TS2755 iMessage problem 7th Sept 2012

My imessage keeps saying "waiting for activation". How would i go about solving this issue?
Is there an issue with imessage currently?
Regards
Nigel

You know that it is iMessage from the send button turning blue.
Try this:
1. disconnect and reconnect to WiFi. Now test again.
2. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
3. Go to settings>general>reset and reset only the network settings. Reconnect to your WiFi. Now test again.
4. Go to settings>general>reset and reset all settings. Reconnect to your WiFi. Now test again.

Similar Messages

TS2755 iMessage problem

My iMessage works except with my boyfriend which is the other number on my bell account. I receive his messages as iMessages but when I reply it sends as SMS. When I send a message to another contact it sends as iMessage no problem. How do I fix this?

It looks like iMessage registration failed.
On your boyfriend's iPhone, go to setting, Messages, If you see "Waiting for Activation", "Activation unsuccessful", or "An error occurred during activation", disable iMessage and then turn it on again.

TS2755 iMessage problems

I was using IMessage last night then my iPod died and soI charged it but then after i turned it on my iMessage stopped working. Idk how to fix it, I tried turning the iMessage on and off but that didn't work, I tried restarting my iPod and even turned off my wifi. That didn't help either. I don't know what to do, help!

Have you reset your phone by holding Home and Power until the Apple logo starts up?

Sept 2012 Macbook Pro dead pixel issue

Hi,
My Macbook pro from Sept 2012 has recently had a major issue with pixels dying, around 10-15 in a few weeks. My Macbook is out of warranty as over a year old so I am wondering what my options are? I don't believe the dead pixels are a fault of my own as I have seen a lot of problems with this issue online.
Thanks in advance.

Unfortunately dead pixels cannot be resuscitated. The solution is a replacement of the display.
Had you purchased Apple Care, the display, if it was outside the Apple pixel display standards, may have been replaced for free.
Ciao.

HT4367 The box will no longer turn on. Bought in sept 2012. Didn't do anything

Went to turn on Apple TV box and it wouldn't turn on. Tried remote from another Apple TV box and still wouldn't turn on. Unplugged and plugged back I'm wouldn't turn on. Tried the other Apple TV in same location and it worked. It looks like box broke? Bought sept 2012 direct from apple store. Mad it's broken. Only use Apple TV box no cable. Is there an issue with them. Will the other one stop working too? How do I fix or get replacement for free. I do not live anywhere close to a apple store

Have you tried connecting to iTunes in an attempt to restore?
http://support.apple.com/kb/HT4367
The device wold still be under warranty so if its deemed defective you would be able to get a replacement. However, you would need to go to an Apple store or at least an authorized reseller

Install problem with Quicken 2012 on Windows 8.1

I have two new computers with Windows 8.1. One is an HP laptop on which I had no trouble installing and using Quicken 2012. Now I want to install the same program on my Lenovo desktop. It is in the form of an exe file downloaded from Amazon. When I execute
it (as Administrator) the installer gets as far starting to disassemble the files for a second or two and then just disappears. I get no error indication, no message and find no trace of the installation files. I don't know what temp file is being used. I
find nothing in the logs either. I have tried the same file used on the HP and even re-downloaded from Amazon.
Other than this the computer runs fine. I have successfully installed half a dozen other programs with no problems.
Quicken 2012 is listed as being compatible with windows 8.
I would appreciate any suggestions on how to further troubleshoot this problem.

Hi,
The installation issue can be caused by several reasons, please try following steps to check the issue:
First, let's boot into Clean boot mode to avoid 3rd part conflict:
How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
http://support.microsoft.com/kb/929135
Then, try to unzip the exe file and install the msi package:
Please refer to the steps here:
http://quicken.intuit.com/support/help/downloading--installing--upgrading-and-converting/error-1911-or-1935-installing-of-quicken/GEN83111.html
If the issue still persists, please provide event log as below for our research. Please upload it to a file sharing service like Onedrive or "Rapidshare" and put a link to them in your reply.
Kate Li
TechNet Community Support

I am concerned that Apple thinks the imessage problem is only affecting a few users. That is not true. It is affecting me as well. Please fix it as soon as possible. Thank You

The imessage problem with IOS7 is affecting me. I just wanted to chime in because Apple said it is only affecting a few users. Don't believe it.

