TS2570 After performing verbose safe boot - runtime corruption detected on HD

Are their any other steps to resolve other than a disk replacement and complete restore ?

Did you boot off the DVD and run Disk Utility/Repair Disk? What steps have you tried? What OS are you running?

Similar Messages

  • TS2570 Still cant access my computer, followed instructions to perform a safe boot and last line of script it shows: BootCacheControl: Unable to open /Var/db/BootCache.playlist:2 No such file or directory. Any idea?

    Brand new Mac Book Pro
    Purchased in Mexico's Department store Liverpool on June 20th 2012
    Purchased Memory upgade to 8Gb, on june 27th, at Apple Store Memorial City, Houston
    Upgraded memory from 4Gb to 8Gb on June 28th.
    Tried to write on my external HD (previously written on a windows based PC) with no success.
    Upon reccomendation from a Mac assistant, copied all my external HD contents into my Mac Hard drive.
    Then formatted my external HD and copied back all my information to it.
    deleted all the  information from my MacBook Pro HD.
    Attempted to repeat the same operation with another external HD, but got a message saying there was not enough epace on the computer HD (even though I have a 750Gb Hard Drive.
    Looked in the trash bin and there it was, all the information previously deleted..
    Could not empty the trash bin, although I got a message asking me to safely delete all the information from the trash bin,
    Could not get enough space released, after several attpempts the trash bin was finally emptied.
    All happy getting acquainted with my new MacBook Pro. Two days later, got a gray screen and not able to start the computer.
    Looking in to Mac support I found article http://support.apple.com/kb/TS2570 and followed instructions to perform a safe boot:
    "Perform a Safe Boot
    Simply performing the Safe Boot may resolve this issue.
    Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
    Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to
    see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
    Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
    The following is the script that appears on the screen upon safe boot. and halt after the last line.
    AppleACPICPU:Processor Id=6 LocalAplicId=255 Disabled
    AppleACPICPU:Processor Id=7 LocalAplicId=255 Disabled
    AppleACPICPU:Processor Id=8 LocalAplicId=255 Disabled
    calling mpo_policy_init for TMSafetyNet
    Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    calling mpo_policy_init for Sandbox
    Security policy loaded: Seatbelt sandbox policy (Sandbox)
    calling mpo_policy_init for Quarantine
    Security policy loaded: Quarantine Policy (Quarantine)
    Copyright (c) 1982, 1986, 1989, 1991, 1993
            The Regents of the University of California. All Rights Reserved.
    MAC Framework Succesfully initializad
    using 16384 buffer headers and 10240 cluster IO buffer headers
    IOAPIC: Version 0x20 Vextors 64:87
    ACPI: System State [SO S3 S4 S5] (S3)
    PFM64 (36cpu) 0xf10000000, 0xf0000000
    Aplconsole relocated to 0xf1000000
    PCI configuration changed (bridge=16 device=4 cardbus=0)
    [ PCI configuration end, bridges 12 devices 16 ]
    Firewire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffe9b2aa2; max speed s800.
    Pthread support ABORTS when sync kernel primitives misused
    com.apple.AppleFSCompressionTypeZlib kmod start
    com.apple.AppleFSCompressionTypeDataless kmod start
    com.apple.AppleFSCompressionTypeZlib load succeeded
    com.apple.AppleFSCompressionTypeDateless load succeeded
    AppleIntelCPUPowerManagementClient: ready
    BTCOEXIST off
    wl0: Broadcom BCM4331 802.11 Wireless controller
    5.100.98.75
    AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitializad
    rooting via boot-uuid from /chosen: 6E918706-FC0D-37460-A3A0-6268A51DF93B
    Waiting on <dict ID="0"><key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleAPIPCI/SATA@1F,2/AppleIntelPchSe riesAHCI/PRT0@0/AOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlock
    storageevice /IoBlockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartit
    BSD root: disk0s2, major 14, minor 2
    Kernel is LP64
    com.apple.launchd 1   com.apple.launchd 1   *** launchd[1] has started up. ***
    com.apple.launchd 1   com.apple.launchd 1   *** Verbose boot, will log to /dev/console. ***
    Running fsck on the boot volume...
    ** /dev/rdisk0s2 (NO WRITE)
    ** Root file system
       Executing FSCK_HFS (version diskdev_cmds-540.1~25).
    BootCacheControl: UNable to open /Var/db/BootCache.playlist:2 No such file or directory
    launchctl:Dubious permissions on file (skipping): /Library/LaunchDaemons
    launchctl:Dubious permissions on file (skipping): /System/Library/LaunchDaemons
    Any help or suggestions on what to do next would be welcomed.
    I am in the middle of the Atlantick, stuck with a brand new, non working Apple MacBook Pro.
    Best regards
    Sergio Ramos

