TS2634 Problem with original sync / charge cabel

Hello. I have problem with my original sync / charge cabel. I have two ipod touches. 1st and 4th generation. From start my cable works great with my 4thG iPod but when I charge 1stG iPod several times then my 4thG iPod said that accessory is not supported. Now on 1stG it's working fine but I am not able to charge my 4thG iPod. Help me with this.
Thank you
John J.

See the not-charging topic of:
iPod touch: Hardware troubleshooting
Have you tried another cable?
Another charging source? Does iTunes see the iPod when you connect to your computer?
Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and cracked or broken plastic.

Similar Messages

Problems with original wall charger

I have problem with my wall charger. It can't charge my iphone, however it can charge without problems other iphones. My iphone can charge via notebook. Anyone have similar problem? Software is 2.0, iPhone is 2G.

My PlayBook charger works flawless with my Torches, 9700, 8520, HS 500, HS 700, VM 605.
If its wonky with two of them, might be the charger.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Problems with mobileme syncing ...

Hi everyone. I'm having massive problems with mobileme sync with my iphone, my macbook and MacPC G5. Essentially I want the iphone contacts and calender data to overwrite anything on laptop and pc but I keep getting message that contacts couldn't be synced due to inconsistent data. Despite me overriding it. I'm not sure how I go about confirming that the computers data is valid and actually whether I want to because its the iphone data I want. Then despite saying its synced calenders its not updating on my macbook or PC ... any suggestions gratefully received. Its doing my head in! Oh I'm on Leopard OS.

Hi Chris, Thanks for the advice, I haven't tried that yet. Will do so and pray that it will work. This however doesn't solve the problem of appointments I'm putting on my iphone not updating on PC and laptop - they do however update on mobile me cloud! Any advice greatly appreciated!

Problem with config sync between two CSM-S modules

Hi everybody,
I have a problem with config sync between two CSM-S modules.
I am using CSM-S software version 2.1(8).
The acitve module is used in a 6509 with WS-SUP720-BASE supervisor running software version 12.2(18)SXF12a.
The standby module is used in a 6509-V with VS-S720-10G supervisor (no VSS setup) running software version 12.2(33)SXI3.
Failover seems to work fine:
switch-active#sh modu csm 2 ft
FT group 1, vlan 398
This box is active
Configuration is out-of-sync
priority 150, heartbeat 3, failover 40, preemption is on
switch-standby# sh modu csm 2 ft
FT group 1, vlan 398
This box is in standby state
Configuration is out-of-sync
priority 80, heartbeat 3, failover 40, preemption is on
The command (on active side) "hw-module contentSwitchingModule 2 standby config-sync" leads to following result:
switch-active:
2010-04-14T16:21:45+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56042: Apr 14 16:21:44.223: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Bulk sync started
2010-04-14T16:21:45+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56043: Apr 14 16:21:44.251: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configurations to Standby CSM, this may take several minutes!
2010-04-14T16:21:46+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56044: Apr 14 16:21:45.995: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:21:51+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56045: Apr 14 16:21:50.831: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:21:57+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56046: Apr 14 16:21:56.151: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56047: Apr 14 16:22:58.791: %CSM_SLB-3-REDUNDANCY: Module 2 FT error: Active: Manual bulk sync timed out
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56048: Apr 14 16:22:58.803: %CSM_SLB-3-REDUNDANCY: Module 2 FT error:
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56049: FT CONFIG SYNC: Failed config sync entity send
switch-standby:
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2475: Apr 14 16:21:44.232: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Bulk sync started
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2476:
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2477: Apr 14 16:21:44.240: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: STANDBY:Configuration is being received, This may take several minutes!
2010-04-14T16:21:49+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2478: Apr 14 16:21:48.824: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Receiving configuration from Active CSM
2010-04-14T16:21:54+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2479: Apr 14 16:21:53.964: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Receiving configuration from Active CSM
2010-04-14T16:21:59+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2480: Apr 14 16:21:58.852: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Started clearing configuration
2010-04-14T16:21:59+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2481: Apr 14 16:21:59.400: %CSM_SLB-4-REDUNDANCY_WARN: Module 2 FT warning: Standby: Config Sync does not save running-config to startup-config
2010-04-14T16:22:00+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2482: Apr 14 16:21:59.400: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Previous configuration are being deleted from supervisor
The last log message on standby device seems to be correct - there is no CSM configuration after the attempted config sync.
Our configuration includes about 3500 lines and it is really uncomfortable to keep in sync manually.
Maybe someone has the same problem?
kind regards,
Christoph

