TS2755 messages using a ton of space 4gb ????

I have a iphone 5. i have about 100 text message treads in my phone. if i go to settings, usage the phone says i have used about 4gb of space for messages. that seems to me like a lot. it is max of 100 pages pg texts and a few low res photos mixed in.

Hello there, jerion.
The following link to the iPhone User Guide goes over the steps for deleting messages:
Manage conversations - iPhone
http://help.apple.com/iphone/7/#/iphf2d85437
Delete a message. Touch and hold a message or attachment, tap More, select more if desired, then tap . To delete all text and attachments without deleting the conversation, tap Delete All.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

IPhone 4s sms/text message tone is double when receiving a message, using tri-tone?

When I am reciving a text message (using the tri-tone for the text tone), it sounds like its doubled tone....

I just discovered that it's related to iMessage. If you have the e-mail sound turned on in settings-sounds-new mail, it give you one tone for the iMessage and the second tone because you are receiving the iMessage at your e-mail address. This seems to me like it's a bug and that they should only give one tone for an iMessage and still allow us to receive tones for e-mails. Hopefully it'll be fixed in the next iOS release! :) As a workardoun until then, if you turn off the email sound, you'll only get one tone for a message, but you won't get any e-mail tones.

TS3212 I just purchased a new iphone 4s and I am trying to load some music from my itues. I am getting a message that says not enough space. I checked my phone and it shows i have 5.1G available. do you know how to fix this problem?

I just purchased a new iphone 4S and I'm trying to loan some music from itunes. I keep getting a message that says not enough space on my phone. I checked my phone and I have 5.1G available. I deselected all the songs on my itunes to try and get it to sync and I keep getting the same message. Any tips?

Hey csumner1,
Thanks for the question. I understand you are receiving a "Not enough free space" alert when attempting to sync your new iPhone 4s. The following article may help to resolve your issue:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503
Resolution
Try disconnecting and reconnecting your device, then syncing again to solve this issue.
Orphaned files may remain on your iOS device if it is physically disconnected while syncing music, podcasts, videos, or photos. This can prevent iTunes from syncing the iOS device on subsequent sync sessions. When this happens, the Capacity indicator in iTunes may report a large amount of "Other" disk usage for the iOS device. To resolve this issue:
1. Turn off the music or photo sync option in iTunes for the device.
2. Click Apply to sync the changes to the device.
3. Turn the music and photo sync options for the device on again.
4. Click Apply again to try to sync the device to iTunes.
          - If the 'Not enough free space' alert appears, continue to step 5.
5. Turn off the automatic syncing functions for the iOS device. To do this:
          - Select the iOS device from the iTunes window and click the Summary tab.
          - Deselect "Automatically sync when this device is connected" and select the "Sync only checked songs and videos" checkbox.
          - Click Apply to sync the changes to the device.
          - Reduce the amount of data that is being synced to the device and resync the device. For example, if syncing your Music library exceeds the memory capacity of the device, choose "Selected playlists" to transfer rather than "All songs and playlists" under the Music tab in iTunes.
If the 'Not enough free space' alert appears, continue to step 6.
6. Restore using iTunes.
Thanks,
Matt M.

I have Mac OS X 10.5.8 on mid-2009 Macbook Pro (683MB RAM used, 81.67GB free space), do I need additional RAM to update to Snow Leopard?

I have Mac OS X 10.5.8 on mid-2009 Macbook Pro (683MB RAM used, 81.67GB free space), do I need additional RAM to update to Snow Leopard?
I was told I can update to Snow Leopard without adding RAM but just read on another discussion thread that someone with the same age Macbook Pro that I have was told to purchase more RAM then update to SL.
Serial # W8*******6D
Model Identifier: MacBookPro 5,5

Thanks!
I ordered 4 GB from crucial.com, product info below. Do you know if it will be 1 or 2 sticks? If only 1, will I be able to use the original 2 GB installed in the machine and the 4 GB from crucial.com?
Part Number: CT4G3S1067M
Module Size: 4GB
Package: 204-pin SODIMM
Feature: DDR3 PC3-8500
Specs: DDR3 PC3-8500 • CL=7 • Unbuffered • NON-ECC • DDR3-1066 • 1.35V • 512Meg x 64 • lead free • halogen free • for Mac

Why does my camera roll use 10GB of my space, when I only have 508 photo's and video's on my camera roll?

