TS2709 I have AppleTV and Ipad2 running VJay app to my TV over a private cisco router disabled firewall but I keep loosing the video on my TV after a few minutes what can I do?
I have AppleTV and Ipad2 running VJay app to my TV over a private cisco router disabled firewall but I keep loosing the video on my TV after a few minutes what can I do?
I also get this problem on my iPad, so probably not related to the AppleTV. On the iPad I restarted Airport Extreme this time, and then the iPad saw my Home Sharing.
So to recap, restarting the router or Airport Express allowed the iPad and AppleTV to see Home Sharing. Restarting AppleTV also allows AppleTV to see Home Sharing.
So does anyone have any idea?
Thanks
Similar Messages
-
When I''m playing a video clip the computer "locks-up" after a few seconds - what can I do to fix it please?
The latest is happening with the 12 little video clips sent to me by Apple entitled "Get to know your new iPad"
They run from 3 to 32 seconds and then "lock-up" on my iMac.
I don't have photobooth on my iMac
The link to the Apple promotion is :-
http://www.apple.com/ca/ipad/guided-tours/?cid=CDM-CA-DM-P0009300-160603-EN&cp=e m-P0009300-160603&sr=em
D -
My ipod touch 4g heats up in a few minutes what can I do thanks
my ipod touch 4g heats up in a few minutes what can I do thanks
Wit heavy use like gaming the iPod can get quite warm.
Are you getting a over-temperature warming message?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have over 2000 tunes in my ITunes library but I cannot use most of them because their "Original files" cannot be found. What can I do to correct this ?
This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes.
tt2 -
Each time I try to burn a cd from a playlist, I keep getting the message 'disc burner or software not found' I haven't changed anything recently. Why has this suddenly started happening?
It's c. 14 months old and sometimes it gets hot...
-
Sql Server 2008 R2 keeps disconnecting after a few minutes -- how can I prevent this?
I already went into the Sql Server Configuration manager and set the TCPIP Keep Alive value to 0 (default setting 30000). But still, after like 5 minutes it disconnects, and I have to re-log back in. The problem with this is that I will usually have several
#temp tables open -- then I have to re-create/populate all these #temp tables. I'm running win7 SP1, Sql Server 2008 R2 Developer -- SP2. Is there something I can set in the registry maybe? What can I do to prevent sql server 2008 R2 Developer from disconnecting?
Rich PI wish to continue with thanks to all for replies. The disconnect property after Query execution is not checked. And I am not sure about not letting my computer sleep. Sometimes I have to leave
it for extended periods.
Good day Rich
P123,
Sometimes for monitoring we have to do actions that are one-time in order to check our assumptions. In this case I recommend that you do this check :-)
you just need to check it once (like 24 hours), to make sure that this is the the source of the issue, or not :-)
In any case you can use screensaver, but make sure that you do not close disks as well.
Please inform us your result
Ronen Ariely
[Personal Site] [Blog] [Facebook] -
My iPad 2 has quit sleeping automatically after a few ministers of non use, how can I reserve this feature?
Settings-general-autolock
-
My Ipod Nano 6th generation is no longer recognized by iTunes & my computer. I did all troubleshooting steps. After checking for changes and reinstalling legacy software in device manager I keep getting an error 10 message (device can't start). My device is charging when I plug it in and is otherwise still functioning normally. Can anyone help me please?
Universal Serial Bus controllers
Intel(R) ICH9 Family USB Universal Host Controller - 2934
Intel(R) ICH9 Family USB Universal Host Controller - 2935
Intel(R) ICH9 Family USB Universal Host Controller - 2936
Intel(R) ICH9 Family USB Universal Host Controller - 2937
Intel(R) ICH9 Family USB Universal Host Controller - 2938
Intel(R) ICH9 Family USB Universal Host Controller - 2939
Intel(R) ICH9 Family USB Universal Host Controller - 293A
Intel(R) ICH9 Family USB Universal Host Controller - 293C
USB Composite Device
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer. -
?
the security code is 3 numbers...... so caps shoudnt affect it and i did try it with and without caps on
-
Any help appreciated. ITunes always crashes (stops working and I get the message to close it) after a few minutes of playing tunes.
