TS2756 hotspot iP4 connected to iPad2, unable to connect to internet

BT connection enabled, hotspot icon visible on iPad2, iP4 able to open a new page in Safari,
but: no blue stripe visible on iP4 what is a confirmation, that both devices work together
(previously spotted during connection with Windows7 notebook).
Wi-fi connection message: unable to connect to iP4 iOS 6.0.1
3G connection works fine, so iPad2 iOS6.0 is able to connect to internet.
Reseted network on both devices - to no avail.
Turned off and on both devices - to no avail.
Thank you all for your advise in advance.

There was a minute to find it out for a skilled Apple user: General-Cellular-Cellular data Network-Internet Tethering-APN.
There was nothing there.
The reason was, that iOS update cleared all that data including Cellular Data APN.
I have put only this and I have forgotten to put it all the way below to Internet Tethering.

Similar Messages

  • My FaceTime won't connect. Every time I try to call my friend it says connecting. Then unable to connect. Or lost connection. And when I go to our FaceTime history it said "FaceTime answered on another device." What can I do to fix this problem?

    My FaceTime won't connect. Every time I try to call my friend it says connecting. Then unable to connect. Or lost connection. And when I go to our FaceTime history it said "FaceTime answered on another device." What can I do to fix this problem? We always used to FaceTime. And now all of the suddenly we can't.

    Apple has released a document which is reported to address the recent FaceTime issue.
    http://support.apple.com/kb/TS5419

  • IPhone 4 - "could not connect to facebook - unable to connect to facebook. Please check your internet connection and try again" Message. Please Help?

    I keep receiving this message when trying to connect to facebook on my iPhone "could not connect to facebook - unable to connect to facebook. Please check your internet connection and try again" Could someone please help me?

    I was unable to connect to internet via any app. I have now turned my phone off and on again and all seems fine.
    Thanks for your help.

  • TS1398 When my iphone connects to wifi, everything else in my house will not connect to the internet. They all show 3 to 4 bars on connection strength, but unable to access the internet.  The second I turn off the wifi on my iphone, everything runs perfec

    When my iphone connects to wifi, everything else in my house will not connect to the internet. They all show 3 to 4 bars on connection strength, but unable to access the internet.  The second I turn off the wifi on my iphone, everything in my house runs fine. What is going on?

    Had a similar problem a number of years ago with a laptop my daughter had. The probelm turned out to be the router. What kind of router do you have? Have you checked for firmware updates, or at least tried re-booting it?

  • Ipod Touch 3G, Although connected to wifi, unable to connect to internet

    Basically the problem is that my Ipod Touch 3G is unable to connect to the internet, even though I am connected to the Wifi network. Are there any suggestions? I have read through the Apple Troubleshooting (tried resetting, setting static IP, etc.)
    Thanks

    I'm having the exact same problem with my 3GS running iOS4, however my iPd Touch can connect to the internet fine. I can connect to the wi-fi, but connecting to webpages and browsing or checking hotmail etc, no such luck. I have also setup a static ip address and also authourised the MAC address of the device on the BTHomeHub router.

  • Ipad not connecting to wifi, "unable to connect"

    So i have done everything from turning off and on, network reset, and reseting the entire ipad to factory settings. Nothing has helped. The wierd thing is once I got a airport express, my ipad would only connect to that and nothing else. Or it connects in the apple store or at my school where this is a big network. My wifi recognizes other networks but won't connect to them. This is extremely frustrating because when I want to connect at friends places it doesn't connect, it immediately says "unable to connect", we tried reseting the router, we even tried playing with the frequencies on the router, I've also tried at other places and its the same problem. I've never had a problem with apple products until now. Someone please help me because I don't what else to do. By the way this is a Ipad 3 and I have the latest software update as well.

    I have the same issues!! Please apple get this fix soon! It's starting to get really frustrating        

  • Ipad2 unable to connect to wireless network (ipad3 are OK).

