TS2621 Canno send email with Comcast
Hi, I just got an Apple Ipad & IPhone 5. For some reason I can't send email through Craigslist, etc. talked to Comcast, supposedly my settings are right but it still won't work. It's really frustrating. They used to work a few weeks ago but not.now. HELP !!!
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom
Similar Messages
-
NO LUCK sending email (with Comcast) via the EDGE Network
Cannot Send E-Mail via EDGE Network
My primary email account is with Comcast, and using my iPhone with any Wi-Fi network I am successfully able to send/receive email.
However, using the EDGE network I cannot send email. I found a tip on appending a port number to the outgoing mail setting (smtp.comcast.net), but this didn't work either.
I consistently get one of these two error messages:
"Sender address [email protected] was rejected by the server"
-or-
"The connection to the server 'smtp.comcast.net' failed"
I can receive email with either EDGE or Wi-Fi networks.
Any suggestions? I need to be able to not only receive but also SEND email via the EDGE network.
Any help will be appreciated!
TimYour other option is to sign up for a free GMail account, and use their outgoing server. You need to create your account on the iPhone using the "Other" shortcut, which allows you to specify your comcast address, your comcast incoming mail server, but the GMail outgoing server. This will work with both Edge and WiFi.
-
Can't send email with large (over 1MB) attachment
Win 7 64-bit, Thunderbird 31.2.0, eSet antivirus (but disabling it for email doesn't help), godaddy email server (works fine from godaddy web mail), port 80 (been using this port for years; 25 doesn't work)
Sending email with a 974KB attachment works. Email with a 1.4MB (and larger) attachment doesn't work. The error message appears pretty quickly (5 seconds at the most).
The message is "the connection to SMTP server smtpout.secureserver.net timed out".
This problem seem to appear at random, then go away and all is well (for a while).No. The modem is an Arris obtained from Comcast on 6/9/2014 after the prior one failed.
-
TS3899 Cannot send email with new iPad air. Works fine with old iPad and iPhone.
Cannot send email with new iPad air. Works fine with old iPad and iPhone. I have deleted account and reinstalled.
Thanks. I got the problem fixed. Spent time with the Apple folks and was kicked up to a senior advisor. It seems the problem was with my internet provider - Tmie Warner. Remember I could use the old ipad and the iphone to send mail. I checked all the specifics between the three units. It seems that TW is changing over from the RR.com to TWC.com. Since the new ipad air was just set up, it fell under the new TWC mail specifics.
-
How do I use my iPhone's hot spot to send email with Mail ?
Hi,
My land line is dead ... so no phone nor internet at home. But I can use my iPhone'hot spot to get on the web from my iMac. Great ... it works !
Oups ! I cannot send email from my computer using my iPhone's hot spot with Mail.
How do I do that ?
Regards.
Robert LespéranceHi Templeton Peck,
Thanks for droping in my thread ...
Doesn't the fact that I can surf the web with my iPhone's hot spot and that I cannot use Mail normally has I normally do give you a clue what the problem could be ?
What other information can I give you other than normally I can surf and send email with my regular ISP. Now that my ISP is dead I am using my iPhone's hotspot to surf the web awaiting that my ISP's connoection returns. Surfing is OK but I cannot send emails with through Mail.
When I want to send an email from my computer, I get a message asking me to select the the SMTP server. Then I select my usual ISP server, but the message comes back telling me it does not work.
Is there any other configuration to do ? -
I'm not able to send emails with mail.ru. Receiving is not a problem. Creating a mail is also not a problem and the mail will be stored at mail.ru as still to be send, only problem is its not possible to send. I noticed the buttons for sending change colour when used but they don't perform. What it is?
Don't know what changed, but all of a sudden able to send emails by mail.ru ...... sorry for bothering.
