TS2634 i got a blue usb cable from apple sale they had and now it doesnt work

i got a blue usb cable from a sale that apple was selling and 1 month later it wont work and its in good condition so i dont know does a plle have a blue usb cable

Take it back to where you purchased it and ask for a replacement or refund. You are not addressing Apple here. We are all just users like yourself.

Similar Messages

  • I got my apple tv in July and now it doesnt work? its very slow and now I cant play anything off my computer on to my tv why?

    I got my apple tv in July and now it doesnt work? its very slow and now I cant play anything off my computer on to my tv why?

    If that magnet was strong enough, it may have damaged your hard drive. You'll have to bring it in and see if you can get it repaired/replaced.
    ~Lyssa

  • TV display shows USB cable from apple tv and iTunes logo. Otherwise completely unresponsive! what can be done to revive apple tv?

    TV display shows USB cable from apple tv and iTunes logo.
    Otherwise completely unresponsive! what can be done to revive apple tv?

    That is telling that the Apple TV is in recovery mode and needs to be restored. This is done by connecting to iTunes via micro USB.
    Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

  • TS2771 i updated my ipod ,but before it work completely the screen turn blue,then white and now it doesnt work even if it charge. So, what do i do? PLEASE ANSWER MY QUESTION PLEASE TELL ME WHAT TO DO

    i updated my ipod ,but before it work completely the screen turn blue,then white and now it doesnt work even if it charge. So, what do i do? PLEASE ANSWER MY QUESTION PLEASE TELL ME WHAT TO DO so i todd what others did then i did it but it kept showing the apple sign and now turn to blue again the turn yellow now white. Apple please fix it i havent been able to be gone at all past few days because of this also tries to connect with my labtop didnt work whats up with it. for people who didnt update it wait until they fix it beleive me

    it still blinking with the apple sign

  • I have plugged my iphone into my mac computer to restore the phone and it restored then went to the start menu as a new phone does then asked if i wanted to resync from uploaded data from a previous save, then i pressed resync. and now it doesnt work.

    I have had this problem before but apple didnt know how to fix the problem so they replaced the phone.
    I plugged my Iphone into the computer and went into Itunes and restored the phone because it wasnt working properly. it saved my data and then when it turned itself back on after the restore it was at the main menu when u get a new phone and have to set it up, so i went along and did the normal selections as i did when setting up the phone and when it got to where you choose to set up as a new iphone or restore from previous date with data i chose the restore option, it then said i had no service and the sim card was not compatable for the phone, i turned the phone off and it still says the same thing, im not sure what to do and im very annoyed with how it has happened a second time and ive only had the new phone for about three to four weeks now if that.
    what do i do?

    I went back to iOS 7 and my backup file is restoring but when its done nothing is on my phone still and only takes 11-15 minutes to restore the backup instead of taking 25+ minutes like usual so I guess the backup is corrupted. How can I fix this?

  • I took a still shot from old movie in iMovie and now want to work with it on desktop.  How?

    I took a still shot from an old family movie in iMovie.  Now it is a still in my project library of iMovie.  How can I copy it and put it on my desktop where I can email it?  I need to get it out of iMovie and onto my desktop.  Help!

    See this User Tip for how I do it.
    https://discussions.apple.com/docs/DOC-3231

  • HT4108 ok so i got the GSI HDMI Cable Adapter for my iphone 4s and it wont play anything i bought from itunes as far as movies???

    ok so i got the GSI HDMI Cable Adapter for my iphone 4s and it wont play anything i bought from itunes as far as movies???

    I just bought a GSI HDMI Cable Adapter for my IPad2, which is running IOS 8.  The adapter is not even recognized by the ipad.

  • Am I the only one that has had every charging cable (for my iPhones and my iPads) fail? Very frustrating. I got used to quality products from Apple but seems the small stuff is being overlooked nowadays.

    Am I the only one that has had every charging cable (for all of my iPhones and all of my iPads) fail? Very frustrating. I got used to quality products from Apple but seems the small stuff is being overlooked nowadays!

    I have yet to have a cable for my iPad 3, iPad 4 or iPhone 5 fail. I have multiple cables for each device without any failures.

  • Disconnecting USB cable from E51/notebook PC

    I'm using PC Suite ver 7.1.18.0 with Windows XP Professional and connecting my E51 to the notebook PC via a DKE-2 USB cable. All functions work perfectly (at least those I want), but a previous version of PC Suite gave me the standard "Safely Remove USB Mass Storage Device" function on the Start Bar. Since updating PC Suite including the latest drivers, I no longer get this icon. The only way of disconnecting the phone from the PC is by just removing the cable and I have always been under the impression that this can damage the USB device. Is closing PC Suite before disconnecting sufficient to avoid damage to my phone?

