TS2634 how do i disable the headphone output?

My headphone's jack broke inside the ipad headphone output. Thus my Ipad doesnt emit any sound through the speakers. I'd like to know if there is anything i can do to choose from which output I'd like to listen to its sound. In "skype" i can do this choice, for example. Thus it´s not a hardware issue....
I appreciate in advance the feedbacks.
André

I have heard of people having success using a q-tip with the cotton removed and super glue.
Put the glue on the stick, carefully insert until in contact with broken part, let glue set and remove slowly.
Personally, I would check with Apple first for repair options.

Similar Messages

  • How do I disable the headphone jack on a iMac?

    Hey my headphone broke of when it was in the headphone jack on the iMac. I've been unsing a USB sound bar that works great but I'd like to use the iMac speakers. I know there's a way of disabling the headphone jack as the OS controls the hardware. I'm running Mac OS X 10.9.3. Could you guys please give me any suggestions? Thanks

    You need to get the busted plug out of the headphone jack. Because there is a micro switch in-side the headphone jack that tells the MIDI setup to only send the sound out to the headphone jack.
    Go to > Removing a broken headphone plug - Google Search or take it to your local AASP for service.

  • How do I disable the headphone jack remote controls on my iMac?

    HI all,
    I've got an early 2009 iMac 24".  I use it with an older pair of Logitech 2.1 speakers with no inline remote controls.  The headphone jack itself or the 1/8" male connection is loose because the iMac will randomly launch/play/pause iTunes.  I'm 100% certain this has to do with the headphone jack connection.  I want to disable that remote functionality in OSX while still using my speakers, but I haven't found any documentation or information on how to do it.
    Can anyone help?  Thanks in advance.

    You need to get the busted plug out of the headphone jack. Because there is a micro switch in-side the headphone jack that tells the MIDI setup to only send the sound out to the headphone jack.
    Go to > Removing a broken headphone plug - Google Search or take it to your local AASP for service.

  • How do you disable "digital optical output" so the red light in headphone jack goes off and I can use the internal speakers?

    HI,
    I have a red light in my headphone jack and I see "correct responses" listed as "when digital output is enabled speakers are disabled." That's all well and good but doens't really help. HOW do you disable the "digital output," get the red light to turn off and be able to hear through the speakers? What's the SOLUTION to the problem. Sorry, just a bit frustrated. Any help is greatly appreciated.
    Best,
    dpeast12

    Allegedly this can occur if there is a contaminant in the headphone jack that makes the computer believe there is an optical connection there, so it shuts off the internal speakers.
    Try inserting and removing a headphone plug repeatedly. This ought to dislodge the junk, and seems to have fixed the problem for others. Hope it helps!

  • How can I disable the output of the domain name after a getent request?

    I use an iPlanet DS 4.13 to resolve the hostnames to IP-adresses in my company network. I have several scipts in use which use the getent command to resolve name to IP, but if I do a 'getent hosts hostname' I get an output like this:
    123.123.123.123 hostname.domainname
    How can I disable the output of the domainname? I just want to get back the IP-adress and the hostname?!
    Help, please?!

    The enrty in Ur DS for name to ip resolution might
    have been given in the format "hostname.domainname" for the hostname.so if U remove the domainname it would resolve to the host name only.Check the attribute field in Ur directory server where U've entered the hostname.

  • Is there a way to disable the headphone jack?

    A few months ago my macbook pro 2012 (non retina) fell and the headphone jack was destroyed in the process, and the sound on my internal speakers no longer work. The apple genius said that the only way to get my headphones and speakers working again would be to replace the logic board. What I'm wondering is if there's a command to type into the terminal that would just bypass the headphone jack entirely so that I could at least get sound through my speakers. Like I said, there's no hope of saving my headphone jack so I don't need advice about how to re-enable it. I'm hoping for a command for terminal to disable the headphone jack so that I can hear sound through my internal speakers. Help?

    Well you have to take a break, sleep, etc sometime!  The repair may take just a few minutes.
    Your other option would be search on the Fixit website and YouTube's "how to tutorials."

