TS2755 Why can't I send messages to someone who does not have an apple product from my new Ipad2?
I just got an Ipad2 and can not figure out why I can't send a message to someone who does not have an apple product. I can from my iPhone. When I enter there name it is shown in red with an ! Behind it and the word send does not light up.
You can text this person from your iPhone because you are using SMS over the voice cell network. There is no access to the voice cell network on the iPad, even if you have the WiFi+3G model.
There are some apps, such as TextFree, that will let you do this.
Similar Messages
-
Can I send a numbers doc to someone who does not have numbers
can I send a numbers doc to someone who only has Excel or anyone who does not have numbers?
You can email the document but it is not likely they will be able to open it. There are export options from Numbers:
CSV, PDF and Excel:
I hope this helps -
Why can't I send messages to my contacts from my ipad
Why can't I send messages to my contacts on my iPad?
WEll, I send messages to everyone on my iphone, just cant get certain ones on the ipad. Only 4 or 5 people so far can get my messages and respond on ipad. All the people have iphones and I use facetime to talk to them, but no imessages.....frustrating. I have read all the articles and tried my best. I might go straight to the apple store locally, and see if they can help me.
-
Why can't I send messages to my friends that have the same thing as me? t
Why can't I send messages to my friends that have the same thing as me? They can send to me. It says that they aren't registered and they are though.
What phone do you have? And how, exactly, are you trying to send pictures to Facebook? It sounds like you need to log into Facebook on the phone or re-enter your username and password for Facebook. Somehow the connection between your photos and Facebook has been lost, and you need to get them connected again (verify your login information)
-
Why can't I send messages from ipad. I can read incoming text messaging but cannot reply from ipad.
I Followed the instructions to correct the problem of my iPad not sending but receiving iMessages. It did not work.
-
Why can't I text friends who don't have an apple product?
Why can't I text friends who don't have an apple product?
The iPad cannot send traditional text messages (SMS) which are platform independent since they are a carrier service.
The iPad uses Apple's own messaging service iMessage to send messages. Which means only Apple devices can receive those.
If you need to message people on other platforms you need a different messaging App liike Skype or Google Hangouts. Note, that these will not be SMS messages like your phone can send. They'll be internet based messages so the other user will have to be registered with the service you choose to use, and you will have to have him as a contact in that service to be able to send them a message. -
I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel."
How do I fix this?Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Sending a message to someone who used to have an iPhone
I have sent some messages to someone who used to have an iPhone (and to whom I used to send iMessages) but who has now switched to an android device but the contact number has stayed the same. I notice that when I send a text now it is going as an iMessage (message in blue). I assume that the recipient is not receiving these. Is that correct? How do I send the contact a regular text message at this point?
DKMac wrote:
Is that correct?
yes
How do I send the contact a regular text message at this point?
You tell them to sign out of iMessage -
How do I send files from my IMAC via bluetooth to my new Ipad? They will not "pair" but they are connected and discoverable. I send a file from Imac snow leopard OS X 10.6 to the ipadusing bluetooth, but the failure message says the ipad does not have the necessary services. What are these? Do I neeed to have iphoto and ms word to send pix and .doc files?
File Sharing over Bluetooth is not a feature of iOS devices. iOS does not include the required Bluetooth profiles to allow this. You cannot add this feature, so you may as well stop trying.
-
I have an Apple Configurator install that wont recognize an iPad when I attach it via USB. I cant prepare it or refresh it. It was supervised. I get an error message that says "policy does not have correct profile data". At some point there was a mismatch between the profile on the iPad and the MAC server. The profile on the MAC server has been deleted and the iPad has been erased and reset to default. I need to be able to get Configurator to recognize this device to prepare it for deployment and issue Apps to it. Please help!!
Run the application 'Terminal.app' which you will find in '/Applications/Utilities' on your Macintosh.
Type this into it: defaults delete com.apple.configurator PreprationSavedPolicyDefaultsKey
Hit the return key.
If you get no error message, it worked, and you can quit the app. -
SSL VPN message "This (client) machine does not have the web access privilege."
Hello!
