TS2565 Help me install Logic Studio Pro on OS Lion 10.7.3

I am having an issue installing Logic Studio.  I have Lion 10.7.3 and when I click on the Logic Pro icon it says that you can not run on this OS.  It says Logic Pro is 9.1.1  I tried updating to 9.1.7 but then it says I need Logic 9.0 or higher.  Help!!!

I also have this same problem. Can't install either Logic or FCP7 onto my Lion systems. I tried running under 32bit mode and the same luck. The problem with this is that it works when the software has been installed before the Lion os X upgrade, however if you make do a clean install of Lion then both Logic and FCP7 hang after putting in the serial number.... WHAT A PAIN as now I can't use either products!!!!
APPLE - PLEASE POST A PATCH TO HELP WITH THESE INSTALLS

Similar Messages

  • Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion.  Use the program Pacifist to install it.

  • HT2375 I am trying to install logic studio pro 8 to my new mac, but i am getting a message that the pc power is longer supported

    You can't open the application Logic Studio8 because PowerPC applications are no longe " r supporte

    Hi
    This error is because the Logic 8 installer will not work on OSX Lion or above. Once you've goy it installed Logic 8.0.2 works OK
    You can get the installation done using Pacifist: see my post near the bottom of this discussion for detailed instructions:
    https://discussions.apple.com/message/18338482#18338482#18338482#18338482#183384 82
    Once installed, you wil need to download the latest updates.
    CCT

  • Problem installing logic studio to my mac 10.6.8 PLEASE HELP!

    I am having trouble trying to install Logic Studio on my mac book pro 10.6.8 when i click on the "logicstudio.iso" file it mounts the file but when I "double click" on the "dmg" file nothing happens the "installer" doesn't pop up. I have installed other programs, the installer pops up and installs these programs with no problem. I have no idea why this is happing please PLEASE HELP ME

    REboot holding CMD+r keys to boot from your Restore partition, useDisk utility from there to firstRepair Disk, then Repair Permissions.

  • Trying to install Logic studio 8. Says serial number is invalid. Help..

    Trying to install Logic studio 8 and it comes up with an alert saying serial number is invalid. Help please...

    Acrobat 9 is not longer supported. The serial number severs for those products are no longer available.
    Acrobat 9 Pro - Serial Number Problem - 3 Separate Licenses

  • Newly installed logic studio won't launch on my macbook pro

    I just installed Logic Studio on my macbook pro (core 2) and it crashes before it can launch all the way. could this be a conflict with my protools LE software, or Reason? any ideas? thanks.

    Have you downloaded the .01 update for LP8? That should improve things a fair bit. Don't know about the MBox2; might want to their website on that one.
    Cheers

  • Just installed logic studio according to the instructions  but when i try to open it for the first time it show "logic pro quit unexpectedly". What shall i do?

    just installed logic studio according to the instructions  but when i try to open it for the first time it shows "logic pro quit unexpectedly". What shall i do?
    Sharad

    Dear Katty,
    Thank you very much for your answer! I have 2 Apple ID, and I have tried both of them and the problem continues. I founf several peolpe with the same problem in apple communities foruns and that really seems that there is some problem. I addded the links for 2 of those discussions.
    https://discussions.apple.com/thread/3374419?start=0&tstart=0
    https://discussions.apple.com/message/16628399#16628399
    Do you have an idea of how can I solve this problem?
    Thank you very much again.
    Best regards,
    Alfonso

  • How many macs can I install Logic studio on?

    Ok so i recently bought my first ever iMac.
    And i installed logic studio on it, but I am considering a Mac Pro because honestly; i love my iMac but i kind of just want this imac for 'personal' things (movies, music, family photos, videos ect.)
    and I want a Mac Pro just for logic and any other PRO apps I buy later on. So i was wondering if anyone can help me with the question i have;
    How many macs can I install Logic studio on?

    It's in your Logic Studio license agreement:
    2. Permitted License Uses and Restrictions.
    A. This License allows you to install and use one copy of the Apple Software on one Apple-labeled desktop computer and one Apple-labeled laptop computer so long as both computers are owned and used by you. This License does not allow the Apple Software to run on more than one computer at a time.

  • How many computers can install logic studio through a serial key?