I have some problems with the space on my Iphone 4s. I always get a message that says that I can't rec or can't take another picture because I don't have enough space on my phone. When I go to settings and check, my photo's and video's use almost 10GB (9,8GB). I have 407 pictures and 101 video's (not very long videos, more like short but many). In total i have 508 photo's and video's in my camera roll. My friends have like over a thousand pictures and video's, but they haven't used like 10GB of their space. So why does my 508 picutures and videos use som much more space??

Videos add up fast. A 30 second video on a 4S could easily be 85 MB. 101 of these would be almost 8.6 GB. Add 407 photos at 3 MB each and you reach 9.8 GB.
I would suggest you import some of these to your computer (especially some of the vidoes) and delete them from your phone, as explained here: http://support.apple.com/kb/HT4083.

IOS Cangjie input method can not be used. Original with Space Bar word selection function is invalid, as soon as possible to solve, it will affect the most users in Taiwan and Hong Kong.

iOS Cangjie input method can not be used. Original with Space Bar word selection function is invalid, as soon as possible to solve, it will affect the most users in Taiwan and Hong Kong.

No PR1.2 Firmware update, No update for Nokia Messaging, No updates for Ovi Maps .... Why is the N900 the forgotten stepchild ?
"PR1.2 is still being tested - http://twitter.com/luovanto/statuses/13087245356"
Hong Kong Launch http://www.youtube.com/watch?v=pY8zCBzvQLo

Using custom tones

Can I use custom tones for email/messaging alerts? It doesn't matter how I try I have only been able to use them as ringtones so far, I have a lumia 720. Thank you
Solved!
Go to Solution.

Is in hand for GDR3 firmware: http://answers.microsoft.com/en-us/winphone/forum/wp8-wptext/can-i-customize-my-text-ringtone-on-nok...
Happy to have helped forum in a small way with a Support Ratio = 37.0

CUE: disable prompt "Record your message after the tone."

I would like to disable the prompt: "Record your message after the tone. When you are finished, hang up or press # for more options."
I found the „no voicemail conversation caller recording-prompt“ command, but it doesen’t seem to work.
Is this command supported on an UC540?
Regards
Stefan...

From exec mode, use the command
Router# Service-module i0/0 session
You will be connected to the Cue console
Enter your username and password (same as the credentials you used to access the CLI)
Once logged in, press enter to display the cue console (it's waiting for input, so pressing enter re-displays the command line)
Enter configuration mode (conf t), type the command, issue a copy run start to save, then type exit to return to the IOS CLI

Why can I send email from my iPad, but my iMac which is connected to the same modem keeps telling me that it can't send the message using the same server?

I have an iPad 2, connecting via Wifi to an Actiontec Q1000 modem. The iMac (3.06 GHz Intel Core 2 Duo, 4 GB 1067 MHz RAM, running OS 10.8.2) is also hard wired to the same modem. Internet access is via CenturyLink. Main email is from Shaw cable in Calgary (Phoenix is a vacation property), not through CenturyLink.
Can receive email on the iMac, but every time I try to send, I get a pop up saying "Cannot send message using the server .......". Further prompts me to verify the address in the email, and SMTP settings in Mail preferences, or to select a different outgoing mail server. I've tried using a number of servers, always the same result.
Using same settings in both devices.

Mail is not my forte, but what I noticed was that you have Centurylink and presumably have your Mail set up with their settings? But then you mention Shaw/vacation property/etc - you can send out email only through the server that you have set up as an account using the ISP you are using. If you switch places, do you have separate accounts set up with both Centurylink and Shaw so you can switch and use whichever one you're at? A Phoenix ISP won't work with a Mail POP account unless you're in your home - Phoenix - area.
Do you have a data plan with your iPad? That would explain why that works - it'll function sort of like a cellphone - works anywhere where there are signals.