I am trying to configure the SSL VPN (WebVPN) and I am almost done but when clicking on the URL's I configured in the bookmarks, I get the message "This (client) machine does not have the web access privilege. Please contact your SSLVPN provider for assistance." I looked through the many tutorials and guides in existence and none talks about such error and the fix for it. In fact, if I search the net for this error message I get only one match, in the Cisco website, where is say that "The client computer does not meet the security criteria of having web access functionality through the SSL VPN gateway." and as fix it gave this tip "Check the URL to the gateway or contact the administrator if it persists." So, nothing on the website about what this issue is and how to fix it. I will provide my IOS configuration and hopefully someone will spot the issue. Here it goes:
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname R1
boot-start-marker
boot-end-marker
logging message-counter syslog
no logging buffered
enable secret 5 $1$1LLX$u7aTc8XfNqPZhPVGwEF/J0
enable password xxxxxxxx
aaa new-model
aaa authentication login userAuthen local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authorization network groupauthor local
aaa session-id common
crypto pki trustpoint TP-self-signed-1279712955
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1279712955
revocation-check none
rsakeypair TP-self-signed-1279712955
crypto pki certificate chain TP-self-signed-1279712955
certificate self-signed 01
3082023A 308201A3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31323739 37313239 3535301E 170D3130 30333233 31313030
33375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 32373937
31323935 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100A8EF 34E3E792 36660498 9801F934 E8A41865 3599EA35 B073AC91 D7A53AF4
A4390D2F CB3DB2DE 936B28F0 A25F3CE1 6F40FD9E E79096F2 F89620E0 B31A7B34
649BBA22 AE44CB55 9F38BF0C 2F2770CF 8380C167 C17D760C 380E28E4 FF7D6874
9EFC310A 2AA60835 F1AA384F CD1A0173 19C98192 EBFBD531 24CB9203 EA9E7D54
B2C30203 010001A3 62306030 0F060355 1D130101 FF040530 030101FF 300D0603
551D1104 06300482 02523130 1F060355 1D230418 30168014 0D9D62EC DA77EAF3
11ABF64D 933633F9 2BA362DC 301D0603 551D0E04 1604140D 9D62ECDA 77EAF311
ABF64D93 3633F92B A362DC30 0D06092A 864886F7 0D010104 05000381 81006853
48ED4E3E 5721C653 D9A2547C 36E4F0CB A6764B29 9AFFD30A 1B382C8C C6FDAA55
265BCF6C 51023F5D 4AF6E177 C76C4560 57DE5259 40DE4254 E79B3E13 ABD0A78D
7E0B623A 0F2D9C01 E72EF37D 5BAB72FF 65A176A1 E3709758 0229A66B 510F9AA2
495CBB4B 2CD721A7 D6F6EB43 65538BE6 B45550D7 A80A4504 E529D092 73CD
quit
dot11 syslog
ip source-route
ip dhcp excluded-address 192.168.0.1 192.168.0.10
ip dhcp pool myPOOL
network 192.168.0.0 255.255.255.0
default-router 192.168.0.1
dns-server 87.216.1.65 87.216.1.66
ip cef
ip name-server 87.216.1.65
ip name-server 87.216.1.66
ip ddns update method mydyndnsupdate
HTTP
add http://username:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
interval maximum 1 0 0 0
no ipv6 cef
multilink bundle-name authenticated
vpdn enable
vpdn-group pppoe
request-dialin
protocol pppoe
username cisco privilege 15 password 0 xxxxxxxx
crypto isakmp policy 3
encr 3des
authentication pre-share
group 2
crypto isakmp fragmentation
crypto isakmp client configuration group vpnclient
key cisco123
domain selfip.net
pool ippool
acl 110
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto dynamic-map dynmap 10
set transform-set myset
reverse-route
crypto map clientmap client authentication list userAuthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
archive
log config
hidekeys
interface Loopback0
ip address 10.11.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface Loopback2
description SSL VPN Website IP address
ip address 10.10.10.1 255.255.255.0
interface Loopback1
description SSL DHCP Pool Gateway Address
ip address 192.168.250.1 255.255.255.0
interface FastEthernet0
description $ES_LAN$
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
interface BRI0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet1
interface FastEthernet2
switchport access vlan 2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
bundle-enable
dsl operating-mode auto
interface Vlan1
no ip address
interface Dialer1
ip ddns update hostname myserver.selfip.net
ip ddns update mydyndnsupdate host members.dyndns.org
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip policy route-map VPN-Client
dialer pool 1
ppp chap hostname xxx
ppp chap password 0 xxxx
ppp pap sent-username xxx password 0 xxxx
crypto map clientmap
ip local pool ippool 192.168.50.100 192.168.50.200
ip local pool sslvpnpool 192.168.250.2 192.168.250.100
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
ip http authentication local
ip http secure-server
ip nat inside source static tcp 192.168.0.2 21 interface Dialer1 790
ip nat inside source static tcp 192.168.0.15 21 interface Dialer1 789
ip nat inside source list 102 interface Dialer1 overload
ip nat inside source static tcp 10.10.10.1 443 interface Dialer1 443
ip nat inside source static tcp 10.10.10.1 80 interface Dialer1 80
access-list 102 deny ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 102 permit ip 192.168.0.0 0.0.0.255 any
access-list 110 permit ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 144 permit ip 192.168.50.0 0.0.0.255 any
route-map VPN-Client permit 10
match ip address 144
set ip next-hop 10.11.0.2
control-plane
banner motd ^C
================================================================
UNAUTHORISED ACCESS IS PROHIBITED!!!
