TS2755 Imessage is failing to send messages

I am trying to send message using my Iphone 4. Recently, I have installed new IOS7 and then new fix of IOS 7.0.2.. My Imessage application keep failing on sending message...
Regards,

A phone reset or going to Settings > General > Reset > Reset Network Settings resolves the issue.
iOS7.0.3 will be available next week that resolves this issue.

Similar Messages

  • 'Failed to send message' on 6303 using PC Suite

    I recently got a 6303 and I get a 'Failed to send message' when I try and send a message using PC Suite. I think there is some configuration issue since I can't see any texts in my Inbox either.
    I've looked at discussion boards and tried the following with no luck
    1. Ensure phone firmware is up-to-date. It is Rm-443 v 8.90
    2. Re-installed latest version of PC Suite (7.1.40.1) after running PC Suite Cleaner
    3. Checked my message settings on the phone - can't see anything that would help
    i've looked at Ovi Suite too and can't send texts using that either.
    the phone sync's fine with Outlook. Any ideas on what I can try?

    Hi,
    It sounds more like a phone related issue to me

  • Why wont imessage on ipod touch send messages to my iphone contacts?

    I have bought my daughter an ipod touch - she wants to use the imessage function to send messages to me on my iphone. The ipod touch lets her type the message but whenever she tries to send it it comes up with a red exclamation mark and says message sending failed. On other occasions it removes her contact list, or the send button wont press. So far she has not managed to send one message.
    Any ideas what we are doing wrong?

    See:
    iOS: Troubleshooting Messages
    Are both you only using the same Apple ID email address (and likely your phone number) in Settings>Messages>Send and Receive?
    Can she Message other iOS users?

  • IMessages Frequently Fail to Send from OSX

    I am having a problem with iMessages through Messages on OSX Mountain Lion failing to send, or messages not being received.  Typically this occurs after I have not sent/received a message to a contact for a period of time, and resending it will suceed and all future messages will succeed for a period of time.  The period of time ranges from minutes to tens of minutes.  At one time it got so bad that no messages would be sent/received correctly.
    Messages works perfectly on my iPhone.  The problem cropped up very suddenly after I replaced my modem/router.  However, it does not seem to be specifically related to the connection as the problem occurs on any network/ISP I have been on with my laptop.  The iPhone works perfect over cellular or over WiFi, including on my home network.
    What I have tried so far:
    1. Re-syncing Messages on OSX and iPhone by signing out on each, and signing back in (and allowing it to pop up the confimration messages that a new device is signed in).
    2. Deleting a bunch of plists (anything with messages or im in it).
    3. Deleting my keychain.
    Doing these can improve it for a time.  Maybe it will work perfect for an hour before it starts to have issues again.
    Does anyone have any further advice?  If not I should probably contact apple directly.
    Thank you for your suggestions.

    HI,
    I did cross my mind that a New router might have a shorter period before closing what it thinks are unused ports if set to use UPnP.
    For example UPnP will basically allow the app on the computer to tell the router which ports to open.
    In Messages with an AIM or Jabber account you can Video chats from the App.
    This means sending a Visible invite on Port 5678 and potentially connecting on port 16402
    Various routers have a default time that these port remain open after the last data passed.
    The AIM logins as well as the Jabber and Yahoo ones are "Always ON" connections which allows the Buddy lists to update virtually instantly when Buddy goes Off Line, Changes their Status or Message or their Buddy Pic.
    It is less clear about the iMessages account as there is not indicator within the app to say whether you are connected to the server or not.
    Having said that you report that an iPhone is having no trouble using the same router.
    The info I have is that the iOS version and the Mac version do in fact use the same ports to login and send Text.
    It would seem the iOS does a better job of keeping the app connected when it needs to be as well as extending the battery life as long as possible compared to the Laptop.
    I think this is related to the way the OS works rather than a direct setting that you might change  (Although System Preferences > Energy Saver might be a starting place).
    I can see where thr problem might be but have no concrete suggestions as to what steps to take next.
    I feel it is going to be a call to Apple.
    8:30 PM      Thursday; June 27, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How do I set up iMessage so I can send messages from my iPad to my iPhone using the same apple id

    I am trying to set up iMessage so I can send and receive messages on my iphone 5 and my iPad using the same apple id.