We've added you to the list of affected users & as soon as a fix is availble, we'll notify you .

I have two problems with my 2012 13" MacBook Pro. 1. Gray screen shows at startup 2. Randomly disconnects from network. Any help will be greatly appreciated.

I have two problems with my 2012 13” MacBook Pro.
Gray screen shows at startup
Randomly disconnects from network.
Any help will be greatly appreciated.

First, open Terminal in your Utilities folder and paste this into the prompt line:
sudo update_dyld_shared_cache
Press RETURN. You will be prompted to enter your admin password which will not be echoed to the screen. Press RETURN again.
Next, boot the computer into Safe Mode.
Next, do the following:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

IMessage problem - Cannot get it to work

iMessage problem - I cannot get iMessage to sync. I have a iPhone 4 and iPad 2 both on iOS 5. everything else works fine. I cannot get the iMessage to sync. Both have the same @me id. if I try to add another email I get "iMessage Activation Unable to veryify email because it is already in use." Going crazy for 2 days any ideas?

I'm guessing, but the email address is used as a unique address, (it's easier with an iPhone as it has a phone number). This error could be saying that another iTunes userid has linked with that email address. That is only possible if they verified it.
Do you have two AppleIDs / iTunes IDs in the house, but a family (shared) email address?
Simple solution then would be to create a new gmail email address and use that.

Suddenly applet stopped working on IST 13 Sept 2012 12:25 in 50% Linux Machines

I am using Applet for Raw Dot Matrix Printing. I.e. Its like "lpr test.txt " in linux.
Few days back on 14th august you have disabled the applet. As per forum we have enabled it. Now same issue arrived on 13 Sept 2012 at 12:25 ... Please help me why this happned !!! I can not change the applet as it is working from last 4 years. Same is installed is around 600 machines. Its difficult to write another program ... Please suggest what to di?

Which version of Java are you using? How did you enable the applet?

I am having the iMessage problem following the latest update but am unable to fix it following suggestions on here so far. Anybody have a different suggestion? My phone

I am having the iMessage problem following the latest update but am unable to fix it following suggestions on here so far. Anybody have a different suggestion? My phone & iPad are fine but my husbands phone is the one with the issue. I tried backing it up to my computer but for some reason it won't do that either.

Have a look at this it might help
http://support.apple.com/kb/TS4148

Former iPhone User & Possible iMessage Problems - Textmessage Issue

I have been an iPhone user since the 2G, so about 10 years. In fact, everyone in my family uses iPhones. Even when I decided to change, my
family members remained devoted iPhone users. I loved my iPhone, but in time I realized Apple fostered this cool-kid-lunch-table culture, and I didn’t want to help promote that belief/behavior. The last straw for me was having to play Apple’s upgrade game where little to no innovation would occur.
I had been waiting for a new iPhone since my brand new iPhone 5 got stolen. This should be noted, I did not receive any support from Apple in
the aftermath of that incident. I repeatedly went to the Genius Bar near my apartment, but it was useless. I was told your “Lost” mode or whatever was impervious. (By the way, I spent the next couple of months telling at&t to stop sending me bills for calls being made to Russia on that iPhone.) I ended up using the 4S for almost two more years. Given Planned Obsolescence (to be fair, all the smart devices do that (in theory all consumer goods)), those two years were grim. (i.e. phone interviews for a job were next to impossible)
Thus, when I was eligible for an update, I got the Nokia Lumia 1020. Apple’s smart, it ended up hiring Ari Partinen, the guy who designed and help implement a huge selling point of the device, the 41 megapixel camera. Much like the 2G, theNokia Lumia 1020 has problems. Companies cannot (or in some instances, will not) innovate and (truly) improve their products without demand andcompetition. (i.e. The fourth (or the fifth) generation of Apple tablets started coming out with Pages after the very first Windows’ tablet came with MSOffice during the first year's use). Thus, I had to forgo the Nokia Lumia 1020 on the whole because the demand to improve the product is not there like it was for the 2G.
Given the circumstances, at&t suggested I get a different smartphone, I asked to go back to the iPhone, but I was told I could not due to
some sort of prevision in Apple’s contract. Something along the lines of – "You should have chosen the iPhone during your upgrade." I was randomly sent an Android device, and told this is the best thing I’m getting. Take it or leave it.
To add, one of my problems will mostly likely rollover to the Android phone . For some unknown reason, I stopped receiving group texts (from iphone users), which is mostly likely an imessage problem. It is probably an imessage problem because I experienced it when I first switchedto a non-apple device (three months ago, with the Lumia 1020).
As such, I signed into my apple account on their support site, to unregister my devices (again). I (thought) deleted everything three months ago, but it looks like thestolen iPhone 5 is on there.
Is Apple literally FORCING me back to them (while simultaneously, barring me from accessing
their product)?
At this point, I am too exhausted (and have to get back to my responsibilities), please figure something out with messages being sent via wifi (aka: imessage).
PS. Forgive the editing errors, formatting problems wouldn't allow me to resolve them. ....Apple, go listen to some Echosmith. The cool kid culture needs to be improved. You are capable of making the needed improvements.

