TS2755 Remove yourself from specific group message, not all group messages?

How do you block or stop receiving a group message from a specific thread of people, without disabling all group messaging?  I got put on a thread of 10 people and can't stop receiving all the messages.  I'd still like to keep group messaging enabled though as there are other group messages I use. 
Thanks

As a recipient in the thread, you have no control about receiving messages. The person that starts the thread is the only one in control, as they add people to the post. You need to ask all of the people in the thread to delete the thread and use a different one, and ask the starter not to add you to a group message.

Similar Messages

  • HT5760 You need to make the function available to remove yourself from iMessage groups.

    It's so annoying you can't remove yourself from iMessage groups, is this something you will ever allow?

    WE don't have to do anything.
    WE are users.
    WE are NOT Apple.

  • How am I able to add and remove people from a group message?

    How am I able to add and remove people from a group message?

    You'd need to start a new thread.

  • Can I remotely remove Apps from my iphone when not connected to iTunes. I have my apple ID and password. but my iphone is not in same wifi range

    Can I remotely remove Apps from my iphone when not connected to iTunes. I have my apple ID and password. but my iphone is not in same wifi range

    Sorry, not sure what you mean by remotely?
    You can remove apps from your phone without being connected to anything if you have the phone in hand. Were you speaking about something else?
    If not, then you just press on an app on the Home screen and hold it down until they all begin to wiggle. Apps that you can remove (non-Apple apps) have a little "x" in the top left-hand corner. Tap on that, and the app will be removed.
    Cheers,
    GB

  • Removed myself from users group

    Yesterday, I was trying to setup a mail server following this: http://www.howtoforge.com/arch-linux-ma … nd-dovecot and I accidentally removed myself from users group
    [yasar@yasar-laptop ~]$ id
    uid=1000(yasar) gid=12(mail) gruplar=12(mail)
    Now, I am thinking to issue this command:
    usermod -g users -G audio,lp,optical,storage,video,wheel,power yasar
    Is this command good? I just wanted to be sure. I don't want to break stuff again.

    Just run this command as root:
    gpasswd -a yasar users
    Last edited by anonymous_user (2012-01-12 16:40:45)

  • Can I remotely remove Apps from my iphone when not connected to iTunes

    Can I remotely remove Apps from my iphone when not connected to iTunes. I have my apple ID and password. but my iphone is not in same wifi range

    Tap & hold an app icon until they wiggle then tap the X on the app you want to delete.

  • Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

    Hi
    I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
    The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
    This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
    What can I do?
    thank you a lot.

    There is no product called Adobe Acrobat Reader Pro. There is
    - Adobe Acrobat Pro ($$)
    - Adobe Reader (free)
    Which do you have? And are you a programmer?

  • How do i move music from iphone to pc - not all downloaded from itunes store?

    how do i move music from iphone to pc - not all downloaded from itunes store?

    iTunes includes an option to transfer content that was purchased from the iTunes Store from an iPod or iPhone, but this is for content that was purchased from the iTunes Store only.
    With your iPhone connected and without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone.
    This is one of the reasons why maintaining a backup of all your important data (including your iTunes library) stored on an external drive used for backup purposes only, or on other media such as CD or DVD is so important.

  • Remove user from multiple groups

    Hello everyone, first time posting here with a question and I apologize if I'm asking in the wrong location.
    To give an idea of what I'm attempting to do, I've recently been developing a vbscript that will take a nightly csv export from my student information system and either create or deactivate student accounts based upon their enrollment status.  I have
    this function working great now, another function I've been developing is to have accounts moved between OU's based upon the school building code assigned to students which I have working as well.  The problem I'm running into right now is having students
    removed from existing active directory groups when they move between OU's.  Essentially what I would like to do is have the script load the users group membership into an array and then remove any groups that end with STUDENTS, below is the code I have
    been working on to accomplish this but have literally hit a brick wall.  If it helps all my student groups for each location runs in this fashion.
    ABCD_STUDENTS
    ABCE_STUDENTS
    Any suggestions would be greatly appreciated.
    ' Student changing OU then we need to update their account to reflect appropriate group memberships.
    Set UserObj = GetObject("WinNT://server.domain.net/" & ADusrname) 'This must be hardcoded to domain controller
    strUserDN = DN
    strUserCN = objuser.cn
    'Add user to the school group if not correct
    Set objGroup = GetObject(varSchoolGroup)
    strUserDN = DN ' Bind to the user object.
    strGroupDN = varSchoolGroup ' Specify group Distinguished Name and check for membership.
    Set objADObject = GetObject("LDAP://"& strUserDN)
    objmemberOf = objadobject.GetEx("memberOf")
    If Not (funIsMember (GetObject("LDAP://" & strUserDN),varSchoolGroup)) Then
    objmemberOf = objadobject.GetEx("memberOf")
    For Each objGroup in objmemberOf
    Set objGroupDelete = GetObject ("LDAP://" & objGroup)
    If Mid(objgroup,7,8) = "STUDENTS" Then
    msgbox "test remove"
    objGroupDelete.PutEx ADS_PROPERTY_DELETE,"member",Array(strUserDN)
    objGroupDelete.setinfo
    subUpdateLogFile studentcounter & " - Removed from student group " & objgroup,student_guid,student_username,student_fullname,"removed group"
    End If
    Next
    'Add user to school group
    Set objGroup = GetObject(varSchoolGroup)
    objGroup.PutEx ADS_PROPERTY_APPEND, "member", Array(struserdn)
    objGroup.SetInfo
    subUpdateLogFile studentcounter & " - Updated school group to " & student_schoolgroup_ldap,student_guid,student_username,student_fullname,"school group"
    objUser.SetInfo
    updated = "yes"
    End If
    Any suggestions would be greatly appreciated.

