TS2634 ipod has horizonal lines, and will not respond, anyone please?

i pod touch has horizonal lines, and will not let you turn it off (will not respond) PLEASE HELP?!?!?

Press and hold both the Home and Power buttons until it restarts.

Similar Messages

  • Ipod has white screen and will not respond

    IPOD touch has a white screen and is froze.  Will not connect to computer to start factory settings.  How do I fix this?

    Hey Woolley13!
    I have an article for you here that can help provide you with some further troubleshooting steps for this issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Display shows a white screen
    Try turning iPhone off and then on again.
    If the iPhone will not turn off, try to reset it.
    If that doesn't work, try restoring the device.
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Slide to unlock has parallel lines and will not function

    slide to unlock has parallel lines and will not function

    Hello there, Jennings48.
    The following Knowledge Base article offers up some great steps for troubleshooting issues with touchscreen response and links to additional information as well:
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My ipod screen is white, and will not respond to any actions

    My ipod touch screen is white, and will not respond to the home button or the sleep/wake button. The battery never drains all the way, and syncing on itunes doesn't help. I would prefer not to restore it, because i have a lot of information on it. PLEASE HELP!!

    The battery has to drain eventually. Be patient. Letting it drain and charging it back up after it goes black should fix this.

  • My ipod has shut off and will not come back on, i have pluged it in and still nothing what do I do?

    I have a ipod touch and it shut off and will not come back on. I have pluged it in and still get nothing what can i do?

    Let it charge for an hour or two.
    If it doesn't Coe back on, try a Reset.
    Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).

  • Ipod screen is white and will not respond to buttons, nor will it reset. Help!

    Can someone please help me?  My ipod touch 4th Gen. just froze as I was trying to view information on a Free Music Ap.. Now the screen is white and the buttons do not work, nor will it let me reset it.  I connected it to my computer, hoping that Itunes or Apple would cause it to reset but it is still unreponsive.  I can't even force it to turn off.  Can someone please help?!  Thanks in advance!

    Let the battery fully drain. After charging for at least an hour try:
    iOS: Not responding or does not turn on
    If not successful time for an appointment at the Genius Bar of an Apple store.

  • My iPod nano, 5th generation is frozen and will not respond. There is a charge, was just used 2 hrs ago, and has a song showing on the face but will not turn off or respond

    MMy iPod nano 5th generation is frozen and will not respond.  There is a picture of a an artist on it, it has a charge, was used fine 2 hrs ago, won't turn off ?..

    Good Afternoon CPilkington1,
    If your iPod nano is unresponsive, follow the troubleshooting steps below:
    Apple - Support - iPod - iPod nano (5th generation) Troubleshooting
    http://www.apple.com/support/ipod/five_rs/nano5gen/
    If the issue is not resolved after following the steps outlined in the Troubleshooting Assistant, please reply to this post with additional information or any error messages that may appear.
    Regards,
    - Judy

  • HT1212 My Ipod is reading Ipod diabled connect to itunes but when i connect it tells me it has a passcode and will not let me do anything

    My ipod reads Ipod disabled connect to itunes. When i connect to itunes a box appears on the computor screen and will not access the ipod and says it has a passcode and will not let me try to enter a passcode into the ipod? What can I do?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up      
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store         

  • HT1414 my ipod has a solid color on the screen and will not respond at all what do I do?

    I was playing a game and the it just went to this screen that is kinda red and will not respond at all. I have tried to connect it to itunes to restore it but it never shows up. Is there another way to reset it? Right now I am just waiting for the battery to die.

    Try here:
    iOS: Not responding or does not turn on
    If not successful then do as you are doing, let the battery fully drain. After charging for at least an hour try again.

  • Since downloading iOS 8 on my iPad 2 it has stopped working and will not connect to iTunes

    Since downloading iOS 8 on my iPad 2 it has stopped working and will not connect to iTunes to do a restore.  I have tried to do a reset using the sleep button and home key and all I get is a white band across the screen and then it boots into the main system but it is just a series of white lines going across the screen, how can I do a restore on this?

    Hey dbwithers,
    Thanks for the question. I understand that you are experiencing issues with your iPad after attempting to update to iOS 8. To isolate these issues, let’s try placing your iPad in recovery mode and attempting a restore with iTunes:
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • My ipod has a black screen will not turn on or reset

    my ipod has a black screen will not turn on.  Will not reset per ipod instructions.  no battery picture when plugged in

    Try restoring...
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
    If you have problems restoring...
    iPhone and iPod touch: Unable to update or restore

  • I just downloaded 10 songs and now trying to burn them to a CD, but it keeps popping up (an error has occurred (2131) ) and will not burn??  What do i do?

    i just downloaded 10 songs and now trying to burn them to a CD, but it keeps popping up (an error has occurred (2131) ) and will not burn??  What do i do?

    another messge popped up "Itunes can not connect to this iPhone(iPod).An uknown error occurred (0xE8000084)."

  • IPod Touch will not power up and will not respond to itunes when plugged into a computer

    iPod Touch will not power up and will not respond to itunes when plugged to computer, have tried holding both buttons down for 10 secs like support suggest but nothing has happen. Any suggestions?

    Try the other actions here:
    iOS: Not responding or does not turn on

  • What does this message mean? "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired"

    What does this message mean? "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired"  I get this when I try to repair permissions in disk utility.

    It's an innocuous error you can ignore. It was introduced with previous updates for ARD and/or Java before Lion. These are messages, not errors. They will cause no harm, and they will be repeated each time you repair permissions.

  • TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

    I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one?  Also, the software is not updated as the computer hasn't worked for about 2 months. 
    Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well?  It is not saved in the cloud.
    Thanks for your help, it is much appreciated.

    You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
    But it would be a mistake to simply put the old HD in the new computer.
    These are the steps:
    Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
    Put it in a cheap enclosure
    Connect it the new computer
    Boot up new computer.
    If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
    Obviously chose the second option (another HD connected to this Mac) and follow prompts.
    If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
    Message was edited by: Mike Boreham...added sec on line

Maybe you are looking for

  • Capture of excise invoice nfrom dealer in depot plant

    Hi,   I have one scenario,  we have depot plant generally we capture the excise invocie with J1IG  and one custom transaction ZJ1IG,  one  our vendor  who is a dealer  has given  the price as below Material Price  :  100 (inclusive  of excise duties)

  • Link Tool in 3D PDF - possible?

    I think I already have this question answered for myself (I think the answer is no), but I wanted confirmation from more experienced users than myself. Is it possible to use the link tool in a 3D pdf?  I have successfully linked to a 3D pdf, but I wo

  • Removing Photo Folders from "Photo Browser"?

    Per the instructions in Mail Help, I dragged some photo folders into the Photo Browser window to use with Mail stationery templates. Now I want to remove the photo folders from the Photo Browser window and can't figure out how. I've tried dragging th

  • Wireless DMZ with foreign wlc - EoIP - anchor wlc

    Hi, We are trying to setup a a segregated DMZ wireless network. I've attached a simple topology to illustrate. So we have foreign controller and anchor controller. Firewall ports UDP16666,16667 and IP97 have been enabled and EoIP tunnel itself is up.

  • Why won't my new device connect to iTunes when I plug it in to a USB?

    I'm trying to sync my new iPhone, but the device doesn't show up on my iTunes account, any tips on how to fix it?