TS2634 No sound through headphones with iPad mini

My iPad mini will not work with headphones. It worked once and now the sound still comes out of the speaker when the headphones are plugged in. What am I missing to make them work?

if the sound is still coming out of the speaker, it's not recognizing that the headphones are plugged in. Make sure they're plugged all the way in. There may be a bit of lint or something pushed down into the headphone jack that keeps them from going all the way in, use a flashlight and see if you can see anything...
Are your headphones going all the way in when you plug them?

Similar Messages

Really low volume on headphones with iPad mini iOS 8.2

Hello,
Problem is with an iPad mini running iOS 8.2. When I connect any headphone/earbud to my iPad mini I can't hear a thing. Actually the sound is not totally muted but really really really low, almost imperceptible. The headphones are fine -tried them on mac/pc/iPhone-. I've tried with different headphones (at least 5 different sets), tried adjusting the volume max-low-max (I can see volume bar on screen showing headphones), plugging unplugging the headphones -also plugging them very hard-, restarting the iPad by turning it off pressing and holding lock button and then sliding to power off, rebooting it holding lock and home button together. None of these have solved the problem. iPad speakers are fine. This issue happens with every app with sound: Videos, Music, YouTube, FaceTime, etc. I recently upgraded the software to iOS version 8.2. I'm sure this worked in the past.
Any help would be highly appreciated.
Thank you.
Laura.

Unless you've accidentally set a volume limit within music settings, there's probably a problem with your headphone jack. You should also try a complete restore of your iPad just incase. Otherwise, since you've tried everything else, it sounds like its a hardware problem

X-FI 3D positional sound through headphones with CMSS

UPDATE: To Creative employees
Please respond to this thread and try to sort this issue. Is bad sound from "headphones"+CMSS On due to a limitation of the hardware (is the sound quality degradation compared to "2/2. speakers"+CMSS On due to a much more complex algorithm of 3D positional sound mixing)?
Is there a way to adjust the speaker angles in Calibration tab of THX Console to more than 60 degrees (I would definitely consider a hexediting hack as a viable solution, whatever works)?
I have this problem with X-FI Fatalty. Maybe someone knows what to do about it... I'm trying to get 3D positional sound to work through regular stereo headphones using CMSS 3D. The way I have it set up is as follows:the win xp Control Panel is set to 5., X-FI audio console is set to "headphones" or "2/2. speakers", and CMSS 3D is enabled at default settings. It does work - the 5. sounds from, say, a game is downmixed to stereo with 3D positional effects mixed in (sounds coming from behind are of a different tone, and actually sound like they come from behind). There are problems however.With "headphones" setting, the sound quality is atrocious - the sound is muddy and boomy. The 3D positional audio effects work great - I can pinpoint every direction from which the sound is coming fairly accurately. Note that without CMSS 3D, the "headphone" setting sounds great.With "2/2. speakers" setting, the sound quality is normal (sounds great on my HD555 headphones), but the 3D positional audio effects are not good - audio control panel in X-FI software allows only a maximum of 20 degrees setting for the angle between the speakers, whereas 80 degrees would be required to simulate 3D effects through headphones (X-FI software has two settings for that actually, (+/-)60 degrees maximum for each speaker, with the reference angle of zero degrees being directly in front of the listener - directly in between the two speakers).So my questions is this. Has anyone figured out how to either improve the quality of the sound with "headphones" setting, or increase the angles of the speakers to (+/-)90 degrees (80 total) with "2/2. speakers" setting?
Message Edited by acrh2 on 0-3-2006 0:45 PM
Message Edited by acrh2 on 0-3-2006 0:46 PM

The only possibility that I can think of is that 2/2. mode is NOT as simple as headphone mode with crosstalk cancelation. Perhaps the HRTF only kicks in for sound sources outside of the arc directly in front of the listener. If that were the case, you wouldn't percei've any distortion for sound sources in front of you.
Also, you are wrong regarding DirectSound3D. Keep in mind that Direct3D and DirectSound3D are not the same. The whole point of OpenAL and DirectSound3D is that they present an API to the programmer through which there is NO specification of the number of speakers. When using OpenAL or DirectSound3D, the only thing a programmer can do is specify the location of a mono sound source in 3D space relati've to the listener. The speaker settings for your DirectSound3D or OpenAL device will then determine how this sound is "rendered" by the soundcard. It is not under control of the game. For example, if you have 5. speakers and the 3D position is behind you, the SOUND CARD will make the decision to use the rear speakers. If you use headphones, the SOUND CARD will decide to apply an HRTF to create the illusion of a rear sound source. The point is that the game does not have control over how many speakers you will get sound from.
However, to further complicate the situation, there are SOME games (HL2 is an example) where DirectSound3D is used, BUT the sound output of the game itself IS a function of the Windows speaker settings. This is not how programmers are SUPPOSED to use DirectSound3D. I've written about this countless times. There is a good post on [H]ard|Forum about this. Do an "advanced" search with my username (thomase) looking for the terms "hl2" and "cmss".

5.1 sound through headphones with music player?

5.1 works great through the headphones when you're watching a video on the net. Does not work when listening through the music player. I get an error message that says I need to turn the effects off. Ok..done what I can and still no luck. Oh yea, unplug the headphones and then try to press the 5.1 icon, and it says it can only operate in headphone mode. Any suggestions?

I'm not entirely sure what you did to turn off effects, but you'll need to...
1. stop playing your audio file
2. press menu
3. select more
4. select settings
5. select Equalizer
6. select Normal
7. press the back button (the looping arrow button)
8. select Effect
9. select Normal
That should do it. When you press the 5.1 button after doing that, you should get a slightly different sound that sounds more like 5.1.