    I assume that you want to keep the same Apple ID on both devices for downloads and purchases but you just want to know how you can use Messages on both devices without creating a new Apple ID.
    On one of the two devices ....Settings>Messages>Send and Receive at>You can be reached by iMessage at>add another email address ... and enter another working email address. After you enter the email address and it is verified by Apple, go to the InBox of that email account, read the email from Apple and follow the instructions to complete the verification. Then go back to the settings and remove your Apple ID email address. You will now use that new email address at the contact at email address for messages on that device.
    You can keep your Apple ID email address and use that one on the other device.

  • Adapter framework failing to send message

    Hi,
    I am facing an issue in XI, where the adapter framework is getting failed to send the message. The message is also not getting reflected in SXMB_MONI,
    "Transmitting the message to endpoint http://server:8080/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 404 : Not found."
    No service using the ICM port 8080 is working though active. No XI service, even the ping service in sap/bc/ping is not working.
    I have checked the following:
    1) SLDCHECK (browser opening properly). In ABAP part i am getting error
    Use transaction SLDAPICUST if you wish to maintain
    Launching the SLD GUI in a separate browser window.
    => Verify in the browser GUI that the SLD is in a healthy running state!
    Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call returned exception code     3
    => Check whether the SLD is running!
    Summary: Connection to SLD does not work
    => Check SLD function and configurations
    for troubleshooting the above error i have gone through the link
    http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/content.htm
    Still the problem persists while calling function LCR_LIST_BUSINESS_SYSTEM
    2) Then i checked the ping (path - http://server:8080/sap/xi/engine?type=entry ) -- its also not running and showing error :
    Service cannot be reached  with error code 404 not found.
    3) The RFC XIINTEGRATION_SERVER is showing also showing error 404.
    4) Checked ICM port - its 8080
    Inspite of working hard over this issue, still unable to resolve this issue.
    Please help me. Awaiting for your helping suggestions
    Thanks in advance..

    > Still the problem persists while calling function LCR_LIST_BUSINESS_SYSTEM
    > 2) Then i checked the ping (path - http://server:8080/sap/xi/engine?type=entry ) -- its also not running and showing error :
    > Service cannot be reached  with error code 404 not found.
    >
    > 3) The RFC XIINTEGRATION_SERVER is showing also showing error 404.
    > 4) Checked ICM port - its 8080
    >
    have a look for LCR_LIST_BUSINESS_SYSTEM in the below link
    http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/content.htm
    Regards,
    Sarvesh

  • TS2755 I am having difficulty sending messages on my iPad. the send button will not activate. Can someone help?

    My ipad will not send messages using imessage. I works and then stops as if it is locked up. My iphone works well as does my macpro. Any suggestions?

    Did you try downloading the movie from iTunes on your iPad?  I know it takes longer but I'd try that. 
    Also try to reset all settings. 
    Settings > General > Reset. Reset all settings. 

  • How can I set up imessage on iPhone to send messages from the name of number but not e-mail.

    I can set up iMessage on Macbook to send from the name of number, but can't do it on my iPhone after upgrading to 6.1

    If your iPhone and iPad are both running iOS 6, and your iPhone successfully registered it's phone number in Settings>Messages>Send & Receive, all you should have to do on your iPad is go to Settings>Messages>Send & Receive and sign in with the same Apple ID you are using on your phone. 
    If it is, and it still isn't working, try going to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in.

  • HT3529 Does IMessage charge anything for sending messages Internationally?

    When I use IMessage to send messages from Germany to LA will it charge me extra?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    The Message app has two functions, actual iMessages that are text messages that use Apple's servers to connect folks with iOS devices and use wi-fi and possibly a data plan and also text messages using the SMS protocal and can communicate with any cell device with this capability and for which telcos will charge their normal fee.
    If the message bubbles are blue, then they should be free iMessages. If the message bubbles are green, then they are SMS text messages and will incur a charge.

  • Why does iMessage take longer to send messages for certain conversations?

    iMessage can take around 15-20 minutes to send messages to certain conversations, but is extremely fast for others (I've noticed that it's generally faster for relatively newer conversations) off of my phone (iPhone 4S running iOS 8). iMessages for the same conversations send infinitely faster off of my macbook pro.
    It shouldn't be a wifi/data/network issue because messages sent for different conversations off of the same network take different times to send.

