TS2755 Since the update, I cannot send imessages
Sending imessages just hang, receiving imessages is spotty. regular messaging works fine.
Settings > Messages > iMessages > Off > On
Similar Messages
-
I have an iPad2 and recently updated the ios. Since the update, I cannot connect to wi-fi through my router. I can still connect at work, but at home it will just not work. I have tried everything I can think of. I have reset, uninstalled, re-installed, and changed routers. 3 times. I cannot get it to work. Does this have something to do with the update? I have even reset the network settings, and restored the ipad itself to factory default settings. Can anyone help me?
Try and "Forget This Network"
Settings>Wi-Fi>tap little arrow on right of network.
http://i1224.photobucket.com/albums/ee374/Diavonex/ea2bf71cacb51e31d8a771a9f29d7 486.jpg -
Since the update, I cannot open my contacts on my iPad2. Help!
Since the update the other day, I cannot open my contacts on my iPad2. My iPhone is ok so far. I'm not sure about what to do to get it open. Any help would be much appreciated.
I tried that too and it didn't work. I can open Contacts but when I click on a name, nothing happens. The right side has three options, Create new contact, Add to Existing Contact and Share contact. If I click on add to existing contacts, a list comes up but when you click on a name, Contacts closes. If I click on create new contact, a box opens to set it up but it is small and doesn't look like the usual page to fill out for a new contact. This is so strange. My contacts are intact on the cloud and my iPhone but not on the iPad. Also, why do I lose some but not all phone numbers?
-
Since downloading iOS6 I cannot send iMessages
Since I have downloaded the new iso6, my iPad will not send iMessages. It also does not immediately receive iMessages from others. I receive them from others hours after they are sent.
ios6 changed the way imessages are routed. do you have a mac running mountain lion/messages on your mac?
do you have an iphone?
Thanks.
--Sam
P.S If mac, post OS version. It changed it so your phone number was the identifier. -
Please help! I upgraded to ios 6 today and I cannot find out where to disbale the location for the camera. I DO NOT want my pictures to be geotagged or have any type of location marked on them for safety reasons. Does anyone know how to disable it? Please help and thank you!
Bro try Setting then scrool down choose privacy then you find location service there you can turn off location service for camera. Gbu
-
Since the update, I cannot use Itunes store on my phone.
When I open the itunes store app, the screens have the header and footer but anything I do does not work. It has a blank screen. Any suggestions?
Hi dsbrew1,
First, try signing out of your account in Settings > iTunes & App Store. Once signed out, force close the iTunes Store application and restart your device. After you have restarted, go ahead and sign back in.
If the above did not resolve your issue, refer to the following:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
If you haven't been able to connect to the iTunes Store:
- Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
- Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
- Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet.
- Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
- Try resetting (turning off and then on again) your Wi-Fi router
- If the issue still persists see, iOS: Troubleshooting Wi-Fi networks and connectionsoriOS: Troubleshooting Wi-Fi networks and connections.
Thanks,
Matt M. -
Since the update, I cannot delete album artwork!
How do I delete album art off of my Itunes ablums. It's for a Sony Vaio using windows 7.
The new iTunes 12 Get Info dialog lacks right-click context menus (at least for now) but it still accepts most standard keyboard shortcuts and drag & drop actions.
Delete Artwork
On the artwork tab of Get Into, tap the image in question, use Backspace or Ctrl+X. Delete doesn't work.
Or, tap the image at the top left of Get Info, this time use Backspace or Delete, it is Ctrl+X that doesn't work.
Add Artwork
Select artwork, press Ctrl+C to copy, tap the centre of the Artwork tab, press Ctrl+V to paste.
Or, select artwork, press Ctrl+C to copy, tap the small image area at the top left, press Ctrl+V to paste.
Or, you can drag & drop to, or sometimes from, the same locations.
You can also copy artwork from the Get Info dialog to Windows Explorer with the keyboard shortcuts.
If the source image is on a web page right-click and use Copy Image rather than copy. (With Chrome I get a one pixel wraparound so tend to go for a temporary local copy anyway - not sure whose bug this is, but it isn't new.)
If you have multiple images embedded drag the one you want to be the primary artwork to the leftmost position.