    Hi, we have setup a wireless network available for our customers with Web-Passthrough security. We have no issues with any customers' laptop and certain Blackberry devices but we do have issues with customers' ipad2 and some of newer Blackberry models (like Bold 9900). These units can see the wireless network, attempting to connect but with no success. Ipad3 have no issues. Majority of our customers are having ipad2 so wondering what could be done to solve this issue.
    Appreciate your help and input.

    here some debug outputs>
    (Cisco Controller) >debug client 74:e1:b6:90:ac:61
    (Cisco Controller) >*apfReceiveTask: Sep 24 14:51:03.789: 74:e1:b6:90:ac:61 10.65.57.43 WEBAUTH_REQD (8) Web-Auth Policy timeout
    *apfReceiveTask: Sep 24 14:51:03.789: 74:e1:b6:90:ac:61 10.65.57.43 WEBAUTH_REQD (8) Pem timed out, Try to delete client in 10 secs.
    *apfReceiveTask: Sep 24 14:51:03.789: 74:e1:b6:90:ac:61 Scheduling deletion of Mobile Station:  (callerId: 12) in 10 seconds
    *osapiBsnTimer: Sep 24 14:51:13.789: 74:e1:b6:90:ac:61 apfMsExpireCallback (apf_ms.c:608) Expiring Mobile!
    *apfReceiveTask: Sep 24 14:51:13.789: 74:e1:b6:90:ac:61 apfMsExpireMobileStation (apf_ms.c:5009) Changing state for mobile 74:e1:b6:90:ac:61 on AP 08:17:35:83:96:90 from Associated to Disassociated
    *apfReceiveTask: Sep 24 14:51:13.789: 74:e1:b6:90:ac:61 Scheduling deletion of Mobile Station:  (callerId: 45) in 10 seconds
    *spamApTask4: Sep 24 14:51:15.256: 74:e1:b6:90:ac:61 Received Idle-Timeout from AP 08:17:35:83:96:90, slot 0 for STA 74:e1:b6:90:ac:61
    *spamApTask4: Sep 24 14:51:15.256: 74:e1:b6:90:ac:61 apfMsDeleteByMscb Scheduling mobile for deletion with deleteReason 4, reasonCode 4
    *spamApTask4: Sep 24 14:51:15.256: 74:e1:b6:90:ac:61 Scheduling deletion of Mobile Station:  (callerId: 30) in 1 seconds
    *osapiBsnTimer: Sep 24 14:51:16.189: 74:e1:b6:90:ac:61 apfMsExpireCallback (apf_ms.c:608) Expiring Mobile!
    *apfReceiveTask: Sep 24 14:51:16.191: 74:e1:b6:90:ac:61 Sent Deauthenticate to mobile on BSSID 08:17:35:83:96:90 slot 0(caller apf_ms.c:5094)
    *apfReceiveTask: Sep 24 14:51:16.191: 74:e1:b6:90:ac:61 apfMsAssoStateDec
    *apfReceiveTask: Sep 24 14:51:16.191: 74:e1:b6:90:ac:61 apfMsExpireMobileStation (apf_ms.c:5132) Changing state for mobile 74:e1:b6:90:ac:61 on AP 08:17:35:83:96:90 from Disassociated to Idle
    *apfReceiveTask: Sep 24 14:51:16.191: 74:e1:b6:90:ac:61 10.65.57.43 WEBAUTH_REQD (8) Deleted mobile LWAPP rule on AP [08:17:35:83:96:90]
    *apfReceiveTask: Sep 24 14:51:16.191: 74:e1:b6:90:ac:61 Deleting mobile on AP 08:17:35:83:96:90(0)
    *pemReceiveTask: Sep 24 14:51:16.192: 74:e1:b6:90:ac:61 10.65.57.43 Unable to delete token entry
    *pemReceiveTask: Sep 24 14:51:16.192: 74:e1:b6:90:ac:61 10.65.57.43 Removed NPU entry.
    *apfMsConnTask_7: Sep 24 14:53:46.702: 74:e1:b6:90:ac:61 Adding mobile on LWAPP AP 08:17:35:83:96:90(0)
    *apfMsConnTask_7: Sep 24 14:53:46.702: 74:e1:b6:90:ac:61 Association received from mobile on AP 08:17:35:83:96:90
    *apfMsConnTask_7: Sep 24 14:53:46.702: 74:e1:b6:90:ac:61 0.0.0.0 START (0) Changing ACL 'none' (ACL ID 0) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1621)
