TS2755 The screen view for Messages will not re-orient to landscape on my new iPhone5. Should it?
Just got the new iPhone5 and notice that the screen does not re-orient to landscape view when using Messages. I had thought this was happening originally but that the feature had fallen off. Is there a setting I am missing? Or is this an application that does not re-orient in this way?
This is a user-to-user support forum so you may want to submit feedback to Apple at https://www.apple.com/feedback/iphone.html
Also, if Verizon is charging you for Premium Visual Voice Mail (which according to their website is currently the only one that offers voice to text) you should contact them for a refund as the "Check Device Compatibility" link at their http://www.verizonwireless.com/wcms/consumer/products/visual-voicemail.html shows that only 16 phones are supported and the iPhone is not one of them.
If you decide to switch phones, you may also want to consider that feature from Verizon only transcribes the first 45 seconds of a voicemail.
Similar Messages
-
My iPhone is not receiving mail but the following messages continue to flash over and over at the bottom of the screen: "Checking for messages, Updated just now, Checking for messages", etc. After a minute or so it will flash downloading 1 - 32 messages but nothing is received and then the "Checking for Messages," etc. starts back again. I turned the phone off for 30+ minutes and also tried to reset it, but the problem continues. Any ideas on how to solve the problem?
Double click the home button and swipe up the messages app to stop it, then open the app again. This pretty much completely stops the process and freshly opens it again, resolving problems at times. I have had this happen before as well on my iPad, I get a banner, check messages, and nothing new is there.
If that doesn't work, close the app like suggested above, but then restart the phone by holding down the home and lock button for 10-15 seconds until the apple logo appears. -
Forgot the passcode to my ipad. When I went to restore it, it asked me if I wanted to update the software so I said yes. It then went into recovery mode, I'm guessing, with the connect to iTunes showing on the screen. Now iTunes will not recognize it so I have no idea how to get it back! Help!!
Then you will need to try restoring it once more:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I recently changed my Apple ID but it did not transfer over to my iCloud account. How do I change my iCloud ID? The password for the new Apple ID does not work since the iCloud default user name is imbedded in the login box. The login popup for iCloud will not go away so I cannot get into my iPad since it pops up as soon as I turn the device on and re-occurs every few seconds.
You have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPad on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iPad when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
I choose Adobe Reader XI to open a GPX file. It will not open it how do I get past the screen that says it will not open it to choose something else?
http://windows.microsoft.com/en-us/windows/change-file-open-program#1TC=windows-7
or
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7 -
After unplugging my phone from being charged all night, the screen went black and will not let me do anything including turning it off. please Advise. Thanks
press and hold the home and power buttons until the Apple icon is displayed, then let go.
-
TS2755 the pic butten on messages is not working. can not send or recieve photos. please help.
the pic butten on messages is not working. can not send or recieve photos. please help.
Hi Beharley,
try resetting your network settings: Settings - General - Reset - Reset Network Settings. This works fine if something is messed up with your carrier bundle.
Regards, Peter -
The latest itunes for windows will not install
I have an old PC running windows and I want to transfer my itunes songs to my ipad. I can't do this until I update iTunes but trying to update does nothing, either from iTunes or from the web page. I've tried rebooting the PC, still doesn't work. How do I get iTunes to update? Or, how do I transfer to the iPad without updating? The version of iTunes I have is older than 10.5, not sure where to find version #. Thanks!
Hi b noir, thanks for offering to help. i documented the whole process:
Itunes transfer from pc to ipad.
1. Connect ipad to PC
2. Pc recognizes ipad as a camera, gives me list of programs to launch, not sure if this has any relevance, no itunes on list, instead its kodak easyshare, ms doc wizard, ms camera sharing, ms word,mp navagator ex, omnipage, photoshop - I ignore this screen
3. Launch itunes, get screen, "ipad requires v 10.5 or later' go to itunes.com. I click ok
4. I get screen, still in itunes, "a new version (10.7) is available." I click download.
5. That screen goes away but nothing happens. No download starts.
6. Checked itunes folder on my hard drive, no sign that anything new has downloaded
7. Launch safari, go to itunes.com, hit download button
8. Nothing seems to be happening.
9. I get "thank you for downloading itunes" screen.
10. Still nothing new in itunes folder.
11. Get AVG screen telling me to restart my pc to finish download process.
12. During shutdown, I get screen,"the instruction at 0x100066dd referenced memory at 0x100066dd. The instruction could not be read." Gave me options to terminate program or debug. I did not choose either. No idea if this is relevant.
