TS2570 Macbook Pro won't boot + Rescue files + Wipe and Install

How it started: I was browsing the internet and when I clicked on a link the Macbook Pro froze so I waited 15+ min for it to get back to normal, since it didnt I decided to turn it off by holding the power button down for a fee seconds. After I turned it on again it showed a grey screen with the apple logo and it was stuck there forever.
What I have tried:
- Disconnect peripheral devices - All disconnected, still the same
- Safe Mode - It starts the same then it turns off by itself
- Reset the NVRAM / PRAM - Computer restarted with the gong and a white screen and apple logo, but it was stuck there forever (after this step I didnt see the grey screen again, instead it started showing the white screen every time I turned the Macbook on)
- Disk Utility - Tried to repair the HD but it couldnt.
- Reinstall OS X - Once I get to the screen where it tells me to choose an HD I cant continue because it doesnt show any HD to choose.
- Boot DiskWarrior (3rd party) from DVD - Downloaded and burned the DVD with my PC, inserted it in Macbook Pro, tried booting it (C key while booting), I left the Macbook stuck there all night and nothing happened.
Seems like I will have to do a Wipe & Install to restore the HD, but I teally want to rescue all my music before that. Any suggestions? I dont have a Time Machine backup.

You need this link to recover your data
Create a data recovery/undelete external boot drive
Also read this
My computer is dead, is my personal data lost?
And this link to fix your machine.
Step by Step to fix your Mac
- Disconnect peripheral devices - All disconnected, still the same
check
- Safe Mode - It starts the same then it turns off by itself
check
- Reset the NVRAM / PRAM - Computer restarted with the gong and a white screen and apple logo, but it was stuck there forever (after this step I didnt see the grey screen again, instead it started showing the white screen every time I turned the Macbook on)
PRAM holds the splash gray screen image, white screen is the same thing basically without the gray screen
- Disk Utility - Tried to repair the HD but it couldnt.
Did you try the Macintosh HD partition?, that's where your problem is
- Reinstall OS X - Once I get to the screen where it tells me to choose an HD I cant continue because it doesnt show any HD to choose.
Should be Macintosh HD partiton, since to use Disk Utiity your command r booted from the Recovery HD partition
Since you were able to boot into Recovery HD to use Disk Utility, that means the drive is working that just OS X on the Macintosh HD partition isn't booting.
If your using a external boot disk like from 10.5 or 10.6, don't.
There is one more thing to try, hook up a Ethernet cable to your router or modem (must be reset, power off/on) and use command option r keys upon boot, this (if your machine is capable) will install Recovery HD from Apple's servers instead of from the boot drive, it takes longer.
BTW your signature says you have 10.8, but this was posted in 10.6 forums.

Similar Messages

Help! Mid 2009 MacBook Pro won't boot! Just apple and the wheel keeps turning... Out of AppleCare , survived the hurricane, NOW WHAT?

Won't boot. Won't turn off. No sounds. Just wheel turning around and around. What to do???

Don't turn it off, perform a emergency backup proceedure to a new drive.
Emergency backup procedure
Drag and drop copy your users file folders (music, pictures, documents etc) to a regular external powered drive as soon as possible.
Do not use, setup or trust only TimeMachine at this troubled time as it will copy corrupted data and we need just your users files safe just in case. TimeMachine cannot be used with a Windows PC.
Unmount (right click > eject) and disconnect all external drives once the backup process is completed.
Note:
If you have any over 4GB sized files, those won't copy to a standard formatted FAT32/MSDOS drive from the factory, if you need to save these 4GB+ files use another blank/empty drive and use Disk Utility to format it 1 Partition, Option: GUID, Format: OS X Extended Journaled.
Typical large 4GB+ sized files are movies, imovie projects and raw (non-compressed) audio files. Naturally if you don't have any of these or can avoid backing them up (like you don't care about them) then there is no need to reformat the drive from FAT32/MSDOS.
Mac's cannot copy to nor format a NTFS drive. ExFAT format to be used with a Windows machine must be right click formatted by Windows, not OS X (does it wrong) XP machines can install a free exFAT update from Microsoft. Vista-Win 8 can format exFAT.
Formatting a drive will erase all data on it.
Once the backup is completed, you can take your machine to a local PC/Mac tech and they can solve your software and or some hardware issues, but if a hardware issue is determined, you should take it to Apple first as they have the electronic checker.
If you get a new machine, drive or new OS X installed as a result of this problem, then you can access your external drive backup and restore just your files if the tech support won't or you rather do it yourself for privacy reasons.
1: Connect the drive and click on the icon and Finder > Get Info
2: At the bottom unlock and "Ignore Permissions on this volume" provide your Adim password.
3: Once your files are transferred to the new account, then perform #6 Reset User Permissions here
..Step by Step to fix your Mac

