TS2690 Path mentioned in instructions is not consistent with my up-do-date iTunes.

Instructions say to "From the Edit menu, choose Preferences" but the path to Preferences is through the File menu in my version of iTunes. That's not a big deal, but it also says to "Click the Reset Sync History button". I only see "Delete Backup..." Is Deleting Backup the same thing?

No, your backup should remain intact. If you're concerned, you can always back up your backup. Your backup is located at one of the following locations:
- Mac OS X: ~/Library/Application Support/MobileSync/Backup
- Windows XP: %AppData%\Apple Computer\MobileSync\Backup
- Windows Vista: %AppData%\Roaming\Apple Computer\MobileSync\Backup
- Windows 7: %AppData%\Roaming\Apple Computer\MobileSync\Backup
You can go to the backup folder and copy any backup(s) to your desktop for safekeeping.

Similar Messages

IPad available memory NOT consistent with available memory shown in iTunes and available memory reduced after a connected sync...doesn't make sense.

I was looking through my pictures on iPhoto on my iPad 2 and noticed in some of my albums there were duplicate pictures, but on iPhoto on my iMac there wasn't. I had also noticed that my 64GB iPad 2 had only a little over 14GB left for available memory. I decided to connect my iPad2 to my iMac and sync it with itunes but this time I unchecked Sync Photos. I was asked to remove photos which I agreed to. My intnet was to re-install my photos in hopes that I would no longer see the duplicate photos and quite possibly free up some memory. In short, none of that worked and instead the pictures remained on my iPad2 and my available memory jumped to 956MB. I then tried selecting a " Selected Events, Faces, Albums..." in the Photo section of iTunes but I did not select any albums or events or faces. The sync ended and I still had all of the pictures on my iPad2 with 7GB left of available memory showing on my iPad2 but now showing 12GB on my iTunes on the iMac.
I then tried to do a sync again, syncing all photos and the sync cancelled. I tried it again and it went through. This sync ended with 14GB of available memory showing on iTunes on my iMac, BUT on my iPad2 it showed 7.1GB.
None of this makes any sense. I guess I could have left it alone and viewed duplicate photos but if duplicate photos were causing available memory to be reduced, I wanted the memory to come back up for future use.
Also, I noticed that the amount of photos being synced has randomly changed on a couple of these occassions as if I had more or less photos to sync and I haven't. I'm not sure what would cause this either.
Where it says "Other" in the memory bar in ITunes on my iMac is 26.34 GB. Before I did the first sync it was a little over 7GB. What would cause the "Other" to consume so much memory? and what is "Other" Why did it fluctuate so drastically when I've made no changes to my iPad?
I hope I can get some help to this.
Thanks!

Brock_DB wrote:
Where it says "Other" in the memory bar in ITunes on my iMac is 26.34 GB. Before I did the first sync it was a little over 7GB. What would cause the "Other" to consume so much memory? and what is "Other" Why did it fluctuate so drastically when I've made no changes to my iPad?
"Other" can be the cause of this storage capacity snafu that you have going on with your iPad. "Other" is pretty much what it sounds like it should be with regard to what is stored on your iPad. It is "stuff" associated with apps but not the apps themselves or any other media. It consists of Safari Bookmarks and history, Notes, text messages, email messages, contacts, photos associated with contacts and items of that nature. It should not be anywhere near 26 GB and the fact that you have much is a little bit of a problem.
Sometimes the only way to rid your device of that bloated "other" is by restoring as a new device without using the backup. There could be something corrupt on your iPad and if you restore from a corrupted backup, you will just end up back where you started. Also, sometimes this issue is caused by syncing photos and while I don't know this for a fact, it might have something to do with the metadata associated with the photos that gets corrupted and then that might cause this "other" storage problem.
Take a look at some of these and see if something in one of them helps.
https://www.google.com/search?q=What%20is%20%22Other%22%20on%20my%20iPad%20and%2 0how%20do%20I%20get%20rid%20of%20it?#q=What%20is%20%22Other%22%20on%20my%20iPad% 20and%20how%20do%20I%20get%20rid%20of%20it%3F

After REFRESH the cached object is not consistent with the database table

After REFRESH, the cached object is not consistent with the database table. Why?
I created a JDBC connection with the Oracle database (HR schema) using JDeveloper(10.1.3) and then I created an offline database (HR schema)
in JDeveloper from the existing database tables (HR schema). Then I made some updates to the JOBS database table using SQL*Plus.
Then I returned to the JDeveloper tool and refreshed the HR connection. But I found no any changes made to the offline database table JOBS in
JDeveloper.
How to make the JDeveloper's offline tables to be synchronized with the underling database tables?