=================================================================
^C
line con 0
line aux 0
line vty 0 4
password mypassword
transport input telnet ssh
webvpn gateway MyGateway
ip address 10.10.10.1 port 443
http-redirect port 80
ssl trustpoint TP-self-signed-1279712955
inservice
webvpn install svc flash:/webvpn/svc_1.pkg sequence 1
webvpn install csd flash:/webvpn/sdesktop.pkg
webvpn context SecureMeContext
title "My SSL VPN Service"
secondary-color #C0C0C0
title-color #808080
ssl authenticate verify all
url-list "MyServers"
heading "My Intranet"
url-text "Cisco" url-value "http://192.168.0.2"
url-text "NetGear" url-value "http://192.168.0.3"
login-message "Welcome to My VPN"
policy group MyDefaultPolicy
url-list "MyServers"
functions svc-enabled
svc address-pool "sslvpnpool"
svc keep-client-installed
default-group-policy MyDefaultPolicy
aaa authentication list userAuthen
gateway MyGateway domain testvpn
max-users 100
csd enable
inservice
end
Thank you!Hi,
Please check SAP note:
2004579 - You cannot create a FR company from a Package
Thanks & Regards,
Nagarajan -
i'm trying to install iOS 5.0 but getting message that my computer does not have enough space to backup my iPad and continuing will result in loss of all media on iPad. an option seemed to be backing up on iCloud, but i think you have to have iOS 5.0 to install iCloud.
how do i install iOS 5.0 without losing anything on my iPad?If you really do not have enough space on your HDD for a backup of your iPad, you do not have enough space at all. Free up at least 15% of your HDD, in any case more than 0.8GB for the iPad update.
Make backups on an external disk.
After freeing up enough space, try again. -
how can I add location to a photo that does not have a gps location? On iPhoto it was easy.
You can use the Settings in the slideshow to Show Captions, either the Description filed be display, the Title field or both.
If you create the slideshow in iDVD from still photos from iPhoto you can add the Description and/or Title via the settings in iDVD.
Since iDVD adds both automatically the user must go thru the slideshow and remove those items not wanted. -
Can I share photostream with someone who does not use Apple devices?
If I share a photostream with someone who does not use Apple products, will they be able to view the Photostream?
Shared photoStreams are also available on a PC
How do friends and family view my photos?
Friends and family with iCloud accounts can view your photos in the Photos app on any device using iOS 6 or later; on a Mac in iPhoto 9.4 or Aperture 3.4 or later; on a Windows PC with Windows Vista or later and iCloud Control Panel 2.0 or later installed; or on a second generation or later Apple TV with software version 5.1 or later installed. They can also view your photos on the web if you enable Public Website in the settings or options for your Shared Photo Stream. Learn more about inviting people to view your shared photo streams.
Set up instructions for the PC are in my previous link
LN -
Can my IPod 4th generation send messages to people who don't have an IPhone or IPod?
I have updated my IPod and it isn't letting me send messages to other people who dont have an Apple Product. Why is that happening? Also my facetime isn't working. Why is that?
iMessage allows you to send unlimited text, photos, videos, locations, and contacts using Wi-Fi or 3G* from your iPhone, iPad, or iPod touch to other iOS 5 users. "
http://support.apple.com/kb/HT3529
What is the issue with facetime?
Maybe you are looking for
-
Error message when issuing a COMMIT in a store procedure
Hello experts, Please help. I have a problem where i cannot specify a COMMIT in a store procedure. I have the following error message: ================================================================= 00034, 00000, "cannot %s in current PL/SQL sessio
-
Home Mac Mini Yosemite Server and Time Capsule
Hello again, I''m looking to have a Mac Mini Yosemite home server with my dot com pointed to my fixed IP. I have a laptop, an iPad 2 and an iPhone 6 to manage in the beginning. It's mostly to practice skills for employment purposes. If I get the late
-
My Lumia 620,whenever i copied any file oe download it show multiple copy and if i delete one if it then it,s not runing.. i refresh my mobile also.. it ist show multiple file in during laptop connection.only in my Mobile it showing multiple copies S
-
Cannot tether nikon d810 to lightroom.
Does anybody know how to tether the nikon d810 to lightroom? It "does not recognize" the Nikon d810 but it "does" recognize" the Nikon d800 and will start the tether down load. Is there an update for cameras in lightroom?
-
Cannot complete your request because the scratch disks are full
When I attempt to crop a photo I get this message: Cannot complete your request because the scratch disks are full. In fact one scratch disk has 62+ GB and the other has 52+ GB available. Does anyone have a solution for this?