    Hi,
    I have recently purchased a new mac book pro. I have alredy installed logic on my previous mac. Is it possible to install logic with the same serial key on my new mac?
    On how many computers can we install logic studio using the same serial key?
    Please help asap.
    Thanks.
    warm regards.
    Rohan P.P.

    Hi
    rohanpp786 wrote:
    Hi,
    Is it possible to install logic with the same serial key on my new mac?
    Yes
    The licence details depend on how you originally purchased Logic. The original (DVD) licence allows for you to have Logic installed on 2 computers, provided that you do not use both at the same time.
    The Appstore Licence allows you to install on any computer that you own. See this article for a simple guide
    http://www.macworld.com/article/1157018/appstore_licensing.html
    and this for the gory details:
    http://www.apple.com//legal/itunes/ww/
    CCT

  • 8 hours to install Logic Studio?

    i just bought a 2.4Ghz 15" unibody macbook pro. i also installed 4 gigs of RAM and I opted for the 250Gb 7200RPM drive.
    i am now installing Logic Studio and i chose to have everything installed.
    i am really surprised to see the Logic Studio installer said it will take 8 hours to install! right now, it's at 7 hours and 17 minutes.
    i installed this same copy/version of Logic Studio on my Dual 2.0 G5 (that only had about 1.5Gigs of RAM) about a year ago and i remember it taking only 2 - 3 hours to install.
    why is it taking much longer to install on a much faster machine?

    Hahahaha... I went into 'panic mode' when I first started to install Logic. Said something like 5 hours and it was already 9 at night. It (Logic) was completely loaded by 11:15 so as I'm sure you've found by now, don't worry about what your screenshot says. Hope this helps anyone else who has yet to install the program. ~King

  • Need 2 install Logic Studio 9 Audio content & Jam Packs?

    Have Logic Studio 9: didn't have enough space to download extras originally (i.e., Audio Content & Jam Packs).  Have now upgraded to 500 Gb HD for 2.4 Intel Core 2 Duo MacBook Pro and have tried to install Logic Studio again (The logic Pro; Logic Node; MainStage; and WaveBurner seem to have installed OK - at least they show up in Applications folder)  When it comes to installing Studio Content the Studio Content disk install process gets hung up at the end of the downloading. A message window pops up saying: The installation failed. The installer encountered an error that caused the installation to fail.  Contact the software manufacturer for assistance.  The Logic Studio software is registered to me and has a Support ID: I6941D2H41H.  It is frustratingly difficult to find anywhere that I can contact tech support related to this Logic Studio issue.  I would simply like to be able to get the included Audio Content and the Jam Packs from the Logic Studio Suite installed on my MacBook Pro.  I would appreciate some response and help to be able to get the application data so that I can fully install the whole Apple Logic Studio program ASAP.  A further suggestion is that a means of contacting support for such related issues be instituted.  Anyone know how to get the corrupted Audio Content & Jam Packs for downloading?

    Firstly you are Not addressing Apple here... This is a User to User Forum...
    That said... Give Apple Care a Call... Tell them you are a Logic Pro User and you should be transferred to a Logic Expert...
    Explain your situation to them...
    Make sure you have your Serial Number and Date of Purchase handy...

  • Installing Logic Studio on an iBook g3?

    I recently purchased an apple i book g3 on ebay, which i plan to use specifically for creating beats and music.. and i also recently came across Apple Logic Studio 8, did some research on it, and it seems like it's just what i need.
    My question is, is it a bad idea to attempt to install Logic Studio on the g3? the minimum requirements for Logic appear to be just a bit more than what my laptop has for me to work with... The iBook i purchased has 900 mhz, 40gb, mac os x 10.4 tiger, those are mainly the only specs i am worried about..
    Just by looking at the numbers i would assume it may not work, but then again i read a few posts from people on other message boards, using basically the same laptop, and installing logic express without any issues.
    Either way ive already paid for the laptop so i am stuck using that for a while, but i REALLY want to get my hands on Logic Studio and work with that as well.. suggestions?

