TS2634 ipad keyboard does not seem to be working. I have recharged it ---what else should I do?
My keyboard attachment to the ipad does not seem to be working. It has been recharged. Is there anything else I should be doing?
When you plug in earphones, or anything in the audio output port, it should be reflected in SYSTEM PREFERENCES>SOUND. If not, try a PRAM reset.
http://support.apple.com/kb/HT1895
Ciao.
Similar Messages
-
I have the oringinal ipad, it does not seem to support ios6 and will not connect to itunes, WHY is this?
Start here... http://www.apple.com/support/iphone/assistant/itunes/
-
I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?
Kowhai wrote:
Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using. -
how is my laptop working even though I spilled iced tea on it? The keyboard does not light up but works normally, and everything else seems to be in order! The front of the bottom is hot while the rest if mildly warm. I don't know if its going to have a problem in the future. I wiped off as much as I could with a cloth and left it open and upside down for 10-15 minutes. Any idea if I am in the clear?
Please make a Genius Appointment and take it in for service. Do not wait.
-
Ipad keyboard does not give me enough room to type
ipad keyboard does not give me enough room to type
Try hold keyboard key down to split or undock keyboard.
-
"Item Help Subscription" does not seem to be working
Hi All,
I am on APEX 4.0.1. and trying to use the feature "Item Help Subscription" which does not seem to be working.
Here is what I have done.
-> Created a forms page (page 2) that has an item 'P2_NAME'. Define the "Help Text" for that item.
-> Created another forms page (page 3) that has an item called 'P3_CUST_NAME'.
-> In Page Definition for Page 3, Clicked on 'Edit All' icon under 'Items'
-> Clicked 'Utilities' and selected 'Item Help Subscriptions'
-> For Item 'P3_CUST_NAME', clicked on the LOV under 'Subscribe To' field and selected 'P2_NAME'
However when I am clicking on 'Apply Changes' to save the changes, it is not getting saved. The 'Subscribe To' field appears blank even after applying changes.
What I want to know is - is it a bug or have I missed something ? Is anyone using this feature successfully ?
Any pointers or help will be highly appreciated.
Thanks & Regards,
Ashish Agarwal
http://www.asagarwal.comHi Ashish,
I had created Item Help Subscription that you had mentioned.
But I don't have any problem with this. It creates successfully.
I am using Application Express 4.0.2.00.06
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1 -
appletv - the airplay window on iphone 4gs and ipad gen2 does not show the mirroring slider? any one know what im doing wrong?
ccooper52
check out the tips and video at the bottom of this link and see if any of it helps
http://www.allabouthomeelectronics.com/apple-tv-airplay.html
Apple policy requires we mention we might benefit or profit somehow by your visit
please let us know if this helped -
HT4890 Photo Stream does not seem to be updating on my PC. What should I do?
Photo Stream does not seem to be updating on my PC. What should I do?
Try signing out and back in to the iCloud control panel.
-
My photo stream does not seem to be working as before with the new PHOTOS update. Some of my devices are not getting the uploads/downloads, anyone have this problem?
Recommend that you post your question in "Photos".
Remember, Photos is not a replacement for Aperture. -
My operating system does not seem to be working
My operating system does not seem to be working properly. The system preferences cannot be accessed and itunes won't work either.
My mac is OS X Version 10.4.11 so is quite old.Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Let us know if that helps or not, or any other problems. -
HT1766 My touch screen does not seem to be working. The slide to unlock will not slide
My touch screen does not seem to be working. I can not slide to open my phone or slide to turn off.
You have tried restarting, right? Also, try holding the home and sleep/wake buttons together for at least 10 seconds, until the Apple logo appears. See if that helps. If it doesn't and you think this is a hardware problem, taking it into the Apple Store is your best bet.
-
Good afternoon. Today I stopped to make a purchase in the App Store. wrote that the card does not fit, I live in Ukraine. Tell me what I should do.
I've never seen such an error before. I think you're using the serial number instead of the redemption code?
There should be a scratch off code on the back. -
hi I just bought the airport express, plugged it in and opened my airport utilities on my macbook and it doesn't seem to recognise it anyone have an idea what I should do?
If you are trying to configure the AirPort Express using wireless, you must first log on to the wireless signal that the Express is broadcasting to establish a connection.
Look for a wireless network with a name like Apple Network xxxxxx where the "x" could be a number or letter. No password is required to log on.
Most folks find it easier to temporarily connect using an Ethernet able as stic suggests in his post....if you have one handy. Once the device is configured, you can disconnect the Ethernet cable. -
Since upgrading to the lastest iOS on my first generation iPad, the keyboard does not pop open when I need to type. The only way I can recover it is to turn off the iPad and turn it back on. This is getting annoying as it is happening constantly.