    With Bill.  This can be done with AD and PowerShell in a couple of lines for reach item.
    You are taking an incorrect approach which is making this much harder than it needs to be.  Your question is also hard to understand.
    Each AD usre object obtained via ADSI will have a list of groups the account is a member of.  You use this to remove the user from the group.  How you choose this is up to you.  You can use an array or a file.  You can also =just use
    OU associated groups.  A user then is added to all or some groups associated with the OU and removed from the groups associated with the OU by just returning the OU associated group list from the OUs.
    Designing AD systems is a specialty.  Once you fully understand the features and capabilities of AD these things are usually simple and painless.  If the design is not done well they are painful and faulty.
    We can answer specific questions.  Understaning the design and capabilities of AD is mostly up to you.
    Start with a tool that is designed to work well with AD like PowerShell. VBScritp is onluy useful to those who are skilled with AD and scripting in VBSdcript.  From your script we can see you are a beginner at both.  As Bill notes...do yourself
    a favor and switch to PowerShell.
    ¯\_(ツ)_/¯

  • My wife's Apple ID is shown as belonging to a family sharing group, but we can't determine what is the id of the owner.  How can she remove herself from the group?

    my wife's apple ID is shown as belonging to another family sharing group. We can' t figure out the  Apple ID of the 'owner' of the group.  Is there any way to remove oneself from a family sharing group when you are not the owner?  Or how can we find the log in id (Apple ID) of the owner?

    i partially solved the problem, however still need some help.  My wife has made purchases under two different Apple ids.  I tried t re-set her iPad with her main ID but it is apparently part of a family.  I re-set  her iPad iCloud using her secondary ID.  The sharing of iTunes shows her main apple ID.  The settings iTunes is also set to her main Apple id.  I sent an invite from her iPad icloud family sharing to her main Apple ID, but when I attempted to consent to join it says she is already a member.  So I am guessing this is because in the family set up under her secondary ID that her main id is the iTunes account that is shared.  My question is could I change the iTunes shared under her name as owner to her secondary account, then invite her main account to join as a distinct member?  I am nervous about doing this for two reasons 1.  There is a warning when changing the shared iTunes account that says you can't join another group for 90 days. 2. I may still get the message that her main account is still a member of the group even though it doesn't show up, and then not able to revert back.
    if you follow this can someone offer some help,
    thanks
    note. This whole problem when we had to change a Apple id when we changed Internet service providers.

  • Unable to remove user from SharePoint Group using PowerShell

    I am trying to remove a user from a SharePoint Group using PowerShell.
    I can see the user in the Site Collection as part of the SharePoint Group, however, when I attempt to run the script, I get an error message stating "Can not find the user with ID: 10"
    Below is the PowerShell script that I am using:
    $url = "https://sharepointdev.spfarm.spcorp.com/sites/desitecoll"
    $userName = "spfarm\sp2013_svc"
    #$userName = "spfarm\spprofileimport";
    $site = New-Object Microsoft.SharePoint.SPSite($url)
    $web = $site.OpenWeb()
    $siteGroups = $web.SiteGroups;
    Clear-Host
    $mySiteGroups = @();
    foreach($group in $siteGroups)
    Write-Host $group
    $mySiteGroups += $group;
    }#foreach
    $members = $web.SiteGroups[$mySiteGroups[0]];
    $owners = $web.SiteGroups[$mySiteGroups[1]];
    $visitors = $web.SiteGroups[$mySiteGroups[2]];
    #Remove the user from the specified SharePoint Group
    $spUser = Get-SPUser -Identity $userName -Web $url
    Write-Host $spUser.ID
    Remove-SPUser -Identity $spUser -Web $url -Group $owners
    $web.Update();
    $web.Dispose();
    Write-Host "User " $userName "removed from " $owners
    Please advise.