    +logic 7 System Requirements:+
    (pro- and express have the same sys reqs - ES)
    +* Macintosh computer with *PowerPC G4* or faster processor (G5 or dual G4 processors recommended)+
    +* Mac OS X v10.3 or later+
    +* 512 MB of RAM+
    +* 4 GB of available hard-drive space+
    +* PowerPC G5 and Gigabit Ethernet connectivity for Logic Node applications+
    +* DVD drive for software installation+
    +* Available USB port for XSKey (copy protection)+
    +* Low-latency multi-I/O audio hardware and MIDI interface recommended+
    I think you should try to get an earlier Garageband (2.0.2, part of iLife '05):
    http://docs.info.apple.com/article.html?artnum=306338
    Or Logic 6:
    Minimum:
    +Mac OS X 10.2/Mac OS 9.1 or higher+
    +604/250 MHz processor+
    +128 MB RAM+
    +CD-ROM or DVD drive+
    +free USB port for XSKey+
    Recommended:
    +CPU with Velocity Engine support (G4/MP)+
    +256 MB RAM or more+
    +Low-latency audio hardware for software instruments+
    +Multiple I/O audio hardware for Surround+
    +Separate fast hard drive for audio data+
    +MIDI interface, MIDI keyboard+
    regards, Erik.
    MWEBme

  • Need to make space in my Hard drive to install Logic Studio Upgrade

    ok. Here's my problem:
    I have a 1st generation Mac Book Pro. That means 100Gb of storage.
    I've been using it for professional audio recording since then with Logic Pro (6 or 7 I think) and I made necessary upgrades when they were available in both Mac book and Logic. So, now my Mac has 2.16 GHz processor, 2GB memory RAM and is running Mac OS X 10.6.3
    When it comes to Logic, I am in Logic 8, trying to make the last upgrade of Logic Studio but looks like there's no more space available on my laptop. At this point, I moved any other data that I don't need. My Hard drive is almost full of a data that most of it supposedly needs to be replaced or skipped. I'm talking about additional content of audio coming on Jam Pack, etc... The installation program allow me to put some of the data in other hard drives (about 22.68 GB) but still is not enough.
    Is there any way to solve this? May be uninstalling programs and data that later will be installed again with my upgrade? I don't want to make a mess before asking.
    Probably is time to get a new computer. If this is the only option please somebody tell me! but if is not, I refuse to spend the money. My laptop is working fine...
    Thank you
    Fran

    Well, first i would decide what you need the computer for. If you use iPhoto and iTunes, maybe moving the libraries to external HD may free up a significant amount of HD space.
    Also, look for apps you don't need anymore, look for ancient data that can be zipped&archived away. That's a lot of work, but is worth the time, because you get to know what really is on your HD. I have so many small apps&tools lying around on my HD clogging space, but in fact i only used them once or twice in a lifetime, so better delete them.
    BTW: Make sure you have enough space on your HD not only to install Logic studio but have some extra GB's for the OS to shuffle data around. No OS likes a full HD.
    My strong suggestion would to give your Macbook to a trustworthy Mac store where they install a bigger HD and copy everything over to the new one.
    Fox

  • Unable to Install Logic Studio

    I am trying to install Logic Studio and am failing every time.
    I have a Powerbook G4 1.5 Ghz with 1.25 mb Ram running OSX 10.4.10
    I am able to start the installation, choose the location of the install, and select which components I'd like to install. I have decided to limit the install to only Logic Pro and leave out all the other programs as my harddrive doesn't have the space.
    So according to that, only two items are checked. Logic Pro, and Apple Loops Utility under Tools. It's telling me that it requires 5.7 GB harddrive space, which I have. I click upgrade and type in my password. It installs Logic Pro, installs Logic Node, and when it tries to move on to Logic Utility (or something like that, the screen changes too quickly) it goes to 3% and gives me an error.
    Then it tells me to "please try installing again"
    I've tried installing logic node separately but it still doesn't work.
    What am I doing wrong? Normally I'm ok with computers, but i guess only on PC's. Macs are a new world to me.
    I just realized I only have Garageband 2. Is it because I don't have Garageband 8?
    Message was edited by: treeof611
    Message was edited by: treeof611