    *apfMsConnTask_7: Sep 24 14:53:46.702: 74:e1:b6:90:ac:61 Applying site-specific IPv6 override for station 74:e1:b6:90:ac:61 - vapId 10, site 'default-group', interface 'management'
    *apfMsConnTask_7: Sep 24 14:53:46.702: 74:e1:b6:90:ac:61 Applying IPv6 Interface Policy for station 74:e1:b6:90:ac:61 - vlan 0, interface id 0, interface 'management'
    *apfMsConnTask_7: Sep 24 14:53:46.702: 74:e1:b6:90:ac:61 STA - rates (8): 4 139 150 36 48 72 96 108 0 0 0 0 0 0 0 0
    *apfMsConnTask_7: Sep 24 14:53:46.703: 74:e1:b6:90:ac:61 STA - rates (11): 4 139 150 36 48 72 96 108 12 18 24 0 0 0 0 0
    *apfMsConnTask_7: Sep 24 14:53:46.703: 74:e1:b6:90:ac:61 0.0.0.0 START (0) Initializing policy
    *apfMsConnTask_7: Sep 24 14:53:46.703: 74:e1:b6:90:ac:61 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state AUTHCHECK (2)
    *apfMsConnTask_7: Sep 24 14:53:46.703: 74:e1:b6:90:ac:61 0.0.0.0 AUTHCHECK (2) Change state to L2AUTHCOMPLETE (4) last state L2AUTHCOMPLETE (4)
    *apfMsConnTask_7: Sep 24 14:53:46.703: 74:e1:b6:90:ac:61 0.0.0.0 L2AUTHCOMPLETE (4) DHCP Not required on AP 08:17:35:83:96:90 vapId 10 apVapId 10for this client
    *apfMsConnTask_7: Sep 24 14:53:46.703: 74:e1:b6:90:ac:61 Not Using WMM Compliance code qosCap 00
    *apfMsConnTask_7: Sep 24 14:53:46.703: 74:e1:b6:90:ac:61 0.0.0.0 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 08:17:35:83:96:90 vapId 10 apVapId 10
    *apfMsConnTask_7: Sep 24 14:53:46.703: 74:e1:b6:90:ac:61 0.0.0.0 L2AUTHCOMPLETE (4) Change state to DHCP_REQD (7) last state DHCP_REQD (7)
    *apfMsConnTask_7: Sep 24 14:53:46.703: 74:e1:b6:90:ac:61 apfMsAssoStateInc
    *apfMsConnTask_7: Sep 24 14:53:46.703: 74:e1:b6:90:ac:61 apfPemAddUser2 (apf_policy.c:223) Changing state for mobile 74:e1:b6:90:ac:61 on AP 08:17:35:83:96:90 from Idle to Associated
    *apfMsConnTask_7: Sep 24 14:53:46.703: 74:e1:b6:90:ac:61 Scheduling deletion of Mobile Station:  (callerId: 49) in 28800 seconds
    *apfMsConnTask_7: Sep 24 14:53:46.703: 74:e1:b6:90:ac:61 Sending Assoc Response to station on BSSID 08:17:35:83:96:90 (status 0) ApVapId 10 Slot 0
    *apfMsConnTask_7: Sep 24 14:53:46.703: 74:e1:b6:90:ac:61 apfProcessAssocReq (apf_80211.c:5241) Changing state for mobile 74:e1:b6:90:ac:61 on AP 08:17:35:83:96:90 from Associated to Associated
    *apfMsConnTask_7: Sep 24 14:53:46.703: 74:e1:b6:90:ac:61 0.0.0.0 DHCP_REQD (7) State Update from Mobility-Incomplete to Mobility-Complete, mobility role=Local, client state=APF_MS_STATE_ASSOCIATED
    *apfMsConnTask_7: Sep 24 14:53:46.703: 74:e1:b6:90:ac:61 0.0.0.0 DHCP_REQD (7) pemAdvanceState2 4431, Adding TMP rule
    *apfMsConnTask_7: Sep 24 06:43:06.703: 74:e1:b6:90:ac:61 0.0.0.0 DHCP_REQD (7) Adding Fast Path rule
      type = Airespace AP - Learn IP address
      on AP 08:17:35:83:96:90, slot 0, interface = 13, QOS = 3
      ACL Id = 255, Jumbo F
    *apfMsConnTask_7: Sep 24 14:53:46.703: 74:e1:b6:90:ac:61 0.0.0.0 DHCP_REQD (7) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 7006  IPv6 Vlan = 0, IPv6 intf id = 0
    *apfMsConnTask_7: Sep 24 14:53:46.703: 74:e1:b6:90:ac:61 0.0.0.0 DHCP_REQD (7) Successfully plumbed mobile rule (ACL ID 255)
    *pemReceiveTask: Sep 24 14:53:46.705: 74:e1:b6:90:ac:61 0.0.0.0 tokenID = 8
    *pemReceiveTask: Sep 24 14:53:46.705: 74:e1:b6:90:ac:61 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