Macbook pro won't boot - how do I retrieve emails?

Hey guys
I've got a common problem that my Macbook pro won't boot. Sometimes I get stuck on the grey screen with spinning wheel, sometimes on the blue screen with spinning wheel
I've scoured the internet on another machine and tried every trick I can find with the MacBook Pro including
Disk / Permissions repair from install disk (says the HD is fine)
PRAM
Single User
Soft
It seems like my only option at the moment is an Install and Archive. I can mount the MacBook Pro on another machine with a firewire and remove files and backed up a lot on a hard drive before it died
What I am worried about is how to retrieve some emails from the machine that only exist locally because I have deleted them from the server
Is there a way of doing that?
Would Migration Assistant work?
If anyone could help me with this or suggest any other methods for bring my machine out of a coma I'd really appreciate it
d

Try a different adapter. If you don't have access to a known-good adapter any other way, make a Genius Bar appointment at an Apple Store.

Macbook pro won't boot, stuck on white apple screen

Noticed today, that my macbook pro won't boot . It gets to the white apple screen with the spinner under the apple logo. It stays like this for a long time without doing anything except spinning.
I've powered down and tried to boot up several times.
I have boot camp and windows on my mac and when the white screen appears, I can press Option to bring up which hard drive and the Windows partition will load without any problems.

Exacty what happens when you try to boot up from the disc that came with your computer? Are you holding down the c key? Have you tried holding down the "option key?" Are you able to run the Hardware Test - Intel-based Macs: Using Apple Hardware Test
Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Remove any 3rd party ram.
Reinstall Lion - This will install a "fresh" copy of Lion without archiving old system files but leaves the rest of your files in place.
If your computer is still under warranty or you have Apple Care, take full advantage of it by letting tech support deal with your problems. It's what you're paying them for.
Out of warranty - take the computer to an Apple store or an AASP. Whichever is more convenient for you.

Macbook pro won't boot after installing update 10.9.3

macbook pro won't boot after installing update 10.9.3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

MacBook Pro won't boot at start. I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

MacBook Pro won't boot at start. I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

Read this article...
http://support.apple.com/kb/TS1440?viewlocale=en_US&locale=en_US

MacBook pro won't boot up Keeps turning off

MacBook pro won't boot up. When power button pressed the white screen w apple comes on w progress bar but shuts off before bar completed. If I move cursor or hit buttons it boots but will turn off if cursor stops Moving or stop pushing buttons. Just started happening. Ran hardware test and all shows ok. Any ideas??

Thanks for all the help; however, I still continue to have problems booting off of any other media.
I've tried the Apple CD w/ no success - I made an image of the apple cd and restored it to a USB drive, and it won't boot. I've tested both methods on another mac, and both options boot fine.
I'm going with my last restort here and am going to install OSX on a portable USB HD, and try to boot off of that (no clue if it will work given the outcomes of the other things I have tried). From there I'm going to backup the HD, and try DW as suggested.
Any thoughts as to why the mac refuses to boot off of any other media? It always boots halfway and then tells me I need to shutdown my mac.
Thanks again,

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear.

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.