qkc,
Once you create an offline table, it's just a copy of a table definition as of the point in time you brought it in from the database. Refreshing the connection, as you describe it, just refreshes the database browser, and not any offline objects. If you want to syncrhnonize the offline table, right-click the offline table and choose "Generate or Reconcile Objects" to reconcile the object to the database. I just tried this in 10.1.3.3 (not the latest 10.1.3, I know), and it works properly.
John

G/L Account currency is not consistent with G/L Interim Account currency

Hello
A few days ago I was printing checks and suddenly an error occurs
it says something like..."Another user is accessing the same account"
In the reserch I found help in SAP Portal, where I showed how to unlock this part
This I did in Administration->Set up-> Banking-> House Bank accounts
At the end is a column that says BLOCK PRINTING, always locked, but when the error occurs is enabled for the account that has been affected, and a super user must unlock by unchecking the check box.
The problem is that the update that part I get an error message and I have not been able to unlock
The error is
G/L Account currency is not consistent with G/L Interim Account currency [Message 60701-9]
In this regard I have not found anything to help me resolve this error and the printing of checks is blocked
I need your help
Regards.
Yen

Hi
i found the problem, we have an accunt that is just visible in House bank accunt window when try to select an account in the column G/L intermin account, but that account is not an active account , the descrpction says "Copy express transport account" i delete it in all the rowa and finaly we could update the window.
Regards
Yen

Balance of S_ALR_87012168 and S_ALR_87012167 is not consistent with FBL5N

Dear all,
Could you kindly let me what's the reason that cause S_ALR_87012168 and S_ALR_87012167 is not consistent with FBL5N.
When view line item anlaysis the line item is the same with FBL5N, but in the first page of due / not due anlysi, the result is not the same?
Thanks bnd Best Regards.
CSY.

Hello
first thing you should do it is to run the programm SAPF190 if you don't activate NewLedger or TFC_COMPARE_VZ if new ledger is on.
These programms will check the index of the data and compare the amount between index and BSEG/FAGLFLEXA table.
Second point, do you check the analysis with all same option ?
Best regards
Philippe

"IP and router address not consistent with subnet mask"

Hi all,
i have one of the old Powermac G5's running os x 10.3.5 "Panther" with a dual 2.5ghz processor, 512mb or ram, 160 gig hd, and no wireless card. I've been trying to hook the computer up to my network via an Ethernet cable (I have a Linksys WRT54G series router).
the problem is this: When I go through the Network utilities using the "assist me" option, select the LAN option, put in the necessary information (IP address, subnet mask, router address, and the dns host), and select continue, this message pops up:"IP and router address not consistent with subnet mask".
What I've found is that no matter if the computer is plugged in with a cable to the Ethernet port the message comes up which is very unusual.
Thanks in advance.

Have you verified that you indeed have the proper subnet entered?
Why don't you just let the Mac obtain its ip address from the router via DHCP?

APIC calibration not consistent with PM-Timer

Hi ArchUsers!!!
I'm doing some diagnostic to my laptop to make it work well and 'cause I like to solve/correct bad things.
Let's start from this error
# journalctl -b
APIC calibration not consistent with PM-Timer: 119ms instead of 100ms
# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) per core: 1
Core(s) per socket: 2
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 15
Model name: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz
Stepping: 13
CPU MHz: 800.000
CPU max MHz: 2000,0000
CPU min MHz: 800,0000
BogoMIPS: 3991.35
L1d cache: 32K
L1i cache: 32K
L2 cache: 2048K
NUMA node0 CPU(s): 0,1
Tell me if you need some other infos about the laptop!
Last edited by addamm (2014-01-03 11:42:49)

Hi ArchUsers!!!
I'm doing some diagnostic to my laptop to make it work well and 'cause I like to solve/correct bad things.
Let's start from this error
# journalctl -b
APIC calibration not consistent with PM-Timer: 119ms instead of 100ms
# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) per core: 1
Core(s) per socket: 2
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 15
Model name: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz
Stepping: 13
CPU MHz: 800.000
CPU max MHz: 2000,0000
CPU min MHz: 800,0000
BogoMIPS: 3991.35
L1d cache: 32K
L1i cache: 32K
L2 cache: 2048K
NUMA node0 CPU(s): 0,1
Tell me if you need some other infos about the laptop!
Last edited by addamm (2014-01-03 11:42:49)

Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue?

Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue and if i must, how dI reintall iTunes without loosing my content?
P.S. I am able to sync postcasts and music though!

http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125
http://support.microsoft.com/kb/299357

I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon. Could this be because I have an old iphone and it's not compatible with the latest version of itunes?

I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon. Could this be because I have an old iphone and it's not compatible with the latest version of itunes?

Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

Hey guys, This is the problem. My father just got an iPhone 5. He has a Macbook Pro 2009 with OS X 10.5.8. The iPhone is not compatible with this version since the iTunes is an older version as well. At our local Apple store in my home country, they told

Hey guys,
This is the problem. My father just got an iPhone 5. He has a Macbook Pro 2009 with OS X 10.5.8. The iPhone is not compatible with this version since the iTunes is an older version as well. At our local Apple store in my home country, they told him he needs to upgrade (which I agree of) but that the memory of this computer is not enough to hold the newer OS.
Please help, he does not really agree with buying a new computer just because of the versions.
Thank you, I appreciate your help.

This is what I have. Thank you so much rdr4lfe.

My iphone can't back up to pc,because a session could not started with iphone.how fix the itunes

my iphone can't back up to pc,because a session could not started with iphone.how fix the itunes or iphone,this problem is after update ios7.0.4 and update itunes.pls teach me fix my pc,my pc is windows vista....

i have this problem too >> but i try other iphone ios7.0.3 i ok and work
but my ios7.0.4 cant back up and keep pop out session could not started with iphone !
really hope someone can help it ..
thank a lot !

My ipod touch calendar is not syncing with outlook 2007 after updating itunes

My ipod touch 4g, ios6.1 is not syncing with outlook 2007 since updating itunes last month.Also my calendar entries i added before one
month are missing in my ipod touch.Those entries are automatically deleted from my outlook and i found those entries in the deleted data
folder in my outlook. Even new entries i added in my ipod touch later are also not syncing with outlook.

See:
iTunes 11 for Windows: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
or
iTunes 11 for Mac: Sync contacts, calendars, and other info with iPod, iPhone, or iPad

Colors not consistent with Snow Leopard 10.6 on an Eizo SX2761W monitor

I am unable to get any color consistency with Snow Leopard 10.6 on my Eizo SX2761W display.
Most of the actual "content" (i.e. images, videos, websites, etc.) is displayed very saturated and dark, much more saturated and dark than in 10.5.8. I presume that's because of Snow Leopard's new gamma value. The problem is, all of OS X's GUI elements, like the dock, icons and color labels in the finder, title bar buttons, etc. are not displayed in the same manner. These elements are all very desaturated, pale and grayish. NoMachine NX sessions running in X11 (via Rosetta) also have this desaturated look in Snow Leopard.
Here's a screenshot comparison I put together, that shows those color inconsistencies using the example of Mozilla's Firefox logo on the web in Safari, on the web in an NX session and as an icon in the Finder and in the Dock:
http://dl.getdropbox.com/u/7276/SnowLeopard-ColorsAndContrast.png (1 MB)
As far as I could test it, I get these color/contrast discrepancies only on the Eizo SX2761W monitor. I checked this on a classic Mac Pro and a late Mac mini with the same results. On a MacBook and its internal display Snow Leopard's colors seem consistent.
I tried to recalibrate the SX2761W profile, I tried out all the other standard color profiles available in Snow Leopard, I tried to copy my old profiles over from a Leopard backup, but I was unable to get rid of the display inconsistencies. After a whole day of trying and tinkering I went back to 10.5.8 to get a consistent color environment back.
Any ideas what's causing this and more importantly what to do about it? I have to say I'm at my wits end. The only thing I can think of is mailing this issue to Apple in the hope there will be a point release in the not too distant future that fixes the problem.

I have what I assume is the same problem. It just started today on my DELL WFP2407 - but remains even when switching to my MacBook Pro's built in screen.
The Dock, Safari, the desktop background - and probably other colour managed applications; all show very pale blue hues with over saturated red. Blue goes towards purple and other colours get muddled and pale. Oddly the Finder displays colours correctly on icons, but not the dock. I took a screenshot of Finder's Safari icon next to The Dock's:
http://www.nuxx.dk/hosting/paledock.png
- Clearly showing significant inconsistency... I just updated to 10.6.1 which didn't change anything.
Needless to say I tried calibrating a new colour profile to no effect, and seeing as the finder itself renders things just fine I'm not sure that's where the issue lies.
This is a huge problem for me, I hope there is a simple solution.
Message was edited by: nuxxie