    Maybe this is inapropriate but I once got very lucky by just cleaning the DVD which was full of finger prints, After I cleaned it...It worked.
    Like must of us I have a lot of experience being frustrated, even the most knowlegable among us get frustrated at time.
    What I would do is proceed in a mechanical way step by step (computers hate this)
    1. Clean DVD,
    2. Seat down and read the install procedure.
    3. Disk Utility, Startup disk>Verify and Repair disk permission
    2. Trash Logic Pro 8, Sound Track Pro, Main Stage and Garage Band (Save GarageBand Files
    somewhere else if you need too)
    3. Go toFinder > Empty Trash
    4. re-install The absolute minimum (No Node dont need this yet) (Maybe you're forced to it I dont
    remember) but if you have the choice the answer is always NO
    5. Proceed slowly reading carefully all instructions.
    6. Repeat 1-5. If this dont work Maybe you have deficient DVD's it Happen (It happen to me)
    Honestly Your system seams to be bare bone minimum to run Logic Pro 8. Maybe Logic has out grow it.
    Best of luck
    Eric D

  • Just installed DVD Studio Pro 2 in Power Book G4 Lap but I cant view Subtitles in the grew square while typing the text. I see the text in the Inspector but nothing appears in the grew square. Once finished the subtitle I run the sceen and see the subtitl

    I just installed DVD Studio Pro 2 in a Power Book G4 Lap but I cant see subtitle text typing after doble click a new subtitle. I see the text that I am typing in the Inspector Window but the grew square in the Monitor Window seemes empty. Once I finished the subtitle I can run the video and the subtitle appears in color, font and size chosen. Creating the next subtitle I can even go to the one before click once over the subtitle, then click above to get the videoline tool over the subtitle and I will see the subtitle in the Monitor and editing the text in the Inspector I can see the changes in the Monitor. But as soon as I doble click the grew square appears and the text dissapears. Sin doubt the text is there because I can select the invisible text with "Apple"+"A", and then change fonts and sizes and it works. In Color settings I tried every posible combination of Mapping types, color and opacity. In DVD Preference I checked the subtitle  settings. The monitor text defaults work perfectly and double clicking texts in the Monitor window where a grew sqaure appears and the text is visible just works correctly. Somebody can help? Do I need to change some configuration in the LAP?

    I just installed DVD Studio Pro 2 in a Power Book G4 Lap but I cant see subtitle text typing after doble click a new subtitle. I see the text that I am typing in the Inspector Window but the grew square in the Monitor Window seemes empty. Once I finished the subtitle I can run the video and the subtitle appears in color, font and size chosen. Creating the next subtitle I can even go to the one before click once over the subtitle, then click above to get the videoline tool over the subtitle and I will see the subtitle in the Monitor and editing the text in the Inspector I can see the changes in the Monitor. But as soon as I doble click the grew square appears and the text dissapears. Sin doubt the text is there because I can select the invisible text with "Apple"+"A", and then change fonts and sizes and it works. In Color settings I tried every posible combination of Mapping types, color and opacity. In DVD Preference I checked the subtitle  settings. The monitor text defaults work perfectly and double clicking texts in the Monitor window where a grew sqaure appears and the text is visible just works correctly. Somebody can help? Do I need to change some configuration in the LAP?

Maybe you are looking for

  • Mini-DVI to HDMI Problem

    Hi, I bought a Mini-DVI to HDMI adapter like this one: http://www.hdtvsupply.com/mini-dvi-to-hdmi.html to be able to hook up my macbook (2007 white version) to my HDTV. However, since HDMI is traditionally for both video AND audio, the HDMI channel o

  • Not going to sleep, overheating?

    Just recently my MBP stopped going to sleep when the lid is closed, or when left open but not used(my setting tell it to go to sleep after 5 mins of no use). The heartbeat light only dims but stays the same, or is bright and stays the same.I noticed

  • Had to delete my iPhone backup, now my iPhone will not even register in iTunes. Help?

    I deleted my iPhone backup because I kept getting an error message related to my backup whenever I synced my iphone.. so I followed what Apple said to do here: http://support.apple.com/kb/ht4946 The backup is now deleted and my iphone will not sync o

  • Trasfer Rules missing in BI Content

    Hi, I'm facing an issue with transfer rules in BI 7. For most infocubes, when i try to activate bi contnet in data flow before, it does not give me transfer rules. Moreover, on the bi content installing screen on the workbench, when i'm trying to loc

  • Runtime error when testing function module 'RSWR_RFC_SERVICE_TEST'

    Hi, I'am integrating BIW 3.5 with EP 6.0 according to the report 'RSPOR_SETUP'.I've carried all the steps,but an error on step 12 : system failure during call of function module 'RSWR_RFC_SERVICE_TEST' is there .When I test the connection with functi