My daughter's MacBook Pro was doing exactly the same thing. I don't know if it had anything to do with the latest update. She called me about a week ago saying that her MacBook began running slower by the day . She then called me Friday and told me that it wouldn't get past the gray screen and the gear just kept on spinning. I did everything I could over the phone including Safe mode which it wouldn't go into and thought maybe it was the hard drive. She took it to the Apple store. Originally, they also thought it was the hard drive. It ended up being a corrupted operating system (Lion). Apple genius simply re-installed Lion and she's back up and running. Good thing she backed up right before it crapped out. She'll be restoring everything tonight. Don't know if re-installing Lion will help your situation, but it did the trick for my daughter.

My 2007 MacBook pro won't boot up beyond a White screen any ideas what to do?

My 2007 MacBook pro won't boot up beyond a White screen any ideas what to do?

Odd how this hasn't been archived yet.
I'm getting the same thing with my Macbook, but can't boot past the white screen. An Apple store in KS suggested I needed a new hard drive, but I've already put two in there and it's still doing the same thing. I really don't want to buy another motherboard like I had to a couple of years ago.
My choices are either buy a cheap drive to boot from and remove the current one to put into an external case, or save the money by not buying a new motherboard and putting it as a down payment toward a Mac mini.

My MacBook Pro won't boot and apparently my HDD is locked

My MacBook Pro won't boot up. And it's says my HDD is locked when i try and reinstall OS. Help me please good people.

you want to check how many threads with same question first, and look in
Mac OS version forum that you have; and the notebook MacBook instead of the workstation forum for Mac Pro (non-laptop)
Not a lot of detail to go by with "won't boot" though.
Mac OS X Help
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Troubleshooting: My computer won't turn on
https://support.apple.com/kb/TS1367
Assume you know what your OS, how to use the Recovery Mode, and how to repair or do Safe boot and other tasks.
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
Identifying resource hogs and other tips: Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems: Apple Hardware Test
General Mac maintenance: Tips to keep your Mac in top form
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

My MacBook Pro won't restart after updating iTunes, and so the update doesn't work. I have just purchased an iPad mini and can't sync it - can anyone help?

My MacBook Pro won't restart after updating iTunes, and so the update doesn't work. I have just purchased an iPad mini and can't sync it - can anyone help

Press and hold power button for up to 30 seconds. Remove battery and reinsert then repeat.

MacBook Pro won't boot from HD or Install CD

I have a 15" MacBook Pro running Lion. It won't boot from the HD or Install CD.
1. When I try to boot it from the HD, it makes the boot sound and displays the Apple logo. The small "working" wheel spins for about 20 seconds, and then gets stuck mid-spin.
2. When I try to boot from the Install CD, I eventually get a gray screen with a large power button image and the text "You need to restart your computer. Hold down the power button for several seconds or press the restart button."
I have tried resetting the PRAM and SMC per another post, but nothing changed. I have also tried to boot it from an Ubuntu 11.10 CD, which also got stuck.
Any idea what the problem could be and next steps I should take?

My Mac started freezing (colored pinwheel) every time I tried using any application (i.e. Safari, iPhoto). After restarting for the 2nd time, it would no longer boot - makes start up sound but gets stuck on gray screen w/ apple icon. I tried resetting PRAM also - did nothing. I decided to reinstall OS; problem now is my HD is nowhere to be found! I am a tech dummy so this is way beyond my comprehension...I'm not seeing my HD from the Disk Utility either???
Side question...I backed up my files (mostly pics JPEG and videos) on DVD (had to compress to save). Why can't I open files on PC?

Mid 2006 Macbook Pro won't boot (from HD or optical)

