TS2570 Still cant access my computer, followed instructions to perform a safe boot and last line of script it shows: BootCacheControl: Unable to open /Var/db/BootCache.playlist:2 No such file or directory. Any idea?
Brand new Mac Book Pro
Purchased in Mexico's Department store Liverpool on June 20th 2012
Purchased Memory upgade to 8Gb, on june 27th, at Apple Store Memorial City, Houston
Upgraded memory from 4Gb to 8Gb on June 28th.
Tried to write on my external HD (previously written on a windows based PC) with no success.
Upon reccomendation from a Mac assistant, copied all my external HD contents into my Mac Hard drive.
Then formatted my external HD and copied back all my information to it.
deleted all the information from my MacBook Pro HD.
Attempted to repeat the same operation with another external HD, but got a message saying there was not enough epace on the computer HD (even though I have a 750Gb Hard Drive.
Looked in the trash bin and there it was, all the information previously deleted..
Could not empty the trash bin, although I got a message asking me to safely delete all the information from the trash bin,
Could not get enough space released, after several attpempts the trash bin was finally emptied.
All happy getting acquainted with my new MacBook Pro. Two days later, got a gray screen and not able to start the computer.
Looking in to Mac support I found article http://support.apple.com/kb/TS2570 and followed instructions to perform a safe boot:
"Perform a Safe Boot
Simply performing the Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to
see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
The following is the script that appears on the screen upon safe boot. and halt after the last line.
AppleACPICPU:Processor Id=6 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=7 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=8 LocalAplicId=255 Disabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine Policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All Rights Reserved.
MAC Framework Succesfully initializad
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x20 Vextors 64:87
ACPI: System State [SO S3 S4 S5] (S3)
PFM64 (36cpu) 0xf10000000, 0xf0000000
Aplconsole relocated to 0xf1000000
PCI configuration changed (bridge=16 device=4 cardbus=0)
[ PCI configuration end, bridges 12 devices 16 ]
Firewire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffe9b2aa2; max speed s800.
Pthread support ABORTS when sync kernel primitives misused
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDateless load succeeded
AppleIntelCPUPowerManagementClient: ready
BTCOEXIST off
wl0: Broadcom BCM4331 802.11 Wireless controller
5.100.98.75
AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitializad
rooting via boot-uuid from /chosen: 6E918706-FC0D-37460-A3A0-6268A51DF93B
Waiting on <dict ID="0"><key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleAPIPCI/SATA@1F,2/AppleIntelPchSe riesAHCI/PRT0@0/AOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlock
storageevice /IoBlockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartit
BSD root: disk0s2, major 14, minor 2
Kernel is LP64
com.apple.launchd 1 com.apple.launchd 1 *** launchd[1] has started up. ***
com.apple.launchd 1 com.apple.launchd 1 *** Verbose boot, will log to /dev/console. ***
Running fsck on the boot volume...
** /dev/rdisk0s2 (NO WRITE)
** Root file system
Executing FSCK_HFS (version diskdev_cmds-540.1~25).
BootCacheControl: UNable to open /Var/db/BootCache.playlist:2 No such file or directory
launchctl:Dubious permissions on file (skipping): /Library/LaunchDaemons
launchctl:Dubious permissions on file (skipping): /System/Library/LaunchDaemons
Any help or suggestions on what to do next would be welcomed.
I am in the middle of the Atlantick, stuck with a brand new, non working Apple MacBook Pro.
Best regards
Sergio Ramos
Reinstalling MacOS does NOT fix the problem for me. I'm still searching a solution !
Bernard
Similar Messages
-
On start up of my new iMac it locks on the grey screen with the apple logo and the progress wheel spins. Boot up in safe and this is where it stopped at "BootCacheControl: Unable to open /var/db/bootcache.playlist: 2 no such file or directory. "
Reinstalling MacOS does NOT fix the problem for me. I'm still searching a solution !
Bernard -
Mac Book Pro, late 2011. Purchased in a department store in Mexico.
Was running ok for several days after I purchased it.
Had some software installed and memory upgraded from 4 to 8Gb.
Suddenly at start up, got a gray screen with a spinning wheel and never boot.
Followed advise from http://support.apple.com/kb/TS2570 and performed a safe boot. (hold Shift-Command-V during startup instead of just Shift).
The boot sequence starts then stops and nothing happens. these are the last lines of the boot sequence.
BSD root: disk0s2, major 14, minor 2
Kernel is LP64
com.apple.launchd 1 com.apple.launchd 1 *** launchd[1] has started up. ***
com.apple.launchd 1 com.apple.launchd 1 *** Verbose boot, will log to /dev/console. ***
Running fsck on the boot volume...