    *apfMsConnTask_7: Sep 24 14:53:46.930: 74:e1:b6:90:ac:61 Updating AID for REAP AP Client 08:17:35:83:96:90 - AID ===> 1
    *DHCP Socket Task: Sep 24 14:53:48.313: 74:e1:b6:90:ac:61 DHCP received op BOOTREPLY (2) (len 313,vlan 0, port 13, encap 0xec03)
    *DHCP Socket Task: Sep 24 14:53:48.314: 74:e1:b6:90:ac:61 DHCP processing DHCP OFFER (2)
    *DHCP Socket Task: Sep 24 14:53:48.314: 74:e1:b6:90:ac:61 DHCP   op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
    *DHCP Socket Task: Sep 24 14:53:48.314: 74:e1:b6:90:ac:61 DHCP   xid: 0xd2fa8f04 (3539635972), secs: 0, flags: 0
    *DHCP Socket Task: Sep 24 14:53:48.314: 74:e1:b6:90:ac:61 DHCP   chaddr: 74:e1:b6:90:ac:61
    *DHCP Socket Task: Sep 24 14:53:48.314: 74:e1:b6:90:ac:61 DHCP   ciaddr: 0.0.0.0,  yiaddr: 10.65.57.43
    *DHCP Socket Task: Sep 24 14:53:48.314: 74:e1:b6:90:ac:61 DHCP   siaddr: 0.0.0.0,  giaddr: 0.0.0.0
    *DHCP Socket Task: Sep 24 14:53:48.314: 74:e1:b6:90:ac:61 DHCP   server id: 10.65.56.2  rcvd server id: 10.65.56.2
    *DHCP Socket Task: Sep 24 14:53:49.511: 74:e1:b6:90:ac:61 DHCP received op BOOTREPLY (2) (len 313,vlan 0, port 13, encap 0xec03)
    *DHCP Socket Task: Sep 24 14:53:49.511: 74:e1:b6:90:ac:61 DHCP processing DHCP ACK (5)
    *DHCP Socket Task: Sep 24 14:53:49.511: 74:e1:b6:90:ac:61 DHCP   op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
    *DHCP Socket Task: Sep 24 14:53:49.511: 74:e1:b6:90:ac:61 DHCP   xid: 0xd2fa8f04 (3539635972), secs: 0, flags: 0
    *DHCP Socket Task: Sep 24 14:53:49.511: 74:e1:b6:90:ac:61 DHCP   chaddr: 74:e1:b6:90:ac:61
    *DHCP Socket Task: Sep 24 14:53:49.511: 74:e1:b6:90:ac:61 DHCP   ciaddr: 0.0.0.0,  yiaddr: 10.65.57.43
    *DHCP Socket Task: Sep 24 14:53:49.511: 74:e1:b6:90:ac:61 DHCP   siaddr: 0.0.0.0,  giaddr: 0.0.0.0
    *DHCP Socket Task: Sep 24 14:53:49.511: 74:e1:b6:90:ac:61 DHCP   server id: 10.65.56.2  rcvd server id: 10.65.56.2
    *DHCP Socket Task: Sep 24 14:53:49.511: 74:e1:b6:90:ac:61 Adding Web RuleID 1231594 for mobile 74:e1:b6:90:ac:61
    *DHCP Socket Task: Sep 24 14:53:49.511: 74:e1:b6:90:ac:61 10.65.57.43 DHCP_REQD (7) Change state to WEBAUTH_REQD (8) last state WEBAUTH_REQD (8)
    *DHCP Socket Task: Sep 24 14:53:49.511: 74:e1:b6:90:ac:61 10.65.57.43 WEBAUTH_REQD (8) pemAdvanceState2 5170, Adding TMP rule
    *DHCP So: Sep 24 14:53:49.511: 74:e1:b6:90:ac:61 10.65.57.43 WEBAUTH_REQD (8) Replacing Fast Path rule
      type = Airespace AP Client - ACL passthru
      on AP 08:17:35:83:96:90, slot 0, interface = 13, QOS = 3
      ACL Id =
    *DHCP Socket Task: Sep 24 14:53:49.512: 74:e1:b6:90:ac:61 10.65.57.43 WEBAUTH_REQD (8) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 8  IPv6 Vlan = 0, IPv6 intf id = 0
    *DHCP Socket Task: Sep 24 14:53:49.512: 74:e1:b6:90:ac:61 10.65.57.43 WEBAUTH_REQD (8) Successfully plumbed mobile rule (ACL ID 255)
    *DHCP Socket Task: Sep 24 14:53:49.512: 74:e1:b6:90:ac:61 Plumbing web-auth redirect rule due to user logout
    *DHCP Socket Task: Sep 24 14:53:49.512: 74:e1:b6:90:ac:61 Assigning Address 10.65.57.43 to mobile
    *DHCP Socket Task: Sep 24 14:53:49.512: 74:e1:b6:90:ac:61 DHCP success event for client. Clearing dhcp failure count for interface management.
    *pemReceiveTask: Sep 24 14:53:49.513: 74:e1:b6:90:ac:61 10.65.57.43 tokenID = 8