ChrisJ4203 wrote:
I'm sorry. This is a user to user technical support forum. Apple does not participate in the forum. Do you have a technical support question in there. I read the entire thing, but could not get anything but complaints out of it. If you want to tell Apple something go to the feedback page at www.apple.com/feedback.
I concur.

Problems uninstalling SCVMM 2012 RC

Hi,
I'm currently trying to uninstall the SCVMM 2012 RC, but before I pass the page Retain/Delete DB, the wizard dies, I've check the log SetupWizard.log, and it shows this error.
09:20:10:Uncaught Exception: Threw Exception.Type: Microsoft.VirtualManager.Utils.CarmineException, Exception.Message: VMM cannot access registry key value MachineName under Software\Microsoft\Microsoft System Center Virtual Machine Manager Server\Settings\Sql.
Verify that the registry key value exists, and then try the operation again.
09:20:10:StackTrace: at Microsoft.VirtualManager.Utils.RegistryUtils.ReadRegistryValue(String key, String valueName, Object defaultValue, Boolean throwOnError, RegistryKey rootHive)
at Microsoft.VirtualManager.Utils.AppSettings.get_SqlMachineName()
I've try adding the key MachineName to Software\Microsoft\Microsoft System Center Virtual Machine Manager Server\Settings\Sql. but the error still appears.
anyone can help me with this?
Diego

Hello Diego,
Is this issue related with upper question?
problems uninstalling SCVMM 2012 RC
http://social.technet.microsoft.com/Forums/en-US/virtualmachinemanager/thread/3ce73dab-222b-468e-9cbf-75245f294c6a
Sincerely,
Murat Demirkiran
If the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. www.scvmm2012.com (TR Language) Please note that I'm not a Microsoft Representative
or SpokesPerson.
Hi Murat yes, I solve the problem uninstalling, but know I have another one, I'm trying to install the SCVMM 2012 RTM, but when I get to the DB selection (the 2012 RC backup), it throws an error; I was looking in the forum and I found this solutionhttp://social.technet.microsoft.com/Forums/en-US/virtualmachingmgrsetup/thread/d64abf06-a3aa-421e-9abf-f88249fe233a,
but I call microsoft for support to get the hotfix KB# 2705942, but the reply to me that they didn't know anything about that, that I should try the forums...
can anyone help?

I bougt Creative Suite 6 on 25th sept 2012. Now I'll buy a new PC. Can I install Creative Suite 6 ?

Dear,
I bougt Creative Suite 6 on 25th sept 2012. Now I'll replace my PC. Can I install Creative Suite 6 on this New PC,
THx
Guy Heyligen

Yes.
Mylenium

TS2755 iPad iMessage problem

Hi, I having some issue for my iMessage. I already verified and activated mt iMessage account but when I finished typing the sentence and wanted to send to my friend who using iPad and iPhone but the send button doesn't allow me to click and I send the message too.
Appreciate if you could assist me on this. Thanks :)

make sure you have their correct information highlighted. For instance, when you verified you're account, you put in an email address. make sure you are using your friend's email address they setup for their ipad exactly how they made it.
you need to also make sure you're not typing in their phone number as this will not work (yet).
if you can not send you may need to also make sure you are connected to the internet.

TS2755 iMessage problem 7th Sept 2012

Similar Messages

Maybe you are looking for