Hi Christoph,
I am running into the exact same issue. Upon further investigation I've discovered that this is a known bug, CSCtd09117. You can read more about it here: http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd09117 . Apparently this is fixed in ver 12.2(32.8.11)SX323 .
I haven't had a chance to upgrade yet, so I can't verify the fix, but if it works for you please let me know.
Regards,
Brandon

Please i nedd help my account do not let me put any credit card and said that I have some problem with a past charge bur wonr let me pay any way, so i cant down load anything please what can i do

Please i nedd help my account do not let me put any credit card and said that I have some problem with a past charge bur wonr let me pay any way, so i cant down load anything please what can i do

go to this page and cotact iTunes store and they can help you out with this
https://expresslane.apple.com/Issues.action

Problems with iCal syncing

I had this problem with my original iPhone and I also ran into it this morning while using my new iPhone 3G.
While syncing the iCal events to my phone, iTunes basically says it is syncing continuously. I actually went to bed one night with it saying it was 'syncing Calendar events' and when I woke up it was still doing the same thing.
I don't know if it is because I have events in there, like birthdays or PayDays, that have it as a yearly or weekly cycle, and don't have an ending date or if there is something else causing the problem. I've tried changing the end dates to the end of this year, but it didn't help.
So I was wondering if anyone else was having this problem, or had a solution to it. Any helpful feedback would be greatly appreciated.

I have not experienced the same, but I suggest resetting the sync history on your Mac as a first step. This is done with iSync preferences with the iSync application in your Applications folder.
After selecting reset sync history, restart your Mac and try again.

Problems with Audio Sync and Rendering

In both problems what happens is NOT consistent. If were, would think was a setting or something I was doing wrong.
About the rendering problem. I capture either through FCP Log and Capture or through my analog to digital "box", Formac Studio TVR. In both cases record in DV setting. When I then Import these files about 3 out of 4 times they need full rendering. But doing all things the same, there is that 1 out of 4th time where no rendering is needed at all. Does not seem to matter whether I capture through FCP or Foremac. Results seem the same. Like I said to begin with, if was consistent would figure that is just how the program is. But due to the time it takes to do a render, sure would be nice if could be avoided some way.
Regarding the Audio Sync. At times, maybe 1 out 10 times, the audio is bad. It begins at the beginning of the film being out of sync maybe two or three frames. But then every 10 minutes of film it progressively get's worse, losing a good 6 to 10 frames as one goes. I can fix by doing a lot of cutting and then moving the film around till it is in sync again, but as you can imagine takes a LOT of extra work. Any ideas as to why this is happening and what could be done to prevent in future??
Thanks in advance for any help you can provide.

I've used flip4mac for about a year and have had no problems with it. I mostly use it to export preview versions for windoze people. The quality is very good, though it takes significantly longer to export than a similar-quality quicktime movie.