Anyone have any ideas of the cause or solutions?I thought it was in the accessibility section, but now that I think of it the last time I saw it was when I was pairing the Apple Wireless Keyboard, so it's probably automatic via Bluetooth. If the OP turns off Bluetooth the internal keyboard should start working again for reasons mentioned in your initial post. A lot of people have been locked out of the iPad because they'd use a Bluetooth keyboard and forget to turn it off, and then later they'd go to use the iPad but the iPad thinks you still want to use the Bluetooth keyboard instead of the internal one.... so the internal one never pops up.
-
%@ page import="..." % does not seem to be working correctly
Hi,
I am running Weblogic 6.1 sp1 and I am having a problem with import page
directive. <%@ page import="my.package.*" %> does not appear to be working
correctly when I try to reference classes in imported packages (my.package,
etc.) from the useBean tag.
The following code works with Resin, but not Weblogic:
<%@ page import="my.package.*" %>
<jsp:useBean id="errorBean" class="ErrorBean" scope="request"/>
If, I take out the page directive, and change the useBean tag to:
<jsp:useBean id="errorBean" class="my.package.ErrorBean"
scope="request"/>
then the page compiles and runs just fine.
Michael
Here's a snippet from Sun's j2ee tutorial
(http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/JSPBeans4.html):
<jsp:useBean id="beanName"
class="fully_qualified_classname" scope="scope"/>
But I agree with you, the excerpt you posted seems to include the
useBean tag, which is misleading.
Nils
Michael Hill wrote:
>
> I don't think this is the way it is "supposed" to be. Here is an excerpt
> from the JSP Syntax reference on http://developer.java.sun.com
> on the page directive:
>
> import= "{ package.class | package.* }, ..."
> A comma-separated list of one or more packages that the JSP file should
> import. The packages (and their classes) are available to scriptlets,
> expressions, declarations, and tags within the JSP file. You must place the
> import attribute before the tag that calls the imported class. If you want
> to import more than one package, you can specify a comma-separated list
> after import or you can use import more than once in a JSP file.
>
> ---
>
> It says the packages are available to tags within the JSP file as long as
> you place the import before the tag that calls the imported class. In my
> case, I am placing the import before the <jsp:useBean> tag.
>
> Michael
>
> "Nils Winkler" <[email protected]> wrote in message
> news:[email protected]...
> > I'm pretty sure that you have to specify the fully qualified class name
> > in the useBean tag. import won't help you here.
> >
> > Nils
> >
> > Michael Hill wrote:
> > >
> > > Hi,
> > >
> > > I am running Weblogic 6.1 sp1 and I am having a problem with import page
> > > directive. <%@ page import="my.package.*" %> does not appear to be
> working
> > > correctly when I try to reference classes in imported packages
> (my.package,
> > > etc.) from the useBean tag.
> > >
> > > The following code works with Resin, but not Weblogic:
> > >
> > > <%@ page import="my.package.*" %>
> > > <jsp:useBean id="errorBean" class="ErrorBean" scope="request"/>
> > >
> > > If, I take out the page directive, and change the useBean tag to:
> > >
> > > <jsp:useBean id="errorBean" class="my.package.ErrorBean"
> > > scope="request"/>
> > >
> > > then the page compiles and runs just fine.
> > >
> > > Michael
> >
> > --
> > ============================
> > [email protected]
============================
[email protected]
Maybe you are looking for
-
Tcode FV60, edit the park vendor invoice
Hi, In the Tcode FV60, edit the park vendor invoice, when try to save the document giving the error " Enter tax base amount for the account ABC in the company code". the account ABC has been used in the line item. How to solve this ? Thanks , Vidya
-
Error in creating oracle module
hi, I work with oracle warehouse builder 10g and my database is 10g too. I try to create oracle module. in the last step I made new location and click finish. I recieve following error : Internal Error :SQL Exception.Please contact Oracle Support wit
-
Blurry Points in Slideshow in Premiere 11
I created a slideshow in Photoshop 11 and now am creating a DVD with Premiere 11. The pictures are clear and crisp prior to creating the DVD, but on the DVD are blurred. When previewing in Premiere as the picture is coming out of the transition it
-
Do we have grounds for a lawsuit?
We came to an agreement with the collection agency that we'd pay the balance in full for immediate removal of the account from all credit bureaus. This was a written agreement which we have documentation of. Its been over five months since we've paid
-
Export to flash swf from Slide Show module
If I work on a stunning slide show, with music et al, It would be perfect if I can export to a swf file and put it on a web site or left to clients on a CD. Otherwise, as is now, I have to work twice: create a slide show and then a web flash site...