-
I have 2 email accounts, the second i only just recently added, i was able to send an email from this account after i added the account but am not able to send anymore emails. It says "unable to send email with selected server" there are no other servers to choose from. please help! TIA
Hi apmichael,
If you are having issues sending email from one of your mail accounts on your iPhone, you may find the following article helpful:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Regards,
- Brenden -
I have Windows 7, Microsoft Outlook and PSE 13. I have used the "Share photos as embedded images" feature frequently, but today when I went to use it, it wasn't there, only the option to send email with files attached. How do I get back the ability to send emails with photos embedded. I like adding the frames and backgrounds and I think it's easier for recipients to look at the photos. Thanks for any suggestions of things to try.
GailI had a similar problem in that my wife's iphone 5 could not send pics with imessage. Had to set the settings to default to SMS or whatever. After laboring many hours on the web I coincidentally was on the phone with the internet people to question my internet speed. They changed the router channel, which is something that I am capable of doing myself. After that, the pics go over imessage. My own Iphone didn't have the problem. We are both latest IOS 7.0.6.
-
Problems sending emails with iPhone 3G and outlook exchange
I have a problem sending email with exchange. Receiving and answering mail works fine and calender updates work fine. However when I initiate an email from the phone it syncs and ends up in the sent folder in the computer but never reaches the recipient. I have tried this many times with different recipients and phones. It only happens from my iphone and ipad. Any suggestions?
Any help much appreciatedThe iPhone you returned is still syncing against your server and locking out your account. Someone possibly has access to your mail data. I'd recommend having your Exchange Administrator install the Microsoft Exchange Server ActiveSync Web Administration Tool (http://www.microsoft.com/downloads/details.aspx?FamilyID=E6851D23-D145-4DBF-A2CC -E0B4C6301453&displaylang=en) and attempt to wipe/delete/block that other iPhone.
Message was edited by: ethanm -
Is there any problem to use multiple threads to send email with JavaMail
Dear all,
I am using JavaMail 1.3.2 to send emails with SMTP, it works very well for a long time.
But one day, I found that the email service hanged and I could never send email again until I restart the tomcat. I found that the reason was a deadlock had been created, the required resource for sending email had not been released.
I guess the error is due to multiple threads are sending email at the same time. I made a test to create seperate thread for sending each email. After few days, I found this deadlock happened again. So, my question is: Can I use JavaMail with multiple threads? If not, I may need to sychronized all the thread that using JavaMail. I would like to make sure this is the reason for causing the deadlock problem.
Here is part of my code for using JavaMail:
transport = session.getTransport("smtp");
transport.connect(email_host, smtp_user, smtp_pass);
message.saveChanges();
transport.sendMessage(message,message.getAllRecipients());
which is very standard call, and it worked well for a long time.
Here is part for my thread dump on tomcat:
(Thread-339)
- waiting to lock <0x5447c180> (a sun.nio.cs.StandardCharsets)
(Thread-342)
- locked <0x5447c180> (a sun.nio.cs.StandardCharsets)
It seems that these happened after call the method transport.sendMessage() or message.updateChanges()
, and the underlying implementation may require the JRE StandardCharsets object. But the object had been locked and never be released. So, the sendMessage() or updateChanges() can't be completed.
Please give me some helps if you have any idea about it.
Thanks very much!
SiriusNote that the Nightly build gets updated daily (and sometimes more than once in case of a respin) and it is always possible that something goes wrong and it doesn't work properly, so be prepared for issues if you decide to stay with the Nightly build and make sure to have the current release with its own profile installed as well in case of problems.
See also:
* http://kb.mozillazine.org/Testing_pre-release_versions
*http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
*http://kb.mozillazine.org/Shortcut_to_a_specific_profile
*http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox -
Sending emails with both body and attachment to multiple recipients
I have a requirement to send email with body and attachment to multiple recipients.
Body of the email is a standard text. It is a proxy-to-mail scenario.
Here is what I've done: (I'm using PI 7.11)
One mapping from Source to Target structure (format of the attachment text file)
Second mapping from Target Structure to Mail Package format.
In the second mapping I'm concatenating the output of first step into "Content" of the Mail Package.
"XIPAYLOAD" is the message protocol used.
The "Keep attachments" option in the Mail adapter allows only to send "Content" as attachment or as body of the email.
How to send an email with both content and text?
