TS2755 Phone disabled

Phone has been disabled because someone tried to enter password to many times

Ok.
Do you have a question?
The manual says to restore the iphone when this happens.
If you cannot restore:
iOS: Unable to update or restore

Similar Messages

  • HT4993 I have an iphone5 and i forgot my password my carrier is sprint. i do i reset phone i have added the wrong code so many times the screens reads : phone disable" pls help

    i need help i cant remeber my password and i have tried so my times.The front screen reads " phone disable"     pls help my carrier is sprint

    iOS: Forgotten passcode or device disabled after entering wrong ...

  • When im accessing the internet using my iphone i cant use it because i am having a grey screen and the phone disables itself. how can i fix it. thanks.

    when im accessing the internet using my iphone i cant use it because i am having a grey screen and the phone disables itself. how can i fix it. thanks.

    You must have a valid form of payment for the app store in the country you are using. Most app stores are separate legal entities to comply with local laws. It is possible to have an account without a credit card, however; see: http://support.apple.com/kb/HT2534

  • HT201210 hi,i forget my passcode and my i phone disable (i phone 4)i connect to i tune and try restore my i phone but error occuerd 3194

    hi i use i phone 4 and i forget passcode and my i phone disable i try to restore but error occur 3194 what i do

    http://lmgtfy.com/?q=iPhone+error+code+3194

  • Pass code attempts exceeded,says" i phone disabled, connect to i tunes" how do i restore my device?

    pass code attempts exceeded,says" i phone disabled, connect to i tunes" how do i restore my device?

    See here: http://support.apple.com/kb/HT1212

  • HT201210 hai.can i check with u..i forgot my password..n its stated phone disabled n connect to itunes..so how do i continue from here..n is my data still in my phone..thanks

    hai.can i check with u..i forgot my password..n its stated phone disabled n connect to itunes..so how do i continue from here..n is my data still in my phone..thanks

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • What do i do if i forget my passcode and the phone disable its self

    what do i do if i forget my passcode and the phone disable its self

    Do as the manual instructs and restore.
    iPhone User Guide (For iOS 5.0 Software)

  • Forgot Passcode - Phone Disabled - HELP!

    I am currently visiting New York from Michigan. While here, I changed my iPhone passcode a few days ago and now cannot remember what I changed it to. After many failed attempts, my iPhone is disabled and states that I need to connect to iTunes. Since I am in New York, I dont have my computer that I normally use to sync my phone because it is in Michigan. When I login to my friend's computer in iTunes, an error message comes up when I plug in my phone that says that my iPhone is locked and I need to unlock it before I can proceed with syncing.
    Help! I am traveling and do not want to lose my phone numbers! I went to the apple store but they stated that if I let them restore it, I would lose everything on the phone. Any suggestions!?

    You only have 2 options which you already know :-
    1. Let the Apple Store Restore the iPhone which will erase all the contents
    2. Wait until you get home and connect the iPhone to iTunes
    The whole purpose of the security code is to make it impossible for people to see the contents of your phone. If there was a way around it then it would be useless. Next time don't mess with the code unless you can remember it.

  • HT201412 Phone disabled.  Tried restoring and clearing to factory condition but no results.  Phone still disabled.

    My phone is disabled, can't use.  Tried restoring to factory condition to no avail.  What can I do now?

    What happens when you try to restore to factory? See this support document for a disabled phone and what to do. http://support.apple.com/kb/ht1212

  • HT1212 my phone is disabled and after I restored my phone it still says phone disabled.

    I downloaded iOS7 and typed in the wrong password. My phone said it was disabled. I restored my phone and it still says disabled. What can i do?

    Read the article you linked.

  • TS2755 iphone disabled connect to itunes

    message on the phone it is locked iphone disabled connect to itunes

    Force the phone into recovery mode, as described here, and restore it:
    http://support.apple.com/kb/HT1808
    This will remove the passcode.

  • Got my i phone disabled because i tried my pass code too many times  what can i do now

    I locked my i phone by entering my unlock code too mamy tiimen and now its disabled. cant get into it     LOCKED ME OUT!  need help

    See http://support.apple.com/kb/ht1212

  • HT4623 phone disabled what to do?

    disabled phone how to restore

    1)  Connect to iTunes on the computer you usually Sync with and Restore...
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • Broken Screen and Phone Disabled

    I have dropped my phone and broken the screen and now the phone is disabled... I have tried to restore via iTunes with no success. Will Apple swap my phone for a new handset if I pay a fee even if I don't have Apple Care?

    Yes.
    https://www.apple.com/support/iphone/repair/screen-damage/

  • TS2755 phone sending blank messages randomly, i did not compose

    last week i sent a text to a contact and since sending it, every day at least once or twice, my log shows i sent a message to that same contact, but there is no message in it, and the really weird part is that I have not composed a message to this contact since the original text a week ago.
    I spoke to the person and they had not received any messages from my phone, blank or otherwise since last week either.
    Any idea of why or how this could happen? is it possible for the phone to generate and send a message arbitrarily?
    if not what are other causes or possibilities?
    thanks

    How else? HTH should I know. You're the one that said "my log shows i sent a message"...  No idea what "log" you're looking at. You want to cop an attitude... fine. Figure it out yourself.

Maybe you are looking for

  • Adobe Flash Player, version 10.1.102.64 installed, but I cannot access FP dependent applications

    Adobe Flash Player, version 10.1.102.64 is installed, but I cannot access FP dependent applications (such as those on Facebook.) I used the link you previously  provided  http://www.adobe.com/products/flashplayer/fp_distribution3.html to  download th

  • Lumia 820 Photo Resolution Problem

    Hi, Can anyone help me solve why i cannot change the photo resolution on my Lumia 820? When i check them on a PC they always come out at either 800x600 on 4:3 ratio or 800x450 on 16:9 ratio. It's driving me mad there is no option in the photo setting

  • Paying excess payment recieved to the customer.

    Dear SAP gurus, In this scenario, my client bills their customer on a regular basis. sometimes, the client receives excess payment from the customer.. now, they want to refund the excess payment to the customer. pls guide how to map this in SAP? Rega

  • Security and access levels

    I have created 4 users access levels, however, when I try to implement, when I keep inheritence, default security keeps coming up,   e.g. try changing everyone to my new access level and I get the new access level, but I also get view (inherited) - h

  • BAPI or FM to create PIR(Purchasing Info Record)

    Hi all, Is anyone aware of any BAPI or Function module which i can use to create Purchasing Infor Records. Or else using BDC is the only