No sound from Apogee Jam with iPad mini and Lightning-30 pin adapter

Hello everybody.
I'm trying to use my Apogee Jam with iPad mini but I am unable to hear any sound from it. Jam seems to work, since the led become green and react to the guitar signal. I tried two different guitars and different cables but nothing changes. Jam also works perfectly on MacBook Pro and garage Band, so I first assumed the issue was in the iPad or in the Lightning-30 pin adapter (genuine).
Oddly on AmpliTube I can tune the guitar, so some signal arrives to the iPad, but I can't do the same on JamUp, where the tuner seems not to reiceve any signal. Are there some settings I should check on the apps?
Thanks for any suggestions!

Make sure you have the monitor input turned on in GarageBand. http://youtu.be/Eb8bN3tExio

The video sound faster than video ipad mini, this happen when I download the iOS 7.1 to my iPad mini, how can I fix that?

The video sound faster than video ipad mini, this happen when I download the iOS 7.1 to my iPad mini, how can I fix that? Or just wait till Mac release a new version update, also some game and apps doesn't open or when open they close, please help!!!

Start by closing all apps and resetting your iPad and see if that helps with any of your issues.
To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it. Close all of the apps on the iPad this way.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.

How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.

If you synced it many times, you have to have a backup. It's just a question of how old that backup is now. When did you last sync?
First of all launch iTunes on your computer and go to Edit>Preferences>Devices. Do you see any backups for you iPad in that window? If so, how new is the newest backup? That will be the backup that you will want to use. But remember that if you use that backup and it is one month old, you can only restore from that date back in time. Anything that you did on the iPad in the past month will not be in that backup.
Turn on the new iPad Minin and start activating OTA via WiFi. You will get to a certain point in the process where you will be given the choice to Set up as new, Restore from iCloud - or Restore from iTunes. You will want to select Restore from iTunes.
That is the short and sweet version. There are step by step instructions in this article. This applies to the mini as well as the iPad 4 or the iPad 3 for that matter.
http://www.everythingicafe.com/how-to-set-up-new-ipad/2012/03/16/

ISE 1.2 Profiling with iPAD Mini and Chromebooks

Anyone run into issues with profiling device properly with iPAD mini and Chromebooks. Recent testing with customer shows that ISE was not able to identify the devices properly. We have a case opened with Cisco, they came out with a patch for Chromebook last week but still broken, continuing to pursue with TAC. Just wondering what others have came across.

Hi Tarik,
Thanks for the reply. I am testing this for Mike. We have setup ISE 1.2 ( running latest patch 4) for wireless BYOD
Issue: Chrome Book Device Registration - Not Supported
Issue: Chrome Book Profile - Unknown
Probes Enabled - DHCP / RADIUS / HTTP / SNMP

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Hi,
I have the check box on a second Partition but not on the Time Machine one
I forget what I did now to get this called "Recovery HD"
For the rest try https://discussions.apple.com/docs/DOC-4055 User Tip that links to Pondini's work on Time Machine.
10:17 pm Friday; May 2, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Why youtube streaming is slow with ipad mini?

Why youtube streaming is slow with ipad mini?

How to Fix a Slow iPad
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-A-Slow-iPad.htm
iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
 Cheers, Tom

How i can connect ipad with ipad mini via bluetooth

how i can connect ipad with ipad mini via bluetooth?

for what purpos?
this is what bluetooth profiles ios devices support out of the box
http://support.apple.com/kb/HT3647?viewlocale=en_US&locale=en_US
but there maybe more features supported by apps from app store as a bluetooth profiles such as PAN give the client server possiblities

Cannot view embedded images in emails with iPad mini

Hi there - I can't view embedded images in emails with iPad mini. Any reason why?
Can anyone help?

I am having the same problem + I cannot download pdf attachment effectively.
This all happened after I upgraded the iOS to 7.x. In iOS 6.x, everything was working fine. I was able to see all the images in the email and, when I clicked on the pdf attachment, it would ask me if I want to save the pdf file to iBook. Right now, I cannot have either ones working.
I am using iPad 2.

Can i use mirroring (atv) with iPad mini?

can i use mirroring (atv) with iPad mini?

You can use an iPhone (if your carrier supports it) as a personal hotspot for your iPad and use the phone's cellular connection to go online with your iPad - your iPad will see the phone as a wifi network.
If you are asking if you can share an internet connection from a wifi-only iPad then you can't, only cellular models potentially allow you to share its connection with other devices/computers.

TS1702 I bought a apple ipad mini recently, I am unable to connect/Pair my Nokia C5 Phone with Ipad Mini Via Bluetooth. Plz suggest.

I bought a apple ipad mini recently, I am unable to connect/Pair my Nokia C5 Phone with Ipad Mini Via Bluetooth. Plz suggest.

iOS: Understanding Personal Hotspot
http://support.apple.com/kb/HT4517
 Cheers, Tom

HT1338 iMac with OS x 10.5.8 upgrade to run with ipad mini

Currently running OS X 10.5.8 on an iMac6,1 (Processor Name:Intel Core 2 Duo). Need to upgrade software to sync with Ipad Mini, can I go straight to Montain Lion, or what are the required steps? Thanks

You need to buy a Mac OS X 10.6 DVD and then run Software Update. No further OS upgrades are needed; if it matters, that Mac can't run Mountain Lion.
(78042)

TS2634 No sound through headphones with iPad mini

Similar Messages

Maybe you are looking for