    Reinstalling MacOS does NOT fix the problem for me.  I'm still searching a solution !
    Bernard

  • TS1381 My left arrow does not work on my macbook pro(model A1226).  I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, test all other keys with keyboard view (all others work)  - HELP!!

    My left arrow does not work on my macbook pro(model A1226).
    I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, & tested all other keys with "keyboard viewer" (all other keys work except for the arrow). 
    In addition, I have gone thru all the recommended checks with universal access and have booted from snow leopard dvd and the left arrow still does not work. 
    I have tried using the left arrow key in all of applications I use such as: excel, ms word, address book, calendar, iphoto, terminal, & highlighting an icon and using the arrows to move to another selected icon.
    Here is the kicker!  In addition, I purchased a logitech solar bluetooth keyboard and the arrows work fine with my ipad but do not work when paired with the macbook pro. All other keys work fine on the macbook pro using the bluetooth keyboard.
    I believe this says that the problem is not in my macbook pro keyboard. So where can it be?
    Can anyone think of any other rabbit holes I can search?
    thanks and regards
    vats3

    I would also like to add that I've reverted the two cd drive and hard drive mods I did and the laptop is back to factory hardware and there is 0 corrosion or mold visible.

  • Im having trouble getting my macbook pro to boot up after a fail safe boot, im getting as far as the grey screen with the apple loggo. so im trying to run a disk repair but is saying the disk is locked, how do i unlock disk??

    Im having trouble getting my macbook pro to boot up after a fail safe boot, im getting as far as the grey screen with the apple loggo. so im trying to run a disk repair but is saying the disk is locked, how do i unlock disk??

    Some clarification may help.
    You say you cannot boot normally.  It shows a gray screen with the Apple logo.
    Did you say it will boot successfully in Safe Mode (boot, then hold down the Shift key)?
    How did you boot the machine to run Disk Utility?  (Which keyboard combinations)?

  • Runtime Corruption detected on Macintosh Hd

    Runtime Corruption detected on Macintosh Hd, fsck will be forced on next mount.
    Hfs_swap_BTDNode:record #-1 invalid offset (0x0000)
    Hfs: node=14669 fileID=4 volume=Macintosh HD device=/dev/disk0s2
                   0 [level 3] [ReadUID 0] [Facility com.apple.system.fs] [Errtype FS] [MountPT /]
    What does this mean and how do I fix it? It came up during safe boot which I used because I have the gray screen with apple logo and waiting that won't let me log all the way onto the computer.

    It means your drive has malfunctioned. Ideally you should replace it. If you prefer to risk continued use, you should erase it and restore from a backup.

  • Hfs: Runtime corruption detected on my external Back up disk

    Using Drive Genius 3 on my iMac.
    I received an email from this application with Re: Drive Genius: DrivePulse™ Drive Integrity Warning.
    The message states:
    A potentially critical system error has occurred:
    hfs: Runtime corruption detected on FreeAgent GoFlex Drive, fsck will be forced on next mount.
    The volume should be repaired as soon as possible.
    How can this be done?

    Using Disk Utility to verify or repair disks
    27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

  • Runtime corruption detected on Macintosh HD, fsck will be forced on next mount

    I encountered this message when i attempted to follow the Command + S upon bootup because everytime I login, it will go back to the login screen.