** /dev/rdisk0s2 (NO WRITE)
** Root file system
Executing FSCK_HFS (version diskdev_cmds-540.1~25).
BootCacheControl: Unable to open /Var/db/BootCache.playlist:2 No such file or directory
launchctl:Dubious permissions on file (skipping): /Library/LaunchDaemons
launchctl:Dubious permissions on file (skipping): /System/Library/LaunchDaemons
For what little experience I have on Unix systems, it has to do with the libraries which cannot be launched...
Any ideas, solutions, suggestions are welcomed.
Cheers.
DipbajaBoot into Recovery (command-R at startup), launch Disk Utility, select your startup volume, and run Repair Permissions. Then reboot as usual.
-
Hi,
we are unable to boot our mac mini running the latest version of Mountain Lion (10.8.2); to try to fix we performed severals permision disk check using the recovery system (Restart your Mac and hold down the Command key and the R key [Command-R], and keep holding them until the Apple icon appears) as noted on http://support.apple.com/kb/HT4718.
The boot sequence starts then stops and nothing happens. these are the last lines of the boot sequence.
(... omissis ...)
Kernel is LP64
com.apple.launchd 1 com.apple.launchd 1 *** launchd[1] has started up. ***
com.apple.launchd 1 com.apple.launchd 1 *** Verbose boot, will log to /dev/console. ***
com.apple.launchd 1 com.apple.launchd 1 *** Shutdown loggin is enabled. ***
Running fsck on the boot volume...
** /dev/rdisk0s2 (NO WRITE)
** Root file system
Executing FSCK_HFS (version diskdev_cmds-557-393).
FIPS USER Space POST: Integrity test success!
(... omissis ...)
FIPS USER Space POST Success!
BootCacheControl: Unable to open /Var/db/BootCache.playlist:2 No such file or directory
As usual, any ideas, solutions, suggestions are welcomed.
Thank you in advance for your help and support
-- federicoBoot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin. -
Hola atodos/as. Necesito ayuda.
Mi mac boock pro no arranca y aparece una pantalla gris y una rueda girando sin cargar cuando entro con command V aparece este error BootCacheControl: Unable to open BootCacheControl: Unable to open /var/db/BootCache.playlist: 2 No such file or directory -
Bootcache.playlist no such file or directory, slow booting 10.7.2
Hi guys, I have this problem after updating to Lion 10.7.2 :
There are many threads addressing a similar problem, but all the fixes mentioned there did not work (deleting bootcache and checking access rights) and also
my problem is different, because my mac boots, after all. The others had bootloops or got stuck while booting.
When booting in verbose mode, the message
BootCacheControl:Unable to open /var/db/BootCache.playlist: 2 No Such file or directory
appears, but the system still boots - veery slow, though (about 2 minutes)
The next time it boots, it says no bootcache can be found and it builds a new one. After that it reboots by its own, without the bootcache.playlist error message, but still slow but with no problems whatsoever.
The next boot is as the first one I described, so I my Macbook Pro Mid 2010 is looping through those problems^^
Also, the file /var/db/BootCache.playlist is definetely existent, and has the following access rights: -rw------- (600) should not be a problem, should it?
Ah, and maybe I should mention, that I am using the full disk encryption Filevault2.
I hope somebody knows what to do with this vague information!
Thanks in advance!i wish I had the answer; would love to find out, as it is happening to my husband's make as well. His doesn't always boot up though. and then he gets "disk0s2: media is not present". Spent several hours on the phone with Apple today, and got nowhere.
-
DB- open: /var/imap/deliver.db: No such file or directory
Hi folks,
yesterday the mail went to ****. I was running 10.3.5. I tried reconstruct several times, even recreating imap environment using mkimap but still no luck.
I decided it's time to upgrade to 10.3.9 so I did it. I made a reconstruct again, the mail worked for 10 minutes and stopped again. I Installed mailbfr, did
mailbfr -f
mailbfr -q
still doesn't work.