13. PC rebooted anyway.
14. Launched itunes
15. Got same message as before - "ipad requires v 10.5 or later' go to itunes.com. I click ok
16. Even though ipad is plugged in all this time, the screen that thinks the ipad is a camera does not come up this time.
17. There is nothing to the left of the itunes interface that lists devices - this is where ipad would appear, right?
18. Ipad appears on My Computer control panel
19. My version of itunes is 10.3.1.55
20. In itunes, i go to Help - Run Diagnostics - run all but Cd/Dvdtest
21. Secure Link to Itunes store failed, everything before that is ok. I click Help. nothing happens. Store appears in itunes so I don't see why this would fail.
22. Since help doesn't work, I move on in test. Two more fail screens: itunes helper not running, no ipad found. help brings up appropriate pages for both. Both recommend removing and reinstalling itunes.
23. Device sync also fails.
If it would be quickest to delete and reinstall itunes, I am willing to do that. My music would not be deleted correct? What about playlists (not as important to me).
I also have all my music backed up to CD. It would be tedious to copy that all to ipad, but if there is a way to do it and no other option, I could do that.
Sally -
Netflix will not work on my HD Tv with the New IOS7. All other and movies clips work fine. The netflix screen says you need to disable mirroring to play. It plays on the ipad but just the Netflix screen on the tv. Any suggestions?
Hi Everyone,
hope this message finds you all in time. The recent Apple TV update 5.1 is terrible. Apple knows it is which is why (thankfully for some relentless user -I have no idea who but I believe it was under threat) they have allowed to sign 5.0.2 again which means you can downgrade your Apple TV 2 and 3 to a 5.0.2 version via iTunes. Who knows how long they will keep the window open but I have downgraded my ATV early this morning. I couldn't post this earlier because I was out all day but I am doing it now.
Here's how to do it:
1) Connect your ATV to your computer via a Mini USB (not included with ATV but included with many other electronic devices) - in order for your ATV to appear in iTunes you must FIRST plug the USB cable to your computer and ATV and only THEN plug the power cable.
2) Download your ipsw restore file from Apple.
5.0.2 (ATV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
5.0.2 (ATV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
3) In iTunes select yout ATV, hold SHIFT and click on Restore
4) Find and choose the downloaded IPSW file in the Open Dialog Box and hit Next
5) As long as Apple still signs that version the Restore process will begin and will take a few minutes to complete.
Enjoy!
raadore -
I'm trying to find out why the latest ITunes update will not update completely on my computer. It goes so far and then it stops with an error message saying to try installing it manually. I don't know how to do this. All other updates have been ok. This one is 11.1.
Thank you for your help.
FrogladyfordDownload iTunes 11.1.4 from here - http://www.apple.com/itunes/download/
Hope that helps. -
The Web Agent for IIS will not work
Environment: NT4 Server, IIS4
I try to install the Web Agent in use with IIS but IIS fails to load the dll. After the installation I can read the event-log :
The HTTP server was unable to load the ISAPI Application 'C:\Oracle\Ora81\ord\web\bin\wsciis81.dll'. The data is the error.
And the Browser gives me:
A dynamic link library (DLL) initialization routine failed.
What can be wrong?Note: On Windows NT, use \ instead of / to separate file system directory
paths.
1. Check the Web Agent's log file.
Look in <oracle_home>/ord/web/logs for a log file in the form
wsc_<yyyymmdd>_<pid>.log. If the file exists, review it for errors,
then take the necessary action to remedy the problem. Possible
problems that might be logged are non-recoverable errors in the Web
Agent's configuration file <oracle_home>/ord/web/admin/wsc.cfg. If the
configuration file or the <oracle_home>/ord/web directory hierarchy
doesn't exist, then re-do the installation.
2. Check the Web Agent's "last-chance" error log file.
If the <oracle_home>/ord/web/logs directory exists, but there are no
log files, check in the %SystemRoot% directory on Windows NT or the
/tmp directory on Unix for a file named wsclstch.err. This is the Web
Agent's "last-chance" error log file. The Web Agent will try to write
to this file if it encounters a fundamental startup error, such as a
problem initializing CORE or NLS, creating a log file, or opening its
message file. If the file exists, review it for errors, then take the
necessary action to remedy the problem. (In a command window on
Windows NT, type set SystemRoot to find where the wsclstch.err file
would be written.)