  • Can't connect to skype "unable to connect to ser...

    I can't connect to skype from my MacBook:   "unable to conect to server"
    help!

    Not quite sure why I have to go through a community registration process just to post a comment to help another Skype user but there it is.
    In my experience this message is very poor user feedback from Skype, becuase what it actually means is "your version of Skype is out of date, and you can't connect until you update to the latest version." So try updating.
    This is painful when you use it to stay in touch with family on the other side of the world because you waste your wondow to communicate doing IT support for your relatives just to get it to work - updates are way too frequent. It seems like a severe product failure to me to not even allow login, and not tell us why.

  • IPod won't connect to wifi, "Unable to connect to _____"?

    I have an iPod that is a little under a year old. I got it in January of last year. I have 4.2.1 on it now, but shortly before I installed it my iPod wouldn't connect to any different wifi. I took it to a library and it wouldn't connect there, and it won't connect at home. I restored my iPod, I reset the network settings, I unplugged the wifi and plugged it back in again. Everything else, including my brother's iPod, connects to the wifi fine. What can I do?

    bananaasplittt wrote:
    I have an iPod that is a little under a year old. I got it in January of last year. I have 4.2.1 on it now, but shortly before I installed it my iPod wouldn't connect to any different wifi. I took it to a library and it wouldn't connect there, and it won't connect at home. I restored my iPod, I reset the network settings, I unplugged the wifi and plugged it back in again. Everything else, including my brother's iPod, connects to the wifi fine. What can I do?
    You've tried about everything you can do. It might be time to contact Apple support for some advice. Since your iPod doesn't connect to any network it may need repair.

  • I am having trouble activating my verizon 3g connection i am unable to access the internet currently may that b the issue? i am having trouble activating my verizon 3g connection i am unable to access the internet currently may that b the issue

    RE: having trouble acessing my 3g network.Could my problem b that i have no internet connection to allow access to bring up my cellular account?

    Either take it into your nearest Verizon Store or call Verizon and follow the prompts for technical support. They will walk you through setting it up. 800-922-0204

  • My iPod 5 can't connect to wifi. It connects to personal hotspots but no to my home wifi. I tried resetting the network settings but no change. I put the right password but it just keeps loading forever. What should I do??

    My iPod 5 can't connect to wifi. It connects to personal hotspots but no to my home wifi. I tried resetting the network settings but no change. I put the right password but it just keeps loading forever. What should I do??

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I am new to IPod touch and really enjoying it.  BUT.  All of a sudden I am unable to connect to my home wireless network nor any hot spots.  Did not have any trouble in 1st month and yet something seems to have changed.  Any suggestions as to what ?

    I am new to IPod Touch and enjoying but all of a sudden (after about a month of connection) I am unable to connect to either my home wirless or hotspots outside of home.  It would appear that a setting has changed but have no idea how to determine.  Any suggestions ?