Replace/Remove All Artwork
The top left image box can be used to add or delete art from multiple tracks. In either case all existing artwork in all tracks is replaced/removed.
Old Style Get Info Dialog
Select some items, right-click, hold down shift, then click Get Info from the context menu. (Use alt/option on a Mac)
tt2 -
with the new version of firefox, my printer does not work--and yes, it does work with everything else.
See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages -
Since the update i cannot print from online qickbooks how do i fix this
I can go to internet explorer and print from online quickbooks
Can you try to start Firefox in Safe Mode to see if Firefox works properly with no error? You can start Firefox in Safe Mode below:
*'''Windows/Mac''': Go to Help > Restart with add-ons disabled
*'''Linux''': Run ''firefox -safe-mode'' in the Terminal/Konsole
If Firefox opens up fine with no problems, it's probably one of your extensions that's causing the issue. You can re-enable your add-ons one by one until you find the one that causes the issue upon being re-enabled.
---- -
Since the latest update I cannot send photos Actual size or large. Medium size is as large as they go. I select Large and Actual, but to no avail. I was always able to do this before the update. iphoto 9. and I am up to date on everything. Any ideas?.
Are you also setting the file size in the New Message Window in Mail?
-
I bought an HTC one 2/28/14. I had no trouble sending or receiving pictures with my texts. I had to update my phone 6/5/14 and since that time I cannot send or receive pictures in my texts. How can I fix that?
The thing is, before the update, I ALWAYS had my wifi on, and I had my mobile data off. Worked flawlessly until the update.
Verizon Wireless Customer Support <[email protected]> wrote:
Verizon Wireless Customer Support created the discussion
"I bought an HTC one 2/28/14. I had no trouble sending or receiving pictures with my texts. I had to update my phone 6/5/14 and since that time I cannot send or receive pictures in my texts. How can I fix that?"
To view the discussion, visit: https://community.verizonwireless.com/message/1098171#1098171
> -
It seems I cannot send imessage from the ipad when the mac is turned off! I have recently upgraded the mac to 10.8.4.
Many thanks in advance for your help.Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
I updated to 5.0 today.
Now, when I try to email from my phone, I am block, thwarted, rejected by the following message:
Cannot Send Mail
A copy has been placed in your Out Box. The recipient (enter email here) was rejected by the server.
This happens with my business address. Receiving works.... sending doesn't.
My SBC Global address on this same phone is fine...receiving and sending.
What to do? I'm stressed.
RayHi,
I had the same issue on my iPhone 5S. My internet/email provider told me to uncheck (turn off) USE SSL under Mail settings, and it worked perfectly for me. -
Hello everyone,
I just updated my 3GS from iOS 5.0.0 to 5.0.1
Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.You do not need to keep posting the same thing over and over again.
Look to the right side of this page at "more Like this" or do a forum search. -
Help. I recently downloaded the latest software update for on my Apple TV (per the prompt Apple TV gave us). Ever since downloading the update, we cannot access movies, play movies, or access iTune store. We can play YouTube videos so the problem is not related to the connection. It happens only when we are trying to access Movies. Very confused. Our AppleTV was working fine until I did the new software update. Now this problem! Help!
re-add the shared lib
check the firewall on the computer
Maybe you are looking for
-
Copy and Paste from Word document to Role comment creates an error
I am receiving calls from access request creator saying they are getting error message when they copy and paste text from MS Word to role comment box. If they use the notepad they don't have any issues at all. Error: "The ASSERT condition was violate
-
Whether OBIEE 11g provide SDK like other BI like SAP BO? If yes, Any examples/ functionalities available anywhere?
-
Dear All Is there any transaction/field to record cheque handover or delivery date to vendors. i need it to know the correct value date for the purpose of cash management. thanks S AP
-
Is there a way to blacklist a number?
I can't seem to find a way to do it on my C3: is there a way to block specific numbers from calling mine? If the C3 doesn't provide this particular option, is there a JAVA app available for the S40 operating system to achieve this? Thanks! PS I remem
-
How to consume HANA xsodata into Netweaver gateway as odata
Hello all, I am trying to consume XSODATA from HANA system into Netweaver gateway system using OSCI method.But I am getting error ' error while fetching the source metadata'.Kindly let me know where am going wrong. Regards, Imra