    I would delete the contact and then have the other person(s) send you a Mesage and then readd them as a contact.

  • HELP!!!! iMessages on iOS6 is sending messages from my iPhone to both my iPad, my other iPhone and other friends iPhones!  and receiving messages from friends on both iPhones and iPad.

    Why is the new iOS6 using iMessage and FaceTime and sharing messages across all iPad, both iPhones, and friends messages coming in are sent to all units?  SHARING???  How do you fix this?

    HI,
    On the iPhone and iPad you can "turn off" the Apple ID in Settings > Messages > Received At (and possibly) > Caller ID.
    iOS 6 will delete the email/Apple ID across all devices (you get a warning) but presumably Messages is either left alone on the Mac or you add the ID back in again.
    AS has been said you can then set up each device with it's own Apple ID
    9:44 PM      Saturday; September 22, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and and iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • 554 Transaction failed : Cannot send message due t...

    Hello there
    Had a problem with the above about a month ago and had remote techies on m y PC for several hours over two days trying to fix it.  They said it was my PC but in the end it was a yahoo server problem. It's happened again!  However, this time I can receive and send emails but not more than one recipient whereas last time I couldn't send at all.
    I don't have the time or energy to do it all again but, because I work from home, not being able to send emails to several recipients at the same time is a right pain.
    Does anyone from BT/Yahoo know how to fix this without by wasting a whole day with a techie?
    Hoping someone can help.
    Many thanks

    Welcome to this forum. This is a BT domestic customer to customer help forum, any messages posted here do not go to BT.
    Its possible one of the forum members may be able to help you.
    Please look at this thread http://community.bt.com/t5/Other-BB-Queries/Error-code-when-sending-Cannot-send-message-due-to-possi...
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • TS2755 Won't let me send messages to other apple devices

    I am receiving messages from other apple devices but I can't send back any messages.

    See:
    iOS: Troubleshooting Messages
    Note yu can only send Messages to other users who have Messages on their iPod touch, iPad or iPhone

  • Why does my Imessage not receive or send messages

    When someone else messages me on Imessage i do not receive the message although on their Ipod it says delivered, and i also cannot send a message.

    Helloooooo ?
    Anybody ??

  • TS2755 iMessage sometimes not received, when messages in Mac is active and iphone is not

    Hi,
    Lately i didn't receive some messages only later to find them in my Mac's Messages application.
    What i understand from this, is that if my iPhone suffers from temporary disconnectivity then the iMessage is still routed to the Mac,
    but will never be pulled by the iphone .
    If that is the case then when i am in an elevator or out of power , then the iMessage center
    knows i have iMessage "on and active" and it will send it to my Mac and the iPhone will never be notified.
    Correct?
    Thanks
    Yair AKA Zvilich

    The iMessage and Facetime servers are down for the day. People have been having issues since this morning. I called Apple myself and they told me to just wait until this evening and try again but warned that could not be fixed until tomorrow.
    Wait until then and see what happens. You can always call Apple and get a direct update if you still have issues and think it should be fixed.
    Regards,

Maybe you are looking for

  • Slow Build in Builder 3 during Refresh

    I'm having an issue when I build my project it is very slow at: Building Workspace Building all....: Refreshing '/path/bin-debug' any ideas? Using Builder 3 Plug-In on Vista w/ remote ColdFusion 8 Server on LAN for output path. It can take a few minu

  • Face time will not connect when calling on macbook pro

    my face time will not connect to ppl when calling or when accepting a call what can I do to fix this my internet connection is good

  • No devices or device button showing in iTunes 12

    If I plug my iPhone 5 into my iMac, I can usually open iTunes (12, fyi) and see my devices listed. Did so today and the following: 1. I show no devices button in the upper left in iTunes. Have the music, movies and tv buttons and the " ..." only 2. C

  • FlushBeforeQueries Feature cause memory leak?

    Hello, I am testing out the latest release 3.2.4 with the "FlushBeforeQueries" behavior enabled. But ran into a few problems: 1) First I tried it with action which imports a big business object (in XML format - about 2.5MB) into our system with follo

  • Audio Input Gain Too High - Line Input

    Using GarageBand, I'm trying to record audio on the line level input. It records, but it's always too high. I can hear the distortion and see the clipping in GB. Using System Preferences Sound, I set the input level all the way to 0 and it makes no d