The rendered records are not consistent with the range

After changing the range with record navigator to render the records,
if navigate to other page and go back,the rendered records will not be
consistent with the record range.
The issue can be reproduced as follows.
1.when select 1-10 range,the first 10 records are rendered.
2.select [Next 10 records] to render the 11-13 records.
3.change to other page and return to the original page.
It is found that the 11-13 records are rendered but the range is 1-10.
You can verify the issue by executing SampleMainPG.xml of the Tutorial.jpr for 11.5.10.2
from Jdeveloper after changing the SampleMainCO.java as below.
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
if (pageContext.getTransactionValue("link") != null)
OAAdvancedTableBean inner = (OAAdvancedTableBean)webBean.findChildRecursive("InnerTable");
inner.clearCache(pageContext);
inner.setAttributeValue("CLEAR_CACHE_ONCE_NOEXECUTE_ATTR", Boolean.TRUE);
<==comment out these original source above.
OAAdvancedTableBean outer = (OAAdvancedTableBean)webBean.findChildRecursive("OuterTable");
outer.queryData(pageContext, false);
<==add the two rows of source above to get the latest query data.
you should to make the records of the table fwk_tbx_employees to be more than 10 just using the SQL script below.
(just need to change EMPLOYEE_ID at your will)
INSERT INTO fwk_tbx_employees (
EMPLOYEE_ID,
TITLE,
FIRST_NAME,
MIDDLE_NAMES,
LAST_NAME,
FULL_NAME,
EMAIL_ADDRESS,
MANAGER_ID,
POSITION_CODE,
SALARY,
START_DATE,
END_DATE,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_LOGIN,
ATTRIBUTE_CATEGORY,
ATTRIBUTE1,
ATTRIBUTE2,
ATTRIBUTE3,
ATTRIBUTE4,
ATTRIBUTE5,
ATTRIBUTE6,
ATTRIBUTE7,
ATTRIBUTE8,
ATTRIBUTE9,
ATTRIBUTE10,
ATTRIBUTE11,
ATTRIBUTE12,
ATTRIBUTE13,
ATTRIBUTE14,
ATTRIBUTE15 )
VALUES (
17,
'ichiro',
'yamada',
'ichiro yamada',
1,
0,
sysdate,
sysdate,
sysdate,
0,
sysdate,
0,
0,
it seems that if use the functions below,the issue can be workarounded.
But it is not clear whether there is any other impact from these functions.
innerTable1.clearCache(pageContext);
innerTable1.setAttributeValue("CLEAR_CACHE_ONCE_NOEXECUTE_ATTR", Boolean.TRUE);
Could you please share your idea?
Thank you very much in advance.
Best regards,
Wang

FYI. I was able to do what I wanted by first going to page properties and removing unwanted fonts from appearance. Then edit the page, select all, change style to normal, then select the text where you want to use a different style and change style there. This gives consistent appearance with both browsers.

XML Publisher rtf output not consistent with the rtf created

I am using XML publisher to generate a custom report.
The approach I folllowed:
1) AM Class: Write the VO data to XMLNode using vo.writeXML() method
2) XML Publisher Administrator Responsibility: Create a data template and attach the xml created in step1 as "Preview Data"
3) XML Publisher Administrator Responsibility: Create a rtf template (contains images and text), attach the data template (step 2) and attach the rtf created.
4) Controller class: Use TemplateHelper.processTemplate() method, passing the rtf template and the XML data from VO.
5) Verify the rtf output in application.
Issues I am having are as follows:
1) Major issue is page format. I have saved my rtf file with a different page format as below:
     File->Page Setup->Paper->Width:255 pt
               ->Height:165 pt
     File->Page Setup->Margins->Top: 12 pt
                    ->Bottom: 0.1 pt
                    ->Left: 0.1 pt
                    ->Right: 12 pt
When I open my document from the application, the margins and page setup rtf output is not retained (as given in teh doc), hence my whole layout is disturbed.
Thus, I am getting a very weird layout when I open my rtf output from application.
How can I retain the page settings?
2) I added a image, and the size of the image also is not retained as well.
And if I set the layout wrapping style anything other than "In line with text", the image does not show up in the output.
Would greatly appreciate if someone can put some light on this.

RTF & PDF output can't be exact same, we can minimize the difference by eliminating all extra spaces(Ex: from table rows, in between form fields etc.) from RTF while generating RTF output.
For reference:
BUG:8662322 - RTF FORMAT DOES NOT SHOWS WITH FIXED HEIGHT OF ROW
Thanks,
Sandeep

TS2690 Path mentioned in instructions is not consistent with my up-do-date iTunes.

Similar Messages

Maybe you are looking for