TS2755 Imessaging app is hung and application closes. large message in queue. Restarted didn't help.
My kids were emoji bombing each other with iMessage. now application is hung up. Tried closing it, restart phone, turn on and off I messaging and Sms messaging in settings. Deleted photos to make more room..,
I just have a blank screen in message and then the focus shift off the app. Please help!
Hello 123Beth,
I suggest backing up and restoring the iPhone if iMessage keeps quitting unexpectedly.
iOS: How to back up and restore your content
http://support.apple.com/kb/ht1766
All the very best,
Sterling
Similar Messages
-
why every time i hit my new message or iMessage notification it goes and creates a new message to the person who sent the message?
Hey Rkbethel
There are two ways to resolve this for you. For the first is go and do a Reset All Settings by going to Settings > General > Reset > Reset All Settings. It will not delete anything on your iPhone, but it will put all settings back to default. If it does not work, the next step would be to restore the iPhone back to factory settings.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Trying to discard an app into TRASH and I receive a message that "app cannot be removed because it is locked." How can I unlock an app???
Something may have corrupted your User account permissions. Whatever it was that did that is likely to do it again, and will require further investigation.
To reset your User account permissions perform the following. It may not fix the problem but it will not make it any worse:
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac.
When the Mac OS X Utilities screen appears, select Utilities > Terminal.
In the Terminal window type resetpassword and press Enter. A window will open behind Terminal that looks like this:
Do not enter a new password.
Select your startup volume at the top. From the dropdown below it, select the user account with the problem.
At the bottom of the window, you will see Reset Home Directory Permissions and ACLs.
Click the Reset button.
Quit Reset Password
Quit Terminal
Quit OS X Utilities and restart your Mac.
Back up your system before doing anything else because disk corruption is another possibility that has to be considered. -
HT204053 iMessage on my computer, and receiving the same messages on your iPhone how do I do it?
iMessage on my computer, and receiving the same messages on your iPhone how do I do it?
http://support.apple.com/kb/TS1538
Going to venture a guess your Apple Mobile Device service isn't started. -
I am running Itunes in Windows 7. Every time I exit, it restarts in a few seconds. If I restart my compter and forec close it, it does not restart, but If I use it at all the whole loop starts again.
Sorry, just to confirm, I DID NOT ACTUALLY ANSWER MY OWN QUESTION!
I replied to the previous message from my iphone and I managed to hit the link to "This has answered my question" by accident!
I AM STILL LOOKING FOR A RESOLUTION TO MY ORIGINAL PROBLEM. CAN SOMEONE ALSO NIW TELL ME HOW TO GET RID OF THE GREEN TEXT TGAT SAYS TGAT MY QUESTION IS ANSWERED? That is a pain! It should at least ask you to confirm that your question is actually answered and you didn't hit it by mistake, like I did! -
I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.
Back up all data. Rebuild the mailbox.
-
my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out
You've managed to permanently damage the phone. As gdgmacguy suggests, buy a new one. Preferably from a legitimate source.
You may also want to keep in mind that it is illegal to use the Gevey SIM in pretty much every country on the planet. It may still be legal on the continent of antarctica, but that's only because penguins don't use cell phones as a rule. -
I have purchased a new Mac power book 10.9.2. I cannot open adobe illustrator CS4 and get the error message 150:30. Can you help?
You are welcome, Sharon.
You should be aware that the newest version, CC, is only available as a subscription.
CS6 can be purchased at Adobe, or second hand, see below.
Older versions such as CS5 can only be bought second hand, with a licence transfer through Adobe, requiring that the licence has not been used as a basis for an upgrade. -
HT201210 my iphone 3gs is showing errors wen i turn on debug and some apps will open and then close.
my iphone 3gs is showing errore wen i turn on debug and some apps will open and then close
There's an apple store in my city but it is about a 20 minute drive and I do not have apple care. Do you think they would still help me?
-
So, I have created a cool project that was a lot of hard work in After Effects CC (Mac), While rendering a project in After Effects CC (Mac) , the application closes half way, saying it quit unexpectedly. Here is the link to an error log which is automatically recorded when After Effects crashes:- After Effects Crash (Mac) - Pastebin.com
I have tried to render this project at least 5 times, shutting and restarting my computer. Please Help!
Here is my computer specs if needed;
Operating System: Mac OS X Mavericks version 10.9.4 (13E28)
Processor: 2.5GHz Intel Core i5
Memory: 4GB 1600 MHz DDR3
Graphics: Intel HD Graphics 4000
Screen Resolution: 13-inch (1280 x 800)
Hard Drive: 500GB -- 186.49 GB free space.
Thanks
MilanElement 3d renders using your graphics card. Unlike After Effects, what GPU you're using matters a lot for Element.
As it is, you don't really have one.
You could try rendering an image sequence and then picking up your render where it left off when it crashes, but if a certain frame is just too much for your computer to handle, there's not much we can help with. I'd suggest adding a GPU that Element can use. -
My brand new iPhone 4 is quitting apps unexpectedly, turning into a black screen and then restoring to home page. Restarting procedures didn't correct problem. Shall I follow full resetting instructions?