    NO I did not and thank you very much for the advice.  My problem was stated incorrectly in that while I am able to connect to the wireless from that point on I am unable to connect to the internet.  I will check the article referred to.

  • IPad mini doesn't detect wifi/unable to connect

    Hello,
    I've had my iPad mini since March 2014. It's been working perfectly until last Friday, when it suddenly stopped connecting to my home wifi network. Upon closer inspection, I found that the iPad doesn't even detect the home network anymore. I tried all the solutions listed on here: resetting network settings, rebooting, resetting all settings - except a total restore.
    At times it started detecting the network but then when I try to connect it says "unable to connect". I tried making a hotspot out of my iPhone 3G and connecting to it with my iPad - also the same thing, unable to connect. I couldn't try any other networks yet.
    What should I do next? Could this be a hardware issue? PS: I've never dropped or damaged the iPad in any way, and it was just lying on the day when wifi stopped working.
    Thank you.

    Hello karinakremlin,
    Thank you for using Apple Support Communities.
    You can use this article to troubleshoot your Wi-Fi connection issues. You have said you have tried many of these steps already, but I would recommend following this article in case there is something you missed.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Regards,
    Jeff D.

  • Unable to connect via wireless, printer is online.

    I am using a Photosmart plus 209a via wireless.  There are 3 notebooks connected. 2 will print but my Dell Studio (Win 7 Pro) will not. It was previously connected but now unable to connect.  I have uninstalled all components using level 3 twice. Have used the Print/Scan tool.  Downloaded the full SW package and the Basic driver SW. I process a job and it gets to the spooler and then "print job failed".  I can view the control panel via IP address. I can view network settings and print wireless test page through HP Solution Center.  Why am I unable to connect?  I was able to use via USB but this is not an option.

    It sounds like there is something different on the Dell Studio since it works from two other computers on the same network as the Dell Studio.  It also sounds like you are able to access the EWS of the printer by using its IP address.
    Are there any other errors messages regarding the printer?  If so, what are they?
    Is there a third party firewall installed (e.g. Norton, Kasperksy, BitDefender, etc.)?
    Is this Windows 7 Professional 32bit or 64bit?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • I have a 5th generation iPod touch that is suddenly "unable to connect to the server", not entirely sure what this means but I'm unable to connect to the internet even though I'm connected to Wifi. Can't connect to iTunes on my pc either. Any input?

    I have a 16GB iPod touch that suddenly stopped connecting to the internet last night. Everytime I try to get mail, or access anything with Safari I get a message saying that it can't connect to the server. Also I've plugged it in to my home computer but it won't connect to iTunes either. I haven't updated to iOS8 yet as I didn't have enough space for it and I had planned on deleting all my music files, updating the software and putting whatever music I could fit back on to the device afterward, but now I'm hesitant to do that as I have no way to get any of the files back onto the device. Could this be because I haven't updated to iOS8 yet? I've been having other problems such as apps crashing unexpectedly lately as well, for example my music shuts off randomly and apps such as Twitter and Tumblr and a few others crash on launch. I'm definitely not a genius when it comes to technology by any means, so I have no idea what's causing this problem or how to fix it, any help would be greatly appreciated!

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • Hi I am unable to install itunes on my Windows 8 64 bit PC, can you help please

    Hi I am unable to install itunes on my Windows 8 64 bit PC, can you help please

  • Reports with business knowledge

    Hi Friends, Please suggest me some links which enables me to understand abap reports with data flow from one table to others like reports with SD tables, reports with MM tables like that. Hope you understood. I will be thankful for your. Thanks and r

  • How To Add arabic languge 4 Nokia 6234

    How To Add arabic languge 4 Nokia 6234 ??? i have nokia 6234 I wont to add arabic languge to my phone languges ? how can i do this .

  • Historical data and Column Chart

    Hello I am trying to retrive historical data from the repository and show it as a column chart through flex UI Implementation. My Metric is defined as below and it has two columns defined as KEY columns <Metric NAME="EnergyConsumptionCost" TYPE="TABL

  • How to activate an unsupported sim i5 (on unlocked phone5)

    Hello. I am trying to unlock a phone for someone using their new Simple Mobile carrier. I read online that Simple Mobile uses Tmobile towers, so the iphone can work if it is unlocked. I have also unlocked my own iphone for tmobile, so I know this is