My mid 2006 Macbook Pro will not boot from the hard disk, or from the internal DVD. I am currently running the latest version of Lion (10.7).
I tried searching the forums and found a similar issue here:
https://discussions.apple.com/thread/1687899?start=0&tstart=0
But that was with a Mac Mini. And it doesn't look like the OP issue was ever resolved. I am having the exact same problem.
When attempting a normal boot from the internal HD of the Macbook Pro. It will make the happy chime of a successful POST. It will display the Apple logo. And that's as far as she gets.
No spinning wheel, no error image, no nothing. Eventually the system will start spinning up the fans as if it were under load (this was after about a half hour of just letting it sit there).
Doing a verbose boot, it never went past this:
com.apple.driver.Apple.IntelCPUPowerManagement
Photo of verbose boot:
Here's what I've tried.
1. Bought a brand new battery (as the current one was at death's door)
2. Zapped PRAM (Apple + Option + P + R)
3. Reset SMC according to these directions: http://support.apple.com/kb/HT3964?viewlocale=en_US
4. Attempted to boot to my original Tiger (10.4) install DVD, only to stop at this point during a verbose boot (Apple V):
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style
Photos:
5. I am able to put her in Target Disk Mode (hold T at boot). Then with a firewire cable I can connect it to my wife's Macbook 13" and I am able to run disk utility on it! Disk Utility did find and repair errors, however, it still refuses to boot.
6. I attempted to boot from my wife's Macbook 13" in Target Disk Mode. I put her machine in Target disk mode. Connected the firewire cable. Powered on my 15" MBP while holding the option key. Then I selected her drive as the boot disk... however it still refuses to boot even from a known working HD.
7. Finally, I swapped around RAM DIMMs with no change in behavior.
Help! I know she's an older gal (Laptop is 6 years old now) but I'm not exactly flush with cash and would rather not give up on her just yet.

My Mac started freezing (colored pinwheel) every time I tried using any application (i.e. Safari, iPhoto). After restarting for the 2nd time, it would no longer boot - makes start up sound but gets stuck on gray screen w/ apple icon. I tried resetting PRAM also - did nothing. I decided to reinstall OS; problem now is my HD is nowhere to be found! I am a tech dummy so this is way beyond my comprehension...I'm not seeing my HD from the Disk Utility either???
Side question...I backed up my files (mostly pics JPEG and videos) on DVD (had to compress to save). Why can't I open files on PC?

My Macbook Pro won't boot up, only in safe mode!

Help, my macbook pro won't restart, only in safe mode! and it seems that safe mode has plenty of implications for use. my usb memory stick doesn't seem to be recognized while in safe mode. I was doing a cleanup on mackeeper just after I downloaded a trial version of microsoft office mac. The trial wouldn't work properly so I deleted it and decided to do a cleanup with mackeeper. than the mac froze while mackeeper was doing it's cleanup and the screen flashed black a few times. Ever since it won't boot up unless I use safe mode. Also, I downloaded the most recent updates while in safe mode but it doesn't seem to be recognizing that I already downloaded them because software update is still telling me that I have 6 updates. So I am horribly confused at this point. Please help, I need this laptop to do report cards (it's a good thing I got an extension). thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
The commands may line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it. Copy the selected text to the Clipboard (command-C). Then click anywhere in the Terminal window and paste (command-V).
find /Sy*/L*/Ex* -type f -name Info.plist -exec sh -c '/usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$1" 2> /dev/null | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo ${1%*.kext/*}.kext' {} {} \;
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 3
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, these steps are all copy-and-paste — no typing. Also remember to post the output.
You can then quit Terminal.

Macbook Pro won't boot up makes clicking sound

Hi.
After upgrading to Firefox 4 on my 15inch 2006 Macbook Pro, it froze for over 5 minutes and began to make an odd repeated clicking sound. I tried force-quitting, but that wouldn't work, so I restarted it. Now it won't even boot up fully, it just makes a similar odd clicking sound (but not as frequently).
However, the grey Apple screen does appear, along with the revolving wheel. It seems very odd though, as the light at the front of the machine goes out as soon as the machine attempts to restart, which suggests that something physical may have occured to some internal hardware.
I even tried booting up in Safe Mode, but it is no different. Also, Caps lock and Number lock keys both appear to be working, so hopefully the keyboard is still functional.
Does anyone have any ideas what may have happened. My Applecare expired about two years ago, so really need some assistance if possible.
Thanks
George

First try booting from your OS X installer DVD. If the computer boots into the installer then do this:
Repair the Hard Drive and Permissions
After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
After returning to the installer reinstall Snow Leopard. This will not erase the drive. Reinstalling takes from 45 minutes to an hour or so.

TS2570 Macbook Pro won't boot + Rescue files + Wipe and Install

Similar Messages

Maybe you are looking for