TS2634 How to unlock screen rotation after 7 ISO update?

Since I've update my IPhone 5 with new 7ios can't rotate screen

very helpful, I had the same problem and now it's fixed! thanks. On my iphone 5 doesnt work by clicking twice the home buttom..

Similar Messages

  • Anyone know how to unlock my 4s after the update there is a pass code

    Help

    Hello A haggard,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Best of luck,
    Mario

  • Unlock screen rotation iPad using ISO 7

    Unlock screen rotation iPad ISO 7

    Swipe up from the bottom of the screen to reveal the Control Centre and it's the last icon in the group in the middle - it has a padlock with a circular arrow on it.
    Regards,
    Steve

  • How do I unlock screen rotation?

    How do I unlock screen rotation on iPad 1?

    Depending upon what you've got Settings > General > Use Side Switch To set to (rotation lock or mute notifications), then you can lock/unlock the rotation either by the switch on the right hand side of the iPad above the volume switch, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • How to disable screen rotation in ios7 ?

    how to disable screen rotation in ios7 iphone 4s

    Swipe UP from the bottom edge of the screen (you will see the Control Center), tap the top left icon next to the Crescent to lock/unlock screen orientation.

  • How do I verify iCloud after I updated already?

    How do I verify iCloud after I updated to software 5.0? A message about account settings keeps coming up, although setting are fine

    You should have received an email which you can follow for verification. if you haven't received one, Start here, change your country if necessary and go to manage your account. Ask for a new email to be sent to you.

  • The I-Pad screen stopped rotating otherwise the I-Pad works. How to restore screen rotation?

    How can I restore screen rotation . It stopped suddenly everything else seems to work fine.

    If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
    Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, double tap the home button and swipe to the right and look for the lock icon all the way to the left.
    If the screen is unlocked but still will not rotate, reset the iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • How To Stop Screen Rotating When Tilting

    That's the question...
    How Do I Stop The Screen Rotating When Tilting?  Drives me nuts!

    Try double clicking the Home button and on the bottom row of the screen go completly to the left past the mucic control and tap on the circle arrow.  That will lock the screen rotation.  This works for the 3 and 4 G iPods. There is no rotation lock for the earlier iPods.

  • URGENT!! I need to know how to unlock screen orientation besides control center ios 7

    the bottom of my digitizer is bad and i need to unlock screen orientation with using control center ASAP i cant contact anyone without being able3 to turn my screen sideways

    Hi Anna,
    With iOS7 on an iPhone, you lock the rotation by bringing up the control center and selecting the "Lock Rotation" icon. To bring up the control center, swipe up from the bottom of your screen. You should see a translucent display with the control center options:
    http://www.apple.com/ios/design/
    See the "You know a good design" part in the article above.
    Cheers,
    GB

  • How to unlock screen navigation sensor

    How to unlock the monitors rotate settings or unlock monitor navigation sensor

    There are no such settings or options available.

  • How to restore safari bookmarks after osi update

    how to restore safari bookmarks after ios. update

    The only way is to restore from a useful backup, if you have one.
    If you sync the iPad to iTunes and use Time Machine regularly, you would likely have the appropriate backup to restore from. In that case:
    Restore the iPad backup set from Time Machine from a date before you overwrote the bookmarks. The location of the backup is ~/Library/Application Support/MobileSync/Backup/ (you can get to it by pressing Cmd+Shift+G in the Finder and entering this path).
    Connect the iPad, run iTunes and restore from the backup.
    If you use iCloud Backup, then you can restore from iCloud and choose which date's backup you'd like to restore from. You can check if you're using iCloud Backup by opening the Settings app on the iPad, then going to the iCloud submenu and looking at the status right below "Storage & Backup", where it would say "iCloud Backup is off." (or "iCloud Backup is on.", as the case may be).
    In any case, keep in mind that restoring from a backup means you lose all application data changes after the date of the backup.
    Also see Restoring from a previous iCloud backup.