    I had to update the code to the following because Get-SPUser was not working properly:
    $url = "https://sharepointdev.spfarm.spcorp.com/sites/desitecoll"
    $userName = "spfarm\spprofileimport";
    $site = New-Object Microsoft.SharePoint.SPSite($url)
    $web = $site.OpenWeb()
    $siteGroups = $web.Groups;
    Clear-Host
    $mySiteGroups = @();
    foreach($group in $siteGroups)
    Write-Host $group
    $mySiteGroups += $group;
    }#foreach
    $members = $web.Groups[$mySiteGroups[0]];
    $owners = $web.Groups[$mySiteGroups[1]];
    $visitors = $web.Groups[$mySiteGroups[2]];
    #Convert the user name to an SPUser account
    $spUser = $web.Site.RootWeb.EnsureUser($userName);
    Write-Host $spUser.ID
    Remove-SPUser -Identity $spUser -Web $url -Group $owners
    $web.Update();
    $web.Dispose();
    Write-Host "User " $userName "removed from " $owners
    Was I not using Get-SPUser correctly?

  • How to tell if someone removed you from a group co...

    I'm new to skype so I apologize if this is a dumb question! When I go to "participants" it doesn't show I'm there, and the group hasn't been active in 3 days, which is odd since they are usually very active. Does it say you have been removed from the group or anything like that when the admin removes you? How can you tell if someone removes you? Thanks

    If your plugin is doing the exporting, just record which collections are in active sources upon export.
    PS - I'm not aware of any problems with catalog:getActiveSources(), other than differences in what's returned for the special collections (e.g. all-photos and recent-imports collections) vs. non-special collections.
    Of course you can't add photos to smart collections, so if collection is smart, consider an option for tagging in such a way that it will be auto-added (food for thought anyway, maybe doesn't apply...).
    Rob

  • Remove Attachments from Leopard Mail does not remove attachment from .emix

    Every day I back up my mail (and other items) to an external hard drive using an Automator workflow, in order that I can synchronize mail on my work and home Macs. In order to make this process as quick as possible, I routinely remove attachments from all mail messages once I have saved them to where they need to go on my hard drive.
    I have noticed that since upgrading to Leopard (archive and install), the size of the mail folder which I back up (user>library>mail) is getting significantly bigger every day, despite removing all attachments. Upon investigation it seems that although the attachment has been removed from the mail message, the attachment is still in it's associated .emix file (e.g. user>library>mail>POP???mailaccountfolder>INBOX.mbox>messages>?????.emix - if this email contained a 5mb attachment which was removed using mail>message>remove attachments, the .emix file will still be 5mb).
    Anyone else experiencing this problem? know a workaround? It didn't happen with mail in 10.4!

    I am not sure when I will get the chance to test this -- maybe this afternoon. But I had not understood that what you called original continued to have the attachments. If so, this strongly suggests to me that it indeed may be the way Gmail maintains the All Mail folder that is causing this. See:
    http://mail.google.com/support/bin/answer.py?hl=en&answer=6581
    If there is a setting to help this, it will have to be one that is selected in the Settings webpage of Gmail, I suspect.
    Ernie

  • Remove contact from Smart Group???

    How do I remove cards from a Smart Group without totally deleting them from the address book?
    Here's my situation: I've got all my media contacts in a smart group by adding "media" to notes; but now I've also got several contact cards in the group that have the word media in their address, but who aren't media-related (i.e. [email protected]) or who have "mediator" elsewhere in their card.
    I don't want to have to cull out 20 -25 addresses everytime I mail to this group.
    thanks

    You should be able to select them and drag them to the group you want them in; for example, from "Smart Group" to another group name you have or create.
    Mulder
    If my answer helped solve your problem, please consider awarding some points. Why Reward Points?

  • I lived in the uk for some time and set up my itunes while I was there. Upon moving bnack I managed to get all my music back however after my mot recent iphone update, I lost some of my songs from the uk. Not all of them. HELP!

    I lived in the uk and have now lost some of the music I purchased there. Not all of the music. I still have reciept numbers. Can I get it back?

    try changing your appleID to whatever you were using when you were acessing the UK store.  Then try to re-download the purchased music.  I am not sure if re-downloading music works from the UK store, however.  It might be US only.  If this is the case, you will need to contact iTunes support.

Maybe you are looking for