TS2634 sound does not come from accessories connected to headphone jack ipad mini

When connecting headphnones to my ipad mini no sound comes out. Is this a fault or do i need to change a stetting?

They are plug in all the way but no sound through

Similar Messages

  • Phone makes "morse code" sound when in use, not all the time but quite frequently. The sound does not come from the speakers, infact it comes from the comments inside the phone.

    When in use my phone makes a quiet buzzing noise coming not from the speakers but the actual phone. It does not do it all the time but it is quite frequent, my phone is an iPhone 5. Please can you tell me what the problem  is?

    Make an appointment at the Genius Bar to have it evaluated by the techs there. This is not normal and is probably not something that a user can fix.

  • Recently i noticed that the sound is not comming from my i phone 4s so i needed to restore it as it was earlier. So i decided to do it by restoring it without itunes. Now it is taking too long to restore it. Can anybody Tell me what problem i am facing???

    recently i noticed that the sound is not comming from my i phone 4s so i needed to restore it as it was earlier. So i decided to do it by restoring it without itunes. Now it is taking too long to restore it, it is still going on since 3 hours . Can anybody Tell me what problem i am facing???

    Which software did you use to restore it, if you didn't go with iTunes?

  • I am getting no sound on my macbook pro. The sound does not play when I plug in headphones either.  I have tried making it louder quieter, restarting my computer, HELP!

    I am getting no sound on my macbook pro. The sound does not play when I plug in headphones either.  I have tried making it louder quieter, restarting my computer, HELP!

    There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
    1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
    2. If your model has an audio-out (headphone) port, and anything is plugged in, unplug it before putting the system to sleep.
    3. If you've installed something called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and reboot. You should do that even if the software is not causing the problem, because it's useless.
    4. If you've installed an equalizer called "Boom" or anything similar, update or delete it and reboot.
    5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
    6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
    7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Reboot and test.
    9. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    10. Reset the NVRAM.
    11. Reset the SMC.
    12. Reinstall OS X after backing up all data. For a possible shortcut, see this thread.
    13. Make a "Genius" appointment at an Apple Store.

  • Having a MBPr late 2013 and having a sound problem the sound does not come tom the headphones even its all the way up and when i remove the headphones it docent come out the internal speaker either ? any idea how i fix this?

    the sound do not come out the headphones sometimes altho its all the way up in the setting and when i remove the headphones the sound doesnt come from the internal speaker either and only a reboot fixes the problem and thats annoying! any idea how tto fix this?

    Hello. I've been able to play sound without problems through headphones or external speakers to date - the output always switched to these automatically until today. Now, sound output continues through internal speakers even if I plug in headphones or external speakers.
    - I tested the headphones and speakers on other devices: they work fine.
    - When I plug in headphones or speakers into the audio output port (I have verified that I'm not using the input jack) the devices are not detected and are not listed under the output tab in system preferences-sound.
    I concluded from this that I probably had a problem with the audio port, so to test that I tried the following. I plugged a powered multi-USB device with ports for microphone line-in and headphone line-out into the USB port and switched it on. I verified that it was working by plugging a USB stick into the multi-USB device - this was recognised successfully, so the device was clearly working. I then plugged in headphones and speakers into the audio line-out on the multi USB device - but still no sound came through them (and tey were not listed among output devices) and the Mac continued using internal speakers.
    What should I do? Does the latter test suggest that the problem does not lie with the audio port, or is my test not conclusive? What would you advise?
    Many thanks indeed!
    NG

  • Sound does not come out of iPod but can hear it with ear phones.  What happened

    CCannot get sound from iPod except from earphones.  What has happened?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar

  • TS4113 Is there a terminal or other type of workaround to allow sound to come from the HDMI and headphone jack at the same time?

    I have a late 2012 Mini, running 10.8.2.  I have a set of powered speakers plugged into the headphone jack.  My TV is running on a direct HDMI connection.  I can only stream sound through HDMI, or even select it as an output, if I unplug my headphone speaker plug.  Apple's knowlege base says this is the case.  I am looking for a way to have both plugged in all the time, and have the sound mirrored to both.
         I use the speakers for itunes music, system sounds, skype, etc..  The HDMI sound is for steaming content to the TV.  I don't want to have to reach around behind the computer and unplug/plug each time I switch, for a multitude of reasons.  Any ideas out there?  Google wasn't getting me very far.  Maybe a terminal solution of some sort?  Thanks in advance.

    it seems that m1r3k found a very good workaround, at least for the Mid 2010 Mac mini models (that I'm using right now). I don't know if it works also with more recent Mac mini models.
    Re: After upgrading to lion, cant select HDMI sound setting
    Open Audio MIDI Setup.app in /Applications/Utility, click the + (plus) button in the bottom left corner of the window and choose "Create Multi-Output Device". In the new device settings tick the HDMI "Use" checkbox and you're done. Simply go to the usual System Preferences Audio panel and choose the newly created device, without the need to unplug the audio cable from the back of the Mac mini. You can also name the new audio device as you want.
    NOTE:
    This is only a workaround for a deliberate choice made by Apple on OS X Lion 10.7.2 and beyond:
    Mac mini: About HDMI audio and headphones
    Please let Apple know (here or here) how this has made things unnecessary awkward for users and needs to be fixed (these forums don't count, they are not read by Apple's employees)!

  • Pictures from facebook does not save to my photo album in my ipad mini, it allows me to click save but photos does not save in my photo folder

    How can i save a picture from facebook to an ipad mini photo folder, i am able to click save on the picture but it does not saves on the photo folder

    Go to settings>privacy>photos and turn on Facebook I had the same issue hope it works

  • HT204088 My CSR Racing (level) did not update from my macbook to my new iPad  mini?