mailbfr -d says:
DB->open: /var/imap/deliver.db: No such file or directory
system.log when starting mail service:
Apr 27 08:47:15 xserve saslauthd[14413]: detach_tty : could not lock pid file /var/state/saslauthd/saslauthd.pid: Resource temporarily unavailable
Apr 27 08:47:15 xserve saslauthd[14412]: detach_tty : Cannot start saslauthd
Apr 27 08:47:15 xserve saslauthd[14412]: detach_tty : could not read from startup_pipe
Apr 27 08:47:16 xserve master[14417]: process started
Apr 27 08:47:18 xserve ctl_cyrusdb[14418]: verifying cyrus databases
Apr 27 08:47:18 xserve ctl_cyrusdb[14418]: skiplist: recovered /var/imap/annotations.db (0 records, 144 bytes) in 0 seconds
Apr 27 08:47:18 xserve ctl_cyrusdb[14418]: done verifying cyrus databases
Apr 27 08:47:18 xserve master[14417]: ready for work
Apr 27 08:47:18 xserve ctl_cyrusdb[14419]: checkpointing cyrus databases
Apr 27 08:47:18 xserve ctl_cyrusdb[14419]: done checkpointing cyrus databasesIf the update didn’t complete, then you should try to properly reinstall it. The reason it didn’t complete was probably some filesystem corruption that starting up in Safe Mode may have already fixed, but you should look into it anyway, just in case.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, reinstall the update using the combo installer:
About the Mac OS X 10.4.9 Combo Update
Mac OS X 10.4.9 Combo Update for PPC
Mac OS X 10.4.9 Combo Update for Intel
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Note that Apple doesn’t mention anywhere the need to repair permissions either before or after installing a system update, not even for troubleshooting system update issues. It’s the disk itself (i.e. the filesystem) that should be verified/repaired before installing anything. Note also that no applications should be running while installing the update and that you may experience unexpected results if you have third-party system software modifications (not normal applications) installed. -
So I am trying to copy my hard drive "Macintosh HD" to an external hard drive, i want to use Terminal and have tried many ways. For example cp -r /Volumes/"Macintosh HD" /Volumes/"NO NAME". When i do it says No such file or directory. Ideas?
The reason that threadjacking is frowned on (as mentioned in the terms use which you can read by clicking the link to the right on this page) is for the most part a practical one:
By starting your own thread your problem can get individual attention, focussed on your particular set of circumstances.
By joining somebody else's thread it becomes tricky to answer more than one question at the same time, and can lead to confusion for both parties.
So if you don't mind the minor inconvenience, please start your own thread (in the correct forum) so we can get to grips with your particular problem! -
Open Dataset in Append -- Error: No such file or directory
Good day Everyone
I am opening 3 files in append:
1 )/usr/sap/SAPBP/interface/XIU/batch/CUSTUPDT72_061011123801680.E3.SUCCESS
2) /usr/sap/SAPBP/interface/XIU/batch/CUSTUPDT72_061011123801680.SUCCESS
3) /usr/sap/SAPBP/interface/XIU/batch/CUSTUPDT72_061011123801680.E3.SUCCESS
OPEN DATASET IV_FILENAME FOR APPENDING IN TEXT MODE ENCODING DEFAULT MESSAGE LV_MSG.
When i do this, 1 one the files is created and the other 2 return message: No such file or directory.
Since 1 of the files is being created, the directory cannot be invalid.
Can anyone please provide me with sugestions on how i can get the other 2 open as well.
Sincerely,
MarcHi Marc!
Did you create your iv_filename as char70? Because then name 2) would fit and names 1,3) would be too long...
As long as your coding is identical, here nothing further should go wrong.
Also your names look quite OK, you wouldn't have a typo in the other names?
Still an authority problem on OS-level can happen, but that's quite unlikely for files of same type.
Regards,
Christian -
hi every one , so im out and my iphone tried to update to the newest 7.1.1 os,woohooo. but not so much, it crashed when doing so and now i have no access to an itunes account and im pretty stuck. how can i fix this issue without accessing itunes? isit possible?
thank you guys.If you are in recovery mode, you need to restore it through iTunes on your computer. There is no other way.
-
I am trying Software Distribution by Image choosing from my Software Repository.
Getting the title as a failure from SWIM.
Need help.
katThank you for your response. It turns out I had a third party program that was changing the file designation of the .bin and was trying to mount it in a virtual drive. after turning that off it worked like a charm!
-
Rpmbuild fails with No such file or directory
Hi
OS Oracle Linux 6 Update 2 (64bit)
Linux 2.6.32-300.3.1.el6uek.x86_64
Following command fails
rpmbuild --rebuild virtualiron-4.5.16-11.src.rpm
error: File /root/rpmbuild/SOURCES/virtualiron-%{PACKAGE_VERSION}-11-src.tar.gz:
No such file or directory
Any ideas how to resolve this issue.Moderator Action:
This thread has been moved from the Oracle Linux forum
to the Virtual Iron forum, for closer topic alignment.
You don't have a Linux issue.
You seem to have a V.I. issue that is perhaps all described in the V.I. documentation. -
I am installing OIM/OAM in a cluster configuration using release 11.1.1.7.