The other problem is even with using ASMA, I can't send email to multiple recipients. I can only do CC and TO for 1 person each - a total of 2. Although I can resolve this by creating mailing lists, it is better if this can be addressed in PI.
Thanks for any input you can provide!
Edited by: crazylad on Jan 18, 2012 3:39 PMThank you for your response Mikael.
For the first question, I was able to find the solution in the following blog:
XI Mail Adapter : Dynamically building attachment and message body content using a simple UDF
(I just needed to search with the right set of key words )
The key is to set the "Content Encoding" as "None" in the mail adapter. If this is not done, the mail will be sent with an attachment - untitled.bin containing both the mail body and the attachment text. Also, don't forget to check the "Keep Attachments" checkbox in the mail adapter.
Multiple recipients could be added by separating the email IDs with a Comma. I have used ASMA to set the recipients. -
XI Mail Adapter: sending emails with attachment with help of java mapping
Hi ,
On trying out the scenerio mentioned in the blog, using the java mapping provided
"XI Mail Adapter: An approach for sending emails with attachment with help of Java mapping
The scenerio works just fine.
But the payload as the content of the attachment is not getting generated in proper XML format.
I suppose it's because of the replace special characters code part..
Can anyone help me state the modification required in the code.
Thanks!
Regards,
Faria MithaniIt might be a codepage issue. Is your original payload UTF-8?
-
Sending email with 2 attachments in PDF Format
Hi,
I have 2 ALV Layouts, totally different in Structure.
Now I need to convert these 2 ALV layout to 2 different PDF files and send email with thses 2 attachments.
Can anyone provide me with sample report.
I tried searching for it but there is no clue for ALV report-> PDF -> email.
Thanks
MohanHello,
I doubt if you really searched before posting. You will find many posts indicating how to convert your report output be it ALV or classical into spool and then in to pdf. After you get the pdf binary format, its pretty much the same attaching those and sending E-mail
Vikranth -
Sending email with multiple attachments
Hi forum,
I am able to send email with a single attachment using maildemo.sql from: http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html
But now I am trying to send email with more than 1 attachment and it does not work. My code that calls the above mentioned package is as follows:
<code>
PROCEDURE send (
psender VARCHAR2,
precipients VARCHAR2,
pcc VARCHAR2,
pbcc VARCHAR2,
psubject VARCHAR2,
pmessage VARCHAR2,
pnumattach NUMBER) -- The number of attachments that need to be sent
IS
p_blob BLOB;
p_filename VARCHAR2(200);
p_filetype VARCHAR2(200);
p_currSeq NUMBER;
conn utl_smtp.CONNECTION;
i NUMBER;
j NUMBER;
len NUMBER;
BEGIN
IF pnumattach > 1
THEN
conn := SEND_EMAIL_HELPER.begin_mail(
sender => psender,
recipients => precipients,
subject => psubject,
mime_type => send_email_helper.MULTIPART_MIME_TYPE);
j := 0;
SELECT seq_attach_transact_id.CURRVAL INTO p_currSeq FROM dual; -- seq_attach_transact_id is a primary key that identifies every single attachment in the table
WHILE (j < pnumattach) LOOP
p_currSeq := p_currSeq - j;
SELECT blob_content INTO p_blob FROM wwdoc_document WHERE transaction_id = p_currSeq;
SELECT name INTO p_filename FROM wwdoc_document WHERE transaction_id = p_currSeq;
SELECT mime_type INTO p_filetype FROM wwdoc_document WHERE transaction_id = p_currSeq;
SEND_EMAIL_HELPER.begin_attachment(
conn => conn,
mime_type => p_filetype,
inline => TRUE,
filename => p_filename,
transfer_enc => 'base64');
-- split the Base64 encoded attachment into multiple lines
i := 1;
len := DBMS_LOB.getLength(p_blob);
WHILE (i < len) LOOP
IF(i + SEND_EMAIL_HELPER.MAX_BASE64_LINE_WIDTH < len)THEN
UTL_SMTP.Write_Raw_Data (conn,
UTL_ENCODE.Base64_Encode(
DBMS_LOB.SUBSTR(p_blob, SEND_EMAIL_HELPER.MAX_BASE64_LINE_WIDTH, i)));
ELSE
UTL_SMTP.Write_Raw_Data (conn,
UTL_ENCODE.Base64_Encode(
DBMS_LOB.SUBSTR(p_blob, (len - i)+1, i)));
END IF;
UTL_SMTP.Write_Data(conn, UTL_TCP.CRLF);
i := i + SEND_EMAIL_HELPER.MAX_BASE64_LINE_WIDTH;
END LOOP;
SEND_EMAIL_HELPER.end_attachment(conn => conn);
END LOOP;
SEND_EMAIL_HELPER.attach_text(
conn => conn,
data => pmessage,
mime_type => 'text/html');
SEND_EMAIL_HELPER.end_mail( conn => conn );
ELSE
utl_mail.send(psender,precipients,pcc,pbcc,psubject,pmessage);
END IF;
END send;
</code>
Can anyone please tell me where am i going wrong.