Thanks for the straightforwardness roaminggnome - I wasn't sure if this problem qualified as deseving a reset. Unfortunately, for some reason I can't explain, your response remained undisclosed to me for a while, the next reply after yours took preference and I ended up doing as Meg St.Clair's susgested and initiated download, installation and syncing of Smartsync which is now taking ages to finish... If problem persists shall do the resetting and restoring.
-
My iPhone I wanted to update music in MacBook Pro but I have never connected my iPhone to the Mac book and now older messages and apps would appear and music wouldn't play none of all 550 songs HELP
Welcome to the Apple Community.
Unfortunately, if Apple simply allowed people to log into different accounts and download content, everyone would be using everyone could share everyone else's content and bypass the need to purchase anything. To protect against this, they limit you to logging into a new account to once every 90 days.
If two or more of you, have different accounts and use only one computer, you should each have your own user account on the computer, to avoid the need to log in and out of iTunes. -
TS2755 every time i try and sent a text message it brings up an old conversation
every time i try and send a text message from new it brings up a previous conversation in the box i cant seem to get rid of it
I have the same issue it randomly does it to it won't send any of my messages at all but I found a way to fix its been working for since I've done it.
I have a sprint iPhone all and if you have sprint all you have to do is go to your iPhone keypad and dial ##873283# then a message will pop up saying "starting service update" when finished another message will pop up saying "service update complete"
From here this should fix your problem only if you have sprint if not try calling Verizon if you have Verizon -
Trying to install Yosemite - seems to have frozen / stalled and now can't quit or restart or anything - help!
If you have another computer that is on the same network as the Mac you're trying to upgrade, you can try to "ssh" in to the mac while the upgrade process is running. "ssh" is a command available on many computers (built in to Linux and Mac and not sure if it is native app on Windows or not). For example on a Linux box trying to login to a Mac you could (assuming the IP address of the Mac is 192.168.99.99):
ssh [email protected]
The authenticity of host '192.168.99.99 (192.168.99.99)' can't be established.
RSA key fingerprint is c2:2c:8f:f5:82:77:85:69:3a:ac:3e:30:62:55:14:1f.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.99.99' (RSA) to the list of known hosts.
Password: (your password for the macuser account will not be echoed)
Last login: Thu Nov 27 18:16:45 2014
Macname:~ macuser$
Once you get logged in, you can do a couple of things to see if things are progressing. Try to do a couple of "df -k" commands a minute or so apart (maybe a little more) and see if the "Used" and/or "Available" column numbers change. You can also try a "top" command to see what processes are running and which are using cpu and other resources. Do a "man top" or "man df" to see more information about these commands.
Be careful and not change anything while this upgrade is proceeding - don't remove files or change things with the system. Also note that depending on which phase of the upgrade process it is in, the disk space numbers may not even change. But the "top" command should give you a very good indicator on if anything is really going on. Another good thing to look at is to do the following:
cd /var/log
tail -f install.log
this will show you all/most of the commands that are being run as the upgrade is in progress. Just control-c to abort the "tail" command.
Once you have convinced yourself something or nothing is going on (the time estimator seems to be horribly unreliable in the couple of times I've watched the upgrade process), then just let it finish and it should reboot at the end of the process. To log back out of the Mac, just type in the "exit" command followed by an Enter or Return.
This all assumes that you had setup "Remote Login" in the "Sharing" System Preferences pane before hand on the Mac.
Good luck...
exit -
hi,
I could not log on my Windows 8.1 because it was telling me the password is not correct while the passwoord was correct.
so I serached IN Google and found how to work some security files like Ultiman en CMD to clear the password and log again.
but It didn't work because I think I had Microsoft account . I had used this techniek before whit a normal user account and it had worked .
now as a computer man I like to know why changing some keys in config didn't help to clear the password with windows account on windows 8.1.
2- second I want to know if there is other ways to solve such a problem because my work is to solve computer problems!
johan
h.davidHello h.david,
It is not recommended to use the command to clear or break the password.
Breaking password will create safety risks on Windows security.
It is recommended to follow the step provided by T. Kujala.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Maybe you are looking for
-
Hi, This is the VB6 statement I have. m_conApp.Forms.ActiveForm.Items.Item("5").Specific.String = "Something" So please help me to convert this into c#. becauses it causes some confusions for me and difficult to find a solution from SDK help center.
-
Hi There, We are currently in oracle application 11.5.9 and planned upgrade to 12.1.2 We would like to know the following 1. Is there any change in the table structure of OM, AR and GL modules in 12.1.2 when compared to 11.5.9 2. What would happened
-
How can I install a trial of my purcahse before retrieving my receipt with a serial number?
The email says that after I have submitted my academic verification: "We will review your identification within one to two business days of receipt. You will be notified when your identification is approved or if there is an issue with the provided i
-
With the recent update and the new photo app installed on my imac, I can no longer open up any of my old iphoto libraries that I have backed up on an external hard drive. How do I do this? Iphoto has disappeared so I can no longer do it that way, and
-
I'm trying to extract audio files from my OLYMPUS Digital Voice Recorder VN-6200PC I am getting this error whenever I try to play its file type on my MacBook Pro,"The document "VN622195.WMA" could not be opened. The movie's file format isn't recogniz