I looked at the EDG here:
http://docs.oracle.com/cd/E28280_01/core.1111/e12035/toc.htm
And its pointing me to the 11.1.1.5 version
http://docs.oracle.com/cd/E21764_01/core.1111/e12035/toc.htm
So that is the guide I am following.
I am at this step:
18.1.5.2 Integrating Oracle Access Manager with Oracle Identity Manager by Using idmConfigTool
http://docs.oracle.com/cd/E21764_01/core.1111/e12035/wiring.htm#sthref356
When I run the config tool I get SEVERE messages like this one:
SEVERE: java.io.FileNotFoundException: ./config/jps-config.xml (No such file or directory)
Any suggestions on how to fix this ?
Please note that I can see jps-config.xml under the domain configuration in the fmwconfig directory.
Here is the complete output
Enter sso access gate password :
Enter sso keystore jks password :
Enter sso global passphrase :
Enter mds db schema password :
Enter idstore admin password :
Enter admin server user password :
********* Seeding OAM Passwds in OIM *********
Completed loading user inputs for - CSF Config
Completed loading user inputs for - Dogwood Admin WLS
Connecting to t3://admin.mycompany.com:7001
Connection to domain runtime mbean server established
Seeding credential :SSOAccessKey
Seeding credential :SSOGlobalPP
Seeding credential :SSOKeystoreKey
********* Activating OAM Notifications *********
Completed loading user inputs for - MDS DB Config
Jun 6, 2013 1:46:05 PM oracle.mds
NOTIFICATION: PManager instance is created without multitenancy support as JVM flag "oracle.multitenant.enabled" is not set to enable multitenancy support.
Jun 6, 2013 1:46:06 PM oracle.security.jps.internal.config.xml.XmlConfigurationFactory initDefaultConfiguration
SEVERE: java.io.FileNotFoundException: ./config/jps-config.xml (No such file or directory)
Jun 6, 2013 1:46:06 PM oracle.mds
NOTIFICATION: Auditing is disabled for component MDS.
Initialized MDS resources
Jun 6, 2013 1:46:06 PM oracle.mds
NOTIFICATION: PManager instance is created without multitenancy support as JVM flag "oracle.multitenant.enabled" is not set to enable multitenancy support.
Jun 6, 2013 1:46:06 PM oracle.security.jps.internal.config.xml.XmlConfigurationFactory initDefaultConfiguration
SEVERE: java.io.FileNotFoundException: ./config/jps-config.xml (No such file or directory)
Jun 6, 2013 1:46:06 PM oracle.mds
NOTIFICATION: Auditing is disabled for component MDS.
Jun 6, 2013 1:46:07 PM oracle.mds
NOTIFICATION: transfer operation started.
Jun 6, 2013 1:46:08 PM oracle.mds
NOTIFICATION: transfer is completed. Total number of documents successfully processed : 1, total number of documents failed : 0.
Upload to DB completed
Releasing all resources
Notifications activated.
********* Seeding OAM Config in OIM *********
Completed loading user inputs for - OAM Access Config
Validated input values
Initialized MDS resources
Jun 6, 2013 1:46:08 PM oracle.mds
NOTIFICATION: PManager instance is created without multitenancy support as JVM flag "oracle.multitenant.enabled" is not set to enable multitenancy support.
Jun 6, 2013 1:46:08 PM oracle.security.jps.internal.config.xml.XmlConfigurationFactory initDefaultConfiguration
SEVERE: java.io.FileNotFoundException: ./config/jps-config.xml (No such file or directory)
Jun 6, 2013 1:46:08 PM oracle.mds
NOTIFICATION: Auditing is disabled for component MDS.
Jun 6, 2013 1:46:08 PM oracle.mds
NOTIFICATION: transfer operation started.
Jun 6, 2013 1:46:08 PM oracle.mds
NOTIFICATION: transfer is completed. Total number of documents successfully processed : 1, total number of documents failed : 0.
Download from DB completed
Releasing all resources
Updated /oracle/product/fmw/Oracle_IAM/server/oamMetadata/db/oim-config.xml
Initialized MDS resources
Jun 6, 2013 1:46:08 PM oracle.mds
NOTIFICATION: PManager instance is created without multitenancy support as JVM flag "oracle.multitenant.enabled" is not set to enable multitenancy support.
Jun 6, 2013 1:46:08 PM oracle.security.jps.internal.config.xml.XmlConfigurationFactory initDefaultConfiguration
SEVERE: java.io.FileNotFoundException: ./config/jps-config.xml (No such file or directory)
Jun 6, 2013 1:46:08 PM oracle.mds
NOTIFICATION: Auditing is disabled for component MDS.