    My CSR Racing "level" did not come over to my new ipad mini?

    from my Macbook Air

  • Kept and pressed the power button and home and still does not start what else I can get my ipad mini lights?

    help me please my ipad don´t tur on

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I can import video into iMovie but the sound does not come with it.

    I tried using a digitizer with my Macbook Pro that worked very well with my G5 tower for the past 6 years.....I can see the video but get no sound. Any issues anybody can think of? I have tried switching cables, etc. I am using a firewire connection running from a VCR. It also does the same thing with a PowerPC Macbook Pro.

    I had a feeling that was it and found the website....it said would not work with Snow Leopard or even Panther. Thanks though for taking the time to help.
    Jack

  • HT1551 i just hooked up apple tv and the sound does not come through the samsung sound bar but through the tv sound which is subpar

    i just hooked up appletv and the sound comes through the tv and not the samsung sound bar

    Hey there. Not sure if this'll fix your whole problem (ie, the bit about connecting your Yamaha amp and your optical connector) but I think I had the same problem with not getting sound out of the TV. And with a Sony TV about 5 years old too.
    The fix was to go to Settings, then Audio & Video, and then turn Dolby Digital to 'Off'.
    In theory you should always get sound out of the TV, but these early HDMI Sony TVs have a problem that cuts off Apple TV sound if it's being output to the Optical Dolby Digital port too.
    It's a bit of a pain but if you need the sound out of the TV just turn the Dolby Digital on the Apple TV to off, and when you do need it turn it to on - when you get your optical connection to your Yamaha amp going.
    Hope this helps!

  • Binding a JSF table to a list of data that does not come from a database

    Retrieving data from a database I can just use the jDev wizard to "Create EJB from table" and bind the EJB to a JSF table through a NamedQuery.
    However, in this instance I am retrieving a list of data from an existing API or a WebService.
    Does anyone have a good example of how best to do this?

    Hi There,
    I have make change as you suggested in your post.
    But I am getting error that "org.apache.jasper.el.JspPropertyNotFoundException - /presale.jspx(86,56) '#{saveData._nameList}' Property '_nameList' not found on type dbtransaction.SaveData"
    Where list is nameList which simply fetch data from Database and send it to the table
    Here is my jspx code.
    <tr:table var="row" value="#{saveData._nameList}">
                                  <tr:column>
                                       <f:facet name="header">
                                            <tr:outputText value="Name" />
                                       </f:facet>                              
                                  </tr:column>
                             </tr:table>
    I have just create one ArrayList object in Backing bean i.e. nameList and put getter setter functions for it.
    Please help me out for this issue.
    Thank You,
    Navnath

  • Poor 3g reception issue does not come from being in a low coverage area.

    For All of you who keep saying that "If youre in a low coverage area the 3g service wont work you must turn off 3g". That is not a solution. Yes it fixes the problem of not being able to talk on the phone but that is just a workaround that in my opinion is not acceptable. The name of the phone is iPhone 3g. The entire reason for buying this phone is the 3g network. If thats not there and frankly who cares about the GPS as its pretty much useless, then we could have kept our old phones. There are numerous reports of people using their old devices with 3g side by side and getting great reception on their other handset. In my opinion there is a problem with this phone and it should probably be returned until apple figures out what they did wrong. Its not the 3g network and its not a lack of coverage as other handsets are getting great reception. ITS THE PHONE!!!

    I removed all of the interface methods and set those properties and it still
    didn't work.
    I also have a custom skin on this class. I removed that and tabbing started
    to work again.
    Is there any good advise on how to prevent my skin from having effect on the
    group within the container? I've seen a good bit about focus and skins, but
    nothing about skins on a container? all the skin has is replacements for the
    header bar and the close button.
    Thanks!

  • Sound does not work from speakers

    I have Windows 7 on a HP 500B MT product desktop computer. According to my computer, my sound works fine. I installed the Microsoft Fixit and it said nothing wrong. I can plug in earphones and I can hear system sounds but no other sounds. The other speakers will sometimes either have too much static where I have to turn the volume down and the sound works OR I have absolutely no static and no sound. This is an intermittent problem. The volume is on max, device manager shows RealTek with no exclamation points by it and the driver is up to date. Then there are other days the sound works. What else could be wrong? Why is this an intermittent problem? I never turn my computer off. I always have updates installing. Any ideas anybody?
    This question was solved.
    View Solution.

    Did you try uninstalling the drivers from device manager? It could just be a driver issue.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

Maybe you are looking for

  • Private Credentials and how to get them back

    How to extract back the private credentials in a clean way from weblogic? We are currently working with bea weblogic version 7 and have developed an authentication module and a credential mapper module The authentication is fairly simple : the user t

  • Printing with Bleed and Crop marks from a PDF made with PS

    So, i have created a business card with a .125in bleed all around in photoshop. I know that you can go to File->print->output in photoshop and specify crop marks and the amound of bleed...however, i have saved my business card as a PDF from photoshop

  • Can't transfer iPhoto library to external drive

    Hi guys, Need some help here. My hard disk ran out of space and I am trying to transfer all of my photos in iphoto library into my external hard drive, which I have been using for my PC.  I tried dragging the library icon to my external drive icon, b

  • Hey all you pros, question for you...

    I am a new convert, and I and trying to learn all the ins and outs of mac worship. With the one-button mouse (i got myself a cute little wireless one here...), are there shortcut keys to do more with the mouse? I wasn't particularly fond of the might

  • Found dead multi-threaded server

    hi all My database is not running in multithread mode. mts_dispatchers = "(protocol=TCP)" I am getting such error found dead multi-threaded server 'S000', pid = (8, 4) Pl guide me suresh