TS2634 Suddenly no sound from headset on calls. Speaker does work when activated.

Why can't I hear incoming calls on headset, yet I can when on speaker. Was working just fine for the past year. Did I do something that needs to be undone?

Try disconnecting the headphones and then adjusting the volume, does it say headphones?
There might be something in the headphone jack, maybe lint, dirt, or something else in there.
Take a look at this Apple document for more information -> iPhone: Can't hear through the receiver or speakers

Similar Messages

When I make call I cannot hear the sound from the built in speaker. I need to switch on the loudspeaker or I have to plug in the headphone. What is the solution?

When I make call I cannot hear the sound from the built in speaker. I need to switch on the loudspeaker or I have to plug in the headphone. Due to this I cannot even use Siri, Voice message recorder or even Tom Cat applications. What is the solution?

http://support.apple.com/kb/TS1630

Cant hear sound from the long center speaker under the screen on pavilion dv6

can't heaar sound from the long center speaker under the screen on pavilion dv6

carlosherrera_1 wrote:
Look at p.12, items #2. I am talking about those speakers.
Hi,
Sorry I misunderstood, central (center) speaker is the one sit at the middle, we normally call Left, Right and Center speakers. Anyway, what is your speaker icon (bottom right corner) says ? Does it look like this ?
1. If NO, double click it & turn it ON
2. If YES, right click it, select "Playback devices" and turn it ON, it should look like this:
3. Otherwise, please post back
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I turn off the sound from the original midi or audio tracks when I turned on the duplicate tracks for editing ?

How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

Dan,
It sounds like one of your preferences has changed.
Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
Hope that helps

How to output sound from Zen Neeon to speaker without using

how to output sound from Zen Neeon to speaker directly?
as far as i know, i can only play content in my mp3 player using speaker with usb cable connected to pc
i just wonder how i play using "play" button in mp3 player and the sound will output to speaker directly?
need extra line-in cable?

my speaker system is subwoofer,but i not very sure it's 2. system.
the cable from the speaker is slightly too big to connect to the player headphone jack. and no sound come out after i play.
why?

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

Intermittent beeping sound from my PC internal speaker. How to disable it?

I have a HP Pavilion 1070d PC. I get an intermittent beeping sound from my PC internal speaker. It seems to engage when the hard drive starts working when it's been down for a while. How do I disable the beeping sound?

Domgoh, welcome to the forum.
Normally, the beeps that come from a computer are BIOS beep codes. They are warnings that something is wrong with the computer. At the bottom of the page in the link that I provided are codes for different motherboards. Review them to see if this is what you are receiving.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Only sound from my right internal speaker on my new hp stream X360 PC 11

hi, just opend my new HP Stream X360 PC 11 and it´s only sound from my right internal speaker. the system is updated and ive done the soundtest and the sound comes thru the right speaker even when i push the left speker test button.... softwere or back to the shop...

Were you able to contact Apple, about this issue, while under warranty?
If there is a hardware cause of the problem or other, they may fix it or
at least diagnose the underlying cause...
Your other post was changed into a new thread on its own, here:
•Popping sound from right MacBook Pro speaker
When posting in an old topic, your issue may not relate to the original
cause of the problem someone had a year ago with different hardware
and another build version of OS X.
Good luck & happy computing!

IPad 3rd Gen will not play sounds, but speaker does work

iPad 3rd Generation (A1416), ios 8.1.3
My iPad just recently stopped outputting sounds through the speaker, but the speaker does work. Notifications, alerts, music, videos, apps; nothing outputs sounds through the speakers. Sound DOES work through headphones and airplay devices. When researching other forum posts, my issue differs in a few ways.
1. The speaker DOES work. When I go into Settings > General > Sounds and move the slider bar at the top for Ringers and Alerts level it outputs sounds through the speaker.
2. When swiping up from the bottom of the screen to display the control center, there are NO controls shown for the volume of the speaker, which there should be.
I have gone through all the possible types of resets including a master reset and backup from iTunes and I am still having the same issue. At this point there are no more reset options or configuration changes that I am aware of to resolve.
Help Please!

Hi, urbsom.
Thank you for visiting Apple Support Communities.
I understand you are experiencing an issue with muted or no sound on various applications. I also understand that the issue persists after processing some troubleshooting steps. There are just a couple more that I could recommend in the article below.
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker
http://support.apple.com/en-us/HT203794
-Jason H.