Hello there, TMacID14.
The following Knowledge Base article offers up some great pointers tor troubleshooting playback issues in iTunes:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/ts1362
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I Am having problems with the radio on the Apple TV cutting out after a few minutes. This has started to happen after software update to Ios8. Has anyone else had this problem and are Apple looking into fixing it?
I am having the same problem also Thought it was my network and reset everything including Apple TV but still the problem is there . I assume now it is down to iOS 8 prior to that was perfect
-
My new iPad air is asking for a pass code. I have only just finished restoring it via iTunes from my ipad2 and I didn't set one. The one I used before doesn't work. What can I do?
http://support.apple.com/kb/HT1212
-
I have upgraded my MAC OS to 10.6.8.
Final Cut Pro 5.0 still runs great, but Soundtrack Pro 1.01 opens, but operates at a glacial pace. It does not functionally operate.
What can be done to remedy this?Depending on the configuration of the computer hardware and software
you may need to consider upgrade the RAM by installing more capacity.
Also, in the same vane, choose to consider upgrade the hard drive to
one of faster transfer, such as SSD, hybrid, or fusion; if not already at
least 7200-RPM and not too full of saved content.
Since no information is given about the model build configuration of Mac
there may be other suggestions to make it work better. Usually an OS X
upgrade requires one to look at the hardware resources available to it.
The OS X works best with more memory: new higher capacity chips.
This may be possible, and they should be high quality from reputable
vender who has tested them on Apple in OS X, such as OWC or Crucial.
Good luck & happy computing! -
I have a new MacBook Pro, and when I try to print, the laptop says, "stopped filter failed 1 page". What can I do?
Okay, regarding this problem:
I'm trying to print to an Advent AW10 printer from an Imac running Yosemite 10.10.1 and it's been driving me nuts for the last two months...
I got on to Advent yesterday and recieved this instruction from their support team this morning and it worked and I'm now printing away merrily:
Please follow below steps:
In Spotlight search window type Terminal and then press Enter.
This should bring up the terminal window/program.
In the Terminal type:
sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf' then press Enter.
It will ask for your password. Please enter system password.(You will not see password entering)
After that type following:
sudo launchctl stop org.cups.cupsd then press Enter.
Try Printing.
I don't think this is specific to Advent and is rather simply an 'opening up' of something blocking the 'printer channels' (layman's terms obviously)
Hope this helps people out! -
I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to
it is a windows 8
Maybe you are looking for
-
Iphone 4 syncing- new pc-help!
I have an Iphone 4 that was synced to my old pc ( the motherboard crashed) so now I have a new laptop and it wants me to re-sync my phone (while erasing everything) to my new pc. So I guess, how do I sync without erasing because my new pc is empty? o
-
How to keep customer Pattern/Die Equipment in our plant without value
Hi! Anybody help me to sort out my problem. The scenario is, How to keep customer Pattern/Die Equipment in our plant without value 1.My client manufacturing material (A), which is used to produce actual finished goods (B). First material (A) is pro
-
I am doing a research project of content-based image retrival using oralce92. I am interested in using Oracle's content-based retrieval feature for images.Can anyone tell me more about how the feature vectors or signatures are created from the color,
-
Can you use a subquery when importing from a file?
I was wondering if the DBMS_DATAPUMP API allows using a subquery (DATA_FILTER) when executing an import from a file? I am unable of limiting my data when creating the export file because my subquery requires a database link, which is not an option on
-
Hi all My question has 2 parts 1) I will need to run a rather complex calculation which involves searching through a rather large dimension (30000 members) and using an allocation % unique to each member, allocate that percentage to other members. So