"cannot send email message using the server icloud" on 10.6.8

I use mail from my desktop, not from iCloud on the Internet. I have a MacBook Pro with 10.6.8 Snow Leopard. My mail was working fine until yesterday.
It says "Cannot send message using the server iCloud. connections to the server smtp.me.com on the default ports timed out. Select a different outgoing mail server from the list below.
The list has:
ICloud offline
and Icloud
Neither of them work.
What has Apple changed regarding this in September?
(I know others have posted similar message, but they were on 10.7)

Same problem here.
Recently an @icloud.com version (alias) of my existing @me.com email address appeared on my account. I can still send messages form the OSX build in Mail client as long as I am using the @me.com version of my email, but I do get this message when I try to use the new @icloud.com account.
My account with iCloud states that both @me.com and @icloud.com versions of my email are active.
Would be nice to know if this is a temporary problem of if this is a permanent one.
The settings on the outgoing mail server are default as retrieved from apple when I configured the @me.com email for the first time. I went through the troubleshooting suggestions as provided on Apple website, double checking all the settings, no joy. At the very list I can still use the old @me.com alias with no problem (for now)
MacBook Pro / Mountain Lion 10.8.2

"Cannot send message using the server....."

Hi all,
Considering the nature of the problem I am about to relate I would have to say at the outset that I would be very very surprised if other people have not come across this problem, so here goes...
We have around 60 users of Apple Mail from both 10.4 and 10.5, so varying degrees of versions of Apple Mail however most if not all are updated to 10.4.11 and 10.5.2.
We have been plagued with people being frustrated about emails bouncing back with an immediate error which is basically the following...
"Cannot send message using the server smtp.xxx.com:user
Sending the message content to the server failed.
Select a different outgoing mail server from the list below etc etc"
I am sure a lot of you have seen this error.
However, it is totally random but I am at the end of my tether with it. It generally revolves around emails with attachments and can be totally random. I was trying to send a screenshot today, very small screenshot, using the Apple-Shift-4 technique, sent the .png file, then saved it out as a .jpg, nothing. Tiny file, around 5k. Got the error above, took it out, sent no problem. Other similar files on the desktop refused to send but a .pdf did. I then thought it might be our server, so sent teh same attachments using my .mac account. Same result and failed to send. Reports from other users in our group show that they too get random results, maybe moving the attachment in the email makes it go, sometimes putting it before your signature, sometimes putting your signature copied and pasted in so many times makes it work, all sorts of methods but all resulting in the same conclusion, Apple Mail can be very unreliable.
We have even migrated some users to Entourage and the problem disappears. Even to Thunderbird, but those users miss the search capability as it is quicker and more reliable. So they want to go back.
Considering I have been struggling with this issue back in the day when we were on the Apple Mail related version in 10.4 I was hoping that the version released in 10.5 would remedy the problems. Sometimes I feel it has just got worse.
Is anyone else experiencing this sort of difficulty in Apple Mail, I really feel isolated and at a loss with how to remedy this for so many users.
If anyone can share their experiences and how they have got around similar issues in Mail I am all ears and open to any suggestions.
Thanks everyone for taking the time to read through this. There is more but the experiences are so random it is not worth trying to put it all down.
Thanks again.
Gerry McCoy

I went in to Connection Doctor and. oddly enough, for this Mac account it said I was on Port 25. Si I changed it to Port 587 and saved the changes.
Still, I have the same problem with the same error messages.
I go back to the mail preferences > Accounts > Advanced and it shows Port 143 still there grayed out.
What about SSL - it's not checked.
Odd that this problem only seems to be from one .mac account emailing to another .mac account. Could the server be down?

Cannot send message using the server (null)

i use mail 2.1.
i have a .mac account and have three other email accounts attached to my mail account.
lately, i cannot send any email.
the switchiing ports fix hasn't helped either.
this is the error message:
CANNOT SEND MESSAGE USING THE SERVER (null)
The server response was: 5.1.0 <email [email protected]>...
From address does not match authentication.
Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
Message from: email <[email protected]>
Send message using: [there is a combo box here with all the four accounts servers listed]
no matter which one i pick it doesn't work and no email is sent.
anyone have this error before? or now how to fix it?
i'd be appreciative.
thanks
1.67 GHz Power PC PowerBook G4 Mac OS X (10.4.6) Sony HDR HC3 HD HandyCam MiniDV

I was having a similar problem (don't feel like typing all the details)
I was about to to delete my com.apple.mail.plist, when finally it hit me.
I ran ethereal (again, I'm sorry, but learning how to use ethereal is a topic unto itself). Following the TCP stream (ie. looking at the smtp messages being sent back and forth) I came across two problems. For some reason my port number was set to 567 or something like that, when it's supposed to be 25, as I had originally set it to.
Once I corrected the port number I started receiving an error message from the smtp server. It said the return email address could not be authenticated. (using xyz.com as an example) The correct return email address was supposed to be [email protected], but for some reason it was changed to john@xyz in the account settings.
Anyway, to get to the point, another thing to check is that your return address has been set correctly, and if all else fails, make sure you have X11 installed and use fink to install and run ethereal. This will let you know if you are actually connecting to the server, and will show you any error messages.
PS. I think this problem started occurring with the last update made to mail. I believe it somehow corrupted my settings. This would explain how my port number could have been changed to the default port number of .mac mail.