Message was edited by:
MonkThe easiest is to send an e-mail with multiple attachments to yourself and then view the message in raw to see how it is formatted - how the boundaries work. what the boundary headers are, etc.
Then you use that as a template for your PL/SQL code to generate a MIME body for an e-mail that has multiple attachments.
To debug.. have your PL/SQL code send sample e-mails with multiple attachment to your account, view it in raw format and compare that to the original format you've based your template on.
And none of this is really a PL/SQL issue.. it is all about formatting a valid MIME message for an e-mail. -
Sharepoint Online - Send email with attachment
Hi All,
is there some way how to send email with attachment, which is attached to list item in host web?
I tried some of solutions but none of them not working.
Server side:
For example event receiver after added list item with attachment - Because it is office 365, in SandBox solution I can´t use SmtpClient class.
Any other ideas?
Client side:
For example client web part with REST call. It works fine until I don´t need access to attachment.
string oDataUrlAttach = "/_api/Web/lists/getbytitle('ListName')/Items(6)/AttachmentFiles('Document.docx')/$value";
HttpWebRequest itemRequestAttach = (HttpWebRequest)HttpWebRequest.Create(sharepointUrl.ToString() + oDataUrlAttach);
itemRequest.Method = "GET";
itemRequest.Accept = "application/atom+xml";
itemRequest.ContentType = "application/atom+xml;type=entry";
itemRequest.Headers.Add("Authorization", "Bearer " + accessToken);
HttpWebResponse itemResponseAttach = (HttpWebResponse)itemRequestAttach.GetResponse();
Here I get error: The remote server returned an error: (403) Forbidden.
But other calls are OK. I can get all items from my list except attachments.
Any ideas?
Thank you.Why hasn't this been answered?
Sam Ogle
Maybe you are looking for
-
Cannot put songs from one ipod to the other, playlist do not show up on new ipod page
Having trouble transferring songs from my old ipod (2nd gen) to 3rd gen ipod nano. How can I save the playlists from the ipod to put on the nano?
-
How to preview graphic files on a home web server setup?
I apologize if this question is not asked in the most technical way, but here goes: I'm read online on how to create a home web server or ftp server on a Mac computer. (I plan to do this with my G5, running OSX 10.6.4) I would like to have a library
-
Find my iphone - picture has changed from a black ipod to a white one
My son's black ipod touch has gone missing, and we've tracked it using Find My Iphone to a house 15 miles away. Strangely, the picture of the ipod has changed from a black ipod touch to a white one. Is there something that the person who has "found"
-
How to get text of exception in my program, exception is defined in FM?
I have written a function module where i have defined a couple of exceptions. If an error occurrs i raise the exception. My issue is, in my calling program, i call the function module i have created and once the exception occurrs i need to get the te
-
Hello LV-developer I started to learn LVOOP and need some help understanding overriding VIs. Actually I imlemented 4 classes: Core (dispatcher) Client (ancestor class for all clients) Q_Client (inherits from Client calss) Topic (not really implemente