3. Check the web server configuration.
If the Web Agent failed to create either its normal log file or its
"last-chance" error log file, verify that the Web Agent has been
configured correctly for the particular web server being used and that
the web server is running.
o Microsoft IIS
Use the Internet Service Manager to verify that IIS has been
configured correctly for the Web Agent. Review the installation
and configuration instructions in the wsciis.html or wsciis.txt
files to verify that the Web Agent has been configured correctly
and to make any changes or fixes necessary. Check that the filter
is up and running and that the virtual path has been configured.
To check the filter, select the web site, then click the
properties button (or right-click the web site icon). Select the
Filters tab. The Web Agent should appear in the list with a green
up-arrow. If it appears with a red down-arrow, check the Windows
NT event log for any errors relating to the Web Agent. IIS
doesn't always write detailed error messages. For example, if a
DLL used by the Web Agent can't be located, then IIS typically
logs the fact that a load error occurred along with the message
"the data was the error". Note that the installation and
configuration instructions describe the case where the filter
must be installed manually if there were no existing filters
registered at the time the Web Agent for IIS was installed.
If the filter looks OK, check the oracle_intermedia_bin virtual
path by clicking the properties button (or right-click the
virtual path icon). The path should reference the
<oracle-home>\ord\web\bin directory, which should contain the
wsciis81.dll file. In the properties window, select the directory
security tab, then click the anonymous access and authentication
control button. Verify that Basic authentication has been checked
and that Windows NT challenge/response has been cleared.
To function correctly, the Oracle8i home must be specified
correctly for IIS. Use the Oracle Home Selector to verify that
the Oracle8i home is specified as the default home. Use the
System Control Panel to verify that the Oracle8i home /bin
directory is specified prior to any other Oracle homes in the
PATH environment variable.
null -
How can I reboot my Touch when the screen is frozen and I cannot use the "slide to power off" feature?
Next try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I recently just dropped my iPhone 5c, the screen is blank and it will not turn on (pitch black until i press lock button then it turns a little blue). siri works if i hold down the button but the screen is still pitch black. the screen is also completely popped out. What should i do? what do you think apple will do?
take it to Apple and have the screen replaced.
-
I can not turn my nano 6th generation ipod on... the screen is black and will not do anything.
Please help! The have had the nano on charge for a day, and it will not turn on.
I plug it in to iTunes, and iTunes does recognize it........... and says it is syncing.. and says when it is done... but, I can not do a thing with the nano ... I try the reset thing... holding the Volume down and the sleep/wake button...at the same time... and hold for 8 seconds... and nothing!I am currently having this same problem. This nano lasted me less than 2 years.
-
The "show" bar for homeshare will not appear
My Homeshare is all connected and I have access to my other itunes library, but the "show" bar at the bottom will not appear. I cannot transfer the music over, not even manually. I updated my Itunes to the newest version
Doublechecking ... do you still get that if you update to iTunes 10.6.3.25 (just released today)?
http://www.apple.com/itunes/download/
Maybe you are looking for
-
I'm able to use the new one even tho the old one is there? But can't delete the old one because it's frayed out n can't tap on it to change it to the new one
-
Account modification key for movement type 643
Hello Experts, I am reaching out to you today as I am in need of some info on Account assignment for Goods issue process. I looked at transaction OMWN or OMJJ for movement type based settings. I am running a business process ' Intercompany stock tran
-
Large Jars -Slow loading of Applets
I have a large jar file as a result of which My Applet takes a long time to load in the browser .Any suggestions to rectify this problem . GUI is primarily Swing and Browser- Netscape
-
EMac/iMac tiger installation dvd
Can the Tiger DVD installation discs of an iMac or eMac be able to be installed on a G4 Powermac running Panther, please? Thanks in advance G4 Silver Mac OS X (10.3) Dual OS9 & OSX
-
Import format and/or digital copy protection issues
I'm new to the iTunes thing recently purchasing two 3gs iPhones. I have several hundred CD's ripped to FLAC format on a NAS device. When I add the networked folder to my iTunes it seems to read the directory and then add nothing to the library. I hav