    Do you have an up to date backup? Your HDD is failing and needs to be replaced.
    Runtime Corruption detected on Macintosh Hd

  • Kernel Panic After Login yet Safe Boot Works

    Every time I attempt to login I have a Kernel Panic, so I booted up in Safe Boot and logged in with no problem. Any ideas?

    Remove your login items and check if you still get a KP after login.

  • Blue screen after appemtping a safe boot. HELP!

    I attempted a safe boot after receiving a gray screen w/ spining gear.  I have since gotten a blue screen. PLEASE HELP!

    Hello,
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • Blue Screen After Load, No Safe Boot, No Reinstall possible. Think you can figure this one out??

    MacBook Pro "Core i7" 2.2 15" Early 2011
    2.2 GHz Core i7 (I7-2720QM)
    Intro.
    February 24, 2011
    Disc.
    October 24, 2011
    Order
    MC723LL/A
    Model
    A1286 (EMC 2353-1*)
    Family
    Early 2011 15"
    ID
    MacBookPro8,2
    RAM
    4 GB
    VRAM
    1 GB*
    Storage
    750 GB (5400 RPM)
    Optical
    8X DL "SuperDrive"
    Ok so i got this laptop in a few days ago here are the problems and the things i have tried. This laptop when it came to me did not have a hard drive, so obviously no OS. Upon installing a hard drive then trying to load Yosemite from a USB stick, I turn mac on, sleep light will blink 5 times then boot, Will come to normal gray screen then apple logo, will then load the OS install, but go straight to a blue screen with vertical lines. Tried different hard drive, tried different RAM sizes and speeds, tried different OS, tried CD instead. Have done numerous PRAM and SMC resets. trying Safe mode gets me a panic cpu 4 caller error then restarts. I have tried using a hard drive that had an OS already installed and will go straight to blue screen after loading. I have tried fsck -fy in single user mode. I do get that disk2s3 is write protected in single user mode, but im pretty sure that its the OS disk. I do not see a second hard drive in single user mode but i believe that because its not partitioned yet. Any ideas community?

    Tried doing OS X lion by CD now, and will only get half way through load bar before the apple logo and loading bar disappears and then it will sit at a gray screen.

  • TS2570 After performing a "disk repair" a message in red indicates "Error: The underlying task reported failure on exit.

    Can someone help me with this issue. I can't install disk and restart my Mac it indicates verify permissions for Mac OSx install disc 1, the red error message states the underlying task reported failure on exit. I cannot start up my Mac and I am concerned that I lost my files.

    Just check the steps you are making are the same according to this help page.
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck

  • My macbook says runtime corruption detected on macintosh hd, fsck will be forced on next mount.

    Help

    Your disk is corrupt. Reboot and see if fsck is able to repair the corruption.
    If not post error here and we will help with a solution.
    Allan

  • Help: upon safe boot, got following message: BootCacheControl: Unable to open /Var/db/BootCache.playlist:2 No such file or directory

    Mac Book Pro, late 2011. Purchased in a department store in Mexico.
    Was running ok for several days after I purchased it.
    Had some software installed and memory upgraded from 4 to 8Gb.
    Suddenly at start up, got a gray screen with a spinning wheel and never boot.
    Followed advise from http://support.apple.com/kb/TS2570 and performed a safe boot. (hold Shift-Command-V during startup instead of just Shift).
    The boot sequence starts then stops and nothing happens. these are the last lines of the boot sequence.
    BSD root: disk0s2, major 14, minor 2
    Kernel is LP64
    com.apple.launchd 1   com.apple.launchd 1   *** launchd[1] has started up. ***
    com.apple.launchd 1   com.apple.launchd 1   *** Verbose boot, will log to /dev/console. ***
    Running fsck on the boot volume...
    ** /dev/rdisk0s2 (NO WRITE)
    ** Root file system
       Executing FSCK_HFS (version diskdev_cmds-540.1~25).
    BootCacheControl: Unable to open /Var/db/BootCache.playlist:2 No such file or directory
    launchctl:Dubious permissions on file (skipping): /Library/LaunchDaemons
    launchctl:Dubious permissions on file (skipping): /System/Library/LaunchDaemons
    For what little experience I have on Unix systems, it has to do with the libraries which cannot be launched...
    Any ideas, solutions, suggestions are welcomed.
    Cheers.
    Dipbaja

    Boot into Recovery (command-R at startup), launch Disk Utility, select your startup volume, and run Repair Permissions. Then reboot as usual.