On a Mac v10.6.6 Firefox v3.6.13 Right click on Google Map does not bring up the drop down box, with the first item being directions from here, the right click does work on Google map when using Safari

On a Mac v10.6.6 Firefox v3.6.13 Right click on Google Map does not bring up the drop down box, with the first item being "directions from here", the right click does work on Google map when using Safari

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

What to do when suddenly no sound from usb headset

I haven't use my linux in the past 3 days and when today I logged in I noticed I don't hear anything. I checked some other apps, but no good.
It works when I unplug my usb headset - I mean the built-in speakers do.
In pavucontrol I saw the lines moving so there is sound, I just can't hear it. I tried changing the device for output and the application currently in use, but nothing.
The only suspicious thing is that I have a 3rd device called "LADSPA Plugin Multiband EQ on Internal Audio Analog Stereo". I guess it's related to the pulseaudio-equalizer I installed about a week ago, but after doing that I had sound, I watched some movies and I had no problem at all.
Having no better idea, I removed pulseaudio-equalizer, restarted my notebook, but I still have that device.
I wanted to check the volume levels in alsamixer, but I don't have that, because it usually scr*ws up the volume levels, I only have installed what's said in the pulse wiki, but it's unrelated now, I guess.
My linux is fully up do date and I don't see anything unusual in my rc.conf.
What should I do? Where to look for the solution?

This problem is bizarre.
Basically - I have an audio interface connected via USB, then one day i get the message 'usb device disabled drawing to much power....'
So i tried a few different cables, and 1 cable worked fine.
Now all of a sudden, the problem is back - the cable that was working fine is now not working fine.
I've tried 8 USB leads, reset the SMC, reset PRAM, etc etc......
All the 8 USB leads i have work fine with other stuff, but as soon as i plug this audio interface in, it doesnt see it. The interface is fine because i've tried it in another computer.
I've lost a lot of faith in apple products over the last year or 2. It seems like theres always some sort of bug/problem. This will be the end of the line for me now. I just can't trust the quality or reliability of their products anymore.

Ipod plays when docked but no sound from headset or when not docked

My Ipod plays only when docked. No sound through headset or when not on docking station

Try the following to eliminate a software problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If still a problem that indicates a hardware problem with the iPod. An appointment at the genius Bar of an Apple store is in order.

All of a sudden loud sound from the right

All of a sudden my macBook Pro is making a loud sound from the right which I think is the fan? It happens when I first turn it on so it is not too hot.
I'm concerned because my last ibook g4 had a dead hard drive in less than a year..this sound is somewhat similar to the clicking hard drive, but forgive my ignorance the hard drive is not on the right?
Is this a normal new sound? Does feel that way.
cursed with macs.

MissWit,
Its the fan, you got two one in each side.
I have same problem, but mine often appears when the MBP is warm or let me say been running for a while, at the same time I feel vibrations when I touch the casing or maybe housing is a better word, well the aluminium cover...
I am 99.9% sure the hard drive is located to the left.

Suddenly no sound from speakers and only from headphones

Hello,
I have a HP 8440p VQ664ET#ABU Elitebook laptop running Windows7 64bit pro.
Since today I'm experiencing the following problem:
1) no sound is heard through speakers when headphones are disconnected.
2) If I connect the headphones, the sounds are heard correctly through them: this is the expected behavior
I don't think it's a speakers hardware problem because I can make the speakers play sounds for one or two seconds like this: while a sound is being played, such as music file for instance, if I move up and down the headset volume cursor (regardless if headphones are connected or not) I can hear the played sound through the laptop speakers for a few seconds, after which the speakers mute again.
So to summarize:
1) Headphones disconnected: no sound from speakers
2) Headphones connected: sound from headphones
I rebooted, suspended and restored without any luck so far.
I'm under the impression that there might be a problem with the headphone jack: it is like the laptop always thinks that the headphones are connected and therefore cuts the output to the speakers.
Any clues?
Thanks
Sergio

Try installing the sound drivers from the following weblink:
http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59649.exe
If the issue persists, try the troubleshooting steps mentioned in the following weblink:
HP Notebook PCs - No Sound from Speakers (Windows 8)
Offers tested solutions that begin by identifying the exact issue, and then adjusting the settings that will resolve the majority of sound problems on a notebook running Windows 8.
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Suddenly No sound from speakers - only from headphones

I suddenly have no sound from my speakers, and I can only use headhpones. Pavilion dm4-1173cl

Hi,
Please try this first to enable Speakers in Playback devices as follows:
1. Right click speaker icon (right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it and set as Default
5. Click Apply/Ok
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

TS2634 Suddenly no sound from headset on calls. Speaker does work when activated.

Similar Messages

Maybe you are looking for