT1808

  • HT1766 Update sent phone into restore mode?

    I just updated my 3GS iphone with iSO6. The update then stopped and the phone restarted and the recovery screen appeared on the phone.  I don't have anything backed up and don't want to lose my pictures, is there anything that I can do.

    Attempting to update a device without a backup is not very smart.
    WIthout a backup there is nothing to restore.
    Once in recovery mode, all data is gone and the device must be restored.
    Luckily for you, nothing on your device was important. Had that data been important then no intelligent human would elect to not backup the data.

  • I recently put my phone into recovery mode but it showed this "The iPhone can not be restored error(3419)."

    I put my phone into a recovery mode but it showed "The iPhone cannot be restored error (3419)." I want to restore it, but all it shows is a iTunes symbol, and an Apple cord. What do I do?! I'm really frustrated. I aside with that, I tried using TinyUmbrella, but my iPhone wont detect.. Can anyone solve this?!

    Error 1 is a very bad Hardware Error of the Baseband Chip. There is no fix. If you have Warranty or AppleCare Coverage, make Genius Reservation and take iPhone to Apple for resolution.

  • HT201210 I just tried to update my iphone 5 c and its now put my phone into recovery mode

    when i connect it to the computer to restore it its making me download the update first which i dont want to do cos it takes hours,
    is there anyway out of the downloading the update at this stage and just restoring my iphone?
    Thanks

    Delete it?  My iPhone was connected to my laptop, and I said Download and Install (or whatever) from iTunes.  It downloaded it, then announced the firmware version was wrong... so I know of no intermediate file to delete.  I just tried it again, hitting the Download Only button, but I see absolutely no indication of where that file would be stored, or, now that it is (supposedly) downloaded, how I would go about installing it.  Thanks for your suggestion, though.

  • 2.0 update send phone to recovery mode

    unable to recovery phone... unknown error 13

    Got i got the iphone to recovery finally...but know it wouldn't let me update to 2.0

Maybe you are looking for

  • Using a single iPod on two separate PC's

    I have a single iPod and have installed iTunes on two PC'c. They don't have identical music libraries and when I try to transfer music from the newer itunes installation on the 2nd PC, iTunes tells me that this iPod isn't authorized and doesn't allow

  • EXPORT / IMPORT

    Hai all! I have two programs like this : report test1. DATA :    w_char TYPE n VALUE '1'. EXPORT w_char TO MEMORY ID 'ABC'. SUBMIT test2 AND RETURN. WRITE :/  w_char. report test2. DATA :    w_char  TYPE c. IMPORT w_char FROM MEMORY ID 'ABC'. WRITE :

  • PDFMaker font problem

    Can anyone offer any advice on how to debug a font problem? I am using a (shareware) symbol font on my Windows XP system. It works great in FrameMaker, and comes out perfectly in Frame-generated PDF files. Unfortunately, I also have to convert Excel

  • Adding the collapse/expand function to a subgroup

    Good morning, I'm quickly getting a handle on building some very nice reports with SSRS. When I do the first grouping of data, the expand/collapse function is added to the top level. Works great. When I add a subgroup, the expand/collapse (+) functio

  • Would anyone like to help a very experienced, new-to-Flex guy?

    Hi Folks, I've been developing GUI apps, on Mac (SuperCard, Omnis, 4D), Windows (VB6), Web (Dot Net C#) and iPhone for a looong time.  I am now considering using Flex/AS to write an in-browser commercial application. Without going into it, let's just