Problems with iTunes syncing with Apple TV 1st gen

all of a sudden today I am having problems with itunes 10.6.1 syncing with apple TV gen 1. Everything was fine when I upgraded itunes and iphoto 11.
Today the apple TV shows up in devices but when I try to sunc it manually (it won't start autmatically even though it is supposed to,
I get a message
If you try to sync content your Apple TV (1st generation), this alert appears in iTunes: "The Apple TV '(Your Apple TV's name)' is not responding. Check that any firewall software running on this computer has been set to allow communication on port 3689."
My firewall is turned off. I operate Lion on my laptop
Please help. seems like I had this issue before but do not remember what caused this and how it was resolved

I have a similar problem. ATV1 (3.0.2), itunes 10, connected via wireless time machine (hardwired to router) + airport express wireless extender. ATV showing in itunes menu. All TV shows, movies, music etc showing on ATV (not sync'd) EXCEPT 4 episodes of one TV show that was purchased as a series on iTunes (not on the ATV).
I have also had the firewall error - intermittently.
Have rebooted iMac. Have factory reset ATV and re-set up. Tried just sync'ing the 4 episodes I want to watch. No luck. Tried marking episodes as watched. No luck. rebooted everything. Twice.
ATV1 accesses all other info on iTunes (music, movies etc).
Infuriating.
Any ideas?
Message was edited by: CMFIELD

Intermittent problems with iphone 3g "charging not supported"

I notice quite a few complaints about intermittent 'charging not supported' messages.
I have been getting the same message on my iphone 3g.
I have ELIMINATED the cord and plug as the problem in this case by the following method:
I found that by LOWERING the line voltage to the charger with a variac, I could get rid of the message RELIABLY for a period of time.
By turning the variac off and on, and by varing the voltage setting, I can reproduceably get either charging or 'charging not supported'.
Since there are no changes being made in the connections to the phone and charger, I eliminate them as causing to the problem.
I suspect a deteriorating component in the charger is reporting some kind of error to the phone via some communications channel.
I have not tried opening the charger, but if and when it finally dies, I will do so.
This morning, the charger worked with the variac set to 80 volts.
Anyone on the design team around that can suggest other tests?
-bz-

The unit finally failed and I opened it up. It appears to consist of an AC-->dc converter with suitable filters and regulators and a small computer that probably talks via I2C or a similar protocol to the iphone.
I suspect that components are defective and the output voltage is outside the range it thinks it should be or some problems with the communications cause it to send an erronious message in response to the query sent by the iphone. I did NOT see any obviously bulging electrolytic capacitors, but I did not test for high ESR and I suspect that is the problem.
A 'off brand' AC Charger of iPod and iPhone from Radio Shack works fine while BOTH authentic APPLE iphone 'tiny cube' chargers are going for recycling.
Software fixes may cause the iphone to either keep trying until it gets the right response or ignore the erronious responses.

Problems with calendar syncing

I am having problems with my calendar syncing... my iPad has the correct date/time, and so does my computer (Mac Pro with Snow Leopard). I use Entourage 2004 on my computer for my calendar. I have the sync on Entourage to sync with iCal, and then in iTunes I tell it to sync with the "Entourage" calendar in iCal.
So when I tried to sync both my iPhone (which always worked before) and my iPad, all of a sudden people's birthdays were a day off, and then it went and duplicated all my calendar entries.
I managed to delete the duplicates with some scripts, and got Entourage looking right. I told Entourage to overwrite iCal's calendar. So both of them looked good. I told iTunes to overwrite the iPad's calendar with the iCal calendar...
and so my "all day" entries on the iPad are now spanning 2 days, and people's birthdays are 2 days off. I have NO idea what the stupid thing is doing, everything is correct in Entourage. But I need to get my calendars working. Please help!!

It turns out that I may have not waited enough time for the wipe of all of my existing calendar appointments to sync through.
I created a few more in outlook, deleted them, checked via the office 365 web calendar they were deleted.
Then I waited another 15 minutes, created the Exchange/Office365 account from scratch, and magic I appear to be back!
(until something else goes wrong that is)

Problems with laptop when charging!