OSX Mail - Cannot send message using the server ....

Hi there,
Mac Pro with OSX 10.6.
*Can receive mail, but can no longer send email* using the program Mail.
Been getting the popup "Cannot send message using the server [shawmail.vc.shawcable.net] for the past 3 days. I hadn't changed anything about my computer, and have had the Mac for 2+ years. So this just started doing it on it's own.
I had a technical support guy from my service provider even interface with my computer, where he could see my desktop right over the internet, and he couldn't get it fixed either.
I googled this problem, and found solutions like:
1. Uncheck "Use SSL" (Done that, and it was never checked "on" to begin with)
2. Make sure Authentication is set to none, with no password (done that, and it wasn't set with a password to begin with)
3. Delete [user]/Library/Preferences/com.apple.mail.plist (done that, didn't do anything)
4. We even totally deleted my account, and started a new fresh one. Didn't work
The tech support guy did show me a way to email online, using the same email account. That worked, but it's a hassle to go onto a web-based email program -- it's not my preference. So, with great certainty, it's not my service provider, because I was able to send emails on this web-based email program using my email account.
So there, I'm stumped.
Hopefully someone can help. What's bizarre is that googling this problem, I have found many other people that say it happens arbitrarily, out of nowhere.

I can't believe how ridiculous this issue is. i have been searching for days for a solution to this. i have tried EVERY recommendation on these forums and nothing works. It appears that this issue dates back to TIGER. I had this problem back in January and just bagged figuring it had something to do with iweb. I bought a new html program and was able to send out my newsletter last month no problem. Suddenly, one month later- here i am again, unable to send out my newsletter with no help from Apple or verizon, or these forims, or anyone else. To think that a company that I have stood behind and loved so much can't be be bothered fixing such a simple issue that has been going on now through 5 OS's (I am using Lion but I had the issue using leopard as well) is a disgrace.

Message uses a character set that is not supported by the internet service

Does any one have any advice on how to fix this problem?
E-mails sent from my iphone 3G periodically arrive in an unreadable form at the recipient. The body of the e-mail has been replaced with the message "This message uses a character set that is not supported by the internet service...." The problem e-mails also include an attachment that contains an unformatted text file containing the original message surrounded by what appears to be lots of formatting data that is displayed as gibberish.
This occurs sometimes, but not always, even with the same recipients. I am sending e-mail through a G-mail account that is configured on the iphone using IMAP. I have tried the gmail account to use the two available formatting options for mail, but neither fixes the problem.
I have also upgraded to 2.01 and restored a few times without impact.

Hi,
I got somewhat similar problem with special charecters(German umlaud �,�,�..).
I create a file with java having special charecters in it. Now if I open this file I am able to view the special charecters in it.But If I attach this file send it using following code then receiver can not see the umlaud charecters in it.They get replaced by _ or ?
MimeBodyPart mbp2 = new MimeBodyPart();
FileDataSource fds = new FileDataSource(fileName);
mbp2.setDataHandler(new DataHandler(fds));
mbp2.setFileName(output.getName());
Multipart mp = new MimeMultipart();
mp.addBodyPart(mbp2);
msg.setContent(mp);
Transport.send(msg);
From you message it looks like you are able to send the mail attachment correctly(by preserving special charecters).
Can you tell me what might be wrong in my code.
I appriciate your efforts in advance.
Prasad

HT1296 When I send a message on MESSAGES using my iPad2, they do not show up on my iPhone or my MacBook Mountain Lion messages. Did I miss a setting on any of the devices as I thought iCloud took care of syncing all of my devices

When I send a message on MESSAGES using my iPad2, they do not show up on my iPhone or my MacBook Mountain Lion messages. Did I miss a setting on any of the devices as I thought iCloud took care of syncing all of my devices

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
http://www.macobserver.com/tmo/article/messages_why_your_chats_dont_show_across_ cross-device/

TS2755 messages using a ton of space 4gb ????

Similar Messages

Maybe you are looking for