    You could also try these steps before unplugging your usb cable from your pc:
    1. click the safely remove hardware (green arrow pointing down) found on the right portion of the taskbar.
    2. select the usb cable
    3. then click stop (once you click stop, it informs you that you could now safely remove your usb cable from your pc.)
    As for unhooking your N70 from the usb cable, the suggestion from previous messages is the best way which is by gently bending it downwards.
    Hope this helps.

  • I just bought an ipod touch 4th generation recently,found that it is very difficult to plug and unplug the USB cable from my ipod.Does anyone have this problem?

    I just bought an ipod touch 4th generation recently, found that it is very difficult to plug and unplug the USB cable from my ipod. Does anyone have this problem?

    Some of the Dock connector cables have very small buttons on the rounded adge of the plug, which need to be pushed in to release the plug from the iPod. Look at the picture below, do you notice the "button" on the white connector edge? There's one on the other edge too and they both need to be pressed in to release the "evil looking spike" sticking out of the grey edge.
    The shorter plugs (that I've seen) do not have the release mechanism, the plug simply pulls out.

  • Do usb cables from older ipods work with the ipod touch?

    I have several older OEM usb cables from older ipods, but they don't seem to want to fit into my new Touch.  I don't want to break it.  The body of the end that goes into the unit is smaller than the old ones.  Have the plugs changed?

    Never mind.I found the same question answered several other times.  Thanks, folks!

  • System hangs up on plugging the USB cable from SCXI1600 into my PC

    Hello there,
    My PC hung up twice during installation on plugging the USB cable from SCXI1600 into my PC.  I have installed Labview 7.1
    followed by NI-DAQmx 7.4 drivers.  I then plug in the cable into one of the USB ports and then switch the power on on the chassis,
    SCXI-1000.  My PC immediately goes into safe mode switches off and turns back on.  I do not know why this has happened.  It has worked
    fine prior to this.

    Morning!
    I figured out why my system was switching to safe mode and shutting the moment I plugged in the USB cable from my SCXI-1600.  That was the instruction coming in from Norton Anti-Virus which saw the power and data coming through the USB as a serious intrusion into the system and automatically shuts down even without asking me.  I now need to know how to change the setting on the Anti-Virus to recognise SCXI as a client on my computer.
    Thank you to anyone thinking about this prob.
    Cheers.

  • Disconnecting usb cable from N70

    Is there a knack to disconnecting the cable from the phone? When I try it seems to get stuck and I'm worried about causing damage by pulling

    You could also try these steps before unplugging your usb cable from your pc:
    1. click the safely remove hardware (green arrow pointing down) found on the right portion of the taskbar.
    2. select the usb cable
    3. then click stop (once you click stop, it informs you that you could now safely remove your usb cable from your pc.)
    As for unhooking your N70 from the usb cable, the suggestion from previous messages is the best way which is by gently bending it downwards.
    Hope this helps.

  • Flash accidentally got uninstalled from my pc laptop (Chrome), and now won't even load websites so I can't download it.  Can I copy it from my desktop?  Or how do I get it back onto my laptop?

    Flash accidentally got uninstalled from my pc laptop (Chrome), and now it won't even load websites so I can't download it.  Can I copy it from my desktop?  Or how do I get it back onto my laptop?

    Hi micha164,
    I am curious to know how did Flash Player get uninstalled from Chrome? If you can please share steps to reproduce how your Flash Plugin got Removed?
    Also, Can you open chrome application Goto Chrome://plugins and See if Adobe Flash Player Plugin is Disabled? If yes, kindly enable Flash Player Plugin by clicking the [blue colored]enable link and restart the browser to see if the changes have reflected.
    Because Flash Player cannot be uninstalled from Chrome using any uninstaller, as it is embedded part of the app installer/update and can only be removed if you remove the plugin reference from the location on disk. Possibility is that your plugin got disabled and did not get enabled after that.
    Please see if it helps. If the above does not work then the only resolve is to update Chrome app. Please let us know if your query got resolved or not.
    Piyush

  • TS1702 Using an iPad camera connection kit and a MIDI to USB cable to interface a MIDI keyboard with GarageBand. It works flawlessly... almost...

    I'm using an iPad camera connection kit and a MIDI to USB cable to interface a MIDI keyboard with GarageBand. It works flawlessly... until I use the sustain pedal. Once the pedal is depressed while playing a given note, from then on, the pedal itself plays the note every time it is depressed. It's not the keyboard or the pedal. I've tried others. That leaves the app or the connection between the iPad and the keyboard. I find it hard to believe I'm the only person who is experiencing this problem. Anyone have a fix?

    Yes.  There are a ton of write-ups on how to do the connections.   I connect my m-audio Keystation 61 es through the CCK to my iPad and use GarageBand to control it.  Some keyboards require a powered USB hub to make things work.  I use a belkin 4 port hub in my own setup.   Here is a link to tested / verified keyboards that work via the CCK:  http://iosmidi.com/devices/
    Hth

Maybe you are looking for