  • MacBook Pro won't get past gray start screen - RunTime corruption error

    Hi, I am a novice when it comes to fixing things, so I will make a Genius Bar appointment, but I thought I would consult this community first in case anyone has experienced this same issue:
    I was using my 13 in. MacBook Pro this morning after not using it for a couple weeks. (It was running fine last time.) It started up fine, and the few applications I was using worked OK. Then I got an error saying I needed to update my Java in order to access my work VPN. I didn't think twice about downloading the Java upgrade. Once the Java download was complete, I thought I might need to restart to get the VPN to recognize the update. And that was the last time I was able to see my desktop. I restarted, and the could not get past the gray screen. I did this twice. Then I did a safe boot (showing the status of the progression), and that when I saw this message over and over and over:
    hfs: RunTime corruption detected on MacIntosh HD, fsck will be forced on next mount.
    hfs: BlockMarkFreeInternal () trying to free unallocated blocks (10865570,8) on volume MacIntosh HD
    (I snapped a pic with my phone - that's how I transcribed it.)
    This ran for about 20 minutes before I suspected it wasn't actually doing anything, and I forced it to shut down by pressing the power button.
    I just tried to start it again (fingers crossed, hoping for a miracle), but no such luck. Does anyone have any ideas? Is all lost? Thank you in advance for any recommendations!
    Jennifer

    I should add that I don't know if the Java download is responsible - could just be a coincidence that it was the last thing I did/downloaded before restarting.

  • Safe Boot seems to have broken my W7 Bootcamp partition

    MacBookPro Retina
    OS X 10.8.3
    BootCamp with Win7
    Parallel's VM 8 using BootCamp Partition
    This morning I was looking at my logs, and I saw a minor odd recurring error with a Spotlight process, so I Googled it, and found that I could fix it by doing a Safe Boot.  So I shut down my running programs, and I did a  SHUTDOWN on my Parallel's Windows 7 VM (running from my BootCamp partition).  I performed the Safe Boot, OS X came up, and everything seemed fine until I tried to start a Win7 VM using Parallels.  When I did that, I got a white progress bar that said "Windows is loading files", and then the WIndows Splash screen, and then the Windows startup recovery tool.  The tool found no errors and so was unable to repair anything, so I closed everything, and rebooted into BootCamp mode, and I found the same sequence of events, but this time the startup tool said that it had repaired Windows and then it rebooted.  But again the system went into startup repair mode, but it found no errors.  Now, each time I boot to BootCamp Win7, the white progress bar is displayed, the startup recovery runs, but it finds no errors, fixes nothing, and then shuts down, only to recur again.  I can F8 into the Windows boot menu, but any choice that I make (safe mode, reovery mode, etc.) gives me the white progress bar with the "Windows is loading files" message, and then the startup recovery tool.  I can boot into OSx, and I can see all of the files on the BootCamp partition, but I can't boot to it.
    What did Safe Boot do to my Windows boot process?  How can I fix this?  Thanks.
    Mike

    7 GB is on the low side, you really should have minimum 15GB.
    Repairing permissions is an important part of regular maintenance, and should always be carried out both before and after any software installation or update.
    Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
    In First Aid, click on Repair Permissions.
    This only takes a minute or two.
    Background information here:
    http://docs.info.apple.com/article.html?artnum=25751
    and here:
    http://docs.info.apple.com/article.html?artnum=302672
    An article on troubleshooting Permissions can be found here:
    http://support.apple.com/kb/HT2963
    If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
    Once that is complete reboot again from your usual start-up disk.
    More useful reading here:
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://support.apple.com/kb/TS1417

Maybe you are looking for