  • How can I disable the advancedAntiAliasing with fontswf in sdk

    Hi,
    in asc2.0 we need 'fontswf' script to embed fonts instead of use .as file directly.
    but here is a problem
    I cannt disable the advancedAntiAliasing with fontswf ?
    because I have found an issue when I set advancedAntiAliasing is true, then the textfield (which font is embeded) antiAliasType doesn't work even type is advanced. I need set advancedAntiAliasing is false (in asc1.0 you can set it by .as file)
    now i just set the sharpness and thickness to workaround in used asc2.0
    but i think that is not great.
    so how can I disable the advancedAntiAliasing with fontswf  or any other solution?
    thanks
    hbb

    Hello -
    That setting is not fully supported.  You can explicitly call it like this:
    ./compc -include-sources  ../samples/test/Main.as -output ../samples/test/Main.swf -advanced-anti-aliasing=true/false
    So, that is the compiler option that you want to use in order to disable it.  The example I show you here uses the command line tool but it is a valid switch via Flash Builder as well

  • How can i disable the internal speakers without voiding the warranty?

    The students here annoy other students trying to study, I have made an extension for the headphone so that it is mounted under the monitor, facing the front and hot glued the headphone jack to the back, but the students ripped out the extension and threw it away so that they could play very awful music and annoy everyone.
    How can I disable the internal speakers on our imacs without voiding warranty? There has to be a way!
    Thanks-

    Have you considered corporal punishment? One instructor I had in high school, when he had detention duty, played classical music an operas all during detention. He was quite "evil". He would have some slow "sleepy" music going for a bit, then it would throw in something to wake every one up like the 1812 Overture or something, and repeat this a few times...and have the music loud enough to prevent talking. Many detention-ees thought that was "cruel and unusual punishment." (LOL)
    But to your question. Since opening the case would normally void the warranty (unless you can find a empathetic Apple technician), what I would suggest is a "sleeve". Imagine some sheet metal and form it into a rectangular tube. The tube would closely follow the shape of the iMac covering all the cable ports. Then bolt the tube and iMac to the table. (Or at the very least, bolt the tube to the iMac.) Basically, make it so that there little room between the tube and iMac, that no one could access the ports without removing the tube. You'll also need to secure the cables to the tube so that no one can just pull out the cables, yet leave enough slack to allow for removal of the tube for maintenance. Even if the metal is not a full tube, but the Mac and metal is bolted to the table in such a way as to prevent access to the ports could be sufficient deterrent. If metal is not possible, then perhaps plastic or wood.
    I realize that is requires some work, and there is a drawback as pranksters could start dropping stuff inside the tube. Perhaps just have a clear plastic "wall" preventing all physical access to the Mac. Only a USB extension cable for the keyboard/mouse. Use Remote Disk sharing to mount CDs, if necessary.
    Some thoughts, anyway. Good luck!

  • How do I disable the automatic startup on HP Photosmart Premier when I turn my computer on?

    Someone else posted ths question a month ago, but still no answers.  Anyone?
    How do I disable the automatic startup on HP Photosmart Premier when I turn my computer on?
    Windows XP, SP3 operating system recently re-installed so I also reinstalled my printer software.  Now, for some reason, each time I turn my computer on, my HP Photosmart C4100 all-in-one photosmart premier software opens.  It is not in my startup.  This slows down my computer terribly, which is why I never used the program before my re-install.  How can I disable this feature?  I only print, I don't use it for photos.
    Any help here is appreciated.

    Run msconfig.exe from the start button (type in msconfig).  When it comes up go to the Startup tab and find and deselect the HP product you do not want to start.  Save and reboot computer.  Now try.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • How do I disable the hardware acceleration in Flash player on a Windows XP machine remotely?

    How do I disable the hardware acceleration in Flash player on a Windows XP machine remotely?
    I have a few hundred computers running Adobe Flash Player.
    The operation system is Windows XP.
    They are Compaq 6005 desktop PC’s, with an inbuilt ATI radeon HD 4200 video card.
    We have a persistent issue where viewing a flash video (e.g. something on youtube) causes the video card driver to crash.  You are left with no video signal to the monitor.  Audio continues and the computer still responds to commands. This only happens when watching flash video.
    We have tried:
    Updating flash plugin (numerous versions)
    Updating the video card drivers (we have tried the last three video card driver versions, including the HP drivers and ATI drivers)
    Updating the browsers (this problem happens with IE8/9 and Firefox10/11/12)
    There seems to be two ways to work round this issue.  One is to disable the video acceleration in the ‘troubleshoot’ section in the advanced part of the display settings area in windows.  The other way is to start a flash video, right click, go to ‘settings’ and untick the box marked ‘Enable Hardware Acceleration’.
    Doing either of these things allows the user to view flash videos with no apparent issues.
    Is there a way to disable the hardware acceleration in Flash without visiting the PC?  Perhaps an undocumented option in the mms.cfg file? I understand that you can use an option to skip the video card check, and so force hardware acceleration on, can you do the opposite?
    Thanks in advance
    Daniel.