Hello,
I noticed that this might be a common problem with HP model. I have been trying to make my laptop (Pavilion dv7, bought less then a year ago) to work as it used before for a week now and still can't manage.
It seems that the Laptop is not charged, if switched on, and battery is empty (less or equal to 9% of charge). However when I turn it off, after some time (IMPORTANT: not immediately after), it starts charging.
However I noticed that Battery does get charged when it is still 75% charged. This happens even when doing heavy duty work (Power Plan set to High Performance, 1 Virtual Machine running, 20 YouTube videos, and Playing DVD).
I tired all tricks in the book (un-install battery driver and re-install it [done automatically from Windows7], Remove battery when switched off, turn it on with only adapter, switch it off again, attach battery and plug in adapter, etc). However although these seem to work once ot twice, the problem always re-appears!
Personally I still can't figure if this is a software or hardware problem! I do not thing the battery has any problems since after it is charged, without any the adapter it gives me full 2 hours of heavy duty work (Virtual Machines, Streaming Videos, etc). Also the battery check tells me that the battery health is “Good”, which means it should be charging correctly.
Does anyone know what the problem might be?
Regards,
Simon J.

Hi,
I did as you suggested. I allowed the battery to drain (10% charged) and connected the adapter. As usual it did not want to charge. At this stage (that is what adapter connector but battery not charging) I did a battery health test using HP Support Assistance installed on Windows7 by default. This told me that battery should be replaced and gave me a warranty id.
After this I downloaded the system BIOS by downloading it from the HP Support & Drivers site (http://welcome.hp.com/country/us/en/support_task.html). After this (with the adapter connected) I installed the new BIOS driver. This when ready restarted the computer. I turned the computer on again to confirm that the correct version of the BIOS was installed. Note that at this stage the battery still did not start to charge and therefore I turned the computer off and followed the steps given above to hard reset the battery. When I inserted the battery and connected the adapter the battery started to charge immediately. After turning on the computer I did a battery health test and this time the test said that battery health was good.
I then waited until battery was fully charged and allowed it to drain up to 10%. Again when I connected the adapter the battery did not charge and in Windows 7 it tells me “plugged in, not charging”. If I do a battery test at this point (adapter connector but battery not charging) I get the message that battery has to be replaced and I am given the warranty id.
Is there anything else I can try!?

Problem with mcbook retina charger

i have problem with my mcbook retina charger. it is not recognised. The light didnt show up. Also ive tried cleaning tge pin area. But still, it didny work. Since my mcbook has run out of battery, i couldnt set the tge SMC thing. Are they any suggestions?

It could one of three issue, the cable, the charger, or the iPad. I'd take it into the Apple Store if you have one near you. If you have additional cables and chargers, swap them out and determint which is causing the issue.

Having Problems with iphones syncing with iTunes

First off, I restored my old iphone 3gs so that i can use just for music purposes, after restoring it would not show up onto itunes. I also have a iphone 4g which is always synced with cloud. I ejected my Iphone on accident trying to figure out the problem with my previous iphone. Now i have two iphones that wont show up in itunes and wont sync. any suggestions???

Hello Jbartrain,
I found a few articles with steps to help with your iPhones not being recognized in iTunes on your Mac. I recommend reviewing the following resources:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Having problem with iPad sync getting pop up message as below. The iPad cannot be synced because there is not enough space to hold all of the items in the iTues library (additional 10.03 GB required). There is enogh space be it in PC or on iPad.

Having problem with i Pad sync getting pop up message as below. The i Pad cannot be synced because there is not enough space to hold all of the items in the iTunes library (additional 10.03 GB required). There is enough space be it in PC or on i Pad. Why and What can be done to resolve, please advice appreciate. Thanks

It generally means - just using random numbers for examples - the iTunes on your computer holds 45 gig of content, you have a 16 gig iPad which has 13 gig of free space and the content just won't fit.
Easy solutions. go into iTunes and 'manually manage' your content. I believe this is in the main summary tab for your device (connect your device, click on the icon in iTunes to access controls for your iPad
You may also need to choose to manually control content in both the music and movie tabs.
Apple - Support - Manuals
the manual will have more specific info for syncing and controlling content

TS2634 Problem with original sync / charge cabel

Similar Messages

Maybe you are looking for