TS2634 why am I experiencing so many fails on my Message system?

Why am I experiencing so many fails on my message system?

You need to provide more info. Describe "fails". Are you getting any error messages?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

Similar Messages

I ran an iTunes update. It failed with the message System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem. I tried reinstalling but get the same message.

I ran an iTunes update. It failed with the message "System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem." I tried reinstalling but get the same message. I looked in my Recycle Bin for that file name but there is none there. Is this a new file that iTunes wants?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683)

Why am I experiencing Media Encoder Fail?

Hi,
I've been using ME and am suddenly experiencing encoding issues. Where I was once getting compressed/enoded MOV files, now I'm just getting 24 kb empty files. Does anyone have experience with this? Any insights would be greatly appreciated. Thank You !
Johnny

Most likely because your system is infected with malware.

Password logon no longer possible---too many failed attempts

Dear All,
I Have a problem with one user-id , with out entering the wrong password it automatically locked
4 to 5 times it is locking daily , no one not entering any wrong password,
why it's locking ? it shows this message : *password logon no longer possible---too many failed attempts*
what could be the reasion, please suggest me , if any one has answer for this give me the proper solution as
early as possible.
Thanking you ,
Thanks & Regards,
Narasimha.

Hi everybody,
I have created a new client using SCC4.
I have logged into that client and had done LOCAL CLIENT COPY with sap_usr profile
and scheduled it as a background job.
the job was also successfully completed.
but one day later when i tried to login into that particular client it is throwing the error:
'password logon is no longer possible - too many failed attempts'.
why it is happening, plz someone help me in this regard.
Thank you very much in advance, do the needful.
regars
SWAPPY

Why do I get a "Transcode Failed" message?

Dear friends on the forum;
I have created a complex project in Encore with several levels. It starts off with an opening menu whose choices are two video files and a link to a sub-menu. This sub-menu then offers links to several sub-sub menus which, in turn, offer links to a number of video files each. We are talking a total of 25 movies in all; some short (a minute and a half) some long (90minutes). The Encore file is on my computer's hard drive and the relevant video files are on an external hard drive, accessed by USB cable. I have created other DVDs in the past using this arrangement with no trouble. Why am I having problems now? Is it because of the complexity of this project? The total size of these files is about 3 1/2 gb--not too big for the DVD. I checked the project before clicking "Build" and no problems surfaced. I am running a Hewlett-Packard HPE-470f computer with a 64-bit Windows 7 o/s. I have an AMD processor with 3.2 ghz and 8gb of RAM.
Can anyone help me with this? Many thanks!
Regards, Lewis

That gives me lots of grist for my mill, John. Thanks!
Date: Wed, 15 Dec 2010 11:09:15 -0700
From: [email protected]
To: [email protected]
Subject: Why do I get a "Transcode Failed" message?
I skipped from CS3 (Pentium 4 CPU with 2Gig system ram and 2 hard drives... very slow, but it worked OK for AVI files and overnight Encore encoding) to a new computer for CS5 - read http://forums.adobe.com/thread/652694?tstart=0
Since upgrading to CS5 from CS5 may mean a new computer, I can't really advise you on that
The Windows swap or paging file is where Windows puts things that it needs quick access to... sorta like you put your wallet in your pocket instead of in your dresser drawer, so you have it handy to pay at the grocery store
The idea is to "spread the load" so no one hard drive is working too hard and becomes bogged down
Video editing, like "high end" gaming, requires a LOT of computing power
My previous computer worked for CS3 and AVI... I had to build a new computer for CS5 and AVCHD files
You should (in my opinion) add a 2nd internal 7200rpm hard drive (never a "green" drive... too slow for video editing) and keep your boot drive for only Windows and software... this is the minimum (again, my opinion... but go read in the hardware sub-forum)
Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
- click the embedded picture in Harm's message to enlarge to reading size
- you need AT LEAST 2 drives for video editing, 3 is better
- some HD formats work better with (require) RAID
Read Hunt on Partitions http://forums.adobe.com/thread/650708?tstart=0
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
And even more hardware discussion http://forums.adobe.com/community/premiere/hardware_forum
>

Password logon no longer possible - too many faile d attempts

hi expert ,
in my support project   PROCESS CHAIN IS GETTING TERMINATED IN SEC AFTER SCHEDULING TIME ..ITS NOT TRIGGERING INFO PACK TOO     "Internal session terminated with a runtime error (see ST22)     ".                                                       .AND IN ST22 IT SHOWS ABAP SHORT DUMP ERROR WITH MSG:         "Password logon no longer possible - too many faile d attempts "
.BEFORE MY COLLEAGUE WERE REPEATING PROCESS CHAIN AT INFOPACKAGE LEVEL .SOME TIMES IT ENDED SUCCESSFULLY
FOR TODAY WE REPEATED THE PROCESS CHAIN AGAIN . NOW IT ENDED SUCCESSFULLY.CAN ANY ONE SUGGEST ME WHY IT IS HAPPENING AND HOW TO FIX IT PERMANENTLY
Error analysis
|    Short text of error message:
|    Password logon no longer possible - too many faile d attempts
|
|    Long text of error message:
|
|    Technical information about the message:
|    Message class....... "RSAR"
|    Number.............. 051
|    Variable 1.......... "Password logon no longer possible - too many faile"
|    Variable 2.......... "d attempts"
|    Variable 3.......... " "
|    Variable 4.......... " "
thanks in advance
Regards ,
Harry

thanks for your valuable suggestion murali ...
can you please tell bwremote user ... like where we maintain these user id and passowrd ... how does this effecting process chain ?? if we are changing this password mean where and all we need to change so that my process chains wont get same problem ....
thanks in advance
HARRY

HT4623 why am i experiencing short battey life after installing ios 7?

why am i experiencing short battey life with my IPad after installing ios 7 1 ?

Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
Poor battery life after installing iOS 7.1? Try these simple tips
http://www.zdnet.com/poor-battery-life-after-installing-ios-7-1-try-these-simple -tips-7000027348/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Trying to Burn MP3 CD - Why Does it Require So Many CDs?

I imported a bunch of my daughter's CDs as MP3 files. When I was done, I created a playlist in iTunes and moved all the MP3 files into it. iTunes tells me that I have 304 songs in the playlist, taking up 696.8 Mb. I then tried to burn the entire playlist to CD, but in the course of the burn iTunes told me that the burn would span CDs. After inserting my 4th CD, I stopped the process.
I might be able to understand why this would take 2 CDs (even though I used a 700Mb CD), but why did it require so many more? More importantly, how do I set up iTunes so I can import around 600 Mb of MP3 songs onto only one CD? This would seem to me to be a pretty common process, but iTunes is giving me fits!
Any help here would be greatly appreciated.
TIA!
Scott

I have read many threads about similar situations and the only thing I can suggest is buy "music pro cd-r's". My friend and I had the same problem and that solved it, hope it does for you too.
24" imac intel core duo Mac OS X (10.4.8)

Why does my adobe creative cloud fail to update reflow cc 2014?

Why does my adobe creative cloud fail to update reflow cc 2014? it says:
Creative Cloud desktop failed to update.(Error code: 50) Contact Customer Support after 43% installed

Error 50 https://forums.adobe.com/thread/1432237 may help
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Why won't Photoshop CS6 Extended update? I keep getting a failed to update message.

Why won't Photoshop CS6 Extended update? I keep getting a failed to update message.

Run the Creative Suite Cleaner Tool, reinstall the program, try again.
Mylenium

Too many failed message tracking resquests via task in Exchange 2010 SP3

Hi,
We are getting this alert every day and I don't find anything to solve it...
Some days it's Yellow (3%) and the others it's Red (5%)... But we don't have 5% of the messages failed.
Do there is a solution to this problem or even somewhere to look ?

To Fix your issue, try to override monitor rule of KHI: Too many failed message tracking requests via task – Red (>5%) and also rule of KHI: Too many failed message tracking requests via task – Yellow (>3%)
Also you can refer below link
http://social.technet.microsoft.com/Forums/en-US/089b0c7c-77c5-47ef-9e48-7e44a8f1d2a1/khi-too-many-failed-message-tracking-requests-via-task-in-exchange-2010-sp1-management-pack?forum=operationsmanagermgmtpacks
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Does the iPhone 4 disable for 24 hours after too many failed attempts at entering the passcode

Does the iPhone 4 disable for 24 hours after too many failed attempts at entering the passcode

Oh thank you. Only thing is I have no backup, so i'd prefer to wait if there is a 24 hour lock out... Someone told me they thought there was, and I can't find anything on google to tell me how many attempts you get and how long you get locked out for each time. A friend made me a new passcode when under the influence and now after thinking about it remembers what he changed it to

Why do ipods come in many awesome colors and iphones only come in black and white?

Why do ipods come in many awesome colors and iphones only come in black and white?

The only answer is because that's what Apple decided. No one here knows any more than that.
You should put a case on it anyway so buy one in the color you want.

Smq2 - Password logon no longer possible - too many failed attampts

Experts,
I was working on a data initial load from ECC to CRM. But the status remains "Running".
And in smq2 I saw the queue with "SYSFAIL" with info "Password logon no longer possible - too many failed attampts".
But my user's not locked in either CRM or ECC.
Any suggestions?
Thanks a lot
Shane

Hi Shane,
Whenever there is data transfer between R/3 and CRM it happens via a DIALOG user.
Henceforth, We have to maintain the dialog user in both the CRM and the R/3 systems.
To check whether the user is a dialog user , goto the Tx. SU01 and type in the User maintained in the SM59 Tx for the Data Transfer.
Check the User Type - It has to be Dialog User, else change the user to Dialog User.
Secondly, the User sepcified for the Destination in the CRM system has to exist in R/3 system also and vice-versa.
Henceforth, check the existance of the user in the respective system.
For Example. In Tx :SM59 ,for the R/3 destination QWC505, If the Dialog user specified was TESTER1. Then login to R/3, goto Tx: su01 and check the user exists in R/3.
Thirdly, In Tx:SM59, After sepcifying the LOGON details for the respective destination,Check the following :
1. Click on the REMOTE LOGON Button
2. click on the CONNECTION Test Button.
3. Click on the UNICODE Test Button.
If all the above criteria's are met, Then there should not be any problem WRT to "Password logon no longer possible error in the queues."
i faced the same problem some time back, I was to able to troubleshoot the problem with the above information. Hope You will also be able to fix the probelm.
Best Regards,
Vignesh Ravikumar

Why am I experiencing long lag times after installing Mavericks?

I just upgraded from Snow Leopard to Mavericks on my Mac Mini; Why am I experiencing long lag times?

Not enough free disk space can cause the lag times...
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage. Make sure there's at least 15% free disk space.
Do you have anti virus software, MacKeeper, and CleanMyMac installed?
Checked the disk lately?
Launch Disk Utility located in HD > Applications > Utillities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If DU reports errors, restart your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities in OS X Recovery to repair the startup disk.
Make sure to back up all important files first before using OS X Recovery.

TS2634 why am I experiencing so many fails on my Message system?

Similar Messages

Maybe you are looking for