    Hi.
    I have had over 200 views, and no suggestions as to how this could be fixed.
    I have also posted in the general flash forum, that thread has fewer views.
    If I should put this question in a different forum please let me know which one.
    If what I am asking is not possible is there a mechanism for escalating this issue or requesting a feature for the next version of flash?
    Thanks.

  • How do i use the headphone jack as an input on a macbook pro 9,2.... the option just isn't in the sound app.

    how do i use the headphone jack as an input on a macbook pro 9,2.... the option just isn't in the sound app.
    all i have is the internal mic option, can anyone help?
    thanks

    You should also ask this in the MacBook Pro forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/notebooks/macbook_pro

  • How can I disable the Voicemail button on an iPhone 4

    How can I disable the Voicemail button on an iPhone 4 or
    if that is not possible can i programme it to dial my own phone rather than my carrier's Voicemail box?

    No, it's not possible to disable that button and no, it's not possible to reprogram it to anything else.

  • How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again, time after time? (Windows 7 64bit US).

    How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
    I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
    I sure would like to decide about that myself.
    Thanks in advance if this will be changed.

    singmk wrote:
    Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
    Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
    Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
    Would like to hope there is some way to have control over this. Can someone help?
    Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
    My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
    You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
    Hope this can help you.
    If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

  • How can i disable the credit card from that stolen acc and register to my new account

    Hello everywone i have a big problem.. Somewone stole my apple id and changed everything (email , secret question). In that account was my credit card registered. how can i disable the credit card from that stolen acc and register to my new account ?? thanks for help

    Is it an IMAP or POP account?
    For POP accounts, you can select remove from server under the advanced tab of the account.
    Apple support article with information on receiving a message more than once:
    Mail Problems

  • How can I disable the automatic hiding of known file attachments, and why are always about 10 internet pages where I have to download something if i use firefo

    How can I disable the automatic hiding of known file attachments, and why are always about 10 internet pages where I have to download something when I use mozila firefox?
    Windows Computer

    1) If you are talking about the file names on the computer, there is a
    setting to turn off known file types. Open your file browser. Then
    just under the location bar, press '''Tools,''' then '''Folder Options.'''
    A new window will open. Select '''View.''' Look for
    '''Hide Extensions For Known File Types.'''
    2) Never NEVER '''NEVER''' download anything unless you know what
    it is. If a web site claims it needs to download something, what is it?
    It could be something like the flash player, '''or a virus ! !'''
    Ask questions, or go somewhere else.

Maybe you are looking for

  • Error while building SUP based iphone client application

    Hi, I am getting the following error while building the application for iphone simulator. I tried by changing search path settings and added libraries to Link binary search path.I really stuck here. Any body please help me how to solve it. Undefined

  • PHP form handler

    Hi, I've found a PHP form handler in one of the forums to process my feedback page. All works well but one thing I can't work out is when a visitor to the site fills in the info and clicks the submit button, that comes back to my mail box as expected

  • HELP! cannot find WATCHES pane in workshop

    hi, all, my problem is that since i accidently closed the WATCHES pane when i was debugging some piece of code, i could never opened that WATCHES pane again. while i was debugging by using break points, i could see the menu: view->debug windows->watc

  • Managed Bean Best Practices

    Hi Are there any best practices for using Managed Beans? We plan to use our own custom-built JSF components. Need to understand how to design backing beans for performance/effort optimization. For example : 1. How to make managed beans thread-safe fo

  • Integrating a index of string into button!

    Hello! I'm trying to get this code working where I want to integrate a shortcut for clicking an button made in Egde Animate. The code snippets you see is just some copied areas of the whole working code, don't need to read more code than this. Serial