  • How to close my app after last update

    I can't close my app with normal way after last update
    Need help for this
    Thx

    You still double-click the home button to open the multitasking bar, but you now drag or swipe the app 'screens' up from there and off the top of the screen :

  • Dual screen problems after last updates

    Hello everyone,
         it was long time since our Arch gave me some problems, but then now I'm fighting furiously with dual screen configuration with new gnome. Let me explain.
    I upgraded the home PC that I hadn't update for months, so I updated more or less everything ... kernel, nvidia drivers, gnome, etc..
    The PC has always been dual screen (no twin view, without xinerama), two screens (one on a LCD monitor and one on a TV) where I could run separate applications independent.
    Now, after the update, when I launch any application in the second screen (the TV) it starts on the first (screen).
    Obviously I have't made any changes to xorg.conf before and after the upgrade. I also tried to recreate one with the nvidia-tools but nothing ...
    Can you help me? Someone had the same problem?
    I post my xorg.conf, I hope that someone has a hint. I can no longer watching movies on TV and it is very annoying!
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 1.0 (buildmeister@builder63) Wed Oct 1 15:10:25 PDT 2008
    # Auto-generated by Archie mkxcfg
    # Auto-generated by Archie mkxcfg
    #Section "DRI"
    # Mode 0666
    #EndSection
    Section "ServerLayout"
    # PS/2 Mouse not detected
    # Serial Mouse not detected
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 1024 0
    Screen 1 "Screen1" LeftOf "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "USB Mouse" "CorePointer"
    EndSection
    Section "Files"
    # Additional fonts: Locale, Gimp, TTF...
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    FontPath "/usr/share/fonts/cyrillic"
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    # Load "type1"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    # Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "freetype"
    Load "record"
    # Load "synaptics"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    Option "Xinerama" "0"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "it"
    Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "Serial Mouse"
    Driver "mouse"
    Option "Protocol" "Microsoft"
    Option "Device" "/dev/ttyS0"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    Section "Monitor"
    # Warning: This may fry old Monitors
    # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Samsung SyncMaster"
    HorizSync 30.0 - 81.0
    VertRefresh 56.0 - 75.0
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    ModeLine "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
    ModeLine "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
    ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
    ModeLine "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
    ModeLine "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
    ModeLine "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
    ModeLine "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
    ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
    ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
    ModeLine "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
    ModeLine "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
    ModeLine "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
    ModeLine "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
    ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
    ModeLine "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
    ModeLine "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
    ModeLine "1280x1024" 191.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
    ModeLine "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
    ModeLine "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
    ModeLine "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
    ModeLine "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
    ModeLine "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
    ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Unknown"
    ModelName "TV-0"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nvidia"
    VendorName "All"
    BoardName "All"
    EndSection
    Section "Device"
    Identifier "Videocard0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 7300 LE"
    BusID "PCI:4:0:0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "Videocard1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 7300 LE"
    BusID "PCI:4:0:0"
    Screen 1
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 7300 LE"
    BusID "PCI:4:0:0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "Device1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 7300 LE"
    BusID "PCI:4:0:0"
    Screen 1
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "TwinViewXineramaInfoOrder" "CRT-0"
    Option "metamodes" "CRT: 1280x1024 +0+0; CRT: 1024x768 +0+0; CRT: 800x600 +0+0; CRT: 640x480 +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    # Removed Option "metamodes" "TV: nvidia-auto-select +0+0"
    Identifier "Screen1"
    Device "Device1"
    Monitor "Monitor1"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "TwinViewXineramaInfoOrder" "TV-0"
    Option "metamodes" "TV: 1024x768 +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Writing the post a tried to install fluxbox, and then... all ok. In fluxbox all works fine. I think this is a problem related to the new gnome screen configurer.
    I post an image of gnome screen configurer vs nvidia-tools.
    Googling around I found that new gnome screen configuration (using xrandr) is not compatible with nvidia drivers. Could be this the source of the problem?
    Help please
    Last edited by frullino (2008-10-25 13:17:29)

    Hi,
    Does your Mac go to the sleep status when you close the cover? If so, the remote session can be terminated due to time out and the time out value may be redesigned in the latest versions.
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Unlock my phone after operatng update

    unlock my iphone after operating system update

    We are all fellow users and not Apple employees so cannot do anything like unlock an iPhone for you.
    Was your iPhone unlocked before the iOS update?  If not, you must deal with your cellular service provider to unlock the iPhone, only the carrier can do an unlocking.
    If the iPhone was unlocked and got locked in the update process, take the iPhone to an Apple store genius bar where they can check the IMEI number against those that have been unlocked.  They can then deal with the unlocking.

  • HT5624 how to open disabled ipad after installing update

    help me to open or wipe clean my ipad which was disabled after system update in which the computer says i entered 4 digit pin of which i did not enter
    i tried itunes but it cant connect due to it being disabled.  is there a phone number i can call.

    Hello there, rickh.
    The following Knowledge Base article provides the assistance you are looking for:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    In the future, if you'd like to contact Apple directly a great place to start is:
    Apple - Support - Product Selection
    getsupport.apple.com
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for