Jun 6, 2013 1:46:08 PM oracle.mds
NOTIFICATION: transfer operation started.
Jun 6, 2013 1:46:09 PM oracle.mds
NOTIFICATION: transfer is completed. Total number of documents successfully processed : 1, total number of documents failed : 0.
Upload to DB completed
Releasing all resources
OAM configuration seeded. Please restart oim server.
********* Configuring Authenticators in OIM WLS *********
Completed loading user inputs for - LDAP connection info
Connecting to t3://admin.mycompany.com:7001
Connection to domain runtime mbean server established
Starting edit session
Edit session started
Connected to security realm.
Validating provider configuration
Validated desired authentication providers
OAM Asserter already exists in the security realm
OAMIDAsserter is already configured to support 11g webgate
OIM Signature Authenticator already exists in the security realm
A type of LDAP Authenticator already exists in the security realm. Please create authenticator manually if different LDAP provider is required.
Control flags for authenticators set sucessfully
Reordering of authenticators done sucessfully
Saving the transaction
Transaction saved
Activating the changes
Changes Activated. Edit session ended.
Connection closed sucessfully
The tool has completed its operation. Details have been logged to automation.logi found this task :
JDev 11.1.1.1.0 + ADF+ BC4J application on Tomcat6 -
Vgaswitcharoo "No such file or directory"
The title says it all.
Im trying to disable my ATI gpu with vgaswitcharoo. I have debugfs mounted as instructed in the wiki. Yet still no luck with vgaswicharoo.
[dan@ArchLinux ~]$ sudo cat /sys/kernel/debug/vgaswitcheroo/switch
Password:
cat: /sys/kernel/debug/vgaswitcheroo/switch: No such file or directory
any thoughts?Dans564 wrote:i installed it but there is no test-off.sh ?
[+] modprobe acpi_call
>>> run /usr/bin/test_off.sh to test/view different acpi_call functions to see if it disables your secondary/hybrid video card
┌─[ 00:55 ][ viruszzz@pedro:~/VMz/arch ]
└─> which test_off.sh
/usr/bin/test_off.sh
EDIT: If the test_off showed an acpi_call that works for your card then it works. Are you using laptop-mode tools, some cpu freq scaling or some other power consumption optimization?
Disabling the ATI card is just one of the many power optimization you want to implement in order to get max battery life.
https://wiki.archlinux.org/index.php/Laptop
Last edited by ViruSzZ (2011-12-13 00:07:14) -
Hello Mac users,
After recognizing slowness and heat in my machine, I find
posix_spawnp("/Library/StartupItems/ProTec6b/Nalpeirond6b", ...): No such file or directory
in my system.log, but, looking in the library, well, the file isn't there. I deleted the Nalpeirond6b.plist thinking that might stop it, which it did not. What else can I do?
I'm running Leopard still, 10.5.8, having been putting off upgrading and/or a new purchase.
Thank you for your time.
Best,
Liz in TucsonHi Liz, see if this helps...
https://discussions.apple.com/thread/2531925
Be very careful if using Terminal to remove...
http://trick77.com/2010/08/08/mac-doesnt-auto-sleep-anymore-hard-disks/
Maybe you are looking for
-
[Solved] Broadcom BCM43142 Network controller - can't get WiFi to work
Hi all, I'm new to Arch and I can't set up my WiFi to work properly. Using Gnome 3 and NetworkManager, I installed the recommended driver (https://aur.archlinux.org/packages/broadcom-wl-dkms/) according to the instructions. That worked fine. When I
-
Questions about Installing Windows 7 ultimate 64 bit on Mac Pro
Hi, I have an early 2009 Quad Core Mac Pro which is running Snow Leopard. I have 4 internal drives in my Mac Pro. Does WIndows 7 have to be installed on the same drive I have Snow Leopard installed or can it be on any of my drives. My boot drive has
-
Java 8 not compatible with yosemite...is there a security hole?
I installed Java8 per Oracles instructions and it is active in my Safari preferences. However, the app pop up still appears, even when I do not have Safari or any other browsers open or running. In fact, even if I reboot the computer and do not have
-
How do I know which version of iTunes store do I have?
This is the one I have: http://www.apple.com/itunes/store/ Is that the latest one, If it is not can someone send me a link to download the newest store?
-
How to burn only a few tunes in playlist?
One thing's puzzling me please, in itunes I am trying to burn only a few songs from a playlist but I am not seeing the option to do when I right lick on the selected songs. Will itunes burn only an "entire" playlist?